After doing critical updates to Ubuntu, wvdialconf replies "Sorry, no
modem was detected!.."
I get a similar result after using the "Detect" button in GNOME PPP:
"No modem was found on your system."
Yet the command-line "discover" utility shows "Conexant HCF 56k
Data/Fax Modem" right at the top.
The modem had been working fine, but then apparently the Ubuntu Update
Manager changed kernel from 2.6.27_7 to 2.6.27_11, and I have upgraded
the modem driver accordingly, and I have also fooled around with
setserial, but still no joy.
Cheers,
-Dave Alkire
CPU0
0: 218 IO-APIC-edge timer
1: 669 IO-APIC-edge i8042
4: 2 IO-APIC-edge
7: 0 IO-APIC-edge parport0
8: 2 IO-APIC-edge rtc0
9: 0 IO-APIC-fasteoi acpi
12: 23794 IO-APIC-edge i8042
14: 10061 IO-APIC-edge ata_piix
15: 26816 IO-APIC-edge ata_piix
19: 0 IO-APIC-fasteoi uhci_hcd:usb1
22: 1319 IO-APIC-fasteoi EMU10K1
23: 1309 IO-APIC-fasteoi uhci_hcd:usb2, eth0
NMI: 0 Non-maskable interrupts
LOC: 51412 Local timer interrupts
RES: 0 Rescheduling interrupts
CAL: 0 function call interrupts
TLB: 0 TLB shootdowns
SPU: 0 Spurious interrupts
ERR: 0
MIS: 0
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.27-11-generic (buildd@rothera) (gcc version 4.3.2 (Ubuntu 4.3.2-1ubuntu11) ) #1 SMP Thu Jan 29 19:24:39 UTC 2009 (Ubuntu 2.6.27-11.27-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 0000000017fc0000 (usable)
[ 0.000000] BIOS-e820: 0000000017fc0000 - 0000000017ff8000 (ACPI data)
[ 0.000000] BIOS-e820: 0000000017ff8000 - 0000000018000000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffb80000 - 00000000ffc00000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.3 present.
[ 0.000000] last_pfn = 0x17fc0 max_arch_pfn = 0x100000
[ 0.000000] kernel direct mapping tables up to 17fc0000 @ 7000-d000
[ 0.000000] RAMDISK: 177e1000 - 17fafd65
[ 0.000000] ACPI: RSDP 000FF980, 0014 (r0 AMI )
[ 0.000000] ACPI: RSDT 17FF0000, 002C (r1 D850GB G285010A 20020401 MSFT 1011)
[ 0.000000] ACPI: FACP 17FF1000, 0074 (r1 D850GB GB85010A 20020401 MSFT 1011)
[ 0.000000] ACPI: DSDT 17FE0000, 2E67 (r1 D850GB GB85010A 2 MSFT 100000B)
[ 0.000000] ACPI: FACS 17FF8000, 0040
[ 0.000000] ACPI: APIC 17FE2E67, 0068 (r1 D850GB GB85010A 20020401 MSFT 1011)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 383MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 17fc0000
[ 0.000000] low ram: 00000000 - 17fc0000
[ 0.000000] bootmap 00002000 - 00004ff8
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 0017fc0000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0000100000 - 00005c29e0] TEXT DATA BSS ==> [0000100000 - 00005c29e0]
[ 0.000000] #4 [00177e1000 - 0017fafd65] RAMDISK ==> [00177e1000 - 0017fafd65]
[ 0.000000] #5 [00005c3000 - 00005c6000] INIT_PG_TABLE ==> [00005c3000 - 00005c6000]
[ 0.000000] #6 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
[ 0.000000] #7 [0000007000 - 0000009000] PGTABLE ==> [0000007000 - 0000009000]
[ 0.000000] #8 [0000002000 - 0000005000] BOOTMAP ==> [0000002000 - 0000005000]
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x00017fc0
[ 0.000000] HighMem 0x00017fc0 -> 0x00017fc0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x00017fc0
[ 0.000000] On node 0 totalpages: 98143
[ 0.000000] free_area_init_node: node 0, pgdat c048c680, node_mem_map c1000000
[ 0.000000] DMA zone: 3963 pages, LIFO batch:0
[ 0.000000] Normal zone: 93316 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 2 CPUs, 1 hotplug CPUs
[ 0.000000] mapped APIC to ffffb000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 20000000 (gap: 18000000:e6c00000)
[ 0.000000] PERCPU: Allocating 41628 bytes of per cpu data
[ 0.000000] NR_CPUS: 64, nr_cpu_ids: 2, nr_node_ids 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 97279
[ 0.000000] Kernel command line: root=UUID=0d1c9d78-ee2f-479f-969b-ae2ed64e2d9a ro quiet splash
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes)
[ 0.000000] TSC: PIT calibration confirmed by PMTIMER.
[ 0.000000] TSC: using PMTIMER calibration value
[ 0.000000] Detected 1495.448 MHz processor.
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.004000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.004000] Memory: 375612k/392960k available (2576k kernel code, 16872k reserved, 1165k data, 424k init, 0k highmem)
[ 0.004000] virtual kernel memory layout:
[ 0.004000] fixmap : 0xffc77000 - 0xfffff000 (3616 kB)
[ 0.004000] pkmap : 0xff400000 - 0xff800000 (4096 kB)
[ 0.004000] vmalloc : 0xd8800000 - 0xff3fe000 ( 619 MB)
[ 0.004000] lowmem : 0xc0000000 - 0xd7fc0000 ( 383 MB)
[ 0.004000] .init : 0xc04ad000 - 0xc0517000 ( 424 kB)
[ 0.004000] .data : 0xc03840da - 0xc04a7680 (1165 kB)
[ 0.004000] .text : 0xc0100000 - 0xc03840da (2576 kB)
[ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated
[ 0.004000] SLUB: Genslabs=12, HWalign=128, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.004016] Calibrating delay loop (skipped), value calculated using timer frequency.. 2990.89 BogoMIPS (lpj=5981792)
[ 0.004052] Security Framework initialized
[ 0.004065] SELinux: Disabled at boot.
[ 0.004106] AppArmor: AppArmor initialized
[ 0.004126] Mount-cache hash table entries: 512
[ 0.004498] Initializing cgroup subsys ns
[ 0.004509] Initializing cgroup subsys cpuacct
[ 0.004515] Initializing cgroup subsys memory
[ 0.004549] CPU: Trace cache: 12K uops, L1 D cache: 8K
[ 0.004558] CPU: L2 cache: 256K
[ 0.004563] CPU: Hyper-Threading is disabled
[ 0.004589] Checking 'hlt' instruction... OK.
[ 0.021787] SMP alternatives: switching to UP code
[ 0.036022] ACPI: Core revision 20080609
[ 0.040728] ACPI: Checking initramfs for custom DSDT
[ 0.723576] ENABLING IO-APIC IRQs
[ 0.723784] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.763481] CPU0: Intel(R) Pentium(R) 4 CPU 1500MHz stepping 07
[ 0.764031] Brought up 1 CPUs
[ 0.764031] Total of 1 processors activated (2990.89 BogoMIPS).
[ 0.764031] CPU0 attaching NULL sched-domain.
[ 0.764031] net_namespace: 840 bytes
[ 0.764031] Booting paravirtualized kernel on bare hardware
[ 0.764031] Time: 3:10:38 Date: 02/07/09
[ 0.764031] NET: Registered protocol family 16
[ 0.764031] EISA bus registered
[ 0.764031] ACPI: bus type pci registered
[ 0.764031] PCI: PCI BIOS revision 2.10 entry at 0xfda95, last bus=2
[ 0.764031] PCI: Using configuration type 1 for base access
[ 0.765997] ACPI: EC: Look up EC in DSDT
[ 0.777926] ACPI: Interpreter enabled
[ 0.777940] ACPI: (supports S0 S1 S4 S5)
[ 0.777976] ACPI: Using IOAPIC for interrupt routing
[ 0.790338] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.790517] PCI: 0000:00:00.0 reg 10 32bit mmio: [f8000000, fbffffff]
[ 0.790737] pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH4 ACPI/GPIO/TCO
[ 0.790745] pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH4 GPIO
[ 0.790797] PCI: 0000:00:1f.1 reg 20 io port: [ffa0, ffaf]
[ 0.790871] PCI: 0000:00:1f.2 reg 20 io port: [ef40, ef5f]
[ 0.790943] PCI: 0000:00:1f.3 reg 20 io port: [efa0, efaf]
[ 0.791014] PCI: 0000:00:1f.4 reg 20 io port: [ef80, ef9f]
[ 0.791092] PCI: 0000:01:00.0 reg 10 32bit mmio: [fd000000, fdffffff]
[ 0.791102] PCI: 0000:01:00.0 reg 14 32bit mmio: [e8000000, efffffff]
[ 0.791132] PCI: 0000:01:00.0 reg 30 32bit mmio: [fe5f0000, fe5fffff]
[ 0.791199] PCI: bridge 0000:00:01.0 32bit mmio: [fc500000, fe5fffff]
[ 0.791206] PCI: bridge 0000:00:01.0 32bit mmio pref: [e4200000, f42fffff]
[ 0.791271] PCI: 0000:02:0a.0 reg 10 io port: [df40, df5f]
[ 0.791327] pci 0000:02:0a.0: supports D1
[ 0.791331] pci 0000:02:0a.0: supports D2
[ 0.791368] PCI: 0000:02:0a.1 reg 10 io port: [dff0, dff7]
[ 0.791423] pci 0000:02:0a.1: supports D1
[ 0.791427] pci 0000:02:0a.1: supports D2
[ 0.791475] PCI: 0000:02:0b.0 reg 10 32bit mmio: [feaff000, feafffff]
[ 0.791485] PCI: 0000:02:0b.0 reg 14 io port: [df00, df3f]
[ 0.791496] PCI: 0000:02:0b.0 reg 18 32bit mmio: [fe900000, fe9fffff]
[ 0.791524] PCI: 0000:02:0b.0 reg 30 32bit mmio: [fe800000, fe8fffff]
[ 0.791545] pci 0000:02:0b.0: supports D1
[ 0.791549] pci 0000:02:0b.0: supports D2
[ 0.791553] pci 0000:02:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.791561] pci 0000:02:0b.0: PME# disabled
[ 0.791600] PCI: 0000:02:0c.0 reg 10 32bit mmio: [feae0000, feaeffff]
[ 0.791610] PCI: 0000:02:0c.0 reg 14 io port: [dfe0, dfe7]
[ 0.791660] pci 0000:02:0c.0: PME# supported from D0 D3hot D3cold
[ 0.791667] pci 0000:02:0c.0: PME# disabled
[ 0.791701] pci 0000:00:1e.0: transparent bridge
[ 0.791709] PCI: bridge 0000:00:1e.0 io port: [d000, dfff]
[ 0.791716] PCI: bridge 0000:00:1e.0 32bit mmio: [fe600000, feafffff]
[ 0.791724] PCI: bridge 0000:00:1e.0 32bit mmio pref: [f4300000, f43fffff]
[ 0.791742] bus 00 -> node 0
[ 0.791762] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.792134] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
[ 0.795994] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 0.796283] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[ 0.796535] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.796803] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[ 0.797056] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.797312] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.797566] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
[ 0.797819] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[ 0.798158] ACPI: Power Resource [FDDP] (off)
[ 0.798240] ACPI: Power Resource [URP1] (off)
[ 0.798326] ACPI: Power Resource [URP2] (off)
[ 0.798406] ACPI: Power Resource [LPTP] (off)
[ 0.798630] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 0.798732] pnp: PnP ACPI init
[ 0.798754] ACPI: bus type pnp registered
[ 0.806114] pnp: PnP ACPI: found 12 devices
[ 0.806121] ACPI: ACPI bus type pnp unregistered
[ 0.806130] PnPBIOS: Disabled by ACPI PNP
[ 0.807096] PCI: Using ACPI for IRQ routing
[ 0.807351] NET: Registered protocol family 8
[ 0.807351] NET: Registered protocol family 20
[ 0.807351] NetLabel: Initializing
[ 0.807351] NetLabel: domain hash size = 128
[ 0.807351] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.807351] NetLabel: unlabeled traffic allowed by default
[ 0.808853] tracer: 772 pages allocated for 65536 entries of 48 bytes
[ 0.808860] actual entries 65620
[ 0.809143] AppArmor: AppArmor Filesystem Enabled
[ 0.809175] ACPI: RTC can wake from S4
[ 0.809312] system 00:0b: iomem range 0x0-0x9ffff could not be reserved
[ 0.809320] system 00:0b: iomem range 0xe0000-0xfffff could not be reserved
[ 0.809326] system 00:0b: iomem range 0x100000-0x17ffffff could not be reserved
[ 0.809334] system 00:0b: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.809340] system 00:0b: iomem range 0xfee00000-0xfee00fff could not be reserved
[ 0.845322] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.845329] pci 0000:00:01.0: IO window: disabled
[ 0.845338] pci 0000:00:01.0: MEM window: 0xfc500000-0xfe5fffff
[ 0.845346] pci 0000:00:01.0: PREFETCH window: 0x000000e4200000-0x000000f42fffff
[ 0.845360] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02
[ 0.845367] pci 0000:00:1e.0: IO window: 0xd000-0xdfff
[ 0.845376] pci 0000:00:1e.0: MEM window: 0xfe600000-0xfeafffff
[ 0.845384] pci 0000:00:1e.0: PREFETCH window: 0x000000f4300000-0x000000f43fffff
[ 0.845413] pci 0000:00:1e.0: setting latency timer to 64
[ 0.845421] bus: 00 index 0 io port: [0, ffff]
[ 0.845425] bus: 00 index 1 mmio: [0, ffffffff]
[ 0.845430] bus: 01 index 0 mmio: [0, 0]
[ 0.845434] bus: 01 index 1 mmio: [fc500000, fe5fffff]
[ 0.845438] bus: 01 index 2 mmio: [e4200000, f42fffff]
[ 0.845442] bus: 01 index 3 mmio: [0, 0]
[ 0.845446] bus: 02 index 0 io port: [d000, dfff]
[ 0.845451] bus: 02 index 1 mmio: [fe600000, feafffff]
[ 0.845455] bus: 02 index 2 mmio: [f4300000, f43fffff]
[ 0.845459] bus: 02 index 3 io port: [0, ffff]
[ 0.845463] bus: 02 index 4 mmio: [0, ffffffff]
[ 0.845489] NET: Registered protocol family 2
[ 0.845811] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.846312] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.846426] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.846548] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.846556] TCP reno registered
[ 0.846817] NET: Registered protocol family 1
[ 0.847067] checking if image is initramfs...<7>Switched to high resolution mode on CPU 0
[ 1.516055] it is
[ 2.253773] Freeing initrd memory: 7995k freed
[ 2.255194] audit: initializing netlink socket (disabled)
[ 2.255224] type=2000 audit(1233976238.252:1): initialized
[ 2.263930] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 2.269889] VFS: Disk quotas dquot_6.5.1
[ 2.270112] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 2.270375] msgmni has been set to 749
[ 2.270706] io scheduler noop registered
[ 2.270714] io scheduler anticipatory registered
[ 2.270720] io scheduler deadline registered
[ 2.270761] io scheduler cfq registered (default)
[ 2.270848] pci 0000:01:00.0: Boot video device
[ 2.270875] pci 0000:02:0b.0: Firmware left e100 interrupts enabled; disabling
[ 2.271702] isapnp: Scanning for PnP cards...
[ 2.628717] isapnp: No Plug & Play device found
[ 2.793568] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[ 2.793787] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 2.796376] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 2.801040] brd: module loaded
[ 2.801229] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 2.801536] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 2.804548] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.804560] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.805843] mice: PS/2 mouse device common for all mice
[ 2.806322] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 2.806358] rtc0: alarms up to one month
[ 2.806690] EISA: Probing bus 0 at eisa.0
[ 2.806740] EISA: Detected 0 cards.
[ 2.806746] cpuidle: using governor ladder
[ 2.806752] cpuidle: using governor menu
[ 2.807893] TCP cubic registered
[ 2.807960] Using IPI No-Shortcut mode
[ 2.808869] registered taskstats version 1
[ 2.809088] Magic number: 13:430:158
[ 2.809324] rtc_cmos 00:02: setting system clock to 2009-02-07 03:10:40 UTC (1233976240)
[ 2.809331] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 2.809335] EDD information not available.
[ 2.809983] Freeing unused kernel memory: 424k freed
[ 2.810088] Write protecting the kernel text: 2580k
[ 2.810149] Write protecting the kernel read-only data: 940k
[ 2.836364] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 3.268117] fuse init (API version 7.9)
[ 3.394040] processor ACPI0007:00: registered as cooling_device0
[ 4.648230] e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI
[ 4.648238] e100: Copyright(c) 1999-2006 Intel Corporation
[ 4.648311] e100 0000:02:0b.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 4.739990] e100 0000:02:0b.0: PME# disabled
[ 4.876543] usbcore: registered new interface driver usbfs
[ 4.876595] usbcore: registered new interface driver hub
[ 4.893031] No dock devices found.
[ 4.937459] usbcore: registered new device driver usb
[ 4.946981] SCSI subsystem initialized
[ 4.947155] USB Universal Host Controller Interface driver v3.0
[ 5.012885] libata version 3.00 loaded.
[ 5.019607] e100: eth0: e100_probe: addr 0xfeaff000, irq 23, MAC addr 00:02:b3:3e:42:82
[ 5.019724] uhci_hcd 0000:00:1f.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 5.019741] uhci_hcd 0000:00:1f.2: setting latency timer to 64
[ 5.019748] uhci_hcd 0000:00:1f.2: UHCI Host Controller
[ 5.019863] uhci_hcd 0000:00:1f.2: new USB bus registered, assigned bus number 1
[ 5.019912] uhci_hcd 0000:00:1f.2: irq 19, io base 0x0000ef40
[ 5.020298] usb usb1: configuration #1 chosen from 1 choice
[ 5.020366] hub 1-0:1.0: USB hub found
[ 5.020392] hub 1-0:1.0: 2 ports detected
[ 5.124688] pata_acpi 0000:00:1f.1: setting latency timer to 64
[ 5.124755] uhci_hcd 0000:00:1f.4: PCI INT C -> GSI 23 (level, low) -> IRQ 23
[ 5.124769] uhci_hcd 0000:00:1f.4: setting latency timer to 64
[ 5.124776] uhci_hcd 0000:00:1f.4: UHCI Host Controller
[ 5.124850] uhci_hcd 0000:00:1f.4: new USB bus registered, assigned bus number 2
[ 5.124901] uhci_hcd 0000:00:1f.4: irq 23, io base 0x0000ef80
[ 5.125213] usb usb2: configuration #1 chosen from 1 choice
[ 5.125307] hub 2-0:1.0: USB hub found
[ 5.125327] hub 2-0:1.0: 2 ports detected
[ 5.238589] ata_piix 0000:00:1f.1: version 2.12
[ 5.238680] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 5.240223] scsi0 : ata_piix
[ 5.240464] scsi1 : ata_piix
[ 5.243455] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[ 5.243463] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[ 5.404694] ata1.00: ATA-6: Maxtor 98196H8, ZAH814Y0, max UDMA/100
[ 5.404704] ata1.00: 160086528 sectors, multi 16: LBA
[ 5.420621] ata1.00: configured for UDMA/100
[ 5.592428] ata2.00: ATAPI: SAMSUNG DVD-ROM SD-612, BS04, max MWDMA2
[ 5.592489] ata2.01: ATAPI: SAMSUNG CD-R/RW SW-408B, BS02, max MWDMA2
[ 5.608410] ata2.00: configured for MWDMA2
[ 5.624422] ata2.01: configured for MWDMA2
[ 5.624652] scsi 0:0:0:0: Direct-Access ATA Maxtor 98196H8 ZAH8 PQ: 0 ANSI: 5
[ 5.625419] scsi 1:0:0:0: CD-ROM SAMSUNG DVD-ROM SD-612 0.4 PQ: 0 ANSI: 5
[ 5.628873] scsi 1:0:1:0: CD-ROM SAMSUNG CD-R/RW SW-408B BS02 PQ: 0 ANSI: 5
[ 6.407833] scsi 0:0:0:0: Attached scsi generic sg0 type 0
[ 6.407942] scsi 1:0:0:0: Attached scsi generic sg1 type 5
[ 6.408492] scsi 1:0:1:0: Attached scsi generic sg2 type 5
[ 6.471844] Driver 'sd' needs updating - please use bus_type methods
[ 6.472158] sd 0:0:0:0: [sda] 160086528 512-byte hardware sectors (81964 MB)
[ 6.472200] sd 0:0:0:0: [sda] Write Protect is off
[ 6.472207] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 6.472272] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.472428] sd 0:0:0:0: [sda] 160086528 512-byte hardware sectors (81964 MB)
[ 6.472466] sd 0:0:0:0: [sda] Write Protect is off
[ 6.472473] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 6.472537] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.472547] sda:<4>Driver 'sr' needs updating - please use bus_type methods
[ 6.498142] sda1 sda2 < sda5 >
[ 6.531605] sd 0:0:0:0: [sda] Attached SCSI disk
[ 6.545220] sr0: scsi3-mmc drive: 4x/32x cd/rw xa/form2 cdda tray
[ 6.545231] Uniform CD-ROM driver Revision: 3.20
[ 6.545432] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 6.549782] sr1: scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda tray
[ 6.550002] sr 1:0:1:0: Attached scsi CD-ROM sr1
[ 6.990725] PM: Starting manual resume from disk
[ 6.990734] PM: Resume from partition 8:5
[ 6.990738] PM: Checking hibernation image.
[ 6.991231] PM: Resume from disk failed.
[ 7.138502] kjournald starting. Commit interval 5 seconds
[ 7.138538] EXT3-fs: mounted filesystem with ordered data mode.
[ 15.963665] udevd version 124 started
[ 17.485982] Linux agpgart interface v0.103
[ 17.560296] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 17.662980] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 17.796269] iTCO_vendor_support: vendor-support=0
[ 17.868279] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008)
[ 17.870479] iTCO_wdt: Found a ICH2 TCO device (Version=1, TCOBASE=0x0460)
[ 17.870758] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 17.960409] agpgart-intel 0000:00:00.0: Intel i850 Chipset
[ 17.984038] agpgart-intel 0000:00:00.0: AGP aperture is 64M @ 0xf8000000
[ 17.986949] input: PC Speaker as /devices/platform/pcspkr/input/input2
[ 18.088300] intel_rng: Firmware space is locked read-only. If you can't or
[ 18.088304] intel_rng: don't want to disable this in firmware setup, and if
[ 18.088307] intel_rng: you are certain that your system has a functional
[ 18.088310] intel_rng: RNG, try using the 'no_fwh_detect' option.
[ 18.284447] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 18.296071] ACPI: Power Button (FF) [PWRF]
[ 18.296317] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4
[ 18.312063] ACPI: Power Button (CM) [PBTN]
[ 19.479974] nvidia: module license 'NVIDIA' taints kernel.
[ 19.968711] gameport: EMU10K1 is pci0000:02:0a.1/gameport0, io 0xdff0, speed 877kHz
[ 20.960863] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input5
[ 20.979560] parport_pc 00:09: reported by Plug and Play ACPI
[ 20.979594] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
[ 21.361943] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 21.362449] NVRM: loading NVIDIA Linux x86 Kernel Module 96.43.09 Mon Oct 27 14:23:30 PST 2008
[ 22.691637] EMU10K1_Audigy 0000:02:0a.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 26.971826] lp0: using parport0 (interrupt-driven).
[ 27.226524] Adding 1116476k swap on /dev/sda5. Priority:-1 extents:1 across:1116476k
[ 27.847290] EXT3 FS on sda1, internal journal
[ 29.284905] type=1505 audit(1233976266.562:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=3795
[ 29.652060] type=1505 audit(1233976266.930:3): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=3800
[ 29.652610] type=1505 audit(1233976266.930:4): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=3800
[ 29.901680] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 30.873969] ACPI: WMI: Mapper loaded
[ 32.977668] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use)
[ 33.128689] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[ 33.128701] apm: overridden by ACPI.
[ 33.586852] ppdev: user-space parallel port driver
[ 37.114603] Bluetooth: Core ver 2.13
[ 37.118051] NET: Registered protocol family 31
[ 37.118063] Bluetooth: HCI device and connection manager initialized
[ 37.118074] Bluetooth: HCI socket layer initialized
[ 37.152411] Bluetooth: L2CAP ver 2.11
[ 37.152422] Bluetooth: L2CAP socket layer initialized
[ 37.191531] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 37.191542] Bluetooth: BNEP filters: protocol multicast
[ 37.230658] Bluetooth: RFCOMM socket layer initialized
[ 37.231165] Bluetooth: RFCOMM TTY layer initialized
[ 37.231179] Bluetooth: RFCOMM ver 1.10
[ 37.272974] Bridge firewalling registered
[ 37.304245] Bluetooth: SCO (Voice Link) ver 0.6
[ 37.304257] Bluetooth: SCO socket layer initialized
[ 41.516246] e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
[ 41.822981] NET: Registered protocol family 17
[ 48.144083] NET: Registered protocol family 10
[ 48.147774] lo: Disabled Privacy Extensions
[ 58.348013] eth0: no IPv6 routers present
[ 166.862452] ppdev0: registered pardevice
[ 166.912036] ppdev0: unregistered pardevice
[ 167.208292] ppdev0: registered pardevice
[ 167.256566] ppdev0: unregistered pardevice
[ 168.219450] ppdev0: registered pardevice
[ 168.268317] ppdev0: unregistered pardevice
Module Size Used by
ipv6 263972 10
af_packet 25728 2
binfmt_misc 16904 1
sco 18308 2
bridge 56980 0
stp 10628 1 bridge
rfcomm 44432 0
bnep 20480 2
l2cap 30464 6 rfcomm,bnep
bluetooth 61924 6 sco,rfcomm,bnep,l2cap
ppdev 15620 0
speedstep_lib 12676 0
cpufreq_ondemand 14988 0
cpufreq_stats 13188 0
freq_table 12672 2 cpufreq_ondemand,cpufreq_stats
cpufreq_userspace 11396 0
cpufreq_powersave 9856 0
cpufreq_conservative 14600 0
video 25232 0
output 11008 1 video
sbs 19464 0
sbshc 13440 1 sbs
container 11520 0
wmi 14504 0
pci_slot 12680 0
battery 18436 0
iptable_filter 10752 0
ip_tables 19600 1 iptable_filter
x_tables 22916 1 ip_tables
ac 12292 0
lp 17156 0
snd_emu10k1_synth 14464 0
snd_emux_synth 41344 1 snd_emu10k1_synth
snd_seq_virmidi 13568 1 snd_emux_synth
snd_seq_midi_emul 14592 1 snd_emux_synth
snd_emu10k1 146208 4 snd_emu10k1_synth
snd_ac97_codec 111652 1 snd_emu10k1
ac97_bus 9856 1 snd_ac97_codec
snd_pcm_oss 46848 0
snd_mixer_oss 22784 1 snd_pcm_oss
snd_pcm 83204 3 snd_emu10k1,snd_ac97_codec,snd_pcm_oss
snd_page_alloc 16136 2 snd_emu10k1,snd_pcm
snd_util_mem 12416 2 snd_emux_synth,snd_emu10k1
snd_hwdep 15236 2 snd_emux_synth,snd_emu10k1
snd_seq_dummy 10884 0
snd_seq_oss 38528 0
snd_seq_midi 14336 0
snd_rawmidi 29824 3 snd_seq_virmidi,snd_emu10k1,snd_seq_midi
evdev 17696 6
snd_seq_midi_event 15232 3 snd_seq_virmidi,snd_seq_oss,snd_seq_midi
snd_seq 57776 9 snd_emux_synth,snd_seq_virmidi,snd_seq_midi_emul,snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
parport_pc 39204 1
snd_timer 29960 3 snd_emu10k1,snd_pcm,snd_seq
snd_seq_device 15116 8 snd_emu10k1_synth,snd_emux_synth,snd_emu10k1,snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
parport 42604 3 ppdev,lp,parport_pc
snd 63268 19 snd_emux_synth,snd_seq_virmidi,snd_emu10k1,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_hwdep,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
psmouse 45200 0
soundcore 15328 1 snd
serio_raw 13444 0
emu10k1_gp 10880 0
nvidia 4717332 0
gameport 19468 2 emu10k1_gp
i2c_core 31892 1 nvidia
button 14224 0
pcspkr 10624 0
intel_agp 33724 1
iTCO_wdt 18596 0
iTCO_vendor_support 11652 1 iTCO_wdt
shpchp 38036 0
pci_hotplug 34976 1 shpchp
agpgart 42184 2 nvidia,intel_agp
ext3 133256 1
jbd 55828 1 ext3
mbcache 16004 1 ext3
sr_mod 22212 0
cdrom 43168 1 sr_mod
sd_mod 42392 3
crc_t10dif 9984 1 sd_mod
sg 39732 0
ata_generic 12932 0
ata_piix 24580 2
pata_acpi 12160 0
libata 178208 3 ata_generic,ata_piix,pata_acpi
uhci_hcd 30736 0
scsi_mod 155212 4 sr_mod,sd_mod,sg,libata
dock 16656 1 libata
usbcore 149360 2 uhci_hcd
e100 41356 0
mii 13440 1 e100
thermal 23708 0
processor 42156 1 thermal
fan 12548 0
fbcon 47648 0
tileblit 10880 1 fbcon
font 16512 1 fbcon
bitblit 13824 1 fbcon
softcursor 9984 1 bitblit
fuse 60828 3
Only plain text email is forwarded by the Discuss@xxxxxxxxxxxxx List Server,
as HTML can contain viruses. Use as the email Subject Line:
YourName, YourCountry kernel 2.6.27-11-generic
With this Subject Line cogent experts will be alerted, and useful case names left in the Archive.
YourCountry will enable Country specific guidance. Linux experts in YourCountry
can be found through: http://www.linux.org/groups/index.html.
They will know your Country's modem code, which may be essential for dialup service.
Responses from Discuss@xxxxxxxxxxxxx are sometimes blocked by an Internet Provider mail filters.
So in a day, also check the Archived responses at http://www.linmodems.org
-------------------------- System information ----------------------------
CPU=i686,
Linux version 2.6.27-11-generic (buildd@rothera) (gcc version 4.3.2 (Ubuntu 4.3.2-1ubuntu11) ) #1 SMP Thu Jan 29 19:24:39 UTC 2009
scanModem update of: 2008_11_06
There are no blacklisted modem drivers in /etc/modprobe* files
Attached USB devices are:
ID 1d6b:0001 Linux Foundation 1.1 root hub
ID 1d6b:0001 Linux Foundation 1.1 root hub
USB modems not recognized
For candidate card in slot 02:0c.0, firmware information and bootup diagnostics are:
PCI slot PCI ID SubsystemID Name
---------- --------- --------- --------------
02:0c.0 14f1:1033 122d:4034 Communication controller: Conexant Systems, Inc. HCF 56k Data/Fax Modem
Modem interrupt assignment and sharing:
--- Bootup diagnostics for card in PCI slot 02:0c.0 ----
[ 0.791600] PCI: 0000:02:0c.0 reg 10 32bit mmio: [feae0000, feaeffff]
[ 0.791610] PCI: 0000:02:0c.0 reg 14 io port: [dfe0, dfe7]
[ 0.791660] pci 0000:02:0c.0: PME# supported from D0 D3hot D3cold
[ 0.791667] pci 0000:02:0c.0: PME# disabled
The PCI slot 02:0c.0 of the modem card may be disabled early in
a bootup process, but then enabled later. If modem drivers load
but the modem is not responsive, read DOCs/Bootup.txt about possible fixes.
Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx
if help is needed.
=== Finished firmware and bootup diagnostics, next deducing cogent software. ===
Predictive diagnostics for card in bus 02:0c.0:
Modem chipset detected on
NAME="Communication controller: Conexant Systems, Inc. HCF 56k Data/Fax Modem "
CLASS=0780
PCIDEV=14f1:1033
SUBSYS=122d:4034
IRQ=10
IDENT=hcfpcimodem
For candidate modem in: 02:0c.0
0780 Communication controller: Conexant Systems, Inc. HCF 56k Data/Fax Modem
Primary device ID: 14f1:1033
Support type needed or chipset: hcfpcimodem
----------------end Softmodem section --------------
For owners of a Dell PCs with Conexant HSF modems, a driver source package with full speed enabled is available, but requires driver compiling. Read DOCs/Conexant.txt
The modem requires a hcflinmodem package.
From http://www.linuxant.com/drivers/hcf/full/downloads-ubuntu-x86.php
download hcfpcimodem-7.68.00.12full_k2.6.27_11_generic_ubuntu_i386.deb.zip
Under Linux unpack with:
$ unzip hcfpcimodem*.zip
Then install with:
$ sudo dpkg -i hcfpcimodem*.deb
Subsequently, the modem should be found with
$ sudo wvdialconf /etc/wvdial.conf
Edit in your personal information with:
$ sudo gedit /etc/wvdial.conf
and try dialing out with:
$ sudo wvdial.
See DOCs/Testing.txt for details.
Read DOCs/Conexant.txt
Writing DOCs/Conexant.txt
Completed candidate modem analyses.
The base of the UDEV device file system is: /dev/.udev
Versions adequately match for the compiler installed: 4.3.2
and the compiler used in kernel assembly: 4.3.2
Minimal compiling resources appear complete:
make utility - /usr/bin/make
Compiler version 4.3
linuc_headers base folder /lib/modules/2.6.27-11-generic/build
However some compilations and executable functions may need additional files,
in the FileNames.h (so called kernel "h"eaders) collection installed in /usr/include/ .
For martian_modem, additional required packages are needed. The also required headers of package libc6 are commonly installed by default.
Compiling hsfmodem drivers does require linux-libc-dev and libc6-dev packages, for kernels 2.6.24 and later versions.
In not included on your install CD, search for them at http://packages.ubuntu.com
or comparable Repository for other Linux distros.
When compiling ALSA drivers, the utility "patch" will also be needed.
If a driver compilation fails, with message including some lack of some FileName.h (stdio.h for example), then
Some additional kernel-header files need installation to /usr/include. The minimal additional packages are libc6-dev
and any of its dependents, under Ubuntu linux-libc-dev
If an alternate ethernet connection is available,
$ apt-get update
$ apt-get -s install linux-kernel-devel
will install needed packages.
For Debian/Ubuntu related distributions, run the following command to display the needed package list:
Otherwise packages have to be found through http://packages.ubuntu.com
Once downloaded and transferred into a Linux partition,
they can be installed alltogether with:
$ sudo dpkg -i *.deb
Checking pppd properties:
-rwsr-xr-- 1 root dip 277160 2008-11-20 15:58 /usr/sbin/pppd
In case of an "error 17" "serial loopback" problem, see:
http://linmodems.technion.ac.il/linmodems/archive-sixth/msg02637.html
To enable dialout without Root permission do:
$ su - root (not for Ubuntu)
sudo chmod a+x /usr/sbin/pppd
or under Ubuntu related Linuxes
sudo chmod a+x /usr/sbin/pppd
Checking settings of: /etc/ppp/options
asyncmap 0
noauth
crtscts
lock
hide-password
modem
proxyarp
lcp-echo-interval 30
lcp-echo-failure 4
noipx
In case of a message like:
Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html
Read Modem/DOCs/YourSystem.txt concerning other COMM channels: eth0
Which can interfere with Browser naviagation.
Don't worry about the following, it is for experts should trouble shooting be necessary.
==========================================================
Checking for modem support lines:
--------------------------------------
/device/modem symbolic link:
slmodemd created symbolic link /dev/ttySL0:
Within /etc/udev/ files:
Within /etc/modprobe.conf files:
/etc/modprobe.d/alsa-base:options snd-atiixp-modem index=-2
/etc/modprobe.d/alsa-base:options snd-via82xx-modem index=-2
/etc/modprobe.d/blacklist-modem:# Uncomment these entries in order to blacklist unwanted modem drivers
/etc/modprobe.d/blacklist-modem:# blacklist snd-atiixp-modem
/etc/modprobe.d/blacklist-modem:# blacklist snd-via82xx-modem
Within any ancient /etc/devfs files:
Within ancient kernel 2.4.n /etc/module.conf files:
--------- end modem support lines --------
