Hello all...,
At first I'd like to clarify that I'm new using Linux, so just be friendly..., Ok.
I really need your help to discover a mystery, I mean..., Why I cannot configure and connect my modem according to those release/details/files
below.
My simple questions are...
How can I input the Phone # data in the Ubuntu 8.10 Desktop Edition ?
How can I connect my Modem to my phone line ? See its features:
*** Windows XP diagnostic ***
Toshiba Software Modem
Device type: Modems
Manufacturer: Agere
Location: Location 65535 ( Internal High Definition Audio )
Matching hardware ID: hdaudio\func_02&ven_11c1&dev_3026&subsys_11790001&Rev_1007\4&1e09af89&0&0101
ATQ0V1E0 - OK
AT+GMM - H.324 video-ready rev. 1.0
AT+FCLASS=? - 0,1
AT#CLS=? - COMMAND NOT SUPPORTED
AT+GCI? - +GCI:B5
AT+GCI=? - +GCI:(00,02,04,07,09,0A,0B,0C,0D,0E,0F,10,14,16,19,1A,1B,20,22,25,26,27,2B,2D,2E,31,33,35,36,37,3C,3D,45,46,49,4E,4F,50,51,52,53,54,
57,58,59,5B,5E,5F,61,62,64,68,69,6C,70,73,74,77,7B,7E,7F,82,83,84,85,87,88,89,8A,8B,8C,8D,8E,93,98,99,9C,9F,A0,A1,A5,A6,A9,AC,AD,AE,B2,B3,B4,B5,
B7,B8,BB,BC,C1)
ATI1 - OK
ATI2 - OK
ATI3 - TOSHIBA Software Modem Version 2.1.62
ATI4 - Built on 11/14/2005 16:00:19
ATI5 - 2.1.62, HDA MB, HDA, S-Rev:G L-Rev:C, 19
ATI6 - OK
ATI7 - HDA MB
*** ModemData.txt ***
-------------------------- System information ----------------------------
CPU=i686,
Linux version 2.6.27-7-generic (buildd@rothera) (gcc version 4.3.2 (Ubuntu 4.3.2-1ubuntu10) ) #1 SMP Fri Oct 24 06:42:44 UTC 2008
scanModem update of: 2008_11_06
There are no blacklisted modem drivers in /etc/modprobe* files Attached USB devices are:
ID 1d6b:0002 Linux Foundation 2.0 root hub
ID 1d6b:0001 Linux Foundation 1.1 root hub
ID 1267:0210 Logic3 / SpectraVideo plc
ID 1d6b:0001 Linux Foundation 1.1 root hub
ID 1d6b:0001 Linux Foundation 1.1 root hub
ID 0483:2016 SGS Thomson Microelectronics Fingerprint Reader
ID 1d6b:0001 Linux Foundation 1.1 root hub
USB modems not recognized
For candidate card in slot 00:1b.0, firmware information and bootup diagnostics are:
PCI slot PCI ID SubsystemID Name
---------- --------- --------- --------------
00:1b.0 8086:27d8 1179:ff10 Audio device: Intel Corporation 82801G
Modem interrupt assignment and sharing:
22: 1802 0 IO-APIC-fasteoi HDA Intel
--- Bootup diagnostics for card in PCI slot 00:1b.0 ----
[ 0.676335] PCI: 0000:00:1b.0 reg 10 64bit mmio: [dc240000, dc243fff]
[ 0.676335] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.676335] pci 0000:00:1b.0: PME# disabled
[ 73.150784] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 73.150817] HDA Intel 0000:00:1b.0: setting latency timer to 64
The PCI slot 00:1b.0 of the modem card may be disabled early in a bootup process, but then enabled later. If modem drivers load but the modem
is not responsive, read DOCs/Bootup.txt about possible fixes. Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx if help is
needed.
===== Advanced Linux Sound Architecture (ALSA) diagnostics =====
The ALSA packages provide audio support and also drivers for some modems. ALSA diagnostics are written during bootup to /proc/asound/ folders.
The ALSA version is 1.0.17. The modem cards detected by "aplay -l" are:
placa 0: Intel [HDA Intel], dispositivo 6: Si3054 Modem [Si3054 Modem]
The /proc/asound/pcm file reports:
-----------------------
00-06: Si3054 Modem: Si3054 Modem: playback 1: capture 1 00-00: ALC861 Analog: ALC861 Analog: playback 1: capture 1 about /proc/asound/cards:
------------------------
0 [Intel ]: HDA-Intel - HDA Intel
HDA Intel at 0xdc240000 irq 22
PCI slot 00:1b.0 has a High Definition Audio Card. The drivers are in the kernel modules tree at:
/lib/modules/2.6.27-7-generic/kernel/sound/pci/hda/snd-hda-intel.ko
The modem codec file for the HDA card is:
/proc/asound/card0/codec#1
--------------------------------------------------------
Codec: LSI Si3054
Address: 1
Vendor Id: 0x11c13026
Subsystem Id: 0x11790001
Revision Id: 0x100700
Modem Function Group: 0x1
The audio card hosts a softmodem chip: 0x11c13026
The softmodem chip 0x11c13026 is in principle supported by the COMM support of slmodemd and the joint snd-hda-intel audio+modem driver, begun
with ALSA version 1.0.13.
For HDA cards with ALC883 chips, an upgrade to ALSA versions 1.0.15 way be necessary. Instructions for Upgrading snd-hda-intel and its dependent
driver set are at:
http://linmodems.technion.ac.il/bigarch/archive-eighth/msg00838.html
If not a Conexant modem, the driver snd-hda-intel with its dependent drivers:
snd_hda_intel 381488 3
snd_pcm 83204 2 snd_hda_intel,snd_pcm_oss
snd 63268 15 snd_hda_intel,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
snd_page_alloc 16136 2 snd_hda_intel,snd_pcm
----------
provide audio + modem support with the modem chip residing on the subsystem. Any particular card can host any one of several soft modem chips.
=== Finished firmware and bootup diagnostics, next deducing cogent software. ===
Predictive diagnostics for card in bus 00:1b.0:
Modem chipset detected on
NAME="Audio device: Intel Corporation 82801G "
CLASS=0403
PCIDEV=8086:27d8
SUBSYS=1179:ff10
IRQ=22
HDA=8086:27d8
SOFT=8086:27d8.HDA
CHIP=0x11c13026
IDENT=slmodemd
SLMODEMD_DEVICE=hw:0,6
Driver=snd-hda-intel
For candidate modem in: 00:1b.0
0403 Audio device: Intel Corporation 82801G
Primary device ID: 8086:27d8
Subsystem PCI_id 1179:ff10
Softmodem codec or chipset from diagnostics: 0x11c13026
from Archives: The HDA card softmodem chip is 0x11c13026
Support type needed or chipset: slmodemd supporting the snd-hda-intel audio+modem driver
An ALSA ( Advanced Linux Sound Architecture ) modem driver: snd-hda-intel
provides Low Level support enabling contact with the modem hardware. For all BUT Conexant chip soft modems ( using hsfmodem software )
complementary High Level support is through a Smartlink utility: slmodemd
Download from http://linmodems.technion.ac.il/packages/smartlink/
the package SLMODEMD.gcc4.3.tar.gz having a compiled slmodemd. Unpack under Linux with:
$ tar zxf SLMODEMD.gcc4.3.tar.gz
and read instructions therein. But briefly, the modem is setup with command:
sudo slmodemd -c YOUR_COUNTRY --alsa hw:0,6
reporting dynamic creation of ports:
/dev/ttySL0 --> /dev/pts/N , with N some number
Read DOCs/Smartlink.txt and Modem/DOCs/YourSystem.txt for follow through guidance.
----------------end Softmodem section --------------
Writing DOCs/Intel.txt
Writing DOCs/Smartlink.txt
============ end Smartlink section =====================
Completed candidate modem analyses.
The base of the UDEV device file system is: /dev/.udev
Versions adequately match for the compiler installed: 4.3.2
and the compiler used in kernel assembly: 4.3.2
Minimal compiling resources appear complete:
make utility - /usr/bin/make
Compiler version 4.3
linuc_headers base folder /lib/modules/2.6.27-7-generic/build
However some compilations and executable functions may need additional files, in the FileNames.h (so called kernel "h"eaders) collection
installed in
/usr/include/ .
For martian_modem, additional required packages are needed. The also required headers of package libc6 are commonly installed by default.
Compiling hsfmodem drivers does require linux-libc-dev and libc6-dev packages, for kernels 2.6.24 and later versions. In not included on your
install CD, search for them at
http://packages.ubuntu.com
or comparable Repository for other Linux distros. When compiling ALSA drivers, the utility "patch" will also be needed.
If a driver compilation fails, with message including some lack of some FileName.h (stdio.h for example), then some additional kernel-header files
need installation to /usr/include . The minimal additional packages are libc6-dev and any of its dependents, under Ubuntu linux-libc-dev
If an alternate ethernet connection is available,
$ apt-get update
$ apt-get -s install linux-kernel-devel
will install needed packages. For Debian/Ubuntu related distributions, run the following command to display the needed package list:
Otherwise packages have to be found through http://packages.ubuntu.com
Once downloaded and transferred into a Linux partition, they can be
installed alltogether with:
$ sudo dpkg -i *.deb
Checking pppd properties:
-rwsr-xr-- 1 root dip 273064 2008-10-16 01:51 /usr/sbin/pppd
In case of an "error 17" "serial loopback" problem, see:
http://linmodems.technion.ac.il/linmodems/archive-sixth/msg02637.html
To enable dialout without Root permission do:
$ su - root (not for Ubuntu)
sudo chmod a+x /usr/sbin/pppd
or under Ubuntu related Linuxes
sudo chmod a+x /usr/sbin/pppd
Checking settings of: /etc/ppp/options
asyncmap 0
noauth
crtscts
lock
hide-password
modem
proxyarp
lcp-echo-interval 30
lcp-echo-failure 4
noipx
In case of a message like:
Warning: Could not modify /etc/ppp/pap-secrets: Permission denied see
http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html
Read Modem/DOCs/YourSystem.txt concerning other COMM channels: eth0
Which can interfere with Browser naviagation.
Don't worry about the following, it is for experts should trouble shooting be necessary.
==========================================================
Checking for modem support lines:
--------------------------------------
/device/modem symbolic link:
slmodemd created symbolic link /dev/ttySL0:
Within /etc/udev/ files:
Within /etc/modprobe.conf files:
/etc/modprobe.d/alsa-base:options snd-atiixp-modem index=-2
/etc/modprobe.d/alsa-base:options snd-via82xx-modem index=-2
/etc/modprobe.d/blacklist-modem:# Uncomment these entries in order to blacklist unwanted modem drivers
/etc/modprobe.d/blacklist-modem:# blacklist snd-atiixp-modem
/etc/modprobe.d/blacklist-modem:# blacklist snd-via82xx-modem
Within any ancient /etc/devfs files:
Within ancient kernel 2.4.n /etc/module.conf files:
--------- end modem support lines --------
*** dmesg.txt ***
CPU0 CPU1
0: 50702 0 IO-APIC-edge timer
1: 586 0 IO-APIC-edge i8042
8: 88 0 IO-APIC-edge rtc0
9: 900 0 IO-APIC-fasteoi acpi
12: 132 0 IO-APIC-edge i8042
14: 1797 0 IO-APIC-edge ata_piix
15: 8507 0 IO-APIC-edge ata_piix
16: 55045 0 IO-APIC-fasteoi uhci_hcd:usb4, i915@pci:0000:00:02.0
17: 119 0 IO-APIC-fasteoi ohci1394
18: 18394 0 IO-APIC-fasteoi uhci_hcd:usb3, yenta, tifm_7xx1, mmc0
19: 0 0 IO-APIC-fasteoi uhci_hcd:usb2
22: 1802 0 IO-APIC-fasteoi HDA Intel
23: 57 0 IO-APIC-fasteoi uhci_hcd:usb1, ehci_hcd:usb5
220: 467 0 PCI-MSI-edge eth0
NMI: 0 0 Non-maskable interrupts
LOC: 16310 36947 Local timer interrupts
RES: 41665 47804 Rescheduling interrupts
CAL: 31661 58154 function call interrupts
TLB: 898 1037 TLB shootdowns
SPU: 0 0 Spurious interrupts
ERR: 0
MIS: 0
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.27-7-generic (buildd@rothera) (gcc version 4.3.2 (Ubuntu 4.3.2-1ubuntu10) ) #1 SMP Fri Oct 24 06:42:44
UTC 2008 (Ubuntu 2.6.27-7.14-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007f670000 (usable)
[ 0.000000] BIOS-e820: 000000007f670000 - 000000007f700000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007f700000 - 0000000080000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
[ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] last_pfn = 0x7f670 max_arch_pfn = 0x100000
[ 0.000000] kernel direct mapping tables up to 38000000 @ 7000-c000
[ 0.000000] RAMDISK: 7ee31000 - 7f63f8ae
[ 0.000000] Allocated new RAMDISK: 005c4000 - 00dd28ae
[ 0.000000] Move RAMDISK from 000000007ee31000 - 000000007f63f8ad to 005c4000 - 00dd28ad
[ 0.000000] DMI present.
[ 0.000000] ACPI: RSDP 000F6510, 0014 (r0 TOSINV)
[ 0.000000] ACPI: RSDT 7F67E23A, 0048 (r1 TOSINV Capell00 6040000 LTP 0)
[ 0.000000] ACPI: FACP 7F685DEE, 0074 (r1 TOSINV CALISTGA 6040000 LOHR 5A)
[ 0.000000] ACPI: DSDT 7F67F8EF, 64FF (r1 TOSINV CALISTGA 6040000 INTL 20050624)
[ 0.000000] ACPI: FACS 7F686FC0, 0040
[ 0.000000] ACPI: APIC 7F685E62, 0068 (r1 INTEL CALISTGA 6040000 LOHR 5A)
[ 0.000000] ACPI: HPET 7F685ECA, 0038 (r1 INTEL CALISTGA 6040000 LOHR 5A)
[ 0.000000] ACPI: MCFG 7F685F02, 003C (r1 INTEL CALISTGA 6040000 LOHR 5A)
[ 0.000000] ACPI: BOOT 7F685FD8, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1)
[ 0.000000] ACPI: APIC 7F685F70, 0068 (r1 TOSINV APIC 6040000 LTP 0)
[ 0.000000] ACPI: SSDT 7F67F29C, 064F (r1 SataRe SataPri 1000 INTL 20050624)
[ 0.000000] ACPI: SSDT 7F67EC0A, 0692 (r1 SataRe SataSec 1000 INTL 20050624)
[ 0.000000] ACPI: SSDT 7F67E282, 04F6 (r1 PmRef CpuPm 3000 INTL 20050624)
[ 0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0
[ 0.000000] ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@xxxxxxxxxxxxxxx
[ 0.000000] ACPI: DMI detected: Toshiba
[ 0.000000] 1142MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 38000000
[ 0.000000] low ram: 00000000 - 38000000
[ 0.000000] bootmap 00008000 - 0000f000
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 0038000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0000100000 - 00005c0a20] TEXT DATA BSS ==> [0000100000 - 00005c0a20]
[ 0.000000] #4 [00005c1000 - 00005c4000] INIT_PG_TABLE ==> [00005c1000 - 00005c4000]
[ 0.000000] #5 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000]
[ 0.000000] #6 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000]
[ 0.000000] #7 [00005c4000 - 0000dd28ae] NEW RAMDISK ==> [00005c4000 - 0000dd28ae]
[ 0.000000] #8 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000]
[ 0.000000] found SMP MP-table at [c00f65c0] 000f65c0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x00038000
[ 0.000000] HighMem 0x00038000 -> 0x0007f670
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0007f670
[ 0.000000] On node 0 totalpages: 521743
[ 0.000000] free_area_init_node: node 0, pgdat c048a500, node_mem_map c1000000
[ 0.000000] DMA zone: 3963 pages, LIFO batch:0
[ 0.000000] Normal zone: 223300 pages, LIFO batch:31
[ 0.000000] HighMem zone: 289893 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] mapped APIC to ffffb000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000
[ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
[ 0.000000] PERCPU: Allocating 41628 bytes of per cpu data
[ 0.000000] NR_CPUS: 64, nr_cpu_ids: 2, nr_node_ids 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 517156
[ 0.000000] Kernel command line: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.gz quiet
splash -- locale=pt_BR console-setup/layoutcode?=br console-setup/modelcode?=abnt2
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] TSC: PIT calibration confirmed by PMTIMER.
[ 0.000000] TSC: using PIT calibration value
[ 0.000000] Detected 1828.723 MHz processor.
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.004000] Memory: 2053688k/2087360k available (2572k kernel code, 32440k reserved, 1160k data, 424k init, 1169856k highmem)
[ 0.004000] virtual kernel memory layout:
[ 0.004000] fixmap : 0xffc77000 - 0xfffff000 (3616 kB)
[ 0.004000] pkmap : 0xff400000 - 0xff800000 (4096 kB)
[ 0.004000] vmalloc : 0xf8800000 - 0xff3fe000 ( 107 MB)
[ 0.004000] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 0.004000] .init : 0xc04ab000 - 0xc0515000 ( 424 kB)
[ 0.004000] .data : 0xc038329a - 0xc04a5680 (1160 kB)
[ 0.004000] .text : 0xc0100000 - 0xc038329a (2572 kB)
[ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated
[ 0.004000] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.004000] hpet clockevent registered
[ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 3657.44 BogoMIPS (lpj=7314892)
[ 0.004000] Security Framework initialized
[ 0.004000] SELinux: Disabled at boot.
[ 0.004000] AppArmor: AppArmor initialized
[ 0.004000] Mount-cache hash table entries: 512
[ 0.004000] Initializing cgroup subsys ns
[ 0.004000] Initializing cgroup subsys cpuacct
[ 0.004000] Initializing cgroup subsys memory
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004000] CPU: L2 cache: 2048K
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 0
[ 0.004000] using mwait in idle threads.
[ 0.004000] Checking 'hlt' instruction... OK.
[ 0.018441] ACPI: Core revision 20080609
[ 0.020970] ACPI: Checking initramfs for custom DSDT
[ 0.412277] ENABLING IO-APIC IRQs
[ 0.412474] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.453077] CPU0: Intel Genuine Intel(R) CPU T2400 @ 1.83GHz stepping 08
[ 0.456028] Booting processor 1/1 ip 6000
[ 0.004000] Initializing CPU#1
[ 0.004000] Calibrating delay using timer specific routine.. 3657.60 BogoMIPS (lpj=7315201)
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004000] CPU: L2 cache: 2048K
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 1
[ 0.540555] CPU1: Intel Genuine Intel(R) CPU T2400 @ 1.83GHz stepping 08
[ 0.540577] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.544055] Brought up 2 CPUs
[ 0.544059] Total of 2 processors activated (7315.04 BogoMIPS).
[ 0.544085] CPU0 attaching sched-domain:
[ 0.544088] domain 0: span 0-1 level MC
[ 0.544092] groups: 0 1
[ 0.544099] CPU1 attaching sched-domain:
[ 0.544102] domain 0: span 0-1 level MC
[ 0.544104] groups: 1 0
[ 0.544197] net_namespace: 840 bytes
[ 0.544197] Booting paravirtualized kernel on bare hardware
[ 0.544331] Time: 21:11:21 Date: 01/03/09
[ 0.544363] NET: Registered protocol family 16
[ 0.544387] EISA bus registered
[ 0.544387] ACPI: bus type pci registered
[ 0.544387] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.544387] PCI: MCFG area at e0000000 reserved in E820
[ 0.544387] PCI: Using MMCONFIG for extended config space
[ 0.544387] PCI: Using configuration type 1 for base access
[ 0.548303] ACPI: EC: Look up EC in DSDT
[ 0.576070] ACPI: BIOS _OSI(Linux) query ignored via DMI
[ 0.576969] ACPI: Interpreter enabled
[ 0.576973] ACPI: (supports S0 S3 S4 S5)
[ 0.576991] ACPI: Using IOAPIC for interrupt routing
[ 0.676335] ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62
[ 0.676335] ACPI: EC: driver started in poll mode
[ 0.676335] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.676335] PCI: 0000:00:02.0 reg 10 32bit mmio: [dc100000, dc17ffff]
[ 0.676335] PCI: 0000:00:02.0 reg 14 io port: [1800, 1807]
[ 0.676335] PCI: 0000:00:02.0 reg 18 32bit mmio: [c0000000, cfffffff]
[ 0.676335] PCI: 0000:00:02.0 reg 1c 32bit mmio: [dc200000, dc23ffff]
[ 0.676335] PCI: 0000:00:02.1 reg 10 32bit mmio: [dc180000, dc1fffff]
[ 0.676335] PCI: 0000:00:1b.0 reg 10 64bit mmio: [dc240000, dc243fff]
[ 0.676335] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.676335] pci 0000:00:1b.0: PME# disabled
[ 0.676392] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.676397] pci 0000:00:1c.0: PME# disabled
[ 0.676468] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.676473] pci 0000:00:1c.1: PME# disabled
[ 0.676543] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.676548] pci 0000:00:1c.2: PME# disabled
[ 0.676600] PCI: 0000:00:1d.0 reg 20 io port: [1820, 183f]
[ 0.676662] PCI: 0000:00:1d.1 reg 20 io port: [1840, 185f]
[ 0.676724] PCI: 0000:00:1d.2 reg 20 io port: [1860, 187f]
[ 0.676786] PCI: 0000:00:1d.3 reg 20 io port: [1880, 189f]
[ 0.676855] PCI: 0000:00:1d.7 reg 10 32bit mmio: [dc444000, dc4443ff]
[ 0.676912] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.676918] pci 0000:00:1d.7: PME# disabled
[ 0.677075] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
[ 0.677081] pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO
[ 0.677125] PCI: 0000:00:1f.2 reg 10 io port: [0, 7]
[ 0.677133] PCI: 0000:00:1f.2 reg 14 io port: [0, 3]
[ 0.677141] PCI: 0000:00:1f.2 reg 18 io port: [0, 7]
[ 0.677149] PCI: 0000:00:1f.2 reg 1c io port: [0, 3]
[ 0.677158] PCI: 0000:00:1f.2 reg 20 io port: [18b0, 18bf]
[ 0.677189] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.677194] pci 0000:00:1f.2: PME# disabled
[ 0.677251] PCI: 0000:00:1f.3 reg 20 io port: [18c0, 18df]
[ 0.677362] PCI: 0000:02:00.0 reg 10 32bit mmio: [d6000000, d601ffff]
[ 0.677388] PCI: 0000:02:00.0 reg 18 io port: [2000, 201f]
[ 0.677477] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.677485] pci 0000:02:00.0: PME# disabled
[ 0.677536] PCI: bridge 0000:00:1c.0 io port: [2000, 2fff]
[ 0.677542] PCI: bridge 0000:00:1c.0 32bit mmio: [d6000000, d7ffffff]
[ 0.677551] PCI: bridge 0000:00:1c.0 64bit mmio pref: [d0000000, d1ffffff]
[ 0.677611] PCI: bridge 0000:00:1c.1 io port: [3000, 3fff]
[ 0.677617] PCI: bridge 0000:00:1c.1 32bit mmio: [d8000000, d9ffffff]
[ 0.677625] PCI: bridge 0000:00:1c.1 64bit mmio pref: [d2000000, d3ffffff]
[ 0.677811] PCI: 0000:05:00.0 reg 10 32bit mmio: [da000000, da000fff]
[ 0.678019] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
[ 0.678032] pci 0000:05:00.0: PME# disabled
[ 0.678083] PCI: bridge 0000:00:1c.2 io port: [4000, 4fff]
[ 0.678089] PCI: bridge 0000:00:1c.2 32bit mmio: [da000000, dbffffff]
[ 0.678098] PCI: bridge 0000:00:1c.2 64bit mmio pref: [d4000000, d5ffffff]
[ 0.678159] PCI: 0000:07:06.0 reg 10 32bit mmio: [0, fff]
[ 0.678180] pci 0000:07:06.0: supports D1
[ 0.678182] pci 0000:07:06.0: supports D2
[ 0.678185] pci 0000:07:06.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.678191] pci 0000:07:06.0: PME# disabled
[ 0.678234] PCI: 0000:07:06.1 reg 10 32bit mmio: [dc005000, dc0057ff]
[ 0.678244] PCI: 0000:07:06.1 reg 14 32bit mmio: [dc000000, dc003fff]
[ 0.678302] pci 0000:07:06.1: supports D1
[ 0.678304] pci 0000:07:06.1: supports D2
[ 0.678307] pci 0000:07:06.1: PME# supported from D0 D1 D2 D3hot
[ 0.678313] pci 0000:07:06.1: PME# disabled
[ 0.678354] PCI: 0000:07:06.2 reg 10 32bit mmio: [dc004000, dc004fff]
[ 0.678416] pci 0000:07:06.2: supports D1
[ 0.678418] pci 0000:07:06.2: supports D2
[ 0.678420] pci 0000:07:06.2: PME# supported from D0 D1 D2 D3hot
[ 0.678427] pci 0000:07:06.2: PME# disabled
[ 0.678466] PCI: 0000:07:06.3 reg 10 32bit mmio: [dc005800, dc0058ff]
[ 0.678528] pci 0000:07:06.3: supports D1
[ 0.678530] pci 0000:07:06.3: supports D2
[ 0.678533] pci 0000:07:06.3: PME# supported from D0 D1 D2 D3hot
[ 0.678539] pci 0000:07:06.3: PME# disabled
[ 0.678594] pci 0000:00:1e.0: transparent bridge
[ 0.678602] PCI: bridge 0000:00:1e.0 32bit mmio: [dc000000, dc0fffff]
[ 0.678657] bus 00 -> node 0
[ 0.678665] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.679130] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.680217] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 0.680397] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[ 0.680592] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[ 0.776273] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 0.776317] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 0.776463] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 0.776608] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.776753] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 0.776899] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 0.777045] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 0.777189] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 0.777277] ACPI: Power Resource [FN00] (off)
[ 0.777277] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 0.777277] pnp: PnP ACPI init
[ 0.777277] ACPI: bus type pnp registered
[ 0.848294] pnp: PnP ACPI: found 10 devices
[ 0.848297] ACPI: ACPI bus type pnp unregistered
[ 0.848301] PnPBIOS: Disabled by ACPI PNP
[ 0.848319] PCI: Using ACPI for IRQ routing
[ 0.856041] NET: Registered protocol family 8
[ 0.856044] NET: Registered protocol family 20
[ 0.856063] NetLabel: Initializing
[ 0.856063] NetLabel: domain hash size = 128
[ 0.856063] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.856075] NetLabel: unlabeled traffic allowed by default
[ 0.856084] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.856089] hpet0: 3 64-bit timers, 14318180 Hz
[ 0.857684] tracer: 772 pages allocated for 65536 entries of 48 bytes
[ 0.857687] actual entries 65620
[ 0.857781] AppArmor: AppArmor Filesystem Enabled
[ 0.857809] ACPI: RTC can wake from S4
[ 0.860045] Switched to high resolution mode on CPU 0
[ 0.860599] Switched to high resolution mode on CPU 1
[ 0.864027] system 00:01: iomem range 0xe0000000-0xefffffff could not be reserved
[ 0.864031] system 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved
[ 0.864034] system 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved
[ 0.864038] system 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved
[ 0.864042] system 00:01: iomem range 0xfed1c000-0xfed1ffff could not be reserved
[ 0.864045] system 00:01: iomem range 0xfed20000-0xfed3ffff could not be reserved
[ 0.864049] system 00:01: iomem range 0xfed45000-0xfed8ffff could not be reserved
[ 0.864058] system 00:04: iomem range 0xfed00000-0xfed003ff could not be reserved
[ 0.864069] system 00:06: ioport range 0x400-0x401 has been reserved
[ 0.864072] system 00:06: ioport range 0x680-0x69f has been reserved
[ 0.864076] system 00:06: ioport range 0x800-0x80f has been reserved
[ 0.864079] system 00:06: ioport range 0x1000-0x107f has been reserved
[ 0.864082] system 00:06: ioport range 0x1180-0x11bf has been reserved
[ 0.864086] system 00:06: ioport range 0x1640-0x164f has been reserved
[ 0.899366] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
[ 0.899371] pci 0000:00:1c.0: IO window: 0x2000-0x2fff
[ 0.899378] pci 0000:00:1c.0: MEM window: 0xd6000000-0xd7ffffff
[ 0.899384] pci 0000:00:1c.0: PREFETCH window: 0x000000d0000000-0x000000d1ffffff
[ 0.899393] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03
[ 0.899397] pci 0000:00:1c.1: IO window: 0x3000-0x3fff
[ 0.899404] pci 0000:00:1c.1: MEM window: 0xd8000000-0xd9ffffff
[ 0.899410] pci 0000:00:1c.1: PREFETCH window: 0x000000d2000000-0x000000d3ffffff
[ 0.899418] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:05
[ 0.899423] pci 0000:00:1c.2: IO window: 0x4000-0x4fff
[ 0.899430] pci 0000:00:1c.2: MEM window: 0xda000000-0xdbffffff
[ 0.899435] pci 0000:00:1c.2: PREFETCH window: 0x000000d4000000-0x000000d5ffffff
[ 0.899451] pci 0000:07:06.0: CardBus bridge, secondary bus 0000:08
[ 0.899454] pci 0000:07:06.0: IO window: 0x005000-0x0050ff
[ 0.899460] pci 0000:07:06.0: IO window: 0x005400-0x0054ff
[ 0.899466] pci 0000:07:06.0: PREFETCH window: 0x88000000-0x8bffffff
[ 0.899473] pci 0000:07:06.0: MEM window: 0x8c000000-0x8fffffff
[ 0.899480] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:07
[ 0.899485] pci 0000:00:1e.0: IO window: 0x5000-0x5fff
[ 0.899491] pci 0000:00:1e.0: MEM window: 0xdc000000-0xdc0fffff
[ 0.899497] pci 0000:00:1e.0: PREFETCH window: 0x00000088000000-0x0000008bffffff
[ 0.899518] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.899525] pci 0000:00:1c.0: setting latency timer to 64
[ 0.899535] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 0.899541] pci 0000:00:1c.1: setting latency timer to 64
[ 0.899551] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.899557] pci 0000:00:1c.2: setting latency timer to 64
[ 0.899566] pci 0000:00:1e.0: setting latency timer to 64
[ 0.899576] pci 0000:07:06.0: enabling device (0000 -> 0003)
[ 0.899581] pci 0000:07:06.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.899590] bus: 00 index 0 io port: [0, ffff]
[ 0.899592] bus: 00 index 1 mmio: [0, ffffffff]
[ 0.899595] bus: 02 index 0 io port: [2000, 2fff]
[ 0.899598] bus: 02 index 1 mmio: [d6000000, d7ffffff]
[ 0.899600] bus: 02 index 2 mmio: [d0000000, d1ffffff]
[ 0.899603] bus: 02 index 3 mmio: [0, 0]
[ 0.899606] bus: 03 index 0 io port: [3000, 3fff]
[ 0.899608] bus: 03 index 1 mmio: [d8000000, d9ffffff]
[ 0.899611] bus: 03 index 2 mmio: [d2000000, d3ffffff]
[ 0.899613] bus: 03 index 3 mmio: [0, 0]
[ 0.899616] bus: 05 index 0 io port: [4000, 4fff]
[ 0.899619] bus: 05 index 1 mmio: [da000000, dbffffff]
[ 0.899621] bus: 05 index 2 mmio: [d4000000, d5ffffff]
[ 0.899624] bus: 05 index 3 mmio: [0, 0]
[ 0.899626] bus: 07 index 0 io port: [5000, 5fff]
[ 0.899629] bus: 07 index 1 mmio: [dc000000, dc0fffff]
[ 0.899632] bus: 07 index 2 mmio: [88000000, 8bffffff]
[ 0.899634] bus: 07 index 3 io port: [0, ffff]
[ 0.899637] bus: 07 index 4 mmio: [0, ffffffff]
[ 0.899639] bus: 08 index 0 io port: [5000, 50ff]
[ 0.899642] bus: 08 index 1 io port: [5400, 54ff]
[ 0.899645] bus: 08 index 2 mmio: [88000000, 8bffffff]
[ 0.899647] bus: 08 index 3 mmio: [8c000000, 8fffffff]
[ 0.899657] NET: Registered protocol family 2
[ 0.912057] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.912316] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.912830] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.913113] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.913117] TCP reno registered
[ 0.920100] NET: Registered protocol family 1
[ 0.920233] checking if image is initramfs... it is
[ 1.712153] Freeing initrd memory: 8250k freed
[ 1.712356] Simple Boot Flag at 0x36 set to 0x1
[ 1.713642] audit: initializing netlink socket (disabled)
[ 1.713670] type=2000 audit(1231017081.712:1): initialized
[ 1.720509] highmem bounce pool size: 64 pages
[ 1.720516] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 1.723489] VFS: Disk quotas dquot_6.5.1
[ 1.723592] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.723715] msgmni has been set to 1743
[ 1.723854] io scheduler noop registered
[ 1.723857] io scheduler anticipatory registered
[ 1.723860] io scheduler deadline registered
[ 1.723874] io scheduler cfq registered (default)
[ 1.723889] pci 0000:00:02.0: Boot video device
[ 1.724133] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[ 1.724183] pcieport-driver 0000:00:1c.0: found MSI capability
[ 1.724235] pci_express 0000:00:1c.0:pcie00: allocate port service
[ 1.724286] pci_express 0000:00:1c.0:pcie02: allocate port service
[ 1.724339] pci_express 0000:00:1c.0:pcie03: allocate port service
[ 1.724463] pcieport-driver 0000:00:1c.1: setting latency timer to 64
[ 1.724511] pcieport-driver 0000:00:1c.1: found MSI capability
[ 1.724559] pci_express 0000:00:1c.1:pcie00: allocate port service
[ 1.724613] pci_express 0000:00:1c.1:pcie02: allocate port service
[ 1.724665] pci_express 0000:00:1c.1:pcie03: allocate port service
[ 1.724787] pcieport-driver 0000:00:1c.2: setting latency timer to 64
[ 1.724835] pcieport-driver 0000:00:1c.2: found MSI capability
[ 1.724883] pci_express 0000:00:1c.2:pcie00: allocate port service
[ 1.724932] pci_express 0000:00:1c.2:pcie02: allocate port service
[ 1.724984] pci_express 0000:00:1c.2:pcie03: allocate port service
[ 1.725407] isapnp: Scanning for PnP cards...
[ 2.079226] isapnp: No Plug & Play device found
[ 2.121400] hpet_resources: 0xfed00000 is busy
[ 2.121487] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[ 2.124221] brd: module loaded
[ 2.124301] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 2.124436] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 2.126880] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 2.128563] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.128571] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 2.128574] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 2.128577] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 2.128580] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 2.128989] mice: PS/2 mouse device common for all mice
[ 2.129153] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[ 2.129185] rtc0: alarms up to one month, y3k, hpet irqs
[ 2.129338] EISA: Probing bus 0 at eisa.0
[ 2.129346] Cannot allocate resource for EISA slot 1
[ 2.129350] Cannot allocate resource for EISA slot 2
[ 2.129352] Cannot allocate resource for EISA slot 3
[ 2.129355] Cannot allocate resource for EISA slot 4
[ 2.129358] Cannot allocate resource for EISA slot 5
[ 2.129373] EISA: Detected 0 cards.
[ 2.129377] cpuidle: using governor ladder
[ 2.129380] cpuidle: using governor menu
[ 2.129959] TCP cubic registered
[ 2.129988] Using IPI No-Shortcut mode
[ 2.130201] registered taskstats version 1
[ 2.130325] Magic number: 9:38:196
[ 2.130347] tty ttys8: hash matches
[ 2.130354] tty ttypb: hash matches
[ 2.130451] rtc_cmos 00:07: setting system clock to 2009-01-03 21:11:23 UTC (1231017083)
[ 2.130455] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 2.130458] EDD information not available.
[ 2.130709] Freeing unused kernel memory: 424k freed
[ 2.130762] Write protecting the kernel text: 2576k
[ 2.130794] Write protecting the kernel read-only data: 936k
[ 2.162676] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 2.282110] fuse init (API version 7.9)
[ 2.329918] ACPI: Transitioning device [FAN0] to D3
[ 2.329999] fan PNP0C0B:00: registered as cooling_device0
[ 2.330006] ACPI: Fan [FAN0] (off)
[ 2.358290] ACPI: SSDT 7F67E9D9, 01A8 (r1 PmRef Cpu0Ist 3000 INTL 20050624)
[ 2.358745] ACPI: SSDT 7F67E778, 01DC (r1 PmRef Cpu0Cst 3001 INTL 20050624)
[ 2.359485] ACPI: CPU0 (power states: C1[C1] C2[C2])
[ 2.359557] processor ACPI0007:00: registered as cooling_device1
[ 2.359562] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 2.359990] ACPI: SSDT 7F67EB81, 0089 (r1 PmRef Cpu1Ist 3000 INTL 20050624)
[ 2.360424] ACPI: SSDT 7F67E954, 0085 (r1 PmRef Cpu1Cst 3000 INTL 20050624)
[ 2.361045] Marking TSC unstable due to TSC halts in idle
[ 2.361248] ACPI: CPU1 (power states: C1[C1] C2[C2])
[ 2.361317] processor ACPI0007:01: registered as cooling_device2
[ 2.361322] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 2.364235] thermal LNXTHERM:01: registered as thermal_zone0
[ 2.364389] ACPI: Thermal Zone [TZ00] (42 C)
[ 2.366126] thermal LNXTHERM:02: registered as thermal_zone1
[ 2.375874] ACPI: Transitioning device [FAN0] to D0
[ 2.375877] ACPI: Unable to turn cooling device [f7814450] 'on'
[ 2.375881] ACPI: Thermal Zone [TZ01] (34 C)
[ 2.700774] ACPI: ACPI Dock Station Driver
[ 2.779929] e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.3-k6
[ 2.779934] e1000e: Copyright (c) 1999-2008 Intel Corporation.
[ 2.780061] e1000e 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.780080] e1000e 0000:02:00.0: setting latency timer to 64
[ 2.818026] usbcore: registered new interface driver usbfs
[ 2.818055] usbcore: registered new interface driver hub
[ 2.818252] usbcore: registered new device driver usb
[ 2.821071] USB Universal Host Controller Interface driver v3.0
[ 2.909661] 0000:02:00.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:a0:d1:4d:45:99
[ 2.909665] 0000:02:00.0: eth0: Intel(R) PRO/1000 Network Connection
[ 2.909743] 0000:02:00.0: eth0: MAC: 2, PHY: 2, PBA No: ffffff-0ff
[ 2.909861] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 2.909872] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 2.909876] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 2.909932] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 2.909973] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001820
[ 2.910160] usb usb1: configuration #1 chosen from 1 choice
[ 2.910193] hub 1-0:1.0: USB hub found
[ 2.910201] hub 1-0:1.0: 2 ports detected
[ 2.951979] SCSI subsystem initialized
[ 2.982508] libata version 3.00 loaded.
[ 3.116351] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 3.116363] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 3.116368] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 3.116397] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 3.116437] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840
[ 3.116545] usb usb2: configuration #1 chosen from 1 choice
[ 3.116576] hub 2-0:1.0: USB hub found
[ 3.116584] hub 2-0:1.0: 2 ports detected
[ 3.220342] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 3.220355] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 3.220360] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 3.220392] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[ 3.220434] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860
[ 3.220554] usb usb3: configuration #1 chosen from 1 choice
[ 3.220586] hub 3-0:1.0: USB hub found
[ 3.220595] hub 3-0:1.0: 2 ports detected
[ 3.229027] usb 1-2: new full speed USB device using uhci_hcd and address 2
[ 3.407227] usb 1-2: configuration #1 chosen from 1 choice
[ 3.428359] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[ 3.428374] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 3.428381] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 3.428429] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[ 3.428467] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001880
[ 3.428567] usb usb4: configuration #1 chosen from 1 choice
[ 3.428598] hub 4-0:1.0: USB hub found
[ 3.428606] hub 4-0:1.0: 2 ports detected
[ 3.532489] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 3.532505] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 3.532509] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 3.532535] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[ 3.536429] ehci_hcd 0000:00:1d.7: debug port 1
[ 3.536437] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 3.536444] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xdc444000
[ 3.544047] usb 3-1: new low speed USB device using uhci_hcd and address 2
[ 3.553046] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 3.553219] usb usb5: configuration #1 chosen from 1 choice
[ 3.553253] hub 5-0:1.0: USB hub found
[ 3.553263] hub 5-0:1.0: 8 ports detected
[ 3.608099] hub 3-0:1.0: unable to enumerate USB device on port 1
[ 3.624097] usb 1-2: USB disconnect, address 2
[ 3.760538] ohci1394 0000:07:06.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 3.810290] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[dc005000-dc0057ff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 3.813751] pata_acpi 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 3.813787] pata_acpi 0000:00:1f.2: setting latency timer to 64
[ 3.813802] pata_acpi 0000:00:1f.2: PCI INT B disabled
[ 3.818089] ata_piix 0000:00:1f.2: version 2.12
[ 3.818098] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 3.818103] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
[ 3.972071] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 3.972230] scsi0 : ata_piix
[ 3.972660] scsi1 : ata_piix
[ 3.973971] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x18b0 irq 14
[ 3.973975] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x18b8 irq 15
[ 4.136562] ata1.00: ATA-7: TOSHIBA MK1234GSX, AH001A, max UDMA/100
[ 4.136569] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 4.144566] ata1.00: configured for UDMA/100
[ 4.168052] usb 1-2: new full speed USB device using uhci_hcd and address 3
[ 4.308583] ata2.00: ATAPI: _NEC DVD_RW ND-7550A, 1.32, max UDMA/33
[ 4.324523] ata2.00: configured for UDMA/33
[ 4.324663] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK1234GS AH00 PQ: 0 ANSI: 5
[ 4.327484] scsi 1:0:0:0: CD-ROM _NEC DVD_RW ND-7550A 1.32 PQ: 0 ANSI: 5
[ 4.337890] scsi 0:0:0:0: Attached scsi generic sg0 type 0
[ 4.338030] scsi 1:0:0:0: Attached scsi generic sg1 type 5
[ 4.347540] usb 1-2: configuration #1 chosen from 1 choice
[ 4.352161] Driver 'sr' needs updating - please use bus_type methods
[ 4.357050] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 4.357055] Uniform CD-ROM driver Revision: 3.20
[ 4.357158] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 4.357307] Driver 'sd' needs updating - please use bus_type methods
[ 4.357404] sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
[ 4.357428] sd 0:0:0:0: [sda] Write Protect is off
[ 4.357431] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.357472] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.357545] sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
[ 4.357568] sd 0:0:0:0: [sda] Write Protect is off
[ 4.357571] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.357613] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.357618] sda:<6>usb 3-1: new low speed USB device using uhci_hcd and address 3
[ 4.760002] usb 3-1: configuration #1 chosen from 1 choice
[ 4.779258] usbcore: registered new interface driver hiddev
[ 4.794040] input: PS/2+USB Mouse as /devices/pci0000:00/0000:00:1d.2/usb3/3-1/3-1:1.0/input/input2
[ 4.794337] input,hidraw0: USB HID v1.00 Mouse [PS/2+USB Mouse] on usb-0000:00:1d.2-1
[ 4.794359] usbcore: registered new interface driver usbhid
[ 4.794362] usbhid: v2.6:USB HID core driver
[ 4.959199] sda1 sda4
[ 4.959443] sd 0:0:0:0: [sda] Attached SCSI disk
[ 7.619139] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 7.669517] ISO 9660 Extensions: RRIP_1991A
[ 7.987928] aufs 20080922
[ 7.995187] loop: module loaded
[ 8.309206] squashfs: version 3.3 (2007/10/31) Phillip Lougher
[ 50.706999] ACPI: EC: non-query interrupt received, switching to interrupt mode
[ 50.729110] ACPI: Battery Slot [BAT0] (battery present)
[ 71.025274] udevd version 124 started
[ 71.709934] Linux agpgart interface v0.103
[ 71.776280] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 71.847795] agpgart-intel 0000:00:00.0: Intel 945GM Chipset
[ 71.848368] agpgart-intel 0000:00:00.0: detected 7932K stolen memory
[ 71.866715] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
[ 71.930040] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 72.276766] iTCO_vendor_support: vendor-support=0
[ 72.335601] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008)
[ 72.335706] iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060)
[ 72.335859] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 72.645622] intel_rng: FWH not detected
[ 72.734956] input: PC Speaker as /devices/platform/pcspkr/input/input3
[ 72.774358] ACPI: AC Adapter [ADP0] (on-line)
[ 72.882619] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 72.910927] ACPI: Power Button (FF) [PWRF]
[ 72.911030] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input5
[ 73.088671] ACPI: Lid Switch [LID]
[ 73.088746] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input6
[ 73.140840] ACPI: Power Button (CM) [PWRB]
[ 73.150784] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 73.150817] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 73.179184] hda_codec: Unknown model for ALC861, trying auto-probe from BIOS...
[ 73.867151] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.26ks
[ 73.867156] iwl3945: Copyright(c) 2003-2008 Intel Corporation
[ 73.867286] iwl3945 0000:05:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 73.867302] iwl3945 0000:05:00.0: setting latency timer to 64
[ 73.867326] iwl3945: Detected Intel Wireless WiFi Link 3945ABG
[ 73.932038] iwl3945: Tunable channels: 11 802.11bg, 13 802.11a channels
[ 73.932643] phy0: Selected rate control algorithm 'iwl-3945-rs'
[ 74.089678] sdhci: Secure Digital Host Controller Interface driver
[ 74.089682] sdhci: Copyright(c) Pierre Ossman
[ 74.949953] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x2a0b1, caps: 0xb04713/0x60040d
[ 74.949961] synaptics: Toshiba Satellite A105 detected, limiting rate to 40pps.
[ 74.983419] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input7
[ 76.234358] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/device:02/input/input8
[ 76.264249] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 76.264731] acpi device:0a: registered as cooling_device3
[ 76.264881] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:07/input/input9
[ 76.272211] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 76.698588] iwl3945 0000:05:00.0: PCI INT A disabled
[ 76.698866] Yenta: CardBus bridge found at 0000:07:06.0 [1179:ff10]
[ 76.698889] Yenta: Enabling burst memory read transactions
[ 76.698896] Yenta: Using CSCINT to route CSC interrupts to PCI
[ 76.698899] Yenta: Routing CardBus interrupts to PCI
[ 76.698905] Yenta TI: socket 0000:07:06.0, mfunc 0x01a01b22, devctl 0x66
[ 76.928839] Yenta: ISA IRQ mask 0x0cf8, PCI irq 18
[ 76.928844] Socket status: 30000006
[ 76.928848] Yenta: Raising subordinate bus# of parent bus (#07) from #07 to #0b
[ 76.928855] pcmcia: parent PCI bridge I/O window: 0x5000 - 0x5fff
[ 76.928858] cs: IO port probe 0x5000-0x5fff: clean.
[ 76.929121] pcmcia: parent PCI bridge Memory window: 0xdc000000 - 0xdc0fffff
[ 76.929125] pcmcia: parent PCI bridge Memory window: 0x88000000 - 0x8bffffff
[ 76.929574] tifm_7xx1 0000:07:06.2: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 76.929799] sdhci-pci 0000:07:06.3: SDHCI controller found [104c:803c] (rev 0)
[ 76.929814] sdhci-pci 0000:07:06.3: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 76.929887] mmc0: SDHCI controller on PCI [0000:07:06.3] using DMA
[ 77.642309] cs: IO port probe 0x100-0x3af: clean.
[ 77.644368] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
[ 77.645216] cs: IO port probe 0x820-0x8ff: clean.
[ 77.645937] cs: IO port probe 0xc00-0xcf7: clean.
[ 77.646877] cs: IO port probe 0xa00-0xaff: clean.
[ 80.574528] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 82.525997] ACPI: WMI: Mapper loaded
[ 86.240185] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use)
[ 86.290523] apm: BIOS not found.
[ 86.530153] lp: driver loaded but no devices found
[ 86.600893] ppdev: user-space parallel port driver
[ 93.405370] Bluetooth: Core ver 2.13
[ 93.406645] NET: Registered protocol family 31
[ 93.406655] Bluetooth: HCI device and connection manager initialized
[ 93.406661] Bluetooth: HCI socket layer initialized
[ 93.623817] Bluetooth: L2CAP ver 2.11
[ 93.623829] Bluetooth: L2CAP socket layer initialized
[ 93.660180] Bluetooth: RFCOMM socket layer initialized
[ 93.660200] Bluetooth: RFCOMM TTY layer initialized
[ 93.660203] Bluetooth: RFCOMM ver 1.10
[ 93.796141] Bluetooth: SCO (Voice Link) ver 0.6
[ 93.796148] Bluetooth: SCO socket layer initialized
[ 94.465156] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 94.465169] Bluetooth: BNEP filters: protocol multicast
[ 94.998768] Bridge firewalling registered
[ 94.999048] pan0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.
[ 99.227170] iwl3945 0000:05:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 99.227335] iwl3945 0000:05:00.0: restoring config space at offset 0x1 (was 0x100002, writing 0x100006)
[ 99.227618] firmware: requesting iwlwifi-3945-1.ucode
[ 99.722952] iwl3945: Radio disabled by HW RF Kill switch
[ 99.723067] iwl3945 0000:05:00.0: PCI INT A disabled
[ 99.739296] iwl3945 0000:05:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 99.739465] iwl3945 0000:05:00.0: restoring config space at offset 0x1 (was 0x100002, writing 0x100006)
[ 99.743719] iwl3945: Radio disabled by HW RF Kill switch
[ 99.745131] iwl3945 0000:05:00.0: PCI INT A disabled
[ 100.114803] NET: Registered protocol family 17
[ 107.219185] [drm] Initialized drm 1.1.0 20060810
[ 107.276988] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 107.277001] pci 0000:00:02.0: setting latency timer to 64
[ 107.277193] [drm] Initialized i915 1.6.0 20060119 on minor 0
[ 167.912409] CPU0 attaching NULL sched-domain.
[ 167.912422] CPU1 attaching NULL sched-domain.
[ 167.919855] CPU0 attaching sched-domain:
[ 167.919863] domain 0: span 0-1 level MC
[ 167.919866] groups: 0 1
[ 167.919874] CPU1 attaching sched-domain:
[ 167.919876] domain 0: span 0-1 level MC
[ 167.919879] groups: 1 0
Module Size Used by
i915 38144 2
drm 86056 3 i915
binfmt_misc 16904 1
af_packet 25728 0
bridge 56980 0
stp 10628 1 bridge
bnep 20480 2
sco 18308 2
rfcomm 44432 0
l2cap 30464 6 bnep,rfcomm
bluetooth 61924 6 bnep,sco,rfcomm,l2cap
ppdev 15620 0
parport_pc 39204 0
lp 17156 0
parport 42604 3 ppdev,parport_pc,lp
acpi_cpufreq 15500 0
cpufreq_userspace 11396 0
cpufreq_stats 13188 0
cpufreq_powersave 9856 0
cpufreq_ondemand 14988 2
freq_table 12672 3 acpi_cpufreq,cpufreq_stats,cpufreq_ondemand
cpufreq_conservative 14600 0
wmi 14504 0
sbs 19464 0
sbshc 13440 1 sbs
pci_slot 12552 0
iptable_filter 10752 0
ip_tables 19600 1 iptable_filter
x_tables 22916 1 ip_tables
pcmcia 43052 0
joydev 18368 0
arc4 9984 2
video 25104 0
ecb 10880 2
container 11520 0
output 11008 1 video
crypto_blkcipher 25476 1 ecb
psmouse 45200 0
serio_raw 13444 0
sdhci_pci 15360 0
sdhci 23940 1 sdhci_pci
tifm_7xx1 13824 0
tifm_core 16028 1 tifm_7xx1
mmc_core 58268 1 sdhci
yenta_socket 31756 1
rsrc_nonstatic 19072 1 yenta_socket
iwl3945 98804 0
pcmcia_core 43412 3 pcmcia,yenta_socket,rsrc_nonstatic
rfkill 17176 2 iwl3945
mac80211 216820 1 iwl3945
led_class 12164 1 iwl3945
cfg80211 32392 2 iwl3945,mac80211
snd_hda_intel 381488 3
snd_pcm_oss 46848 0
snd_mixer_oss 22784 1 snd_pcm_oss
snd_pcm 83204 2 snd_hda_intel,snd_pcm_oss
snd_seq_dummy 10884 0
evdev 17696 12
button 14224 0
ac 12292 0
pcspkr 10624 0
snd_seq_oss 38528 0
snd_seq_midi 14336 0
snd_rawmidi 29824 1 snd_seq_midi
iTCO_wdt 18596 0
snd_seq_midi_event 15232 2 snd_seq_oss,snd_seq_midi
iTCO_vendor_support 11652 1 iTCO_wdt
snd_seq 57776 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
shpchp 37908 0
intel_agp 33724 1
snd_timer 29960 2 snd_pcm,snd_seq
pci_hotplug 35236 1 shpchp
snd_seq_device 15116 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
agpgart 42184 3 drm,intel_agp
snd 63268 15 snd_hda_intel,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
soundcore 15328 1 snd
snd_page_alloc 16136 2 snd_hda_intel,snd_pcm
battery 18436 0
squashfs 46600 1
loop 23180 2
aufs 169892 1
exportfs 12544 1 aufs
nls_cp437 13696 1
isofs 40100 1
usbhid 35840 0
hid 50560 1 usbhid
sd_mod 42264 2
crc_t10dif 9984 1 sd_mod
sr_mod 22212 1
cdrom 43168 1 sr_mod
sg 39732 0
ata_piix 24580 2
pata_acpi 12160 0
ata_generic 12932 0
libata 177312 3 ata_piix,pata_acpi,ata_generic
scsi_mod 155212 4 sd_mod,sr_mod,sg,libata
ohci1394 37936 0
ieee1394 96324 1 ohci1394
ehci_hcd 43276 0
uhci_hcd 30736 0
usbcore 148848 4 usbhid,ehci_hcd,uhci_hcd
e1000e 112680 0
dock 16656 1 libata
thermal 23708 0
processor 42156 4 acpi_cpufreq,thermal
fan 12548 0
fbcon 47648 0
tileblit 10880 1 fbcon
font 16512 1 fbcon
bitblit 13824 1 fbcon
softcursor 9984 1 bitblit
fuse 60828 5
( Guys..., I have to use my Internet browser ( Firefox ) in the Ubuntu 8.10..., Ok )
( One more thing..., by the way... Are there one “ White List of Modems for Linux kernel 2.6.27-7-generic ( later & sooner ) “ available
in the Web ? )
I've already reading all of them ( including Bootup.txt ) but I have no idea what to do..., please aid me with this and give some easy steps...,
I will appreciate your good will, in fact all assistance will be welcome, thank you very much...
Cheers,
Ademir
PS.: Just take a look below... and answer me how can I access the Bios and change it ( #1 ) or include those opitions ( # 2 ) or yet within
the Bios change the IRQ assingnments...
*** Bootup.txt ***
A modem device/card may be disabled at bootup, due to a variety of causes. Look at the bootup diagnostics record dmesg.txt and try to garner
some understanding from it. Attach it to your query to discuss@xxxxxxxxxxxxx
Possibilities therein are too diverse to be automagically processed by scanModem . A line including the PCI bus slot 00:1b.0 of your modem,
and "disable" or "disabling" predicts problems , though sometimes corrected later in the bootup. Similarly a line with "@" in the interrupt
(IRQ) for your 00:1b.0 slot is predictive of problems .
Possible corrections are:
1) Within the boot up BIOS, change from a Windows to a non-PNP/Other Operating System type. Instructions for accessing BIOS are at:
http://linmodems.technion.ac.il/resources.html
within: Additional Resources.
2a) Add an option "pci=routeirq" to the kernel boot up line. Here is an example paragraph from /boot/grub/menu.lst :
title Ubuntu, kernel 2.6.15-26-686
root (hd0,6)
kernel /boot/vmlinuz-2.6.15-26-686 root=/dev/hda7 ro pci=routeirq
initrd /boot/initrd.img-2.6.15-26-686
savedefault
2b) Same as above, but use "pollirq" instead of "pci=routeirq".
3) Within some BIOS setups, IRQ assignments can be changed.
4) On non-laptop systems, moving the modem card to another slot has helped.
5) Blacklist as many drivers as possible. See
http://linmodems.technion.ac.il/bigarch/archive-eighth/msg01593.html
6) Sometimes upgrading the kernel solves the problem.
7) Sometimes downgrading the kernel solves the problem.
8) Sometimes changing the Linux distribution solves the problem.
9) Get unloading.gz from
http://linmodems.technion.ac.il/linmodems/
This script unloads excess drivers which may be competing for resources. Before trying to set up the modem, do:
$ gunzip unloading.gz
$ chmod +x unloading
$ su - root
# ./unloading
Or for Ubuntu related Distros
$ sudo ./unloading
Veja quais são os assuntos do momento no Yahoo! +Buscados
http://br.maisbuscados.yahoo.com
