Cristian Goto http://packages.ubuntu.com/hardy-updates/linux-image-2.6.24-19-genericand down load the package. Under Linux install it with:$ sudo dpkg -i linux*.deb Then from http://linmodems.technion.ac.il/packages/ltmodem/11c11040/get theagrsm-ubuntu8.04.1-2.6.24-19-generic.tar.gz and try therein the$ sudo ./setup MarvS On Tue, Jan 6, 2009 at 6:23 PM, Cristian Degli Esposti Boschi<desposti@xxxxxxxxxx> wrote:> Notebook Toshiba Satellite L30 with Agere softmodem> OS: Ubuntu 8.04,> kernel version 2.6.24-22-386>> I see from ModemData.txt (attached) that> I have to use the agrmodem + agrserial + (patched) snd-hda-intel>>> Following the instructions in>> http://linmodems.technion.ac.> il/packages/ltmodem/11c11040/HOWTO-Agere-11c11040-HDA.html>> with>> ALSA> version: 1.0.16>> I patch the file hda_codec.c but agrsm-HDA-20080721.> tar.bz2 does not compile.> So, following the footnote, I borrow the> content of alsa-driver-1.0.16/alsa-kernel/pci/hda/> from the tarball of> the version 1.0.15. Patch the hda_codec.c file and compile the drivers>> successfully (note however that the module has underscores instead of> minuses, namely> sda_hda_intel). The modules are loaded and the> /dev/ttyAGS3 is created but>> wvdialconf reports "Sorry, no modem was> detected!">> Should I use setserial?>> If I issue ln -sf /dev/ttyAGS3> /dev/ttyS3>> wvdialconf reports the following> ttyS3<*1>: ATQ0 V1 E1 --> failed with 2400 baud, next try: 9600 baud> ttyS3<*1>: ATQ0 V1 E1 --> failed with 9600 baud, next try: 115200 baud> ttyS3<*1>: ATQ0 V1 E1 --> and failed too at 115200, giving up.>>> Sorry, no modem was detected!> Is it in use by another program?> Did you configure it properly with> setserial?>> Please read the FAQ at http://open.nit.ca/wiki/?WvDial>>>> From the latter wiki I get no useful informations, so I need help.> Thanks for your time>>>> Con Tiscali Voce 8 Mega telefoni e navighi senza limiti a soli €15 AL MESE PER 1 ANNO. In seguito paghi €29,90 al mese. Attiva entro il giorno 08/01/09! http://abbonati.tiscali.it/promo/voce8mega/
