Maurizio, Support type needed or chipset: hsfmodem For owners of a Dell PCs with Conexant HSF modems, a driver source package with full speed enabled is available, but requires driver compiling. Read DOCs/Conexant.txt Start at http://www.linuxant.com/drivers/hsf/downloads-license.php to find the hsfmodem package matching your System. For several Linux distros, there are precompiled drivers matched to specific kernels. These have within the FileName, your KernelVersion: 2.6.27_7_generic They can be found through http://www.linuxant.com/drivers/hsf/full/downloads.php A more precise location may be given a few paragraphs below. If an EXACT Match with your your KernelVersion is not found, one of the "Generic packages with source" near the bottom of the page must be used. Downloaded packages must be moved into the Linux partition (home folder is OK) and unzipped with: unzip hsf*.zip The installation command for a .deb suffic packages is, with root/adm permission: sudo dpkg -i hsf*.deb while for .rpm suffix it is, with: rpm -i hsf*.rpm From http://www.linuxant.com/drivers/hsf/full/downloads-ubuntu-x86.php download hsfmodem-7.68.00.12full_k2.6.27_7_generic_ubuntu_i386.deb.zip Under Linux unpack with: $ unzip hsfmodem*.zip Then install with: $ sudo dpkg -i hsfmodem*.deb Subsequently, the modem should be found with $ sudo wvdialconf /etc/wvdial.conf Edit in your personal information with: $ sudo gedit /etc/wvdial.conf and try dialing out with: $ sudo wvdial. See DOCs/Testing.txt for details. Read DOCs/Conexant.txt Regards, Antonio --- On Sat, 12/27/08, maurizio bandinelli <m.bandinelli@xxxxxxxxx> wrote: > From: maurizio bandinelli <m.bandinelli@xxxxxxxxx> > Subject: connessione analogica per ubunto8.10 > To: discuss@xxxxxxxxxxxxx > Date: Saturday, December 27, 2008, 9:59 AM > ciao vi allego il file di testo di scanModem se potete > aiutarmi grazie > Only plain text email is forwarded by the > Discuss@xxxxxxxxxxxxx List Server, > as HTML can contain viruses. Use as the email Subject > Line: > YourName, YourCountry kernel 2.6.27-7-generic > With this Subject Line cogent experts will be alerted, and > useful case names left in the Archive. > YourCountry will enable Country specific guidance. Linux > experts in YourCountry > can be found through: > http://www.linux.org/groups/index.html. > They will know your Country's modem code, which may be > essential for dialup service. > Responses from Discuss@xxxxxxxxxxxxx are sometimes blocked > by an Internet Provider mail filters. > So in a day, also check the Archived responses at > http://www.linmodems.org > -------------------------- System information > ---------------------------- > CPU=i686, > Linux version 2.6.27-7-generic (buildd@rothera) (gcc > version 4.3.2 (Ubuntu 4.3.2-1ubuntu10) ) #1 SMP Fri Oct 24 > 06:42:44 UTC 2008 > scanModem update of: 2008_11_06 > > There are no blacklisted modem drivers in /etc/modprobe* > files > Attached USB devices are: > ID 1d6b:0001 Linux Foundation 1.1 root hub > ID 045e:0084 Microsoft Corp. Basic Optical Mouse > ID 1d6b:0001 Linux Foundation 1.1 root hub > ID 0781:5406 SanDisk Corp. Cruzer Micro 1/4GB Flash Drive > ID 1d6b:0002 Linux Foundation 2.0 root hub > > USB modems not recognized > > For candidate card in slot 00:09.0, firmware information > and bootup diagnostics are: > PCI slot PCI ID SubsystemID Name > ---------- --------- --------- -------------- > 00:09.0 14f1:2f00 14f1:2004 Communication controller: > Conexant Systems, Inc. HSF 56k HSFi Modem > > Modem interrupt assignment and sharing: > 10: 1476 XT-PIC-XT SiS SI7012, eth0 > --- Bootup diagnostics for card in PCI slot 00:09.0 ---- > [ 0.478771] PCI: 0000:00:09.0 reg 10 32bit mmio: > [dffe0000, dffeffff] > [ 0.478782] PCI: 0000:00:09.0 reg 14 io port: [d000, > d007] > [ 0.478832] pci 0000:00:09.0: PME# supported from D3hot > D3cold > [ 0.478838] pci 0000:00:09.0: PME# disabled > > The PCI slot 00:09.0 of the modem card may be disabled > early in > a bootup process, but then enabled later. If modem > drivers load > but the modem is not responsive, read DOCs/Bootup.txt > about possible fixes. > Send dmesg.txt along with ModemData.txt to > discuss@xxxxxxxxxxxxx > if help is needed. > > > === Finished firmware and bootup diagnostics, next deducing > cogent software. === > > Predictive diagnostics for card in bus 00:09.0: > Modem chipset detected on > NAME="Communication controller: Conexant Systems, Inc. > HSF 56k HSFi Modem " > CLASS=0780 > PCIDEV=14f1:2f00 > SUBSYS=14f1:2004 > IRQ=10 > IDENT=hsfmodem > Driver=hsfmodem-drivers > > For candidate modem in: 00:09.0 > 0780 Communication controller: Conexant Systems, Inc. > HSF 56k HSFi Modem > Primary device ID: 14f1:2f00 > Support type needed or chipset: hsfmodem > > > > For owners of a Dell PCs with Conexant HSF modems, a driver > source package with full speed enabled is available, but > requires driver compiling. Read DOCs/Conexant.txt > > > Start at > http://www.linuxant.com/drivers/hsf/downloads-license.php to > find the > hsfmodem package matching your System. For several Linux > distros, there are > precompiled drivers matched to specific kernels. These have > within the FileName, > your KernelVersion: 2.6.27_7_generic > They can be found through > http://www.linuxant.com/drivers/hsf/full/downloads.php > A more precise location may be given a few paragraphs > below. > If an EXACT Match with your your KernelVersion is not > found, one of the > "Generic packages with source" near the bottom of > the page must be used. > Downloaded packages must be moved into the Linux partition > (home folder is OK) > and unzipped with: > unzip hsf*.zip > The installation command for a .deb suffic packages is, > with root/adm permission: > sudo dpkg -i hsf*.deb > while for .rpm suffix it is, with: > rpm -i hsf*.rpm > From > http://www.linuxant.com/drivers/hsf/full/downloads-ubuntu-x86.php > download > hsfmodem-7.68.00.12full_k2.6.27_7_generic_ubuntu_i386.deb.zip > > Under Linux unpack with: > $ unzip hsfmodem*.zip > Then install with: > $ sudo dpkg -i hsfmodem*.deb > Subsequently, the modem should be found with > $ sudo wvdialconf /etc/wvdial.conf > Edit in your personal information with: > $ sudo gedit /etc/wvdial.conf > and try dialing out with: > $ sudo wvdial. > See DOCs/Testing.txt for details. > > Read DOCs/Conexant.txt > > Writing DOCs/Conexant.txt > > > Completed candidate modem analyses. > > The base of the UDEV device file system is: /dev/.udev > > Versions adequately match for the compiler installed: > 4.3.2 > and the compiler used in kernel assembly: > 4.3.2 > > > > Minimal compiling resources appear complete: > make utility - /usr/bin/make > Compiler version 4.3 > linuc_headers base folder > /lib/modules/2.6.27-7-generic/build > > However some compilations and executable functions may > need additional files, > in the FileNames.h (so called kernel "h"eaders) > collection installed in /usr/include/ . > For martian_modem, additional required packages are > needed. The also required headers of package libc6 are > commonly installed by default. > Compiling hsfmodem drivers does require linux-libc-dev and > libc6-dev packages, for kernels 2.6.24 and later versions. > In not included on your install CD, search for them at > http://packages.ubuntu.com > or comparable Repository for other Linux distros. > When compiling ALSA drivers, the utility "patch" > will also be needed. > > > > > If a driver compilation fails, with message including some > lack of some FileName.h (stdio.h for example), then > Some additional kernel-header files need installation to > /usr/include. The minimal additional packages are libc6-dev > and any of its dependents, under Ubuntu linux-libc-dev > > If an alternate ethernet connection is available, > $ apt-get update > $ apt-get -s install linux-kernel-devel > will install needed packages. > For Debian/Ubuntu related distributions, run the following > command to display the needed package list: > > Otherwise packages have to be found through > http://packages.ubuntu.com > Once downloaded and transferred into a Linux partition, > they can be installed alltogether with: > $ sudo dpkg -i *.deb > > > Checking pppd properties: > -rwsr-xr-- 1 root dip 273064 2008-10-16 03:51 > /usr/sbin/pppd > > In case of an "error 17" "serial > loopback" problem, see: > > http://linmodems.technion.ac.il/linmodems/archive-sixth/msg02637.html > > To enable dialout without Root permission do: > $ su - root (not for Ubuntu) > sudo chmod a+x /usr/sbin/pppd > or under Ubuntu related Linuxes > sudo chmod a+x /usr/sbin/pppd > > Checking settings of: /etc/ppp/options > asyncmap 0 > noauth > crtscts > lock > hide-password > modem > proxyarp > lcp-echo-interval 30 > lcp-echo-failure 4 > noipx > > In case of a message like: > Warning: Could not modify /etc/ppp/pap-secrets: > Permission denied > see > http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html > > Read Modem/DOCs/YourSystem.txt concerning other COMM > channels: eth0 > Which can interfere with Browser naviagation. > > Don't worry about the following, it is for experts > should trouble shooting be necessary. > ========================================================== > > Checking for modem support lines: > -------------------------------------- > /device/modem symbolic link: > slmodemd created symbolic link /dev/ttySL0: > Within /etc/udev/ files: > > Within /etc/modprobe.conf files: > /etc/modprobe.d/blacklist-modem:# Uncomment these entries > in order to blacklist unwanted modem drivers > /etc/modprobe.d/blacklist-modem:# blacklist > snd-atiixp-modem > /etc/modprobe.d/blacklist-modem:# blacklist > snd-via82xx-modem > /etc/modprobe.d/alsa-base:options snd-atiixp-modem index=-2 > /etc/modprobe.d/alsa-base:options snd-via82xx-modem > index=-2 > Within any ancient /etc/devfs files: > > Within ancient kernel 2.4.n /etc/module.conf files: > > --------- end modem support lines --------
