Dawit, Compiling martian drivers does require linux-libc-dev and libc6-dev packages, for kernels 2.6.24 and later versions. In not included on your install CD, search for them at http://packages.ubuntu.com When downloaded and copied to your Ubuntu partition, they can be jointly installed with: $ sudo dpkg -i li*.deb This problem; [ 0.116321] pci 0000:00:07.0: PME# disabled may be cured by a reboot before loading martian_dev MarvS scanModem maintainer On Sun, Dec 14, 2008 at 8:43 PM, Antonio Olivares <olivares14031@xxxxxxxxx> wrote: > Dawit > > Download the file > http://linmodems.technion.ac.il/packages/ltmodem/kernel-2.6/martian/martian-full-20080625.tar.gz > > Copy it over to your linux patition, then fire up a terminal > Extract it wtih > $ tar -zxvf martian-full-20080625.tar.gz > $ cd martian-full-20080625/ > $ make all > $ sudo make install > $ sudo modprobe martian_dev > $ sudo martian_modem > > Leave this running, then open up a tab/terminal > $ sudo wvdialconf /etc/wvdial.conf > should find the modem port then, if it does /dev/ttySM0 should be the modem port > Then using sudo > $ sudo gedit /etc/wvdial.conf > and add your username/password remove the ";" and "<"">"' characters. > Also add your ISP's phone number and a line > Carrier Check = no > to /etc/wvdial.conf > > There might be an easier way, but this is what is done to get the > modem running under linux. > > Regards, > > Antonio > > On Sun, Dec 14, 2008 at 9:55 PM, Cruising Eagle <yemejemeria@xxxxxxxxx> wrote: >> >> Dear Antonio, >> The process seems to be QUITE challenging with the commands not working and the files and directories not being displayed! Is there no other way to work around this problem? If this is the ABSOLUTE WAY, let me know so that I can buckle up! >> >> Thanks for your reply, >> >> >> >> --- On Sun, 12/14/08, Antonio Olivares <olivares14031@xxxxxxxxx> wrote: >> >>> From: Antonio Olivares <olivares14031@xxxxxxxxx> >>> Subject: Re: Dawit, Ethiopia kernel 2.6.27-7-generic - A TECRA laptop >>> To: yemejemeria@xxxxxxxxx >>> Cc: "Linmodems linmodems.org" <discuss@xxxxxxxxxxxxx> >>> Date: Sunday, December 14, 2008, 7:14 PM >>> For this modem, it appears that you need martian modem >>> driver: >>> >>> For candidate modem in: 00:07.0 >>> 0780 Communication controller: Agere Systems 56k >>> WinModem >>> Primary device ID: 11c1:0441 >>> Support type needed or chipset: Agere.DSP >>> >>> >>> ----------------end Softmodem section -------------- >>> >>> The modem has a Lucent/Agere/LSI Mars or Apollo DSP >>> (digital signal >>> processing) chipset. >>> Support packages for 2.6.n kernels are at: >>> >>> http://linmodems.technion.ac.il/packages/ltmodem/kernel-2.6/martian/ >>> Always use the most update for kernels after 2.6.20, >>> currently >>> martian-full-20080625.tar.gz >>> For kernels 2.6.20 and less, usr >>> martian-full-20080407.tar.gz. >>> >>> See DOCs/AgereDSP.txt for Details. >>> >>> >>> Regards, >>> >>> Antonio >>> >>> >>> On 12/14/08, Cruising Eagle <yemejemeria@xxxxxxxxx> >>> wrote: >>> > -------------------------- System information >>> ---------------------------- >>> > CPU=i686, >>> > Linux version 2.6.27-7-generic (buildd@rothera) (gcc >>> version 4.3.2 (Ubuntu >>> > 4.3.2-1ubuntu10) ) #1 SMP Fri Oct 24 06:42:44 UTC 2008 >>> > scanModem update of: 2008_11_06 >>> > The modem symbolic link is /dev/modem -> ttySL0 >>> > There are no blacklisted modem drivers in >>> /etc/modprobe* files >>> > Attached USB devices are: >>> > ID 0930:6545 Toshiba Corp. >>> > ID 1d6b:0001 Linux Foundation 1.1 root hub >>> > >>> > USB modems not recognized >>> > >>> > For candidate card in slot 00:07.0, firmware >>> information and bootup >>> > diagnostics are: >>> > PCI slot PCI ID SubsystemID Name >>> > ---------- --------- --------- -------------- >>> > 00:07.0 11c1:0441 1179:0001 Communication controller: >>> Agere Systems 56k >>> > WinModem >>> > >>> > Modem interrupt assignment and sharing: >>> > --- Bootup diagnostics for card in PCI slot 00:07.0 >>> ---- >>> > [ 0.116191] PCI: 0000:00:07.0 reg 10 32bit mmio: >>> [ffefff00, ffefffff] >>> > [ 0.116213] PCI: 0000:00:07.0 reg 14 io port: [2f8, >>> 2ff] >>> > [ 0.116232] PCI: 0000:00:07.0 reg 18 io port: >>> [1c00, 1cff] >>> > [ 0.116292] pci 0000:00:07.0: supports D2 >>> > [ 0.116304] pci 0000:00:07.0: PME# supported from >>> D2 D3hot D3cold >>> > [ 0.116321] pci 0000:00:07.0: PME# disabled >>> > >>> > The PCI slot 00:07.0 of the modem card may be >>> disabled early in >>> > a bootup process, but then enabled later. If modem >>> drivers load >>> > but the modem is not responsive, read >>> DOCs/Bootup.txt about possible >>> > fixes. >>> > Send dmesg.txt along with ModemData.txt to >>> discuss@xxxxxxxxxxxxx >>> > if help is needed. >>> > >>> > >>> > === Finished firmware and bootup diagnostics, next >>> deducing cogent software. >>> > === >>> > >>> > Predictive diagnostics for card in bus 00:07.0: >>> > Modem chipset detected on >>> > NAME="Communication controller: Agere Systems 56k >>> WinModem " >>> > CLASS=0780 >>> > PCIDEV=11c1:0441 >>> > SUBSYS=1179:0001 >>> > IRQ=3 >>> > IDENT=Agere.DSP >>> > >>> > For candidate modem in: 00:07.0 >>> > 0780 Communication controller: Agere Systems 56k >>> WinModem >>> > Primary device ID: 11c1:0441 >>> > Support type needed or chipset: Agere.DSP >>> > >>> > >>> > ----------------end Softmodem section -------------- >>> > >>> > The modem has a Lucent/Agere/LSI Mars or Apollo DSP >>> (digital signal >>> > processing) chipset. >>> > Support packages for 2.6.n kernels are at: >>> > >>> http://linmodems.technion.ac.il/packages/ltmodem/kernel-2.6/martian/ >>> > Always use the most update for kernels after 2.6.20, >>> currently >>> > martian-full-20080625.tar.gz >>> > For kernels 2.6.20 and less, usr >>> martian-full-20080407.tar.gz. >>> > >>> > See DOCs/AgereDSP.txt for Details. >>> > >>> > >>> > Vendor 11c1 is Lucent Technologies with modem >>> technology now under LSI Inc. >>> > Their Linux code developer/maintainer is Soumyendu >>> Sarkar. Support for a >>> > chipset and its >>> > continued maintenance is only initiated at the >>> request of a major chipset >>> > buyer, >>> > or comparable sponsor. Several different modem >>> chipset types are >>> > produced: >>> > with varying support under Linux. >>> > Device ID Support Name Comment >>> > --------- ------------- ----------- >>> ----------------------------- >>> > 0480 serial_drivers Venus controller >>> chipset 1673JV7 >>> > 0440-045d martian Mars/Apollo DSP >>> (digital signal processing) >>> > chipsets >>> > 0462 none 56K.V90/ADSL Wildwire >>> > 048d none SV2P soft modem >>> > 048(c or f) AGRSM SV2P soft modem >>> > 0600 none soft modem, very few in >>> the field. >>> > 0620 AGRSM Pinball soft modem, in >>> some HP desktop PCs >>> > 011c11040 AGRSM hosted on High Definition >>> Audio cards >>> > 062(1-3) none SV92PP,Pinball soft >>> modem, in some HP desktop >>> > PCs >>> > >>> > martian - At >>> > >>> http://linmodems.technion.ac.il/packages/ltmodem/kernel-2.6/martian/ >>> > AGRSM - At >>> http://linmodems.technion.ac.il/packages/ltmodem/11c11040/ >>> > Compiling resources for a driver module pair: >>> agrmodem.ko + agrserial.ko >>> > Use the agrsm-HDA-20080721-ALSA15.tar.bz2 or >>> agrsm-HDA-20080721.tar.bz2 >>> > Read the agrsm_howto.txt. For 11c11040 chips, also >>> the >>> > HOWTO-Agere-11c11040-HDA.html >>> > >>> > 0x0441 -- Mars 2 - data/fax only >>> > -------------- end Agere Systems section >>> ------------------- >>> > >>> > Completed candidate modem analyses. >>> > >>> > The base of the UDEV device file system is: >>> /dev/.udev >>> > >>> > Versions adequately match for the compiler installed: >>> 4.3.2 >>> > and the compiler used in kernel assembly: >>> 4.3.2 >>> > >>> > >>> > >>> > Minimal compiling resources appear complete: >>> > make utility - /usr/bin/make >>> > Compiler version 4.3 >>> > linuc_headers base folder >>> /lib/modules/2.6.27-7-generic/build >>> > >>> > However some compilations and executable functions >>> may need additional >>> > files, >>> > in the FileNames.h (so called kernel >>> "h"eaders) collection installed in >>> > /usr/include/ . >>> > For martian_modem, additional required packages are >>> needed. The also >>> > required headers of package libc6 are commonly >>> installed by default. >>> > Compiling hsfmodem drivers does require >>> linux-libc-dev and libc6-dev >>> > packages, for kernels 2.6.24 and later versions. >>> > In not included on your install CD, search for them >>> at >>> > http://packages.ubuntu.com >>> > or comparable Repository for other Linux distros. >>> > When compiling ALSA drivers, the utility >>> "patch" will also be needed. >>> > >>> > >>> > >>> > >>> > If a driver compilation fails, with message including >>> some lack of some >>> > FileName.h (stdio.h for example), then >>> > Some additional kernel-header files need installation >>> to /usr/include. The >>> > minimal additional packages are libc6-dev >>> > and any of its dependents, under Ubuntu linux-libc-dev >>> > >>> > If an alternate ethernet connection is available, >>> > $ apt-get update >>> > $ apt-get -s install linux-kernel-devel >>> > will install needed packages. >>> > For Debian/Ubuntu related distributions, run the >>> following command to >>> > display the needed package list: >>> > >>> > Otherwise packages have to be found through >>> http://packages.ubuntu.com >>> > Once downloaded and transferred into a Linux >>> partition, >>> > they can be installed alltogether with: >>> > $ sudo dpkg -i *.deb >>> > >>> > Checking settings of: /etc/ppp/options >>> > asyncmap 0 >>> > noauth >>> > crtscts >>> > lock >>> > hide-password >>> > modem >>> > proxyarp >>> > lcp-echo-interval 30 >>> > lcp-echo-failure 4 >>> > noipx >>> > >>> > In case of a message like: >>> > Warning: Could not modify /etc/ppp/pap-secrets: >>> Permission denied >>> > see >>> http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html >>> > >>> > >>> > Don't worry about the following, it is for >>> experts should trouble shooting >>> > be necessary. >>> > >>> ========================================================== >>> > >>> > # start/stop the daemon when the USB modem is >>> connected >>> > KERNEL=="slusb[0-9]*", >>> GROUP="dialout", >>> RUN+="/etc/init.d/sl-modem-daemon" >>> > Checking for modem support lines: >>> > -------------------------------------- >>> > /device/modem symbolic link: lrwxrwxrwx 1 root >>> root 6 2008-12-12 >>> > 23:39 /dev/modem -> ttySL0 >>> > slmodemd created symbolic link /dev/ttySL0: >>> > Within /etc/udev/ files: >>> > /etc/udev/rules.d/030_sl-modem-daemon.rules:# >>> start/stop the daemon when the >>> > USB modem is connected >>> > >>> /etc/udev/rules.d/030_sl-modem-daemon.rules:KERNEL=="slusb[0-9]*", >>> > GROUP="dialout", >>> RUN+="/etc/init.d/sl-modem-daemon" >>> > /etc/udev/sl-modem-daemon.rules:# start/stop the >>> daemon when the USB modem >>> > is connected >>> > >>> /etc/udev/sl-modem-daemon.rules:KERNEL=="slusb[0-9]*", >>> GROUP="dialout", >>> > RUN+="/etc/init.d/sl-modem-daemon" >>> > Within /etc/modprobe.conf files: >>> > /etc/modprobe.d/alsa-base:options snd-atiixp-modem >>> index=-2 >>> > /etc/modprobe.d/alsa-base:options snd-via82xx-modem >>> index=-2 >>> > /etc/modprobe.d/blacklist-modem:# Uncomment these >>> entries in order to >>> > blacklist unwanted modem drivers >>> > /etc/modprobe.d/blacklist-modem:# blacklist >>> snd-atiixp-modem >>> > /etc/modprobe.d/blacklist-modem:# blacklist >>> snd-via82xx-modem >>> > /etc/modprobe.d/sl-modem-daemon.modutils:install slamr >>> modprobe >>> > --ignore-install ungrab-winmodem ; modprobe >>> --ignore-install slamr; test -e >>> > /dev/slamr0 || (/bin/mknod -m 660 /dev/slamr0 c 242 0 >>> 2>/dev/null && chgrp >>> > dialout /dev/slamr0) >>> > Within any ancient /etc/devfs files: >>> > >>> > Within ancient kernel 2.4.n /etc/module.conf >>> files: >>> > >>> > --------- end modem support lines -------- >>> > >>> > >>> > >>> > >>> > >> >> >> >> >
