For this modem, it appears that you need martian modem driver:
For candidate modem in: 00:07.0
0780 Communication controller: Agere Systems 56k WinModem
Primary device ID: 11c1:0441
Support type needed or chipset: Agere.DSP
----------------end Softmodem section --------------
The modem has a Lucent/Agere/LSI Mars or Apollo DSP (digital signal
processing) chipset.
Support packages for 2.6.n kernels are at:
http://linmodems.technion.ac.il/packages/ltmodem/kernel-2.6/martian/
Always use the most update for kernels after 2.6.20, currently
martian-full-20080625.tar.gz
For kernels 2.6.20 and less, usr martian-full-20080407.tar.gz.
See DOCs/AgereDSP.txt for Details.
Regards,
Antonio
On 12/14/08, Cruising Eagle <yemejemeria@xxxxxxxxx> wrote:
> -------------------------- System information ----------------------------
> CPU=i686,
> Linux version 2.6.27-7-generic (buildd@rothera) (gcc version 4.3.2 (Ubuntu
> 4.3.2-1ubuntu10) ) #1 SMP Fri Oct 24 06:42:44 UTC 2008
> scanModem update of: 2008_11_06
> The modem symbolic link is /dev/modem -> ttySL0
> There are no blacklisted modem drivers in /etc/modprobe* files
> Attached USB devices are:
> ID 0930:6545 Toshiba Corp.
> ID 1d6b:0001 Linux Foundation 1.1 root hub
>
> USB modems not recognized
>
> For candidate card in slot 00:07.0, firmware information and bootup
> diagnostics are:
> PCI slot PCI ID SubsystemID Name
> ---------- --------- --------- --------------
> 00:07.0 11c1:0441 1179:0001 Communication controller: Agere Systems 56k
> WinModem
>
> Modem interrupt assignment and sharing:
> --- Bootup diagnostics for card in PCI slot 00:07.0 ----
> [ 0.116191] PCI: 0000:00:07.0 reg 10 32bit mmio: [ffefff00, ffefffff]
> [ 0.116213] PCI: 0000:00:07.0 reg 14 io port: [2f8, 2ff]
> [ 0.116232] PCI: 0000:00:07.0 reg 18 io port: [1c00, 1cff]
> [ 0.116292] pci 0000:00:07.0: supports D2
> [ 0.116304] pci 0000:00:07.0: PME# supported from D2 D3hot D3cold
> [ 0.116321] pci 0000:00:07.0: PME# disabled
>
> The PCI slot 00:07.0 of the modem card may be disabled early in
> a bootup process, but then enabled later. If modem drivers load
> but the modem is not responsive, read DOCs/Bootup.txt about possible
> fixes.
> Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx
> if help is needed.
>
>
> === Finished firmware and bootup diagnostics, next deducing cogent software.
> ===
>
> Predictive diagnostics for card in bus 00:07.0:
> Modem chipset detected on
> NAME="Communication controller: Agere Systems 56k WinModem "
> CLASS=0780
> PCIDEV=11c1:0441
> SUBSYS=1179:0001
> IRQ=3
> IDENT=Agere.DSP
>
> For candidate modem in: 00:07.0
> 0780 Communication controller: Agere Systems 56k WinModem
> Primary device ID: 11c1:0441
> Support type needed or chipset: Agere.DSP
>
>
> ----------------end Softmodem section --------------
>
> The modem has a Lucent/Agere/LSI Mars or Apollo DSP (digital signal
> processing) chipset.
> Support packages for 2.6.n kernels are at:
> http://linmodems.technion.ac.il/packages/ltmodem/kernel-2.6/martian/
> Always use the most update for kernels after 2.6.20, currently
> martian-full-20080625.tar.gz
> For kernels 2.6.20 and less, usr martian-full-20080407.tar.gz.
>
> See DOCs/AgereDSP.txt for Details.
>
>
> Vendor 11c1 is Lucent Technologies with modem technology now under LSI Inc.
> Their Linux code developer/maintainer is Soumyendu Sarkar. Support for a
> chipset and its
> continued maintenance is only initiated at the request of a major chipset
> buyer,
> or comparable sponsor. Several different modem chipset types are
> produced:
> with varying support under Linux.
> Device ID Support Name Comment
> --------- ------------- ----------- -----------------------------
> 0480 serial_drivers Venus controller chipset 1673JV7
> 0440-045d martian Mars/Apollo DSP (digital signal processing)
> chipsets
> 0462 none 56K.V90/ADSL Wildwire
> 048d none SV2P soft modem
> 048(c or f) AGRSM SV2P soft modem
> 0600 none soft modem, very few in the field.
> 0620 AGRSM Pinball soft modem, in some HP desktop PCs
> 011c11040 AGRSM hosted on High Definition Audio cards
> 062(1-3) none SV92PP,Pinball soft modem, in some HP desktop
> PCs
>
> martian - At
> http://linmodems.technion.ac.il/packages/ltmodem/kernel-2.6/martian/
> AGRSM - At http://linmodems.technion.ac.il/packages/ltmodem/11c11040/
> Compiling resources for a driver module pair: agrmodem.ko + agrserial.ko
> Use the agrsm-HDA-20080721-ALSA15.tar.bz2 or agrsm-HDA-20080721.tar.bz2
> Read the agrsm_howto.txt. For 11c11040 chips, also the
> HOWTO-Agere-11c11040-HDA.html
>
> 0x0441 -- Mars 2 - data/fax only
> -------------- end Agere Systems section -------------------
>
> Completed candidate modem analyses.
>
> The base of the UDEV device file system is: /dev/.udev
>
> Versions adequately match for the compiler installed: 4.3.2
> and the compiler used in kernel assembly: 4.3.2
>
>
>
> Minimal compiling resources appear complete:
> make utility - /usr/bin/make
> Compiler version 4.3
> linuc_headers base folder /lib/modules/2.6.27-7-generic/build
>
> However some compilations and executable functions may need additional
> files,
> in the FileNames.h (so called kernel "h"eaders) collection installed in
> /usr/include/ .
> For martian_modem, additional required packages are needed. The also
> required headers of package libc6 are commonly installed by default.
> Compiling hsfmodem drivers does require linux-libc-dev and libc6-dev
> packages, for kernels 2.6.24 and later versions.
> In not included on your install CD, search for them at
> http://packages.ubuntu.com
> or comparable Repository for other Linux distros.
> When compiling ALSA drivers, the utility "patch" will also be needed.
>
>
>
>
> If a driver compilation fails, with message including some lack of some
> FileName.h (stdio.h for example), then
> Some additional kernel-header files need installation to /usr/include. The
> minimal additional packages are libc6-dev
> and any of its dependents, under Ubuntu linux-libc-dev
>
> If an alternate ethernet connection is available,
> $ apt-get update
> $ apt-get -s install linux-kernel-devel
> will install needed packages.
> For Debian/Ubuntu related distributions, run the following command to
> display the needed package list:
>
> Otherwise packages have to be found through http://packages.ubuntu.com
> Once downloaded and transferred into a Linux partition,
> they can be installed alltogether with:
> $ sudo dpkg -i *.deb
>
> Checking settings of: /etc/ppp/options
> asyncmap 0
> noauth
> crtscts
> lock
> hide-password
> modem
> proxyarp
> lcp-echo-interval 30
> lcp-echo-failure 4
> noipx
>
> In case of a message like:
> Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
> see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html
>
>
> Don't worry about the following, it is for experts should trouble shooting
> be necessary.
> ==========================================================
>
> # start/stop the daemon when the USB modem is connected
> KERNEL=="slusb[0-9]*", GROUP="dialout", RUN+="/etc/init.d/sl-modem-daemon"
> Checking for modem support lines:
> --------------------------------------
> /device/modem symbolic link: lrwxrwxrwx 1 root root 6 2008-12-12
> 23:39 /dev/modem -> ttySL0
> slmodemd created symbolic link /dev/ttySL0:
> Within /etc/udev/ files:
> /etc/udev/rules.d/030_sl-modem-daemon.rules:# start/stop the daemon when the
> USB modem is connected
> /etc/udev/rules.d/030_sl-modem-daemon.rules:KERNEL=="slusb[0-9]*",
> GROUP="dialout", RUN+="/etc/init.d/sl-modem-daemon"
> /etc/udev/sl-modem-daemon.rules:# start/stop the daemon when the USB modem
> is connected
> /etc/udev/sl-modem-daemon.rules:KERNEL=="slusb[0-9]*", GROUP="dialout",
> RUN+="/etc/init.d/sl-modem-daemon"
> Within /etc/modprobe.conf files:
> /etc/modprobe.d/alsa-base:options snd-atiixp-modem index=-2
> /etc/modprobe.d/alsa-base:options snd-via82xx-modem index=-2
> /etc/modprobe.d/blacklist-modem:# Uncomment these entries in order to
> blacklist unwanted modem drivers
> /etc/modprobe.d/blacklist-modem:# blacklist snd-atiixp-modem
> /etc/modprobe.d/blacklist-modem:# blacklist snd-via82xx-modem
> /etc/modprobe.d/sl-modem-daemon.modutils:install slamr modprobe
> --ignore-install ungrab-winmodem ; modprobe --ignore-install slamr; test -e
> /dev/slamr0 || (/bin/mknod -m 660 /dev/slamr0 c 242 0 2>/dev/null && chgrp
> dialout /dev/slamr0)
> Within any ancient /etc/devfs files:
>
> Within ancient kernel 2.4.n /etc/module.conf files:
>
> --------- end modem support lines --------
>
>
>
>
>
