Only plain text email is forwarded by the Discuss@xxxxxxxxxxxxx List Server,
as HTML can contain viruses. Use as the email Subject Line:
YourName, YourCountry kernel 2.6.27-9-generic
With this Subject Line cogent experts will be alerted, and useful case names left in the Archive.
YourCountry will enable Country specific guidance. Linux experts in YourCountry
can be found through: http://www.linux.org/groups/index.html.
They will know your Country's modem code, which may be essential for dialup service.
Responses from Discuss@xxxxxxxxxxxxx are sometimes blocked by an Internet Provider mail filters.
So in a day, also check the Archived responses at http://www.linmodems.org
-------------------------- System information ----------------------------
CPU=i686,
Linux version 2.6.27-9-generic (buildd@rothera) (gcc version 4.3.2 (Ubuntu 4.3.2-1ubuntu11) ) #1 SMP Thu Nov 20 21:57:00 UTC 2008
scanModem update of: 2008_11_06
The modem symbolic link is /dev/modem -> ttySL0
The slmodemd set symbolic link is /dev/ttySL0 -> /dev/pts/1
There are no blacklisted modem drivers in /etc/modprobe* files
Attached USB devices are:
ID 1d6b:0002 Linux Foundation 2.0 root hub
ID 046d:c016 Logitech, Inc. M-UV69a/HP M-UV96 Optical Wheel Mouse
ID 1d6b:0001 Linux Foundation 1.1 root hub
ID 1d6b:0001 Linux Foundation 1.1 root hub
USB modems not recognized
For candidate card in slot 00:02.6, firmware information and bootup diagnostics are:
PCI slot PCI ID SubsystemID Name
---------- --------- --------- --------------
00:02.6 1039:7013 1025:0083 Modem: Silicon Integrated Systems [SiS] AC'97 Modem Controller
Modem interrupt assignment and sharing:
18: 1325 IO-APIC-fasteoi SiS SI7012, SiS SI7013 Modem
--- Bootup diagnostics for card in PCI slot 00:02.6 ----
[ 0.490047] PCI: 0000:00:02.6 reg 10 io port: [1000, 10ff]
[ 0.490053] PCI: 0000:00:02.6 reg 14 io port: [1c00, 1c7f]
[ 0.490078] pci 0000:00:02.6: supports D1
[ 0.490080] pci 0000:00:02.6: supports D2
[ 0.490082] pci 0000:00:02.6: PME# supported from D3hot D3cold
[ 0.490087] pci 0000:00:02.6: PME# disabled
[ 2.177636] serial 0000:00:02.6: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 2.177643] serial 0000:00:02.6: PCI INT C disabled
[ 517.645203] Intel ICH Modem 0000:00:02.6: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 784.685151] Intel ICH Modem 0000:00:02.6: PCI INT C disabled
[ 784.992463] Intel ICH Modem 0000:00:02.6: PCI INT C -> GSI 18 (level, low) -> IRQ 18
The PCI slot 00:02.6 of the modem card may be disabled early in
a bootup process, but then enabled later. If modem drivers load
but the modem is not responsive, read DOCs/Bootup.txt about possible fixes.
Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx
if help is needed.
===== Advanced Linux Sound Architecture (ALSA) diagnostics =====
The ALSA packages provide audio support and also drivers for some modems.
ALSA diagnostics are written during bootup to /proc/asound/ folders.
The ALSA verion is 1.0.17
The modem cards detected by "aplay -l" are:
scheda 1: Modem [SiS SI7013 Modem], dispositivo 0: Intel ICH - Modem [SiS SI7013 Modem - Modem]
The /proc/asound/pcm file reports:
-----------------------
00-01: Intel ICH - MIC ADC : SiS SI7012 - MIC ADC : capture 1
00-00: Intel ICH : SiS SI7012 : playback 1 : capture 1
01-00: Intel ICH - Modem : SiS SI7013 Modem - Modem : playback 1 : capture 1
about /proc/asound/cards:
------------------------
0 [SI7012 ]: ICH - SiS SI7012
SiS SI7012 with ALC203 at irq 18
1 [Modem ]: ICH-MODEM - SiS SI7013 Modem
SiS SI7013 Modem at irq 18
Modem firmware information is in /proc/asound/card1/codec97#0/mc97#1-1
-----------------------------------------------
Extended modem ID: codec=1 LIN1
Lines in: /proc/asound/card1/codec97#0/mc97#1-1+regs
-------------------------------
0:7c = 5349 and 0:7e = 4c2f
are translated from hexadecimal code into the modem chip identifier: SIL2f
The driver snd-intel8x0m with its dependent drivers:
snd_intel8x0m 22412 5
snd_ac97_codec 111652 4 snd_atiixp_modem,snd_via82xx_modem,snd_intel8x0m,snd_intel8x0
snd_pcm 83204 8 snd_atiixp_modem,snd_via82xx_modem,snd_intel8x0m,snd_intel8x0,snd_ac97_codec,snd_pcm_oss
snd 63268 27 snd_atiixp_modem,snd_via82xx_modem,snd_intel8x0m,snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
snd_page_alloc 16136 5 snd_atiixp_modem,snd_via82xx_modem,snd_intel8x0m,snd_intel8x0,snd_pcm
----------
provide modem + audio support.
=== Finished firmware and bootup diagnostics, next deducing cogent software. ===
Predictive diagnostics for card in bus 00:02.6:
Modem chipset detected on
NAME="Modem: Silicon Integrated Systems [SiS] AC'97 Modem Controller "
CLASS=0703
PCIDEV=1039:7013
SUBSYS=1025:0083
IRQ=18
SOFT=1039:7013.MC97
CodecArchived=SIL2f
CodecDiagnosed=SIL2f
CodecClass=SIL
IDENT=slmodemd
SLMODEMD_DEVICE=modem:1
Driver=snd-intel8x0m
For candidate modem in: 00:02.6
0703 Modem: Silicon Integrated Systems [SiS] AC'97 Modem Controller
Primary device ID: 1039:7013
Subsystem PCI_id 1025:0083
Softmodem codec or chipset from diagnostics: SIL2f, an LSI/AgereSystems type
from Archives: SIL2f
Support type needed or chipset: slmodemd
An ALSA (Advanced Linux Sound Architecture) modem driver: snd-intel8x0m
provides Low Level support enabling contact with the modem hardware.
For all BUT Conexant chip soft modems (using hsfmodem software)
complementary High Level support is through a Smartlink utility: slmodemd
Download from http://linmodems.technion.ac.il/packages/smartlink/
the package SLMODEMD.gcc4.3.tar.gz having a compiled slmodemd. Unpack under Linux with:
$ tar zxf SLMODEMD.gcc4.3.tar.gz
and read instructions therein. But briefly, the modem is setup with command:
sudo slmodemd -c YOUR_COUNTRY --alsa modem:1
reporting dynamic creation of ports:
/dev/ttySL0 --> /dev/pts/N , with N some number
Read DOCs/Smartlink.txt and Modem/DOCs/YourSystem.txt for follow through guidance.
----------------end Softmodem section --------------
Writing DOCs/Smartlink.txt
============ end Smartlink section =====================
Completed candidate modem analyses.
The base of the UDEV device file system is: /dev/.udev
Versions adequately match for the compiler installed: 4.3.2
and the compiler used in kernel assembly: 4.3.2
Minimal compiling resources appear complete:
make utility - /usr/bin/make
Compiler version 4.3
linuc_headers base folder /lib/modules/2.6.27-9-generic/build
However some compilations and executable functions may need additional files,
in the FileNames.h (so called kernel "h"eaders) collection installed in /usr/include/ .
For martian_modem, additional required packages are needed. The also required headers of package libc6 are commonly installed by default.
Compiling hsfmodem drivers does require linux-libc-dev and libc6-dev packages, for kernels 2.6.24 and later versions.
In not included on your install CD, search for them at http://packages.ubuntu.com
or comparable Repository for other Linux distros.
When compiling ALSA drivers, the utility "patch" will also be needed.
If a driver compilation fails, with message including some lack of some FileName.h (stdio.h for example), then
Some additional kernel-header files need installation to /usr/include. The minimal additional packages are libc6-dev
and any of its dependents, under Ubuntu linux-libc-dev
If an alternate ethernet connection is available,
$ apt-get update
$ apt-get -s install linux-kernel-devel
will install needed packages.
For Debian/Ubuntu related distributions, run the following command to display the needed package list:
Otherwise packages have to be found through http://packages.ubuntu.com
Once downloaded and transferred into a Linux partition,
they can be installed alltogether with:
$ sudo dpkg -i *.deb
Checking settings of: /etc/ppp/options
asyncmap 0
noauth
crtscts
lock
hide-password
modem
proxyarp
lcp-echo-interval 30
lcp-echo-failure 4
noipx
In case of a message like:
Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html
Read Modem/DOCs/YourSystem.txt concerning other COMM channels: eth0 wlan0 wmaster0
Which can interfere with Browser naviagation.
Don't worry about the following, it is for experts should trouble shooting be necessary.
==========================================================
# start/stop the daemon when the USB modem is connected
KERNEL=="slusb[0-9]*", GROUP="dialout", RUN+="/etc/init.d/sl-modem-daemon"
Checking for modem support lines:
--------------------------------------
/device/modem symbolic link: lrwxrwxrwx 1 root root 6 2008-12-13 17:10 /dev/modem -> ttySL0
slmodemd created symbolic link /dev/ttySL0: lrwxrwxrwx 1 root root 10 2008-12-13 17:10 /dev/ttySL0 -> /dev/pts/1
Within /etc/udev/ files:
/etc/udev/rules.d/030_sl-modem-daemon.rules:# start/stop the daemon when the USB modem is connected
/etc/udev/rules.d/030_sl-modem-daemon.rules:KERNEL=="slusb[0-9]*", GROUP="dialout", RUN+="/etc/init.d/sl-modem-daemon"
/etc/udev/sl-modem-daemon.rules:# start/stop the daemon when the USB modem is connected
/etc/udev/sl-modem-daemon.rules:KERNEL=="slusb[0-9]*", GROUP="dialout", RUN+="/etc/init.d/sl-modem-daemon"
Within /etc/modprobe.conf files:
/etc/modprobe.d/alsa-base:options snd-atiixp-modem index=-2
/etc/modprobe.d/alsa-base:options snd-via82xx-modem index=-2
/etc/modprobe.d/sl-modem-daemon.modutils:install slamr modprobe --ignore-install ungrab-winmodem ; modprobe --ignore-install slamr; test -e /dev/slamr0 || (/bin/mknod -m 660 /dev/slamr0 c 242 0 2>/dev/null && chgrp dialout /dev/slamr0)
/etc/modprobe.d/blacklist-modem:# Uncomment these entries in order to blacklist unwanted modem drivers
/etc/modprobe.d/blacklist-modem:# blacklist snd-atiixp-modem
/etc/modprobe.d/blacklist-modem:# blacklist snd-via82xx-modem
Within any ancient /etc/devfs files:
Within ancient kernel 2.4.n /etc/module.conf files:
--------- end modem support lines --------
CPU0
0: 63885 IO-APIC-edge timer
1: 514 IO-APIC-edge i8042
8: 2 IO-APIC-edge rtc0
11: 1447 IO-APIC-fasteoi acpi
12: 6117 IO-APIC-edge i8042
14: 23156 IO-APIC-edge pata_sis
15: 6029 IO-APIC-edge pata_sis
17: 22847 IO-APIC-fasteoi b43
18: 1325 IO-APIC-fasteoi SiS SI7012, SiS SI7013 Modem
19: 1 IO-APIC-fasteoi yenta, eth0
20: 0 IO-APIC-fasteoi ohci_hcd:usb1
21: 22226 IO-APIC-fasteoi ohci_hcd:usb2
23: 2 IO-APIC-fasteoi ehci_hcd:usb3
NMI: 0 Non-maskable interrupts
LOC: 97418 Local timer interrupts
RES: 0 Rescheduling interrupts
CAL: 0 function call interrupts
TLB: 0 TLB shootdowns
SPU: 0 Spurious interrupts
ERR: 48
MIS: 0
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.27-9-generic (buildd@rothera) (gcc version 4.3.2 (Ubuntu 4.3.2-1ubuntu11) ) #1 SMP Thu Nov 20 21:57:00 UTC 2008 (Ubuntu 2.6.27-9.19-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
[ 0.000000] BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003bef0000 (usable)
[ 0.000000] BIOS-e820: 000000003bef0000 - 000000003befa000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003befa000 - 000000003bf00000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003bf00000 - 0000000040000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] last_pfn = 0x3bef0 max_arch_pfn = 0x100000
[ 0.000000] kernel direct mapping tables up to 38000000 @ 7000-c000
[ 0.000000] RAMDISK: 3781f000 - 37fef750
[ 0.000000] DMI present.
[ 0.000000] ACPI: RSDP 000F7F60, 0014 (r0 PTLTD )
[ 0.000000] ACPI: RSDT 3BEF619D, 0034 (r1 PTLTD RSDT 6040000 LTP 0)
[ 0.000000] ACPI: FACP 3BEF9E3E, 0074 (r1 SiS 755F 6040000 PTL F4240)
[ 0.000000] ACPI: DSDT 3BEF61D1, 3C6D (r1 PTLTD 755 6040000 MSFT 100000E)
[ 0.000000] ACPI: FACS 3BEFAFC0, 0040
[ 0.000000] ACPI: SSDT 3BEF9EB2, 00D6 (r1 PTLTD POWERNOW 6040000 LTP 1)
[ 0.000000] ACPI: APIC 3BEF9F88, 0050 (r1 PTLTD APIC 6040000 LTP 0)
[ 0.000000] ACPI: BOOT 3BEF9FD8, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1)
[ 0.000000] ACPI: DMI detected: Acer
[ 0.000000] 62MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 38000000
[ 0.000000] low ram: 00000000 - 38000000
[ 0.000000] bootmap 00008000 - 0000f000
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 0038000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0000100000 - 00005c0a20] TEXT DATA BSS ==> [0000100000 - 00005c0a20]
[ 0.000000] #4 [003781f000 - 0037fef750] RAMDISK ==> [003781f000 - 0037fef750]
[ 0.000000] #5 [00005c1000 - 00005c4000] INIT_PG_TABLE ==> [00005c1000 - 00005c4000]
[ 0.000000] #6 [000009f400 - 0000100000] BIOS reserved ==> [000009f400 - 0000100000]
[ 0.000000] #7 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000]
[ 0.000000] #8 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000]
[ 0.000000] found SMP MP-table at [c00f7fd0] 000f7fd0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x00038000
[ 0.000000] HighMem 0x00038000 -> 0x0003bef0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0003bef0
[ 0.000000] On node 0 totalpages: 245391
[ 0.000000] free_area_init_node: node 0, pgdat c048a580, node_mem_map c1000000
[ 0.000000] DMA zone: 3963 pages, LIFO batch:0
[ 0.000000] Normal zone: 223300 pages, LIFO batch:31
[ 0.000000] HighMem zone: 15970 pages, LIFO batch:3
[ 0.000000] ACPI: PM-Timer IO Port: 0x8008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ11 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] mapped APIC to ffffb000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000
[ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:bff00000)
[ 0.000000] PERCPU: Allocating 41628 bytes of per cpu data
[ 0.000000] NR_CPUS: 64, nr_cpu_ids: 1, nr_node_ids 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 243233
[ 0.000000] Kernel command line: root=UUID=46b72af9-c0c3-4aae-b34d-ffae3bdc0763 ro quiet splash
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] TSC: Unable to calibrate against PIT
[ 0.000000] TSC: using PMTIMER reference calibration
[ 0.000000] Detected 1800.062 MHz processor.
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.004000] Memory: 958788k/981952k available (2572k kernel code, 22404k reserved, 1160k data, 424k init, 64448k highmem)
[ 0.004000] virtual kernel memory layout:
[ 0.004000] fixmap : 0xffc77000 - 0xfffff000 (3616 kB)
[ 0.004000] pkmap : 0xff400000 - 0xff800000 (4096 kB)
[ 0.004000] vmalloc : 0xf8800000 - 0xff3fe000 ( 107 MB)
[ 0.004000] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 0.004000] .init : 0xc04ab000 - 0xc0515000 ( 424 kB)
[ 0.004000] .data : 0xc038335a - 0xc04a5680 (1160 kB)
[ 0.004000] .text : 0xc0100000 - 0xc038335a (2572 kB)
[ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated
[ 0.004000] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.004013] Calibrating delay loop (skipped), value calculated using timer frequency.. 3600.12 BogoMIPS (lpj=7200248)
[ 0.004038] Security Framework initialized
[ 0.004048] SELinux: Disabled at boot.
[ 0.004077] AppArmor: AppArmor initialized
[ 0.004086] Mount-cache hash table entries: 512
[ 0.004259] Initializing cgroup subsys ns
[ 0.004264] Initializing cgroup subsys cpuacct
[ 0.004267] Initializing cgroup subsys memory
[ 0.004283] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.004286] CPU: L2 Cache: 128K (64 bytes/line)
[ 0.004299] Checking 'hlt' instruction... OK.
[ 0.020446] SMP alternatives: switching to UP code
[ 0.026260] Freeing SMP alternatives: 11k freed
[ 0.026265] ACPI: Core revision 20080609
[ 0.027838] ACPI: Checking initramfs for custom DSDT
[ 0.404256] ENABLING IO-APIC IRQs
[ 0.404448] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.444154] CPU0: AMD Mobile AMD Sempron(tm) Processor 3000+ stepping 02
[ 0.448028] Brought up 1 CPUs
[ 0.448028] Total of 1 processors activated (3600.12 BogoMIPS).
[ 0.448028] CPU0 attaching sched-domain:
[ 0.448028] domain 0: span 0 level CPU
[ 0.448028] groups: 0
[ 0.448028] net_namespace: 840 bytes
[ 0.448028] Booting paravirtualized kernel on bare hardware
[ 0.448028] Time: 16:56:43 Date: 12/13/08
[ 0.448028] NET: Registered protocol family 16
[ 0.448028] EISA bus registered
[ 0.448028] ACPI: bus type pci registered
[ 0.448028] PCI: PCI BIOS revision 2.10 entry at 0xfd776, last bus=1
[ 0.448028] PCI: Using configuration type 1 for base access
[ 0.448028] ACPI: EC: Look up EC in DSDT
[ 0.449204] ACPI: Interpreter enabled
[ 0.449208] ACPI: (supports S0 S3 S4 S5)
[ 0.449223] ACPI: Using IOAPIC for interrupt routing
[ 0.449607] ACPI: EC: non-query interrupt received, switching to interrupt mode
[ 0.489712] ACPI: EC: GPE = 0x19, I/O: command/status = 0x66, data = 0x62
[ 0.489716] ACPI: EC: driver started in interrupt mode
[ 0.489779] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.489868] PCI: 0000:00:00.0 reg 10 32bit mmio: [e0000000, e1ffffff]
[ 0.489948] pci 0000:00:02.0: Enabling SiS 96x SMBus
[ 0.489975] PCI: 0000:00:02.1 reg 20 io port: [8100, 811f]
[ 0.489998] PCI: 0000:00:02.5 reg 10 io port: [1f0, 1f7]
[ 0.490004] PCI: 0000:00:02.5 reg 14 io port: [3f4, 3f7]
[ 0.490009] PCI: 0000:00:02.5 reg 18 io port: [170, 177]
[ 0.490014] PCI: 0000:00:02.5 reg 1c io port: [374, 377]
[ 0.490019] PCI: 0000:00:02.5 reg 20 io port: [2000, 200f]
[ 0.490047] PCI: 0000:00:02.6 reg 10 io port: [1000, 10ff]
[ 0.490053] PCI: 0000:00:02.6 reg 14 io port: [1c00, 1c7f]
[ 0.490078] pci 0000:00:02.6: supports D1
[ 0.490080] pci 0000:00:02.6: supports D2
[ 0.490082] pci 0000:00:02.6: PME# supported from D3hot D3cold
[ 0.490087] pci 0000:00:02.6: PME# disabled
[ 0.490105] PCI: 0000:00:02.7 reg 10 io port: [1400, 14ff]
[ 0.490111] PCI: 0000:00:02.7 reg 14 io port: [1c80, 1cff]
[ 0.490135] pci 0000:00:02.7: supports D1
[ 0.490137] pci 0000:00:02.7: supports D2
[ 0.490139] pci 0000:00:02.7: PME# supported from D3hot D3cold
[ 0.490143] pci 0000:00:02.7: PME# disabled
[ 0.490157] PCI: 0000:00:03.0 reg 10 32bit mmio: [e2002000, e2002fff]
[ 0.490190] PCI: 0000:00:03.1 reg 10 32bit mmio: [e2003000, e2003fff]
[ 0.490228] PCI: 0000:00:03.2 reg 10 32bit mmio: [e2004000, e2004fff]
[ 0.490255] pci 0000:00:03.2: PME# supported from D0 D3hot D3cold
[ 0.490259] pci 0000:00:03.2: PME# disabled
[ 0.490283] PCI: 0000:00:04.0 reg 10 io port: [1800, 18ff]
[ 0.490289] PCI: 0000:00:04.0 reg 14 32bit mmio: [e2005000, e2005fff]
[ 0.490307] PCI: 0000:00:04.0 reg 30 32bit mmio: [0, 1ffff]
[ 0.490317] pci 0000:00:04.0: supports D1
[ 0.490319] pci 0000:00:04.0: supports D2
[ 0.490321] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.490325] pci 0000:00:04.0: PME# disabled
[ 0.490347] PCI: 0000:00:06.0 reg 10 32bit mmio: [0, fff]
[ 0.490358] pci 0000:00:06.0: supports D1
[ 0.490360] pci 0000:00:06.0: supports D2
[ 0.490362] pci 0000:00:06.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.490366] pci 0000:00:06.0: PME# disabled
[ 0.490382] PCI: 0000:00:0b.0 reg 10 32bit mmio: [e2000000, e2001fff]
[ 0.490500] PCI: 0000:01:00.0 reg 10 32bit mmio: [e8000000, efffffff]
[ 0.490504] PCI: 0000:01:00.0 reg 14 32bit mmio: [e2100000, e211ffff]
[ 0.490509] PCI: 0000:01:00.0 reg 18 io port: [a000, a07f]
[ 0.490523] pci 0000:01:00.0: supports D1
[ 0.490525] pci 0000:01:00.0: supports D2
[ 0.490544] PCI: bridge 0000:00:01.0 io port: [a000, afff]
[ 0.490548] PCI: bridge 0000:00:01.0 32bit mmio: [e2100000, e21fffff]
[ 0.490552] PCI: bridge 0000:00:01.0 32bit mmio pref: [e8000000, efffffff]
[ 0.490569] bus 00 -> node 0
[ 0.490577] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.499622] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 *7 9 10 11)
[ 0.499743] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 *4 5 7 9 10 11)
[ 0.499857] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 9 10 11)
[ 0.499969] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 7 9 10 11)
[ 0.500125] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 *9 10 11)
[ 0.500238] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 *11)
[ 0.500348] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 11) *0, disabled.
[ 0.500459] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 *10 11)
[ 0.500687] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 0.500727] pnp: PnP ACPI init
[ 0.500740] ACPI: bus type pnp registered
[ 0.503213] pnp: PnP ACPI: found 8 devices
[ 0.503218] ACPI: ACPI bus type pnp unregistered
[ 0.503222] PnPBIOS: Disabled by ACPI PNP
[ 0.503632] PCI: Using ACPI for IRQ routing
[ 0.503770] NET: Registered protocol family 8
[ 0.503770] NET: Registered protocol family 20
[ 0.503770] NetLabel: Initializing
[ 0.503770] NetLabel: domain hash size = 128
[ 0.503770] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.503770] NetLabel: unlabeled traffic allowed by default
[ 0.504321] tracer: 772 pages allocated for 65536 entries of 48 bytes
[ 0.504324] actual entries 65620
[ 0.504513] AppArmor: AppArmor Filesystem Enabled
[ 0.504535] ACPI: RTC can wake from S4
[ 0.504629] system 00:04: ioport range 0x8000-0x807f has been reserved
[ 0.504632] system 00:04: ioport range 0x8080-0x80ff has been reserved
[ 0.504636] system 00:04: ioport range 0x8100-0x811f has been reserved
[ 0.504639] system 00:04: ioport range 0x4d0-0x4d1 has been reserved
[ 0.504643] system 00:04: ioport range 0x3f0-0x3f1 has been reserved
[ 0.504649] system 00:04: iomem range 0xfec00000-0xfecfffff has been reserved
[ 0.504652] system 00:04: iomem range 0xfed00000-0xfed003ff has been reserved
[ 0.504656] system 00:04: iomem range 0xfee00000-0xfeefffff has been reserved
[ 0.504659] system 00:04: iomem range 0xffc00000-0xffc00fff has been reserved
[ 0.504663] system 00:04: iomem range 0xffe00000-0xffe00fff has been reserved
[ 0.504667] system 00:04: iomem range 0xffe80000-0xffefffff has been reserved
[ 0.504671] system 00:04: iomem range 0xfffe0000-0xfffeffff could not be reserved
[ 0.504674] system 00:04: iomem range 0xffff0000-0xffffffff could not be reserved
[ 0.539928] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.539933] pci 0000:00:01.0: IO window: 0xa000-0xafff
[ 0.539938] pci 0000:00:01.0: MEM window: 0xe2100000-0xe21fffff
[ 0.539943] pci 0000:00:01.0: PREFETCH window: 0x000000e8000000-0x000000efffffff
[ 0.539949] pci 0000:00:06.0: CardBus bridge, secondary bus 0000:02
[ 0.539952] pci 0000:00:06.0: IO window: 0x002400-0x0024ff
[ 0.539956] pci 0000:00:06.0: IO window: 0x002800-0x0028ff
[ 0.539960] pci 0000:00:06.0: PREFETCH window: 0x50000000-0x53ffffff
[ 0.539964] pci 0000:00:06.0: MEM window: 0x54000000-0x57ffffff
[ 0.539981] pci 0000:00:06.0: enabling device (0000 -> 0003)
[ 0.539994] pci 0000:00:06.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 0.539999] bus: 00 index 0 io port: [0, ffff]
[ 0.540002] bus: 00 index 1 mmio: [0, ffffffff]
[ 0.540004] bus: 01 index 0 io port: [a000, afff]
[ 0.540007] bus: 01 index 1 mmio: [e2100000, e21fffff]
[ 0.540009] bus: 01 index 2 mmio: [e8000000, efffffff]
[ 0.540012] bus: 01 index 3 mmio: [0, 0]
[ 0.540014] bus: 02 index 0 io port: [2400, 24ff]
[ 0.540016] bus: 02 index 1 io port: [2800, 28ff]
[ 0.540019] bus: 02 index 2 mmio: [50000000, 53ffffff]
[ 0.540021] bus: 02 index 3 mmio: [54000000, 57ffffff]
[ 0.540045] NET: Registered protocol family 2
[ 0.540206] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.540579] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.541848] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.542456] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.542460] TCP reno registered
[ 0.542595] NET: Registered protocol family 1
[ 0.542745] checking if image is initramfs... it is
[ 1.040072] Switched to high resolution mode on CPU 0
[ 1.325758] Freeing initrd memory: 8001k freed
[ 1.325963] Simple Boot Flag at 0x38 set to 0x1
[ 1.326623] audit: initializing netlink socket (disabled)
[ 1.326647] type=2000 audit(1229187403.324:1): initialized
[ 1.333305] highmem bounce pool size: 64 pages
[ 1.333313] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 1.335822] VFS: Disk quotas dquot_6.5.1
[ 1.335941] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.336092] msgmni has been set to 1763
[ 1.336240] io scheduler noop registered
[ 1.336244] io scheduler anticipatory registered
[ 1.336246] io scheduler deadline registered
[ 1.336263] io scheduler cfq registered (default)
[ 1.754306] pci 0000:01:00.0: Boot video device
[ 1.754723] isapnp: Scanning for PnP cards...
[ 2.107949] isapnp: No Plug & Play device found
[ 2.176519] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[ 2.177636] serial 0000:00:02.6: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 2.177643] serial 0000:00:02.6: PCI INT C disabled
[ 2.179393] brd: module loaded
[ 2.179481] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 2.179622] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 2.183325] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.183334] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.183897] mice: PS/2 mouse device common for all mice
[ 2.184135] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 2.184163] rtc0: alarms up to one year, y3k
[ 2.184309] EISA: Probing bus 0 at eisa.0
[ 2.184317] Cannot allocate resource for EISA slot 1
[ 2.184320] Cannot allocate resource for EISA slot 2
[ 2.184339] Cannot allocate resource for EISA slot 8
[ 2.184341] EISA: Detected 0 cards.
[ 2.184345] cpuidle: using governor ladder
[ 2.184348] cpuidle: using governor menu
[ 2.184891] TCP cubic registered
[ 2.184926] Using IPI No-Shortcut mode
[ 2.185311] registered taskstats version 1
[ 2.185426] Magic number: 4:601:944
[ 2.185520] tty ptyyf: hash matches
[ 2.185565] tty tty1: hash matches
[ 2.185614] rtc_cmos 00:02: setting system clock to 2008-12-13 16:56:45 UTC (1229187405)
[ 2.185618] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 2.185620] EDD information not available.
[ 2.186077] Freeing unused kernel memory: 424k freed
[ 2.186145] Write protecting the kernel text: 2576k
[ 2.186187] Write protecting the kernel read-only data: 936k
[ 2.216340] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 2.422087] fuse init (API version 7.9)
[ 2.760808] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 2.764839] processor ACPI0007:00: registered as cooling_device0
[ 2.796673] thermal LNXTHERM:01: registered as thermal_zone0
[ 2.804460] Marking TSC unstable due to TSC halts in idle
[ 2.817362] ACPI: Thermal Zone [THRM] (23 C)
[ 3.410574] No dock devices found.
[ 3.472338] SCSI subsystem initialized
[ 3.566657] libata version 3.00 loaded.
[ 3.576751] usbcore: registered new interface driver usbfs
[ 3.576784] usbcore: registered new interface driver hub
[ 3.598908] usbcore: registered new device driver usb
[ 3.607350] sis900.c: v1.08.10 Apr. 2 2006
[ 3.607392] sis900 0000:00:04.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 3.612097] 0000:00:04.0: Realtek RTL8201 PHY transceiver found at address 13.
[ 3.617996] 0000:00:04.0: Using transceiver found at address 13 as default
[ 3.620975] eth0: SiS 900 PCI Fast Ethernet at 0x1800, IRQ 19, 00:c0:9f:b8:1e:6b
[ 3.624726] pata_sis 0000:00:02.5: version 0.5.2
[ 3.624747] pata_sis 0000:00:02.5: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 3.627735] scsi0 : pata_sis
[ 3.656504] scsi1 : pata_sis
[ 3.656730] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x2000 irq 14
[ 3.656734] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x2008 irq 15
[ 3.677461] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[ 3.820332] ata1.00: ATA-6: TOSHIBA MK8025GAS, KA023A, max UDMA/100
[ 3.820337] ata1.00: 156301488 sectors, multi 16: LBA
[ 3.828396] ata1.00: configured for UDMA/100
[ 3.992266] ata2.00: ATAPI: Slimtype DVDRW SOSW-833S, VRS2, max UDMA/33
[ 4.008309] ata2.00: configured for UDMA/33
[ 4.008449] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK8025GA KA02 PQ: 0 ANSI: 5
[ 4.009155] scsi 1:0:0:0: CD-ROM Slimtype DVDRW SOSW-833S VRS2 PQ: 0 ANSI: 5
[ 4.009426] ohci_hcd 0000:00:03.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 4.009441] ohci_hcd 0000:00:03.0: OHCI Host Controller
[ 4.009499] ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 1
[ 4.009524] ohci_hcd 0000:00:03.0: irq 20, io mem 0xe2002000
[ 4.064259] usb usb1: configuration #1 chosen from 1 choice
[ 4.064290] hub 1-0:1.0: USB hub found
[ 4.064303] hub 1-0:1.0: 3 ports detected
[ 4.168379] ohci_hcd 0000:00:03.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 4.168396] ohci_hcd 0000:00:03.1: OHCI Host Controller
[ 4.168425] ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 2
[ 4.168458] ohci_hcd 0000:00:03.1: irq 21, io mem 0xe2003000
[ 4.224263] usb usb2: configuration #1 chosen from 1 choice
[ 4.224296] hub 2-0:1.0: USB hub found
[ 4.224310] hub 2-0:1.0: 3 ports detected
[ 4.432325] ehci_hcd 0000:00:03.2: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[ 4.432343] ehci_hcd 0000:00:03.2: EHCI Host Controller
[ 4.432371] ehci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 3
[ 4.432404] ehci_hcd 0000:00:03.2: cache line size of 64 is not supported
[ 4.432421] ehci_hcd 0000:00:03.2: irq 23, io mem 0xe2004000
[ 4.444033] ehci_hcd 0000:00:03.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 4.444230] usb usb3: configuration #1 chosen from 1 choice
[ 4.444261] hub 3-0:1.0: USB hub found
[ 4.444275] hub 3-0:1.0: 6 ports detected
[ 4.656664] b43-pci-bridge 0000:00:0b.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 4.716075] ssb: Sonics Silicon Backplane found on PCI device 0000:00:0b.0
[ 4.730689] scsi 0:0:0:0: Attached scsi generic sg0 type 0
[ 4.730731] scsi 1:0:0:0: Attached scsi generic sg1 type 5
[ 4.813458] Driver 'sd' needs updating - please use bus_type methods
[ 4.813581] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
[ 4.813603] sd 0:0:0:0: [sda] Write Protect is off
[ 4.813606] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.813636] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.813712] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
[ 4.813729] sd 0:0:0:0: [sda] Write Protect is off
[ 4.813731] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.813761] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.813767] sda:<4>Driver 'sr' needs updating - please use bus_type methods
[ 4.877618] sda1 < sda5 > sda2
[ 4.878643] sd 0:0:0:0: [sda] Attached SCSI disk
[ 4.889730] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[ 4.889737] Uniform CD-ROM driver Revision: 3.20
[ 4.889860] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 5.016176] usb 2-2: new low speed USB device using ohci_hcd and address 2
[ 5.234457] usb 2-2: configuration #1 chosen from 1 choice
[ 5.257137] usbcore: registered new interface driver hiddev
[ 5.263568] input: Logitech Optical USB Mouse as /devices/pci0000:00/0000:00:03.1/usb2/2-2/2-2:1.0/input/input2
[ 5.263785] input,hidraw0: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:03.1-2
[ 5.263811] usbcore: registered new interface driver usbhid
[ 5.263815] usbhid: v2.6:USB HID core driver
[ 5.379427] kjournald starting. Commit interval 5 seconds
[ 5.379446] EXT3-fs: mounted filesystem with ordered data mode.
[ 12.957455] udevd version 124 started
[ 13.524838] Linux agpgart interface v0.103
[ 13.571011] agpgart-amd64 0000:00:00.0: AGP bridge [1039/0760]
[ 13.572889] agpgart-amd64 0000:00:00.0: AGP aperture is 32M @ 0xe0000000
[ 13.644841] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 13.697268] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 13.989788] sis96x_smbus 0000:00:02.1: SiS96x SMBus base address: 0x8100
[ 14.130595] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 14.144047] ACPI: Power Button (FF) [PWRF]
[ 14.144260] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input4
[ 14.146107] ACPI: Lid Switch [LID]
[ 14.146233] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input5
[ 14.160093] ACPI: Power Button (CM) [PWRB]
[ 14.160196] input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input6
[ 14.176041] ACPI: Sleep Button (CM) [SLPB]
[ 14.177788] ACPI: AC Adapter [ACAD] (on-line)
[ 14.387041] ACPI: Battery Slot [BAT1] (battery present)
[ 14.546891] Yenta: CardBus bridge found at 0000:00:06.0 [1025:0083]
[ 14.546908] Yenta: Using CSCINT to route CSC interrupts to PCI
[ 14.546911] Yenta: Routing CardBus interrupts to PCI
[ 14.546916] Yenta TI: socket 0000:00:06.0, mfunc 0x00521d22, devctl 0x64
[ 14.776779] Yenta: ISA IRQ mask 0x06f8, PCI irq 19
[ 14.776783] Socket status: 30000006
[ 15.531527] Intel ICH 0000:00:02.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 16.170697] b43-phy0: Broadcom 4318 WLAN found
[ 16.218174] input: PC Speaker as /devices/platform/pcspkr/input/input7
[ 16.246749] phy0: Selected rate control algorithm 'pid'
[ 16.356034] intel8x0_measure_ac97_clock: measured 55434 usecs
[ 16.356038] intel8x0: clocking to 48000
[ 16.462648] Broadcom 43xx driver loaded [ Features: PLR, Firmware-ID: FW13 ]
[ 16.519655] ACPI: WMI: Mapper loaded
[ 16.552488] acer-wmi: Acer Laptop ACPI-WMI Extras
[ 16.552504] acer-wmi: No or unsupported WMI interface, unable to load
[ 16.825719] Synaptics Touchpad, model: 1, fw: 5.9, id: 0x126eb1, caps: 0xa04713/0x4000
[ 16.859864] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8
[ 18.415519] cs: IO port probe 0x100-0x3af: clean.
[ 18.417171] cs: IO port probe 0x3e0-0x4ff: excluding 0x480-0x48f
[ 18.417833] cs: IO port probe 0x820-0x8ff: clean.
[ 18.418407] cs: IO port probe 0xc00-0xcf7: clean.
[ 18.419135] cs: IO port probe 0xa00-0xaff: clean.
[ 18.968050] lp: driver loaded but no devices found
[ 19.814727] EXT3 FS on sda5, internal journal
[ 21.187906] type=1505 audit(1229183824.391:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=3814
[ 21.420895] type=1505 audit(1229183824.627:3): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=3819
[ 21.421241] type=1505 audit(1229183824.627:4): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=3819
[ 21.634374] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 22.772404] powernow-k8: Found 1 Mobile AMD Sempron(tm) Processor 3000+ processors (1 cpu cores) (version 2.20.00)
[ 22.772447] powernow-k8: 0 : fid 0xa (1800 MHz), vid 0xa
[ 22.772450] powernow-k8: 1 : fid 0x8 (1600 MHz), vid 0xc
[ 22.772453] powernow-k8: 2 : fid 0x0 (800 MHz), vid 0x13
[ 23.631154] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use)
[ 23.735253] apm: BIOS not found.
[ 23.908991] ppdev: user-space parallel port driver
[ 26.036034] Clocksource tsc unstable (delta = -183546038 ns)
[ 26.437272] NET: Registered protocol family 10
[ 26.440568] lo: Disabled Privacy Extensions
[ 28.137589] Bluetooth: Core ver 2.13
[ 28.141016] NET: Registered protocol family 31
[ 28.141030] Bluetooth: HCI device and connection manager initialized
[ 28.141038] Bluetooth: HCI socket layer initialized
[ 28.194873] Bluetooth: L2CAP ver 2.11
[ 28.194888] Bluetooth: L2CAP socket layer initialized
[ 28.236310] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 28.236325] Bluetooth: BNEP filters: protocol multicast
[ 28.334967] Bluetooth: RFCOMM socket layer initialized
[ 28.335461] Bluetooth: RFCOMM TTY layer initialized
[ 28.335476] Bluetooth: RFCOMM ver 1.10
[ 28.346886] Bridge firewalling registered
[ 28.347651] pan0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.
[ 28.415293] Bluetooth: SCO (Voice Link) ver 0.6
[ 28.415307] Bluetooth: SCO socket layer initialized
[ 32.553413] eth0: Media Link Off
[ 32.554005] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 32.648268] input: b43-phy0 as /devices/virtual/input/input9
[ 32.756064] firmware: requesting b43/ucode5.fw
[ 32.857744] firmware: requesting b43/pcm5.fw
[ 32.862390] firmware: requesting b43/b0g0initvals5.fw
[ 32.872095] firmware: requesting b43/b0g0bsinitvals5.fw
[ 33.091081] b43-phy0: Loading firmware version 351.126 (2006-07-29 05:54:02)
[ 33.091097] b43-phy0 warning: You are using an old firmware image. Support for old firmware will be removed in July 2008.
[ 33.091102] b43-phy0 warning: You must go to http://linuxwireless.org/en/users/Drivers/b43#devicefirmware and download the latest firmware (version 4).
[ 33.208486] Registered led device: b43-phy0::tx
[ 33.210505] Registered led device: b43-phy0::rx
[ 33.211302] Registered led device: b43-phy0::radio
[ 33.260369] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 33.377382] NET: Registered protocol family 17
[ 65.640698] wlan0: authenticate with AP 00:17:9a:d4:72:20
[ 65.642508] wlan0: authenticated
[ 65.642528] wlan0: associate with AP 00:17:9a:d4:72:20
[ 65.645195] wlan0: RX AssocResp from 00:17:9a:d4:72:20 (capab=0x471 status=0 aid=1)
[ 65.645211] wlan0: associated
[ 65.645926] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 75.728025] wlan0: no IPv6 routers present
[ 84.458428] APIC error on CPU0: 00(40)
[ 104.598991] APIC error on CPU0: 40(40)
[ 106.057055] APIC error on CPU0: 40(40)
[ 106.067559] APIC error on CPU0: 40(40)
[ 106.930833] APIC error on CPU0: 40(40)
[ 107.179767] APIC error on CPU0: 40(40)
[ 108.649063] APIC error on CPU0: 40(40)
[ 114.759421] APIC error on CPU0: 40(40)
[ 117.501536] APIC error on CPU0: 40(40)
[ 117.599355] APIC error on CPU0: 40(40)
[ 117.931184] APIC error on CPU0: 40(40)
[ 118.113091] APIC error on CPU0: 40(40)
[ 118.217319] APIC error on CPU0: 40(40)
[ 119.992962] APIC error on CPU0: 40(40)
[ 122.351466] APIC error on CPU0: 40(40)
[ 185.335915] APIC error on CPU0: 40(40)
[ 188.275655] APIC error on CPU0: 40(40)
[ 220.194652] APIC error on CPU0: 40(40)
[ 235.100712] APIC error on CPU0: 40(40)
[ 345.655512] APIC error on CPU0: 40(40)
[ 365.467041] APIC error on CPU0: 40(40)
[ 468.459316] APIC error on CPU0: 40(40)
[ 517.645203] Intel ICH Modem 0000:00:02.6: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 534.731338] APIC error on CPU0: 40(40)
[ 535.840016] APIC error on CPU0: 40(40)
[ 541.814281] APIC error on CPU0: 40(40)
[ 542.953373] APIC error on CPU0: 40(40)
[ 545.987090] APIC error on CPU0: 40(40)
[ 564.886158] APIC error on CPU0: 40(40)
[ 565.809810] APIC error on CPU0: 40(40)
[ 601.990953] APIC error on CPU0: 40(40)
[ 611.222945] APIC error on CPU0: 40(40)
[ 620.919017] APIC error on CPU0: 40(40)
[ 621.536050] APIC error on CPU0: 40(40)
[ 621.938754] APIC error on CPU0: 40(40)
[ 624.782227] APIC error on CPU0: 40(40)
[ 624.995746] APIC error on CPU0: 40(40)
[ 631.639847] APIC error on CPU0: 40(40)
[ 631.849580] APIC error on CPU0: 40(40)
[ 632.064479] APIC error on CPU0: 40(40)
[ 632.278586] APIC error on CPU0: 40(40)
[ 639.965886] APIC error on CPU0: 40(40)
[ 646.931140] APIC error on CPU0: 40(40)
[ 646.931289] APIC error on CPU0: 40(40)
[ 647.945293] APIC error on CPU0: 40(40)
[ 648.142691] APIC error on CPU0: 40(40)
[ 672.940107] APIC error on CPU0: 40(40)
[ 673.362736] APIC error on CPU0: 40(40)
[ 676.264239] APIC error on CPU0: 40(40)
[ 784.685151] Intel ICH Modem 0000:00:02.6: PCI INT C disabled
[ 784.992463] Intel ICH Modem 0000:00:02.6: PCI INT C -> GSI 18 (level, low) -> IRQ 18
Module Size Used by
snd_atiixp_modem 20360 0
snd_via82xx_modem 19464 0
snd_intel8x0m 22412 5
ungrab_winmodem 10112 0
af_packet 25728 4
binfmt_misc 16904 1
rfkill_input 12672 0
sco 18308 2
bridge 56980 0
rfcomm 44432 0
stp 10628 1 bridge
bnep 20480 2
l2cap 30464 6 rfcomm,bnep
bluetooth 61924 6 sco,rfcomm,bnep,l2cap
ipv6 263972 12
ppdev 15620 0
powernow_k8 22148 0
cpufreq_stats 13188 0
cpufreq_powersave 9856 0
cpufreq_userspace 11396 0
cpufreq_conservative 14600 0
cpufreq_ondemand 14988 1
freq_table 12672 3 powernow_k8,cpufreq_stats,cpufreq_ondemand
video 25104 0
output 11008 1 video
pci_slot 12552 0
container 11520 0
sbs 19464 0
sbshc 13440 1 sbs
iptable_filter 10752 0
ip_tables 19600 1 iptable_filter
x_tables 22916 1 ip_tables
parport_pc 39204 0
lp 17156 0
parport 42604 3 ppdev,parport_pc,lp
joydev 18368 0
pcmcia 43052 0
wmi 14504 0
arc4 9984 2
ecb 10880 2
crypto_blkcipher 25476 1 ecb
serio_raw 13444 0
psmouse 45200 0
pcspkr 10624 0
b43 131356 0
rfkill 17176 3 rfkill_input,b43
evdev 17696 10
mac80211 216820 1 b43
k8temp 12416 0
cfg80211 32392 1 mac80211
led_class 12164 1 b43
input_polldev 11912 1 b43
snd_intel8x0 37532 3
snd_ac97_codec 111652 4 snd_atiixp_modem,snd_via82xx_modem,snd_intel8x0m,snd_intel8x0
ac97_bus 9856 1 snd_ac97_codec
snd_pcm_oss 46848 0
snd_mixer_oss 22784 1 snd_pcm_oss
snd_pcm 83204 8 snd_atiixp_modem,snd_via82xx_modem,snd_intel8x0m,snd_intel8x0,snd_ac97_codec,snd_pcm_oss
snd_seq_dummy 10884 0
snd_seq_oss 38528 0
snd_seq_midi 14336 0
snd_rawmidi 29824 1 snd_seq_midi
snd_seq_midi_event 15232 2 snd_seq_oss,snd_seq_midi
yenta_socket 31756 1
rsrc_nonstatic 19072 1 yenta_socket
snd_seq 57776 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
pcmcia_core 43412 3 pcmcia,yenta_socket,rsrc_nonstatic
snd_timer 29960 2 snd_pcm,snd_seq
snd_seq_device 15116 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
battery 18436 0
snd 63268 27 snd_atiixp_modem,snd_via82xx_modem,snd_intel8x0m,snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
ac 12292 0
button 14224 0
soundcore 15328 1 snd
i2c_sis96x 12420 0
snd_page_alloc 16136 5 snd_atiixp_modem,snd_via82xx_modem,snd_intel8x0m,snd_intel8x0,snd_pcm
i2c_core 31892 1 i2c_sis96x
sis_agp 15232 0
shpchp 37908 0
pci_hotplug 35236 1 shpchp
amd64_agp 18184 1
agpgart 42184 2 sis_agp,amd64_agp
ext3 133384 1
jbd 55444 1 ext3
mbcache 16004 1 ext3
usbhid 35840 0
hid 50560 1 usbhid
sr_mod 22212 0
cdrom 43168 1 sr_mod
sd_mod 42264 2
crc_t10dif 9984 1 sd_mod
sg 39732 0
pata_acpi 12160 0
ohci_hcd 31888 0
ssb 40580 1 b43
ehci_hcd 43276 0
pata_sis 18436 1
ata_generic 12932 0
sis900 27904 0
mii 13440 1 sis900
usbcore 148848 4 usbhid,ohci_hcd,ehci_hcd
libata 177312 3 pata_acpi,pata_sis,ata_generic
scsi_mod 155212 4 sr_mod,sd_mod,sg,libata
dock 16656 1 libata
thermal 23708 0
processor 42156 3 powernow_k8,thermal
fan 12548 0
fbcon 47648 0
tileblit 10880 1 fbcon
font 16512 1 fbcon
bitblit 13824 1 fbcon
softcursor 9984 1 bitblit
fuse 60828 3
