Antonio, USA Slax kernel 2.6.27.8

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Dear all,

I am running Slax to access the smartlink modem

Have a slax module ready

http://www.slax.org/modules.php?action=detail&id=1037

Have fedora 10 x86_64 installed, but modem not available unless I boot
a 32 bit kernel, but I am having troubles with Fedora freezing so Slax
is my lifesaver.

Just FYI.

Regards,

Antonio
 Only plain text email is forwarded by the  Discuss@xxxxxxxxxxxxx List Server,
 as HTML can contain viruses. Use as the email Subject Line:
           YourName, YourCountry  kernel 2.6.27.8 
 With this Subject Line cogent experts will be alerted, and useful case names left in the Archive.
 YourCountry will enable Country specific guidance. Linux experts in YourCountry 
 can be found through: http://www.linux.org/groups/index.html.
They will know your Country's modem code, which may be essential for dialup service.
Responses from Discuss@xxxxxxxxxxxxx are sometimes blocked by an Internet Provider mail filters.
 So in a day, also check the Archived responses at http://www.linmodems.org 
--------------------------  System information ----------------------------
CPU=i686,  
Linux version 2.6.27.8 (root@darkstar) (gcc version 4.2.4) #1 SMP Sun Dec 7 08:30:31 Local time zone must be set--see zic m
 scanModem update of:  2008_11_06

The slmodemd set symbolic link is /dev/ttySL0 -> /dev/pts/0
Modem drivers blocked from loading during bootup are listed in /etc/modprobe* file lines:
/etc/modprobe.d/blacklist:blacklist snd-atiixp-modem
/etc/modprobe.d/blacklist:blacklist snd-via82xx-modem
/etc/modprobe.d/blacklist:blacklist snd-intel8x0m

Attached USB devices are:
 ID 067b:2303 Prolific Technology, Inc. PL2303 Serial Port
 ID 1d6b:0001 Linux Foundation 1.1 root hub
 ID 1d6b:0002 Linux Foundation 2.0 root hub
 ID 1d6b:0001 Linux Foundation 1.1 root hub
 ID 1d6b:0001 Linux Foundation 1.1 root hub
 ID 1d6b:0001 Linux Foundation 1.1 root hub
 ID 1d6b:0001 Linux Foundation 1.1 root hub

USB modems not recognized

For candidate card in slot 03:06.0, firmware information and bootup diagnostics are:
 PCI slot	PCI ID		SubsystemID	Name
 ----------	---------	---------	--------------
 03:06.0	163c:3052	163c:3052	Modem: Smart Link Ltd. SmartLink SmartPCI562 56K Modem 

 Modem interrupt assignment and sharing: 
 21:      11902     461336   IO-APIC-fasteoi   SL1900
 --- Bootup diagnostics for card in PCI slot 03:06.0 ----
PCI: 0000:03:06.0 reg 10 32bit mmio: [fdeff000, fdefffff]
PCI: 0000:03:06.0 reg 14 io port: [ce00, ceff]
pci 0000:03:06.0: PME# supported from D0 D3hot D3cold
pci 0000:03:06.0: PME# disabled
serial 0000:03:06.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
0000:03:06.0: ttyS1 at I/O 0xce08 (irq = 21) is a 16450
0000:03:06.0: ttyS2 at I/O 0xce10 (irq = 21) is a 8250
0000:03:06.0: ttyS3 at I/O 0xce18 (irq = 21) is a 16450
Couldn't register serial port 0000:03:06.0: -28
serial 0000:03:06.0: PCI INT A disabled
slamr 0000:03:06.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21

 The PCI slot 03:06.0 of the modem card may be disabled early in 
 a bootup process,  but then enabled later. If modem drivers load 
 but the  modem is not responsive, read DOCs/Bootup.txt about possible fixes.
 Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx
 if help is needed.
 

For candidate card in slot 00:14.2, firmware information and bootup diagnostics are:
 PCI slot	PCI ID		SubsystemID	Name
 ----------	---------	---------	--------------
 00:14.2	1002:4383	1043:8249	Audio device: ATI Technologies Inc SBx00 Azalia 

 Modem interrupt assignment and sharing: 
 16:       1034          2   IO-APIC-fasteoi   ohci_hcd:usb2, HDA Intel
 --- Bootup diagnostics for card in PCI slot 00:14.2 ----
PCI: 0000:00:14.2 reg 10 64bit mmio: [fe020000, fe023fff]
pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.2: PME# disabled
HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16

 The PCI slot 00:14.2 of the modem card may be disabled early in 
 a bootup process,  but then enabled later. If modem drivers load 
 but the  modem is not responsive, read DOCs/Bootup.txt about possible fixes.
 Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx
 if help is needed.
 


===== Advanced Linux Sound Architecture (ALSA) diagnostics ===== 
The ALSA packages provide audio support and also drivers for some modems.
ALSA diagnostics are written during bootup to /proc/asound/ folders.

The ALSA verion is 1.0.17
The modem cards detected by "aplay -l"  are: None


The /proc/asound/pcm file reports:
-----------------------
00-02: ALC883 Analog : ALC883 Analog : capture 1
00-01: ALC883 Digital : ALC883 Digital : playback 1 : capture 1
00-00: ALC883 Analog : ALC883 Analog : playback 1 : capture 1

about /proc/asound/cards:
------------------------
 0 [SB             ]: HDA-Intel - HDA ATI SB
                      HDA ATI SB at 0xfe020000 irq 16

 PCI slot 00:14.2 has a High Definition Audio Card
 The drivers are in the kernel modules tree at:
 /lib/modules/2.6.27.8/kernel/sound/pci/hda/snd-hda-intel.ko
=== Finished firmware and bootup diagnostics, next deducing cogent software. ===

Predictive  diagnostics for card in bus 03:06.0:
	Modem chipset  detected on
NAME="Modem: Smart Link Ltd. SmartLink SmartPCI562 56K Modem "
CLASS=0703
PCIDEV=163c:3052
SUBSYS=163c:3052
IRQ=21
IDENT=slamr

 For candidate modem in:  03:06.0
   0703 Modem: Smart Link Ltd. SmartLink SmartPCI562 56K Modem 
      Primary device ID:  163c:3052
 Support type needed or chipset:	slamr
 

----------------end Softmodem section --------------
The modem is supported by the Smartlink 
plus the slmodemd helper utility.  Read the
DOCs/Smartlink.txt and Modem/DOCs/YourSystem.txt for follow through guidance.


For 2.6.27.8 compiling drivers is necessary. As of October 2007 the current packages at
http://linmodems.technion.ac.il/packages/smartlink/  are the
ungrab-winmodem-20070505.tar.gz and slmodem-2.9.11-20080126.tar.gz

Writing DOCs/Smartlink.txt
============ end Smartlink section =====================


Predictive  diagnostics for card in bus 00:14.2:
	Modem chipset not detected on
NAME="Audio device: ATI Technologies Inc SBx00 Azalia "
CLASS=0403
PCIDEV=1002:4383
SUBSYS=1043:8249
IRQ=16
HDA=1002:4383
SOFT=1002:4383.HDA


 High Definition Audio (HDA) cards MAY host a modem chip in their Subsystem, 
 and many are supported by the ALSA audio+modem driver snd-hda-intel
 A modem was not detected on HDA card 1002:4383.
 If another modem card is present, then most likely 1002:4383 does not host a modem.
 If another modem card has not been detected, then possibilities are:
	1) A Conexant modem chip is present on 1002:4383, as Conexant chips
 are frequently not detectable by ALSA diagnostics
	2) The modem may be of the older non-PCI Controller Chipset (hardware) type.
Try detection with Root permission:
	 wvdialconf  /etc/wvdial.conf

 For candidate modem in:  00:14.2
   0403 Audio device: ATI Technologies Inc SBx00 Azalia 
      Primary device ID:  1002:4383
    Subsystem PCI_id  1043:8249 
    Softmodem codec or chipset from diagnostics: 
                               from    Archives: 
                        
      

Support type needed or chipset:	

Support can likely be achieved through two mutually exclusive alternatives:
1) The hsfmodem software for Conexant chipset modems: Read DOCs/Conexant.txt
The following ALSA alternative CANNOT work with Conexant modems.

2) An ALSA modem driver plus slmodemd.  Read DOCs/Smartlink.txt for details, and
to test get the package SLMODEMD.gcc4.2.tar.gz from:  
	http://linmodems.technion.ac.il/packages/smartlink/

----------------end Softmodem section --------------

 Completed candidate modem analyses.

 The base of the UDEV device file system is: /dev/.udev

 Versions adequately match for the compiler installed: 4.2.4
             and the compiler used in kernel assembly: 4.2.4


 
 Minimal compiling resources appear complete:
   make utility - /usr/bin/make
   Compiler version 4.2
   linuc_headers base folder /lib/modules/2.6.27.8/build

 However some compilations and executable functions may need additional files,
 in the FileNames.h (so called kernel "h"eaders) collection installed in  /usr/include/ .
 For martian_modem, additional required packages are needed. The also required headers of package libc6 are commonly installed by default. 
 Compiling hsfmodem drivers does require linux-libc-dev and libc6-dev packages, for kernels 2.6.24 and later versions.
 In not included on your install CD, search for them at http://packages.ubuntu.com
 or comparable Repository for other Linux distros.
 When compiling ALSA drivers, the utility "patch" will also be needed.




If a driver compilation fails, with message including some lack of some FileName.h (stdio.h for example), then
Some additional kernel-header files need installation to /usr/include. The minimal additional packages are libc6-dev
and any of its dependents, under Ubuntu linux-libc-dev

If an alternate ethernet connection is available,
$  apt-get update
$  apt-get -s install linux-kernel-devel
will install needed packages.
For Debian/Ubuntu related distributions, run the following command to display the needed package list:

Otherwise packages have to be found through http://packages.ubuntu.com
Once downloaded and transferred into a Linux partition,
they can be installed alltogether with:
$ sudo dpkg -i *.deb


Checking pppd properties:
	-rwxr-xr-x 1 root root 366440 Jun 29  2006 /usr/sbin/pppd

In case of an "error 17" "serial loopback" problem, see:
    http://linmodems.technion.ac.il/linmodems/archive-sixth/msg02637.html

To enable dialout without Root permission do:
	$ su - root  (not for Ubuntu)
         chmod a+x /usr/sbin/pppd
or under Ubuntu related Linuxes
	 chmod a+x /usr/sbin/pppd

Checking settings of:	/etc/ppp/options
asyncmap 0
crtscts
lock
modem
proxyarp
lcp-echo-interval 30
lcp-echo-failure 4

In case of a message like:
   Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html

Read Modem/DOCs/YourSystem.txt concerning other COMM channels: eth0 ppp0
Which can interfere with Browser naviagation.

 Don't worry about the following, it is for experts should trouble shooting be necessary.
==========================================================

 Checking for modem support lines:
 --------------------------------------
     /device/modem symbolic link:   
slmodemd created symbolic link /dev/ttySL0:  lrwxrwxrwx 1 root root 10 Dec 13 12:56 /dev/ttySL0 -> /dev/pts/0
     Within /etc/udev/ files:

     Within /etc/modprobe.conf files:
/etc/modprobe.d/blacklist:# ALSA modules to support sound modems.  These should be loaded manually
/etc/modprobe.d/blacklist:blacklist snd-atiixp-modem
/etc/modprobe.d/blacklist:blacklist snd-via82xx-modem
     Within any ancient /etc/devfs files:

     Within ancient kernel 2.4.n /etc/module.conf files:

--------- end modem support lines --------


[Index of Archives]     [Linux Media Development]     [Asterisk]     [DCCP]     [Netdev]     [X.org]     [Xfree86]     [Fedora Women]     [Linux USB]

  Powered by Linux