Identifying PCI bus slots with candidate modems.
Running PCIbus cases
Analysing card in PCI bus 00:1f.6, writing to scanout.00:1f.6
Using scanout.00:1f.6 data, and writing guidance to ModemData.txt
Writing DOCs/Intel.txt
Writing DOCs/Smartlink.txt
Writing residual guidance customized to your System.
A subfolder Modem/ has been written, containing these files with
more detailed Information:
------------------------------------------------------------------------------------------
1stRead.txt Bootup.txt dmesg.txt DOCs ModemData.txt
scanout.00:1f.6 tmp
and in the DOCs subfolder:
DriverCompiling.txt InfoGeneral.txt Intel.txt Rational.txt
Smartlink.txt SoftModem.txt Testing.txt UNSUBSCRIBE.txt
wvdial.txt YourSystem.txt
-------------------------------------------------------------------------------------------
Please read 1stRead.txt first for Guidance.
Module Size Used by
nls_iso8859_1 4992 1
nls_cp437 6656 1
vfat 14464 1
fat 54556 1 vfat
usb_storage 73664 1
libusual 19108 1 usb_storage
snd_rtctimer 4640 1
i915 32512 2
drm 82452 3 i915
rfcomm 41744 2
l2cap 25728 13 rfcomm
bluetooth 61156 4 rfcomm,l2cap
rfkill_input 5760 0
ppdev 10372 0
speedstep_ich 6288 0
speedstep_lib 6532 1 speedstep_ich
cpufreq_ondemand 9740 1
cpufreq_userspace 5284 0
cpufreq_conservative 8712 0
cpufreq_powersave 2688 0
cpufreq_stats 7104 0
freq_table 5536 3 speedstep_ich,cpufreq_ondemand,cpufreq_stats
sbs 15112 0
sbshc 7680 1 sbs
dock 11280 0
container 5632 0
ipv6 267780 14
ppp_generic 29588 0
slhc 7040 1 ppp_generic
iptable_filter 3840 0
ip_tables 14820 1 iptable_filter
x_tables 16132 1 ip_tables
parport_pc 36260 0
lp 12324 0
parport 37832 3 ppdev,parport_pc,lp
pcmcia 40876 0
af_packet 23812 8
joydev 13120 0
arc4 2944 2
ecb 4480 2
snd_intel8x0 35356 3
blkcipher 8324 1 ecb
snd_ac97_codec 101028 1 snd_intel8x0
ac97_bus 3072 1 snd_ac97_codec
snd_pcm_oss 42144 0
snd_pcm 78596 3 snd_intel8x0,snd_ac97_codec,snd_pcm_oss
b43 144548 0
snd_mixer_oss 17920 1 snd_pcm_oss
rfkill 8596 3 rfkill_input,b43
mac80211 165652 1 b43
snd_seq_dummy 4868 0
cfg80211 15112 1 mac80211
snd_seq_oss 35584 0
led_class 6020 1 b43
input_polldev 5896 1 b43
snd_seq_midi 9376 0
yenta_socket 27276 1
rsrc_nonstatic 13696 1 yenta_socket
pcmcia_core 40596 3 pcmcia,yenta_socket,rsrc_nonstatic
snd_rawmidi 25760 1 snd_seq_midi
snd_seq_midi_event 8320 2 snd_seq_oss,snd_seq_midi
snd_seq 54224 7 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
snd_timer 24836 3 snd_rtctimer,snd_pcm,snd_seq
snd_seq_device 9612 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
snd 56996 19 snd_rtctimer,snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_pcm,snd_mixer_oss,snd_seq_dummy,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
iTCO_wdt 13092 0
iTCO_vendor_support 4868 1 iTCO_wdt
video 19856 0
output 4736 1 video
serio_raw 7940 0
intel_agp 25492 1
button 9232 0
soundcore 8800 1 snd
battery 14212 0
ac 6916 0
hsfmc97ich 72252 0
hsfserial 24740 1 hsfmc97ich
shpchp 34452 0
pci_hotplug 30880 1 shpchp
dcdbas 9504 0
agpgart 34760 3 drm,intel_agp
snd_page_alloc 11400 2 snd_intel8x0,snd_pcm
hsfengine 1264192 2 hsfmc97ich,hsfserial
hsfosspec 106088 3 hsfmc97ich,hsfserial,hsfengine
hsfsoar 94680 1 hsfmc97ich
evdev 13056 8
pcspkr 4224 0
psmouse 40336 0
ext3 136840 1
jbd 48404 1 ext3
mbcache 9600 1 ext3
sg 36880 0
sd_mod 30720 5
sr_mod 17956 0
cdrom 37408 1 sr_mod
pata_acpi 8320 0
ata_generic 8324 0
b44 28432 0
ata_piix 19588 2
ssb 34308 2 b43,b44
libata 159344 3 pata_acpi,ata_generic,ata_piix
ehci_hcd 37900 0
mii 6400 1 b44
uhci_hcd 27024 0
scsi_mod 151436 5 usb_storage,sg,sd_mod,sr_mod,libata
usbcore 146412 6 usb_storage,libusual,hsfosspec,ehci_hcd,uhci_hcd
thermal 16796 0
processor 37384 2 thermal
fan 5636 0
fbcon 42912 0
tileblit 3456 1 fbcon
font 9472 1 fbcon
bitblit 6784 1 fbcon
softcursor 3072 1 bitblit
fuse 50708 3
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.24-21-generic (buildd@palmer) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Tue Oct 21 23:43:45 UTC 2008 (Ubuntu 2.6.24-21.43-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
[ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000002fec9000 (usable)
[ 0.000000] BIOS-e820: 000000002fec9000 - 0000000030000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec10000 - 00000000fec20000 (reserved)
[ 0.000000] BIOS-e820: 00000000feda0000 - 00000000fee00000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 766MB LOWMEM available.
[ 0.000000] Entering add_active_range(0, 0, 196297) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 196297
[ 0.000000] HighMem 196297 -> 196297
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 196297
[ 0.000000] On node 0 totalpages: 196297
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1501 pages used for memmap
[ 0.000000] Normal zone: 190700 pages, LIFO batch:31
[ 0.000000] HighMem zone: 0 pages used for memmap
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] DMI 2.3 present.
[ 0.000000] ACPI: RSDP signature @ 0xC00FDF00 checksum 0
[ 0.000000] ACPI: RSDP 000FDF00, 0014 (r0 DELL )
[ 0.000000] ACPI: RSDT 2FEF0000, 0028 (r1 DELL CPi R 27D4061D ASL 61)
[ 0.000000] ACPI: FACP 2FEF0400, 0074 (r1 DELL CPi R 27D4061D ASL 61)
[ 0.000000] ACPI: DSDT 2FEF0C00, 2586 (r1 INT430 SYSFexxx 1001 MSFT 100000E)
[ 0.000000] ACPI: FACS 2FEFF800, 0040
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] Allocating PCI resources starting at 40000000 (gap: 30000000:cec10000)
[ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 0000000000100000
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 194764
[ 0.000000] Kernel command line: root=UUID=d9a7ba9a-c5d2-4ebd-a8b7-114874b30b0b ro pollirq quiet splash
[ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic"
[ 0.000000] mapped APIC to ffffb000 (0160e000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Detected 1598.721 MHz processor.
[ 11.676903] Console: colour VGA+ 80x25
[ 11.676909] console [tty0] enabled
[ 11.677638] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 11.678407] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 11.701215] Memory: 766212k/785188k available (2177k kernel code, 18428k reserved, 1005k data, 368k init, 0k highmem)
[ 11.701228] virtual kernel memory layout:
[ 11.701230] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB)
[ 11.701232] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 11.701233] vmalloc : 0xf0800000 - 0xff7fe000 ( 239 MB)
[ 11.701235] lowmem : 0xc0000000 - 0xefec9000 ( 766 MB)
[ 11.701237] .init : 0xc0421000 - 0xc047d000 ( 368 kB)
[ 11.701238] .data : 0xc03205e4 - 0xc041bdc4 (1005 kB)
[ 11.701240] .text : 0xc0100000 - 0xc03205e4 (2177 kB)
[ 11.701245] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 11.701301] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
[ 11.781265] Calibrating delay using timer specific routine.. 3200.95 BogoMIPS (lpj=6401902)
[ 11.781304] Security Framework initialized
[ 11.781314] SELinux: Disabled at boot.
[ 11.781337] AppArmor: AppArmor initialized
[ 11.781344] Failure registering capabilities with primary security module.
[ 11.781358] Mount-cache hash table entries: 512
[ 11.781565] Initializing cgroup subsys ns
[ 11.781571] Initializing cgroup subsys cpuacct
[ 11.781589] CPU: After generic identify, caps: bfebf9ff 00000000 00000000 00000000 00004400 00000000 00000000 00000000
[ 11.781611] CPU: Trace cache: 12K uops, L1 D cache: 8K
[ 11.781616] CPU: L2 cache: 512K
[ 11.781620] CPU: Hyper-Threading is disabled
[ 11.781624] CPU: After all inits, caps: bfebf9ff 00000000 00000000 00043080 00004400 00000000 00000000 00000000
[ 11.781644] Compat vDSO mapped to ffffe000.
[ 11.781664] Checking 'hlt' instruction... OK.
[ 11.797823] SMP alternatives: switching to UP code
[ 11.800222] Freeing SMP alternatives: 11k freed
[ 11.800425] Early unpacking initramfs... done
[ 12.322533] ACPI: Core revision 20070126
[ 12.322611] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[ 12.324390] ACPI: setting ELCR to 0200 (from 0800)
[ 12.325958] CPU0: Intel Mobile Intel(R) Pentium(R) 4 CPU 2.80GHz stepping 09
[ 12.325970] SMP motherboard not detected.
[ 12.325974] Local APIC not detected. Using dummy APIC emulation.
[ 12.326049] Brought up 1 CPUs
[ 12.326078] CPU0 attaching sched-domain:
[ 12.326083] domain 0: span 01
[ 12.326086] groups: 01
[ 12.326397] net_namespace: 64 bytes
[ 12.326419] Booting paravirtualized kernel on bare hardware
[ 12.327293] Time: 20:16:15 Date: 11/16/08
[ 12.327337] NET: Registered protocol family 16
[ 12.327715] EISA bus registered
[ 12.327735] ACPI: bus type pci registered
[ 12.377317] PCI: PCI BIOS revision 2.10 entry at 0xfcfae, last bus=2
[ 12.377322] PCI: Using configuration type 1
[ 12.377354] Setting up standard PCI resources
[ 12.380088] ACPI: EC: Look up EC in DSDT
[ 12.384206] ACPI: Interpreter enabled
[ 12.384212] ACPI: (supports S0 S1 S3 S4 S5)
[ 12.384238] ACPI: Using PIC for interrupt routing
[ 12.390307] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 12.391033] PCI quirk: region 0800-087f claimed by ICH4 ACPI/GPIO/TCO
[ 12.391039] PCI quirk: region 0880-08bf claimed by ICH4 GPIO
[ 12.391494] PCI: Transparent bridge - 0000:00:1e.0
[ 12.391592] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 12.392033] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT]
[ 12.404898] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11)
[ 12.405058] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *11
[ 12.405216] ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 *11)
[ 12.405372] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 *11)
[ 12.405508] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 12.405671] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 12.405880] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 12.405941] pnp: PnP ACPI init
[ 12.405956] ACPI: bus type pnp registered
[ 12.420507] pnpacpi: exceeded the max number of IO resources: 40
[ 12.420636] pnp: PnP ACPI: found 12 devices
[ 12.420641] ACPI: ACPI bus type pnp unregistered
[ 12.420649] PnPBIOS: Disabled by ACPI PNP
[ 12.421081] PCI: Using ACPI for IRQ routing
[ 12.421086] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 12.444753] NET: Registered protocol family 8
[ 12.444757] NET: Registered protocol family 20
[ 12.444873] AppArmor: AppArmor Filesystem Enabled
[ 12.448734] Time: tsc clocksource has been installed.
[ 12.456801] system 00:00: iomem range 0x0-0x9fbff could not be reserved
[ 12.456807] system 00:00: iomem range 0x9fc00-0x9ffff could not be reserved
[ 12.456812] system 00:00: iomem range 0xc0000-0xcffff could not be reserved
[ 12.456816] system 00:00: iomem range 0xe0000-0xfffff could not be reserved
[ 12.456821] system 00:00: iomem range 0x100000-0x2feeffff could not be reserved
[ 12.456826] system 00:00: iomem range 0x2fef0000-0x2fefffff could not be reserved
[ 12.456831] system 00:00: iomem range 0xfec10000-0xfec1ffff could not be reserved
[ 12.456836] system 00:00: iomem range 0xfeda0000-0xfedfffff could not be reserved
[ 12.456841] system 00:00: iomem range 0xffb00000-0xffbfffff could not be reserved
[ 12.456854] system 00:02: ioport range 0x4d0-0x4d1 has been reserved
[ 12.456859] system 00:02: ioport range 0x800-0x805 has been reserved
[ 12.456863] system 00:02: ioport range 0x808-0x80f has been reserved
[ 12.456874] system 00:03: ioport range 0xf400-0xf4fe has been reserved
[ 12.456878] system 00:03: ioport range 0x806-0x807 has been reserved
[ 12.456882] system 00:03: ioport range 0x810-0x85f has been reserved
[ 12.456886] system 00:03: ioport range 0x860-0x87f has been reserved
[ 12.456890] system 00:03: ioport range 0x880-0x8bf has been reserved
[ 12.456894] system 00:03: ioport range 0x8c0-0x8df has been reserved
[ 12.456899] system 00:03: ioport range 0x8e0-0x8ff has been reserved
[ 12.456913] system 00:08: ioport range 0x900-0x97f has been reserved
[ 12.456924] system 00:0b: ioport range 0x7b0-0x7bb has been reserved
[ 12.456929] system 00:0b: ioport range 0x7c0-0x7df has been reserved
[ 12.456933] system 00:0b: ioport range 0xbb0-0xbbb has been reserved
[ 12.456937] system 00:0b: ioport range 0xbc0-0xbdf has been reserved
[ 12.456941] system 00:0b: ioport range 0xfb0-0xfbb has been reserved
[ 12.456945] system 00:0b: ioport range 0xfc0-0xfdf has been reserved
[ 12.456949] system 00:0b: ioport range 0x13b0-0x13bb has been reserved
[ 12.456953] system 00:0b: ioport range 0x13c0-0x13df has been reserved
[ 12.456957] system 00:0b: ioport range 0x17b0-0x17bb has been reserved
[ 12.456962] system 00:0b: ioport range 0x17c0-0x17df has been reserved
[ 12.456966] system 00:0b: ioport range 0x1bb0-0x1bbb has been reserved
[ 12.456970] system 00:0b: ioport range 0x1bc0-0x1bdf has been reserved
[ 12.456974] system 00:0b: ioport range 0x1fb0-0x1fbb has been reserved
[ 12.456979] system 00:0b: ioport range 0x1fc0-0x1fdf has been reserved
[ 12.456983] system 00:0b: ioport range 0x23b0-0x23bb has been reserved
[ 12.456987] system 00:0b: ioport range 0x23c0-0x23df has been reserved
[ 12.456991] system 00:0b: ioport range 0x27b0-0x27bb has been reserved
[ 12.456995] system 00:0b: ioport range 0x27c0-0x27df has been reserved
[ 12.457000] system 00:0b: ioport range 0x2bb0-0x2bbb has been reserved
[ 12.457004] system 00:0b: ioport range 0x2bc0-0x2bdf has been reserved
[ 12.457008] system 00:0b: ioport range 0x2fb0-0x2fbb has been reserved
[ 12.457012] system 00:0b: ioport range 0x2fc0-0x2fdf has been reserved
[ 12.457021] system 00:0b: ioport range 0x33b0-0x33bb has been reserved
[ 12.457025] system 00:0b: ioport range 0x33c0-0x33df has been reserved
[ 12.457030] system 00:0b: ioport range 0x37b0-0x37bb has been reserved
[ 12.457034] system 00:0b: ioport range 0x37c0-0x37df has been reserved
[ 12.457038] system 00:0b: ioport range 0x3bb0-0x3bbb has been reserved
[ 12.457043] system 00:0b: ioport range 0x3bc0-0x3bdf has been reserved
[ 12.457047] system 00:0b: ioport range 0x3fb0-0x3fbb has been reserved
[ 12.457051] system 00:0b: ioport range 0x3fc0-0x3fdf has been reserved
[ 12.457055] system 00:0b: ioport range 0x43b0-0x43bb has been reserved
[ 12.457060] system 00:0b: ioport range 0x43c0-0x43df has been reserved
[ 12.457064] system 00:0b: ioport range 0x47b0-0x47bb has been reserved
[ 12.457068] system 00:0b: ioport range 0x47c0-0x47df has been reserved
[ 12.457073] system 00:0b: ioport range 0x4bb0-0x4bbb has been reserved
[ 12.457077] system 00:0b: ioport range 0x4bc0-0x4bdf has been reserved
[ 12.457081] system 00:0b: ioport range 0x4fb0-0x4fbb has been reserved
[ 12.457086] system 00:0b: ioport range 0x4fc0-0x4fdf has been reserved
[ 12.457090] system 00:0b: ioport range 0x53b0-0x53bb has been reserved
[ 12.457094] system 00:0b: ioport range 0x53c0-0x53df has been reserved
[ 12.487836] PCI: Bus 3, cardbus bridge: 0000:02:04.0
[ 12.487841] IO window: 0000d000-0000d0ff
[ 12.487847] IO window: 0000d400-0000d4ff
[ 12.487853] PREFETCH window: f8000000-fbffffff
[ 12.487859] MEM window: 44000000-47ffffff
[ 12.487865] PCI: Bridge: 0000:00:1e.0
[ 12.487870] IO window: d000-efff
[ 12.487877] MEM window: f8000000-fdffffff
[ 12.487883] PREFETCH window: disabled.
[ 12.487901] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 12.487925] PCI: Enabling device 0000:02:04.0 (0000 -> 0003)
[ 12.488177] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
[ 12.488182] PCI: setting IRQ 11 as level-triggered
[ 12.488186] ACPI: PCI Interrupt 0000:02:04.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[ 12.488214] NET: Registered protocol family 2
[ 12.524810] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 12.525369] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 12.526564] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 12.527291] TCP: Hash tables configured (established 131072 bind 65536)
[ 12.527298] TCP reno registered
[ 12.536949] checking if image is initramfs...<7>Switched to high resolution mode on CPU 0
[ 13.024099] it is
[ 13.557700] Freeing initrd memory: 7341k freed
[ 13.558489] audit: initializing netlink socket (disabled)
[ 13.558512] audit(1226866575.860:1): initialized
[ 13.562151] VFS: Disk quotas dquot_6.5.1
[ 13.563007] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 13.563238] io scheduler noop registered
[ 13.563242] io scheduler anticipatory registered
[ 13.563245] io scheduler deadline registered
[ 13.563264] io scheduler cfq registered (default)
[ 13.563284] Boot video device is 0000:00:02.0
[ 13.563857] isapnp: Scanning for PnP cards...
[ 13.916872] isapnp: No Plug & Play device found
[ 13.969287] Real Time Clock Driver v1.12ac
[ 13.969464] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 13.970690] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 7
[ 13.970696] PCI: setting IRQ 7 as level-triggered
[ 13.970701] ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 7 (level, low) -> IRQ 7
[ 13.970715] ACPI: PCI interrupt for device 0000:00:1f.6 disabled
[ 13.972119] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 13.972237] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 13.972418] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 13.972626] i8042.c: Warning: Keylock active.
[ 13.975023] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 13.975031] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 13.983571] mice: PS/2 mouse device common for all mice
[ 13.983787] EISA: Probing bus 0 at eisa.0
[ 13.983821] EISA: Detected 0 cards.
[ 13.983826] cpuidle: using governor ladder
[ 13.983829] cpuidle: using governor menu
[ 13.983998] NET: Registered protocol family 1
[ 13.984043] Using IPI No-Shortcut mode
[ 13.984100] registered taskstats version 1
[ 13.984274] Magic number: 0:76:296
[ 13.984312] hash matches device ttywd
[ 13.984414] hash matches device tty29
[ 13.984452] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 13.984455] EDD information not available.
[ 13.984935] Freeing unused kernel memory: 368k freed
[ 13.984974] Write protecting the kernel read-only data: 801k
[ 13.987563] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 15.349893] fuse init (API version 7.9)
[ 15.382159] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 15.382171] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 15.387273] ACPI: Thermal Zone [THM] (27 C)
[ 16.257625] usbcore: registered new interface driver usbfs
[ 16.257667] usbcore: registered new interface driver hub
[ 16.273619] usbcore: registered new device driver usb
[ 16.370731] SCSI subsystem initialized
[ 16.385425] USB Universal Host Controller Interface driver v3.0
[ 16.385528] ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[ 16.385547] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 16.385553] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 16.385955] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 16.385989] uhci_hcd 0000:00:1d.0: irq 11, io base 0x0000bf80
[ 16.386222] usb usb1: configuration #1 chosen from 1 choice
[ 16.386263] hub 1-0:1.0: USB hub found
[ 16.386273] hub 1-0:1.0: 2 ports detected
[ 16.462331] libata version 3.00 loaded.
[ 16.489760] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
[ 16.489767] ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
[ 16.489784] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 16.489790] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 16.489831] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 16.489862] uhci_hcd 0000:00:1d.1: irq 11, io base 0x0000bf40
[ 16.490065] usb usb2: configuration #1 chosen from 1 choice
[ 16.490107] hub 2-0:1.0: USB hub found
[ 16.490117] hub 2-0:1.0: 2 ports detected
[ 16.593688] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
[ 16.593695] ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
[ 16.593712] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 16.593718] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 16.593760] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[ 16.593790] uhci_hcd 0000:00:1d.2: irq 11, io base 0x0000bf20
[ 16.593986] usb usb3: configuration #1 chosen from 1 choice
[ 16.594030] hub 3-0:1.0: USB hub found
[ 16.594040] hub 3-0:1.0: 2 ports detected
[ 16.697760] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11
[ 16.697767] ACPI: PCI Interrupt 0000:00:1d.7[D] -> Link [LNKH] -> GSI 11 (level, low) -> IRQ 11
[ 16.697787] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 16.697793] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 16.697841] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
[ 16.701774] ehci_hcd 0000:00:1d.7: debug port 1
[ 16.701784] PCI: cache line size of 128 is not supported by device 0000:00:1d.7
[ 16.701795] ehci_hcd 0000:00:1d.7: irq 11, io mem 0xf6effc00
[ 16.717149] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 16.717346] usb usb4: configuration #1 chosen from 1 choice
[ 16.717389] hub 4-0:1.0: USB hub found
[ 16.717401] hub 4-0:1.0: 6 ports detected
[ 16.821390] ACPI: PCI Interrupt 0000:02:02.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
[ 16.821434] ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x04, vendor 0x4243)
[ 16.821442] ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x05, vendor 0x4243)
[ 16.821451] ssb: Core 2 found: PCMCIA (cc 0x80D, rev 0x02, vendor 0x4243)
[ 16.821458] ssb: Core 3 found: V90 (cc 0x807, rev 0x02, vendor 0x4243)
[ 16.821466] ssb: Core 4 found: PCI (cc 0x804, rev 0x09, vendor 0x4243)
[ 16.824805] ssb: Sonics Silicon Backplane found on PCI device 0000:02:02.0
[ 16.824940] ata_piix 0000:00:1f.1: version 2.12
[ 16.824957] PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
[ 16.824964] ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[ 16.825055] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 16.829416] scsi0 : ata_piix
[ 16.832088] scsi1 : ata_piix
[ 16.832399] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xbfa0 irq 14
[ 16.832404] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xbfa8 irq 15
[ 17.149047] ata1.00: ATAPI: HL-DT-STCD-RW/DVD-ROM GCC-4243N, A102, max UDMA/33
[ 17.320876] ata1.00: configured for UDMA/33
[ 17.485008] ata2.00: ATA-6: HTS548040M9AT00, MG2OA53A, max UDMA/100
[ 17.485016] ata2.00: 78140160 sectors, multi 8: LBA48
[ 17.500910] ata2.00: configured for UDMA/100
[ 17.505282] scsi 0:0:0:0: CD-ROM HL-DT-ST RW/DVD GCC-4243N A102 PQ: 0 ANSI: 5
[ 17.505565] scsi 1:0:0:0: Direct-Access ATA HTS548040M9AT00 MG2O PQ: 0 ANSI: 5
[ 17.510506] ACPI: PCI Interrupt 0000:02:01.0[A] -> Link [LNKB] -> GSI 7 (level, low) -> IRQ 7
[ 17.528444] ssb: Core 0 found: Fast Ethernet (cc 0x806, rev 0x04, vendor 0x4243)
[ 17.528455] ssb: Core 1 found: V90 (cc 0x807, rev 0x01, vendor 0x4243)
[ 17.528463] ssb: Core 2 found: PCI (cc 0x804, rev 0x02, vendor 0x4243)
[ 17.568498] ssb: Sonics Silicon Backplane found on PCI device 0000:02:01.0
[ 17.568545] b44.c:v2.0
[ 17.588883] eth0: Broadcom 44xx/47xx 10/100BaseT Ethernet 00:0f:1f:1b:93:04
[ 17.643002] Driver 'sr' needs updating - please use bus_type methods
[ 17.649097] Driver 'sd' needs updating - please use bus_type methods
[ 17.662814] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[ 17.662822] Uniform CD-ROM driver Revision: 3.20
[ 17.662915] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 17.668556] sd 1:0:0:0: [sda] 78140160 512-byte hardware sectors (40008 MB)
[ 17.668583] sd 1:0:0:0: [sda] Write Protect is off
[ 17.668588] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 17.668626] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 17.668725] sd 1:0:0:0: [sda] 78140160 512-byte hardware sectors (40008 MB)
[ 17.669253] sd 1:0:0:0: [sda] Write Protect is off
[ 17.669259] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 17.669311] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 17.669318] sda:<5>sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 17.673393] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 17.691489] sda1 sda2 sda3 sda4 < sda5 >
[ 17.723060] sd 1:0:0:0: [sda] Attached SCSI disk
[ 18.178582] Attempting manual resume
[ 18.178590] swsusp: Resume From Partition 8:5
[ 18.178594] PM: Checking swsusp image.
[ 18.179042] PM: Resume from disk failed.
[ 18.266851] kjournald starting. Commit interval 5 seconds
[ 18.266884] EXT3-fs: mounted filesystem with ordered data mode.
[ 18.494989] Clocksource tsc unstable (delta = -2229365116 ns)
[ 18.495984] Time: acpi_pm clocksource has been installed.
[ 37.415742] input: PC Speaker as /devices/platform/pcspkr/input/input2
[ 37.968609] hsfengine: module license 'see LICENSE file distributed with driver' taints kernel.
[ 38.290866] Linux agpgart interface v0.102
[ 38.355871] Synaptics Touchpad, model: 1, fw: 5.9, id: 0x256eb1, caps: 0x804713/0x0
[ 38.426810] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input3
[ 38.482711] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 38.482839] intel_rng: FWH not detected
[ 38.533513] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 38.631359] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 38.834219] ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 7 (level, low) -> IRQ 7
[ 38.903915] ACPI: AC Adapter [AC] (on-line)
[ 39.497234] ACPI: Battery Slot [BAT0] (battery present)
[ 39.497600] input: Lid Switch as /devices/virtual/input/input4
[ 39.520182] ACPI: Lid Switch [LID]
[ 39.520295] input: Power Button (CM) as /devices/virtual/input/input5
[ 39.575370] ACPI: Power Button (CM) [PBTN]
[ 39.575486] input: Sleep Button (CM) as /devices/virtual/input/input6
[ 39.631376] ACPI: Sleep Button (CM) [SBTN]
[ 39.695067] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/LNXVIDEO:00/input/input7
[ 39.743232] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
[ 39.743514] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/LNXVIDEO:01/input/input8
[ 39.743696] iTCO_vendor_support: vendor-support=0
[ 39.771220] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
[ 39.771402] iTCO_wdt: Found a ICH4-M TCO device (Version=1, TCOBASE=0x0860)
[ 39.771460] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 39.799185] ACPI: Video Device [VID2] (multi-head: yes rom: no post: no)
[ 41.639359] PCI: Setting latency timer of device 0000:00:1f.6 to 64
[ 41.639934] HSF: ERROR: not a Conexant modem<3>
[ 41.799253] cnxthsf_cnxt_serial_add: ComCtrlOpen failed (2049)
[ 41.799303] ACPI: PCI interrupt for device 0000:00:1f.6 disabled
[ 41.799346] hsfich: probe of 0000:00:1f.6 failed with error -5
[ 41.799426] agpgart: Detected an Intel 855GM Chipset.
[ 41.799647] agpgart: Detected 892K stolen memory.
[ 41.848244] agpgart: AGP aperture is 128M @ 0xe8000000
[ 41.848342] Yenta: CardBus bridge found at 0000:02:04.0 [1028:017f]
[ 41.848374] Yenta: Using CSCINT to route CSC interrupts to PCI
[ 41.848378] Yenta: Routing CardBus interrupts to PCI
[ 41.848386] Yenta TI: socket 0000:02:04.0, mfunc 0x00001002, devctl 0x64
[ 42.254755] Yenta: ISA IRQ mask 0x0478, PCI irq 11
[ 42.254764] Socket status: 30000007
[ 42.254769] Yenta: Raising subordinate bus# of parent bus (#02) from #02 to #06
[ 42.254781] pcmcia: parent PCI bridge I/O window: 0xd000 - 0xefff
[ 42.254789] cs: IO port probe 0xd000-0xefff: clean.
[ 42.255792] pcmcia: parent PCI bridge Memory window: 0xf8000000 - 0xfdffffff
[ 42.569927] b43-phy0: Broadcom 4306 WLAN found
[ 42.611884] b43-phy0 debug: Found PHY: Analog 2, Type 2, Revision 2
[ 42.611924] b43-phy0 debug: Found Radio: Manuf 0x17F, Version 0x2050, Revision 2
[ 42.658745] phy0: Selected rate control algorithm 'simple'
[ 42.928228] ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 7 (level, low) -> IRQ 7
[ 42.928284] PCI: Setting latency timer of device 0000:00:1f.5 to 64
[ 44.372891] intel8x0_measure_ac97_clock: measured 55327 usecs
[ 44.372900] intel8x0: clocking to 48000
[ 44.489529] NET: Registered protocol family 17
[ 44.845503] cs: IO port probe 0x100-0x3af: clean.
[ 44.847155] cs: IO port probe 0x3e0-0x4ff: clean.
[ 44.847851] cs: IO port probe 0x820-0x8ff: clean.
[ 44.847937] cs: IO port probe 0xc00-0xcf7: clean.
[ 44.848799] cs: IO port probe 0xa00-0xaff: clean.
[ 45.198133] lp: driver loaded but no devices found
[ 45.516631] Adding 1574328k swap on /dev/sda5. Priority:-1 extents:1 across:1574328k
[ 46.362430] EXT3 FS on sda3, internal journal
[ 47.928216] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 48.456292] PPP generic driver version 2.4.2
[ 48.523610] NET: Registered protocol family 10
[ 48.524119] lo: Disabled Privacy Extensions
[ 48.525991] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 50.171936] No dock devices found.
[ 57.881973] apm: BIOS not found.
[ 58.413301] ppdev: user-space parallel port driver
[ 59.581115] audit(1226888218.760:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=5450 profile="/usr/sbin/cupsd" namespace="default"
[ 105.908341] Marking TSC unstable due to: cpufreq changes.
[ 108.550522] input: b43-phy0 as /devices/virtual/input/input9
[ 109.166281] b43-phy0 debug: Loading firmware version 351.126 (2006-07-29 05:54:02)
[ 63.382256] b43-phy0 debug: !WARNING! Idle-TSSI phy->cur_idle_tssi measuring failed. (cur=35, tgt=62). Disabling TX power adjustment.
[ 63.382365] b43-phy0 debug: Chip initialized
[ 63.383849] b43-phy0 debug: 30-bit DMA initialized
[ 63.387813] Registered led device: b43-phy0:tx
[ 63.388288] Registered led device: b43-phy0:rx
[ 63.388564] Registered led device: b43-phy0:radio
[ 63.388656] b43-phy0 ERROR: PHY transmission error
[ 63.388673] b43-phy0 debug: Wireless interface started
[ 63.459111] b43-phy0 debug: Adding Interface type 2
[ 63.459168] b43-phy0 ERROR: PHY transmission error
[ 63.467989] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 115.931567] Bluetooth: Core ver 2.11
[ 115.933640] NET: Registered protocol family 31
[ 115.933654] Bluetooth: HCI device and connection manager initialized
[ 115.933665] Bluetooth: HCI socket layer initialized
[ 116.375831] Bluetooth: L2CAP ver 2.9
[ 116.375844] Bluetooth: L2CAP socket layer initialized
[ 116.576441] Bluetooth: RFCOMM socket layer initialized
[ 116.576485] Bluetooth: RFCOMM TTY layer initialized
[ 116.576491] Bluetooth: RFCOMM ver 1.8
[ 69.956304] [drm] Initialized drm 1.1.0 20060810
[ 70.011663] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[ 70.011681] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 70.011858] [drm] Initialized i915 1.6.0 20060119 on minor 0
[ 70.011881] PCI: Setting latency timer of device 0000:00:02.1 to 64
[ 70.011972] [drm] Initialized i915 1.6.0 20060119 on minor 1
[ 103.971008] usb 4-1: new high speed USB device using ehci_hcd and address 2
[ 104.242722] usb 4-1: configuration #1 chosen from 1 choice
[ 104.628918] b43-phy0 debug: Using hardware based encryption for keyidx: 0, mac: ff:ff:ff:ff:ff:ff
[ 104.650991] wlan0: Initial auth_alg=0
[ 104.651008] wlan0: authenticate with AP 00:12:0e:6c:de:b0
[ 104.661029] wlan0: RX authentication from 00:12:0e:6c:de:b0 (alg=0 transaction=2 status=0)
[ 104.661042] wlan0: authenticated
[ 104.661048] wlan0: associate with AP 00:12:0e:6c:de:b0
[ 104.670346] wlan0: RX AssocResp from 00:12:0e:6c:de:b0 (capab=0x411 status=0 aid=1)
[ 104.670361] wlan0: associated
[ 104.674913] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 105.044084] usbcore: registered new interface driver libusual
[ 105.228964] Initializing USB Mass Storage driver...
[ 105.233362] scsi2 : SCSI emulation for USB Mass Storage devices
[ 105.239171] usbcore: registered new interface driver usb-storage
[ 105.239187] USB Mass Storage support registered.
[ 105.240209] usb-storage: device found at 2
[ 105.240216] usb-storage: waiting for device to settle before scanning
[ 111.566999] usb-storage: device scan complete
[ 111.655333] scsi 2:0:0:0: Direct-Access USB DISK 2.0 PMAP PQ: 0 ANSI: 0 CCS
[ 113.425711] sd 2:0:0:0: [sdb] 4030464 512-byte hardware sectors (2064 MB)
[ 113.427147] sd 2:0:0:0: [sdb] Write Protect is off
[ 113.427158] sd 2:0:0:0: [sdb] Mode Sense: 23 00 00 00
[ 113.427162] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 113.434587] sd 2:0:0:0: [sdb] 4030464 512-byte hardware sectors (2064 MB)
[ 113.436344] sd 2:0:0:0: [sdb] Write Protect is off
[ 113.436360] sd 2:0:0:0: [sdb] Mode Sense: 23 00 00 00
[ 113.436364] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 113.436384] sdb: sdb1
[ 113.547658] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[ 113.547758] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 218.617814] wlan0: no IPv6 routers present
[ 219.254758] b43-phy0 ERROR: PHY transmission error
[ 219.254825] b43-phy0 ERROR: PHY transmission error
[ 162.354092] b43-phy0 ERROR: PHY transmission error
[ 309.481158] b43-phy0 ERROR: PHY transmission error
[ 191.730403] b43-phy0 ERROR: PHY transmission error
[ 356.097026] b43-phy0 ERROR: PHY transmission error
[ 215.548266] b43-phy0 ERROR: PHY transmission error
[ 400.614376] b43-phy0 ERROR: PHY transmission error
[ 240.919178] b43-phy0 ERROR: PHY transmission error
[ 440.857778] b43-phy0 ERROR: PHY transmission error
[ 263.669567] b43-phy0 ERROR: PHY transmission error
[ 480.327522] b43-phy0 ERROR: PHY transmission error
[ 285.904411] b43-phy0 ERROR: PHY transmission error
[ 518.841384] b43-phy0 ERROR: PHY transmission error
[ 307.977316] b43-phy0 ERROR: PHY transmission error
[ 307.977373] b43-phy0 ERROR: PHY transmission error
[ 557.858100] b43-phy0 ERROR: PHY transmission error
[ 333.655161] b43-phy0 ERROR: PHY transmission error
[ 626.145256] b43-phy0 ERROR: PHY transmission error
[ 407.112062] b43-phy0 ERROR: PHY transmission error
[ 760.522523] b43-phy0 ERROR: PHY transmission error
[ 446.477816] b43-phy0 ERROR: PHY transmission error
[ 800.438470] b43-phy0 ERROR: PHY transmission error
[ 470.408784] b43-phy0 ERROR: PHY transmission error
[ 853.234342] b43-phy0 ERROR: PHY transmission error
[ 503.817330] b43-phy0 ERROR: PHY transmission error
[ 503.817391] b43-phy0 ERROR: PHY transmission error
[ 523.674343] b43-phy0 ERROR: PHY transmission error
[ 548.343382] b43-phy0 ERROR: PHY transmission error
[ 548.343439] b43-phy0 ERROR: PHY transmission error
[ 985.186697] b43-phy0 ERROR: PHY transmission error
[ 578.744812] b43-phy0 ERROR: PHY transmission error
[ 1033.747398] b43-phy0 ERROR: PHY transmission error
Only plain text email is forwarded by the Discuss@xxxxxxxxxxxxx List Server,
as HTML can contain viruses. Use as the email Subject Line:
YourName, YourCountry kernel 2.6.24-21-generic
With this Subject Line cogent experts will be alerted, and useful case names left in the Archive.
YourCountry will enable Country specific guidance. Linux experts in YourCountry
can be found through: http://www.linux.org/groups/index.html.
They will know your Country's modem code, which may be essential for dialup service.
Responses from Discuss@xxxxxxxxxxxxx are sometimes blocked by an Internet Provider mail filters.
So in a day, also check the Archived responses at http://www.linmodems.org
-------------------------- System information ----------------------------
CPU=i686,
Linux version 2.6.24-21-generic (buildd@palmer) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Tue Oct 21 23:43:45 UTC 2008
scanModem update of: 2008_11_06
The modem symbolic link is /dev/modem -> ttySL0
There are no blacklisted modem drivers in /etc/modprobe* files
A Linuxant bootup diagnostic reported:
[ 41.639934] HSF: ERROR: not a Conexant modem<3>
Attached USB devices are:
ID 13fe:1e00 Kingston Technology Company Inc.
USB modems not recognized
For candidate card in slot 00:1f.6, firmware information and bootup diagnostics are:
PCI slot PCI ID SubsystemID Name
---------- --------- --------- --------------
00:1f.6 8086:24c6 14e4:4d64 Modem: Intel Corporation 82801DB/DBL/DBM
Modem interrupt assignment and sharing:
7: 460 XT-PIC-XT eth0, Intel 82801DB-ICH4
--- Bootup diagnostics for card in PCI slot 00:1f.6 ----
[ 13.970701] ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 7 (level, low) -> IRQ 7
[ 13.970715] ACPI: PCI interrupt for device 0000:00:1f.6 disabled
[ 38.834219] ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 7 (level, low) -> IRQ 7
[ 41.639359] PCI: Setting latency timer of device 0000:00:1f.6 to 64
[ 41.799303] ACPI: PCI interrupt for device 0000:00:1f.6 disabled
[ 41.799346] hsfich: probe of 0000:00:1f.6 failed with error -5
The PCI slot 00:1f.6 of the modem card may be disabled early in
a bootup process, but then enabled later. If modem drivers load
but the modem is not responsive, read DOCs/Bootup.txt about possible fixes.
Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx
if help is needed.
===== Advanced Linux Sound Architecture (ALSA) diagnostics =====
The ALSA packages provide audio support and also drivers for some modems.
ALSA diagnostics are written during bootup to /proc/asound/ folders.
The ALSA verion is 1.0.16
The modem cards detected by "aplay -l" are: None
The /proc/asound/pcm file reports:
-----------------------
00-04: Intel ICH - IEC958 : Intel 82801DB-ICH4 - IEC958 : playback 1
00-03: Intel ICH - ADC2 : Intel 82801DB-ICH4 - ADC2 : capture 1
00-02: Intel ICH - MIC2 ADC : Intel 82801DB-ICH4 - MIC2 ADC : capture 1
00-01: Intel ICH - MIC ADC : Intel 82801DB-ICH4 - MIC ADC : capture 1
00-00: Intel ICH : Intel 82801DB-ICH4 : playback 1 : capture 1
about /proc/asound/cards:
------------------------
0 [I82801DBICH4 ]: ICH4 - Intel 82801DB-ICH4
Intel 82801DB-ICH4 with STAC9750,51 at irq 7
=== Finished firmware and bootup diagnostics, next deducing cogent software. ===
Predictive diagnostics for card in bus 00:1f.6:
Modem chipset detected on
NAME="Modem: Intel Corporation 82801DB/DBL/DBM "
CLASS=0703
PCIDEV=8086:24c6
SUBSYS=14e4:4d64
IRQ=7
SOFT=8086:24c6.MC97
CodecArchived=BCM64
IDENT=slmodemd
SLMODEMD_DEVICE=modem:1
Driver=snd-intel8x0m
For candidate modem in: 00:1f.6
0703 Modem: Intel Corporation 82801DB/DBL/DBM
Primary device ID: 8086:24c6
Subsystem PCI_id 14e4:4d64
Softmodem codec or chipset from diagnostics:
from Archives: BCM64
Support type needed or chipset: slmodemd
An ALSA (Advanced Linux Sound Architecture) modem driver: snd-intel8x0m
provides Low Level support enabling contact with the modem hardware.
For all BUT Conexant chip soft modems (using hsfmodem software)
complementary High Level support is through a Smartlink utility: slmodemd
Download from http://linmodems.technion.ac.il/packages/smartlink/
the package SLMODEMD.gcc4.2.tar.gz having a compiled slmodemd. Unpack under Linux with:
$ tar zxf SLMODEMD.gcc4.2.tar.gz
and read instructions therein. But briefly, the modem is setup with command:
sudo slmodemd -c YOUR_COUNTRY --alsa modem:1
reporting dynamic creation of ports:
/dev/ttySL0 --> /dev/pts/N , with N some number
Read DOCs/Smartlink.txt and Modem/DOCs/YourSystem.txt for follow through guidance.
----------------end Softmodem section --------------
Writing DOCs/Intel.txt
Writing DOCs/Smartlink.txt
============ end Smartlink section =====================
Completed candidate modem analyses.
The base of the UDEV device file system is: /dev/.udev
Versions adequately match for the compiler installed: 4.2.3
and the compiler used in kernel assembly: 4.2.4
Minimal compiling resources appear complete:
make utility - /usr/bin/make
Compiler version 4.2
linuc_headers base folder /lib/modules/2.6.24-21-generic/build
However some compilations and executable functions may need additional files,
in the FileNames.h (so called kernel "h"eaders) collection installed in /usr/include/ .
For martian_modem, additional required packages are needed. The also required headers of package libc6 are commonly installed by default.
Compiling hsfmodem drivers does require linux-libc-dev and libc6-dev packages, for kernels 2.6.24 and later versions.
In not included on your install CD, search for them at http://packages.ubuntu.com
or comparable Repository for other Linux distros.
When compiling ALSA drivers, the utility "patch" will also be needed.
Compressed files at: /usr/src/sl-modem.tar.bz2
If a driver compilation fails, with message including some lack of some FileName.h (stdio.h for example), then
Some additional kernel-header files need installation to /usr/include. The minimal additional packages are libc6-dev
and any of its dependents, under Ubuntu linux-libc-dev
If an alternate ethernet connection is available,
$ apt-get update
$ apt-get -s install linux-kernel-devel
will install needed packages.
For Debian/Ubuntu related distributions, run the following command to display the needed package list:
Otherwise packages have to be found through http://packages.ubuntu.com
Once downloaded and transferred into a Linux partition,
they can be installed alltogether with:
$ sudo dpkg -i *.deb
Checking pppd properties:
-rwsr-xr-- 1 root dip 269256 2007-10-04 14:57 /usr/sbin/pppd
In case of an "error 17" "serial loopback" problem, see:
http://linmodems.technion.ac.il/linmodems/archive-sixth/msg02637.html
To enable dialout without Root permission do:
$ su - root (not for Ubuntu)
sudo chmod a+x /usr/sbin/pppd
or under Ubuntu related Linuxes
sudo chmod a+x /usr/sbin/pppd
Checking settings of: /etc/ppp/options
asyncmap 0
noauth
crtscts
lock
hide-password
modem
proxyarp
lcp-echo-interval 30
lcp-echo-failure 4
noipx
In case of a message like:
Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html
Read Modem/DOCs/YourSystem.txt concerning other COMM channels: eth0 eth0:avahi wlan0 wmaster0
Which can interfere with Browser naviagation.
Don't worry about the following, it is for experts should trouble shooting be necessary.
==========================================================
# start/stop the daemon when the USB modem is connected
KERNEL=="slusb[0-9]*", GROUP="dialout", RUN+="/etc/init.d/sl-modem-daemon"
Checking for modem support lines:
--------------------------------------
/device/modem symbolic link: lrwxrwxrwx 1 root root 6 2008-11-16 20:16 /dev/modem -> ttySL0
slmodemd created symbolic link /dev/ttySL0:
Within /etc/udev/ files:
/etc/udev/rules.d/030_sl-modem-daemon.rules:# start/stop the daemon when the USB modem is connected
/etc/udev/rules.d/030_sl-modem-daemon.rules:KERNEL=="slusb[0-9]*", GROUP="dialout", RUN+="/etc/init.d/sl-modem-daemon"
/etc/udev/rules.d/00-hsf.rules:KERNEL=="ttySHSF0", SYMLINK="modem"
/etc/udev/sl-modem-daemon.rules:# start/stop the daemon when the USB modem is connected
/etc/udev/sl-modem-daemon.rules:KERNEL=="slusb[0-9]*", GROUP="dialout", RUN+="/etc/init.d/sl-modem-daemon"
Within /etc/modprobe.conf files:
/etc/modprobe.d/blacklist-modem:# Uncomment these entries in order to blacklist unwanted modem drivers
/etc/modprobe.d/blacklist-modem:# blacklist snd-atiixp-modem
/etc/modprobe.d/blacklist-modem:# blacklist snd-via82xx-modem
/etc/modprobe.d/sl-modem-daemon.modutils:install slamr modprobe --ignore-install ungrab-winmodem ; modprobe --ignore-install slamr; test -e /dev/slamr0 || (/bin/mknod -m 660 /dev/slamr0 c 242 0 2>/dev/null && chgrp dialout /dev/slamr0)
/etc/modprobe.d/alsa-base:options snd-atiixp-modem index=-2
/etc/modprobe.d/alsa-base:options snd-via82xx-modem index=-2
/etc/modprobe.d/hsf:alias /dev/modem /dev/ttySHSF
/etc/modprobe.d/hsf.conflicts:install snd-via82xx-modem /bin/true # temporarily disabled by hsf - conflicts with hsfmc97via
/etc/modprobe.d/hsf.conflicts:install snd-atiixp-modem /bin/true # temporarily disabled by hsf - conflicts with hsfmc97ati
Within any ancient /etc/devfs files:
/etc/devfs/conf.d/hsf.conf:LOOKUP ^(ttySHSF[0-9]|modem$) EXECUTE nice /sbin/modprobe /dev/ttySHSF
/etc/devfs/conf.d/hsf.conf:REGISTER ^ttySHSF0$ CFUNCTION GLOBAL symlink $devname modem
/etc/devfs/conf.d/hsf.conf:UNREGISTER ^ttySHSF0$ CFUNCTION GLOBAL unlink modem
Within ancient kernel 2.4.n /etc/module.conf files:
/etc/modules.conf:alias /dev/modem /dev/ttySHSF
--------- end modem support lines --------
