Re: 64 bit architecture

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Glenn,

Only under Intel architecture or a 32bit emulation installation on
your current hardware, could you achieve support for

Motorola SM56 Data Fax Modem (rev 04)
with  1057:3052 chipset
There support  is  by ungrab-winmodem.ko + slamr.ko  drivers.
But slamr cannot be compiled in 64 bit mode, because there is a
pre-compiled 32 bit component,

Read InforGeneral.txt about other hardware options.

MarvS

On Thu, Nov 6, 2008 at 2:35 AM, Glenn Stuart Morrissey
<gmorrissey@xxxxxxxxx> wrote:
> Martin,
>
> here is the output that you requested:
>
> glenn@glenn1:~$ which lspci
> /usr/bin/lspci
> glenn@glenn1:~$ sudo lspci -s 06:06.0
> [sudo] password for glenn:
> 06:06.0 Modem: Motorola SM56 Data Fax Modem (rev 04)
> glenn@glenn1:~$ sudo lspci -s 06:06.0 -nv
> 06:06.0 0703: 1057:3052 (rev 04) (prog-if 00 [Generic])
>   Subsystem: 1057:3020
>   Flags: bus master, stepping, medium devsel, latency 64, IRQ 21
>   Memory at febff000 (32-bit, non-prefetchable) [size=4K]
>   I/O ports at e800 [size=256]
>   Capabilities: [80] Power Management version 2
>
> glenn@glenn1:~$
>
> I cant run any microsoft diagnostics as it is a linux only box.
>
> Glenn.
>
>

[Index of Archives]     [Linux Media Development]     [Asterisk]     [DCCP]     [Netdev]     [X.org]     [Xfree86]     [Fedora Women]     [Linux USB]

  Powered by Linux