Sai,
For candidate modem in: 0000:00:09.0
0703 Modem: PCTel Inc HSP56 MicroModem
Primary device ID: 134d:2189
Support type needed or chipset: slamr
-------------
However this driver cannot be compiled for function with x86_64 processor.
If you should do a 32bit emulation installation, it could be supported.
Read InfoGeneral about other modem alternatives.
MarvS
On Wed, Nov 5, 2008 at 8:42 PM, sai ram <k_sairam12@xxxxxxxxxxxxxx> wrote:
>
> Only plain text email is forwarded by the Discuss@xxxxxxxxxxxxx List
> Server,
> as HTML can contain viruses. Use as the email Subject Line:
> YourName, YourCountry kernel 2.6.15-23-amd64-generic
> With this Subject Line cogent experts will be alerted, and useful case names
> left in the Archive.
> YourCountry will enable Country specific guidance. Linux experts in
> YourCountry
> can be found through: http://www.linux.org/groups/index.html.
> They will know your Country's modem code, which may be essential for dialup
> service.
> Responses from Discuss@xxxxxxxxxxxxx are sometimes blocked by an Internet
> Provider mail filters.
> So in a day, also check the Archived responses at http://www.linmodems.org
> -------------------------- System information ----------------------------
> CPU=x86_64,
> Linux version 2.6.15-23-amd64-generic (buildd@yellow) (gcc version 4.0.3
> (Ubuntu 4.0.3-1ubuntu5)) #1 SMP PREEMPT Tue May 23 13:45:47 UTC 2006
> scanModem update of: 2008_10_24
>
>
> Some modem drivers can only be used in 32 bit modem on x86_64 systems,
> while some others are competent on x86_64 Systems. Cases are:
> 1) http://linmodems.technion.ac.il/bigarch/archive-seventh/msg03119.html
> for the snd-hda-intel audio+modem driver. Also applicable to AC97 modem
> controllers.
> In both cases, 32 bit libraries must be installed to support the slmodemd
> helper having a precompiled 32 bit component.
> 2) For USB modems using the slusb.ko driver. 32 bit libraries must be
> installed to support the slmodemd helper having a precompiled 32 bit
> component
> 3) The hsfmodem and hcfpcimodem drivers for Conexant chipsest modes are
> x86_64 competent.
>
>
> Predictive diagnostics for card in bus 0000:00:09.0:
> Modem chipset not detected on
>
>
>
> For candidate modem in: 0000:00:09.0
>
> Primary device ID:
> Support type needed or chipset:
>
>
> ----------------end Softmodem section --------------
>
> scanModem could not identify the Support Type needed from diagnosics or
> archives.
> If an alternative boot into Microsoft windows can be done, do mouse
> clicks on:
> Start > Settings > Control Panel > Classical View (for Window XP) > System
>> Hardware > Device Manager > Modems > Click on the + > Modem. Double click
>> to
> expand the graphic. Manufacturer information may be displayed. For example,
> CXT
> stands for Conexant. Click the Diagnostics Tab. Record any hardware ID or
> vendor
> and device information.
> Next do the Query Modem and record the ATI specifications displayed such as:
> ATI3 - Agere SoftModem Version 2.1.22
> ATI5 - 2.1.22, AMR Intel MB, AC97 ID:SIL REV:0x27
> Try to identify the modem setup file, with name perhaps MODEM.INF.
> If may contain chipset Vendor informaton.
>
>
> Completed candidate modem analyses.
>
> The base of the UDEV device file system is: /dev/.udev
>
> The kernel was compiled with gcc version 4.0.3 and a compiler is not
> installed
>
>
> If compiling a modem driver proves to be necessary, one of the two
> procedures must be followed.
> If not yet on the Internet, put the Dapper install CD in the drive
> Open a terminal and therein:
> $ sudo apt-get install gcc-4.0 make
> Additionally the package linux-headers-2.6.15-23-amd64-generic must be
> downloaded.
> Go to http://packages.ubuntu.com/ and search for
> linux-headers-2.6.15-23-amd64-generic
> After downloading, it can be installed with:
> $ sudo dpkg -i linux-header*.deb
>
> Or alternatively if online through Ethernet do:
> $ sudo apt-get update
> $ sudo apt-get install build-essential
> will do all the necessary installations mentioned above.
>
> In either installation case, set a symbolic link which will be expected
> later:
> $ sudo ln -s /usr/bin/gcc-4.0 /usr/bin/gcc
> After check with:
> $ ls -l /usr/bin/gcc*
> which should display:
> lrwxrwxrwx 1 root root 16 2006-07-09 21:53 /usr/bin/gcc ->
> /usr/bin/gcc-4.0
> -rwxr-xr-x 1 root root 93584 2006-04-20 18:22 /usr/bin/gcc-4.0
> -rwxr-xr-x 1 root root 16245 2006-04-20 18:13 /usr/bin/gccbug-4.0
>
> linux-headers-2.6.15-23-amd64-generic resources needed for compiling are not
> manifestly ready!
>
> If compiling is necessary packages must be installed, providing:
> gcc-4.0 make linux-headers-2.6.15-23-amd64-generic
>
>
> If a driver compilation fails, with message including some lack of some
> FileName.h (stdio.h for example), then
> Some additional kernel-header files need installation to /usr/include. The
> minimal additional packages are libc6-dev
> and any of its dependents, under Ubuntu linux-libc-dev
>
> If an alternate ethernet connection is available,
> $ apt-get update
> $ apt-get -s install linux-kernel-devel
> will install needed packages.
> For Debian/Ubuntu related distributions, run the following command to
> display the needed package list:
>
> Otherwise packages have to be found through http://packages.ubuntu.com
> Once downloaded and transferred into a Linux partition,
> they can be installed alltogether with:
> $ sudo dpkg -i *.deb
>
>
> Checking pppd properties:
> -rwsr-xr-- 1 root dip 306720 2006-02-23 22:01 /usr/sbin/pppd
>
> In case of an "error 17" "serial loopback" problem, see:
> http://linmodems.technion.ac.il/linmodems/archive-sixth/msg02637.html
>
> To enable dialout without Root permission do:
> $ su - root (not for Ubuntu)
> sudo chmod a+x /usr/sbin/pppd
> or under Ubuntu related Linuxes
> sudo chmod a+x /usr/sbin/pppd
>
> There are no blacklisted modem drivers in /etc/modprobe* files
> Checking settings of: /etc/ppp/options
> asyncmap 0
> auth
> crtscts
> lock
> hide-password
> modem
> proxyarp
> lcp-echo-interval 30
> lcp-echo-failure 4
> noipx
>
> In case of a message like:
> Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
> see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html
>
> Read Modem/DOCs/YourSystem.txt concerning other COMM channels: eth0
> Which can interfere with Browser naviagation.
>
> Don't worry about the following, it is for experts should trouble shooting
> be necessary.
> ==========================================================
>
> Checking for modem support lines:
> --------------------------------------
> /device/modem symbolic link:
> slmodemd created symbolic link /dev/ttySL0:
> Within /etc/udev/ files:
> /etc/udev/rules.d/60-symlinks.rules:# Create /dev/modem symlink
> /etc/udev/rules.d/60-symlinks.rules:KERNEL=="ttyLTM[0-9]*",
> SYMLINK+="modem"
> Within /etc/modprobe.conf files:
> /etc/modprobe.d/alsa-base:options snd-atiixp-modem index=-2
> /etc/modprobe.d/alsa-base:options snd-via82xx-modem index=-2
> /etc/modprobe.d/blacklist-modem:# Uncomment these entries in order to
> blacklist unwanted modem drivers
> /etc/modprobe.d/blacklist-modem:# blacklist snd-atiixp-modem
> /etc/modprobe.d/blacklist-modem:# blacklist snd-via82xx-modem
> Within any ancient /etc/devfs files:
>
> Within ancient kernel 2.4.n /etc/module.conf files:
>
> --------- end modem support lines --------
>
> USB modems not recognized
>
> For candidate card in slot 0000:00:09.0, firmware information and bootup
> diagnostics are:
> PCI slot PCI ID SubsystemID Name
> ---------- --------- --------- --------------
> 0000:00:09.0 134d:2189 134d:1002 Modem: PCTel Inc HSP56
> MicroModem
>
> Modem interrupt assignment and sharing:
> --- Bootup diagnostics for card in PCI slot 0000:00:09.0 ----
> [ 19.787469] ACPI: PCI Interrupt 0000:00:09.0[A] -> GSI 17 (level, low) ->
> IRQ 169
> [ 19.787652] 0000:00:09.0: ttyS5 at I/O 0xe808 (irq = 169) is a 16450
> [ 19.787774] 0000:00:09.0: ttyS6 at I/O 0xe810 (irq = 169) is a 8250
> [ 19.787883] 0000:00:09.0: ttyS7 at I/O 0xe818 (irq = 169) is a 16450
> [ 19.787992] 0000:00:09.0: ttyS8 at I/O 0xe820 (irq = 169) is a 8250
> [ 19.788101] 0000:00:09.0: ttyS9 at I/O 0xe828 (irq = 169) is a 8250
>
> === Finished firmware and bootup diagnostics, next deducing cogent software.
> ===
>
> Predictive diagnostics for card in bus 0000:00:09.0:
> Modem chipset detected on
> NAME="Modem: PCTel Inc HSP56 MicroModem "
> CLASS=0703
> PCIDEV=134d:2189
> SUBSYS=134d:1002
> IRQ=169
> IDENT=slamr
>
> For candidate modem in: 0000:00:09.0
> 0703 Modem: PCTel Inc HSP56 MicroModem
> Primary device ID: 134d:2189
> Support type needed or chipset: slamr
>
>
> ----------------end Softmodem section --------------
> 134d:2189 is a PCTel HSP56 MicroModem 688T modem with the Oasis chipset.
> Under 2.6.n kernels, it is only supported through the Smartlink slamr.ko
> driver.
>
> The modem is supported by the Smartlink slamr
> plus the slmodemd helper utility. Read the
> DOCs/Smartlink.txt and Modem/DOCs/YourSystem.txt for follow through
> guidance.
>
>
> For 2.6.15-23-amd64-generic compiling drivers is necessary. As of October
> 2007 the current packages at
> http://linmodems.technion.ac.il/packages/smartlink/ are the
> ungrab-winmodem-20070505.tar.gz and slmodem-2.9.11-20080126.tar.gz
>
> Writing DOCs/Smartlink.txt
> ============ end Smartlink section =====================
>
> Completed candidate modem analyses.
>
> The base of the UDEV device file system is: /dev/.udev
>
> The kernel was compiled with gcc version 4.0.3 and a compiler is not
> installed
>
>
> If compiling a modem driver proves to be necessary, one of the two
> procedures must be followed.
> If not yet on the Internet, put the Dapper install CD in the drive
> Open a terminal and therein:
> $ sudo apt-get install gcc-4.0 make
> Additionally the package linux-headers-2.6.15-23-amd64-generic must be
> downloaded.
> Go to http://packages.ubuntu.com/ and search for
> linux-headers-2.6.15-23-amd64-generic
> After downloading, it can be installed with:
> $ sudo dpkg -i linux-header*.deb
>
> Or alternatively if online through Ethernet do:
> $ sudo apt-get update
> $ sudo apt-get install build-essential
> will do all the necessary installations mentioned above.
>
> In either installation case, set a symbolic link which will be expected
> later:
> $ sudo ln -s /usr/bin/gcc-4.0 /usr/bin/gcc
> After check with:
> $ ls -l /usr/bin/gcc*
> which should display:
> lrwxrwxrwx 1 root root 16 2006-07-09 21:53 /usr/bin/gcc ->
> /usr/bin/gcc-4.0
> -rwxr-xr-x 1 root root 93584 2006-04-20 18:22 /usr/bin/gcc-4.0
> -rwxr-xr-x 1 root root 16245 2006-04-20 18:13 /usr/bin/gccbug-4.0
>
> linux-headers-2.6.15-23-amd64-generic resources needed for compiling are not
> manifestly ready!
>
> If compiling is necessary packages must be installed, providing:
> gcc-4.0 make linux-headers-2.6.15-23-amd64-generic
>
>
> If a driver compilation fails, with message including some lack of some
> FileName.h (stdio.h for example), then
> Some additional kernel-header files need installation to /usr/include. The
> minimal additional packages are libc6-dev
> and any of its dependents, under Ubuntu linux-libc-dev
>
> If an alternate ethernet connection is available,
> $ apt-get update
> $ apt-get -s install linux-kernel-devel
> will install needed packages.
> For Debian/Ubuntu related distributions, run the following command to
> display the needed package list:
>
> Otherwise packages have to be found through http://packages.ubuntu.com
> Once downloaded and transferred into a Linux partition,
> they can be installed alltogether with:
> $ sudo dpkg -i *.deb
>
>
> Checking pppd properties:
> -rwsr-xr-- 1 root dip 306720 2006-02-23 22:01 /usr/sbin/pppd
>
> In case of an "error 17" "serial loopback" problem, see:
> http://linmodems.technion.ac.il/linmodems/archive-sixth/msg02637.html
>
> To enable dialout without Root permission do:
> $ su - root (not for Ubuntu)
> sudo chmod a+x /usr/sbin/pppd
> or under Ubuntu related Linuxes
> sudo chmod a+x /usr/sbin/pppd
>
> Checking settings of: /etc/ppp/options
> asyncmap 0
> auth
> crtscts
> lock
> hide-password
> modem
> proxyarp
> lcp-echo-interval 30
> lcp-echo-failure 4
> noipx
>
> In case of a message like:
> Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
> see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html
>
> Read Modem/DOCs/YourSystem.txt concerning other COMM channels: eth0
> Which can interfere with Browser naviagation.
>
> Don't worry about the following, it is for experts should trouble shooting
> be necessary.
> ==========================================================
>
> Checking for modem support lines:
> --------------------------------------
> /device/modem symbolic link:
> slmodemd created symbolic link /dev/ttySL0:
> Within /etc/udev/ files:
> /etc/udev/rules.d/60-symlinks.rules:# Create /dev/modem symlink
> /etc/udev/rules.d/60-symlinks.rules:KERNEL=="ttyLTM[0-9]*",
> SYMLINK+="modem"
> Within /etc/modprobe.conf files:
> /etc/modprobe.d/alsa-base:options snd-atiixp-modem index=-2
> /etc/modprobe.d/alsa-base:options snd-via82xx-modem index=-2
> /etc/modprobe.d/blacklist-modem:# Uncomment these entries in order to
> blacklist unwanted modem drivers
> /etc/modprobe.d/blacklist-modem:# blacklist snd-atiixp-modem
> /etc/modprobe.d/blacklist-modem:# blacklist snd-via82xx-modem
> Within any ancient /etc/devfs files:
>
> Within ancient kernel 2.4.n /etc/module.conf files:
>
> --------- end modem support lines --------
>
>
>
>
