Azary, You may safely download http://linmodems.technion.ac.il/packages/smartlink/slmodem-2.9.11-20080817.tar.gz and http://linmodems.technion.ac.il/packages/smartlink/ungrab-winmodem-20080126.tar.gz For candidate modem in: 00:09.0 0703 Modem: Smart Link Ltd. Unknown device 2800 Primary device ID: 2000:2800 Support type needed or chipset: slamr ----------------end Softmodem section -------------- The modem is supported by the Smartlink plus the slmodemd helper utility. Read the DOCs/Smartlink.txt and Modem/DOCs/YourSystem.txt for follow through guidance. For 2.6.22.5-31-default compiling drivers is necessary. As of October 2007 the current packages at http://linmodems.technion.ac.il/packages/smartlink/ are the ungrab-winmodem-20070505.tar.gz and slmodem-2.9.11-20080126.tar.gz Regards, Antonio --- On Thu, 10/9/08, Soroosh Azary Marhabi <soroosh.azary@xxxxxxxxx> wrote: > From: Soroosh Azary Marhabi <soroosh.azary@xxxxxxxxx> > Subject: azary, Iran ,Welcome to openSUSE 10.3 (i586) - Kernel kernel 2.6.22.5-31-default > To: Discuss@xxxxxxxxxxxxx > Date: Thursday, October 9, 2008, 9:55 AM > Only plain text email is forwarded by the > Discuss@xxxxxxxxxxxxx List Server, > as HTML can contain viruses. Use as the email Subject > Line: > YourName, YourCountry > Welcome to openSUSE 10.3 (i586) - Kernel kernel > 2.6.22.5-31-default > With this Subject Line cogent experts will be alerted, and > useful case names left in the Archive. > YourCountry will enable Country specific guidance. Linux > experts in YourCountry > can be found through: > http://www.linux.org/groups/index.html. > They will know your Country's modem code, which may be > essential for dialup service. > Responses from Discuss@xxxxxxxxxxxxx are sometimes blocked > by an Internet Provider mail filters. > So in a day, also check the Archived responses at > http://www.linmodems.org > -------------------------- System information > ---------------------------- > CPU=i686, > Welcome to openSUSE 10.3 (i586) - Kernel > Linux version 2.6.22.5-31-default (geeko@buildhost) (gcc > version 4.2.1 (SUSE Linux)) #1 SMP 2007/09/21 22:29:00 UTC > scanModem update of: 2008_08_26 > > There are no blacklisted modem drivers in /etc/modprobe* > files > USB modems not recognized > > For candidate card in slot 00:09.0, firmware information > and bootup diagnostics are: > PCI slot PCI ID SubsystemID Name > ---------- --------- --------- -------------- > 00:09.0 2000:2800 1801:2800 Modem: Smart Link Ltd. Unknown > device 2800 > > Modem interrupt assignment and sharing: > --- Bootup diagnostics for card in PCI slot 00:09.0 ---- > ACPI: PCI Interrupt 0000:00:09.0[A] -> GSI 17 (level, > low) -> IRQ 16 > ACPI: PCI Interrupt 0000:00:09.0[A] -> GSI 17 (level, > low) -> IRQ 16 > ACPI: PCI interrupt for device 0000:00:09.0 disabled > > The PCI slot 00:09.0 of the modem card may be disabled > early in > a bootup process, but then enabled later. If modem > drivers load > but the modem is not responsive, read DOCs/Bootup.txt > about possible fixes. > Send dmesg.txt along with ModemData.txt to > discuss@xxxxxxxxxxxxx > if help is needed. > > > === Finished firmware and bootup diagnostics, next deducing > cogent software. === > > Predictive diagnostics for card in bus 00:09.0: > Modem chipset detected on > NAME="Modem: Smart Link Ltd. Unknown device 2800 > " > CLASS=0703 > PCIDEV=2000:2800 > SUBSYS=1801:2800 > IRQ=16 > IDENT=slamr > > For candidate modem in: 00:09.0 > 0703 Modem: Smart Link Ltd. Unknown device 2800 > Primary device ID: 2000:2800 > Support type needed or chipset: slamr > > > ----------------end Softmodem section -------------- > The modem is supported by the Smartlink > plus the slmodemd helper utility. Read the > DOCs/Smartlink.txt and Modem/DOCs/YourSystem.txt for follow > through guidance. > > > For 2.6.22.5-31-default compiling drivers is necessary. As > of October 2007 the current packages at > http://linmodems.technion.ac.il/packages/smartlink/ are > the > ungrab-winmodem-20070505.tar.gz and > slmodem-2.9.11-20080126.tar.gz > > Writing DOCs/Smartlink.txt > ============ end Smartlink section ===================== > > Completed candidate modem analyses. > > The base of the UDEV device file system is: /dev/.udev > > Versions adequately match for the compiler installed: > 4.2.1 > and the compiler used in kernel assembly: > 4.2.1 > > > > Minimal compiling resources appear complete: > make utility - /usr/bin/make > Compiler version 4.2 > linuc_headers base folder > /lib/modules/2.6.22.5-31-default/build > > However some compilations and executable functions may > need additional files, > in the FileNames.h (so called kernel "h"eaders) > collection installed in /usr/include/ . > For martian_modem, additional required packages are > needed. The also required headers of package libc6 are > commonly installed by default. > Compiling hsfmodem drivers does require linux-libc-dev and > libc6-dev packages, for kernels 2.6.24 and later versions. > In not included on your install CD, search for them at > http://packages.ubuntu.com > or comparable Repository for other Linux distros. > When compiling ALSA drivers, the utility "patch" > will also be needed. > > > > > If a driver compilation fails, with message including some > lack of some FileName.h (stdio.h for example), then > Some additional kernel-header files need installation to > /usr/include. The minimal additional packages are libc6-dev > and any of its dependents, under Ubuntu linux-libc-dev > > If an alternate ethernet connection is available, > $ apt-get update > $ apt-get -s install linux-kernel-devel > will install needed packages. > For Debian/Ubuntu related distributions, run the following > command to display the needed package list: > > Otherwise packages have to be found through > http://packages.ubuntu.com > Once downloaded and transferred into a Linux partition, > they can be installed alltogether with: > $ sudo dpkg -i *.deb > > > Checking pppd properties: > -rwxr-xr-x 1 root dialout 298784 Sep 22 2007 > /usr/sbin/pppd > > In case of an "error 17" "serial > loopback" problem, see: > > http://linmodems.technion.ac.il/linmodems/archive-sixth/msg02637.html > > To enable dialout without Root permission do: > $ su - root (not for Ubuntu) > chmod a+x /usr/sbin/pppd > or under Ubuntu related Linuxes > chmod a+x /usr/sbin/pppd > > Checking settings of: /etc/ppp/options > noipdefault > noauth > crtscts > lock > modem > asyncmap 0 > nodetach > lcp-echo-interval 30 > lcp-echo-failure 4 > lcp-max-configure 60 > lcp-restart 2 > idle 600 > noipx > file /etc/ppp/filters > > In case of a message like: > Warning: Could not modify /etc/ppp/pap-secrets: > Permission denied > see > http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html > > Read Modem/DOCs/YourSystem.txt concerning other COMM > channels: eth0 > Which can interfere with Browser naviagation. > > Don't worry about the following, it is for experts > should trouble shooting be necessary. > ========================================================== > > Checking for modem support lines: > -------------------------------------- > /device/modem symbolic link: > slmodemd created symbolic link /dev/ttySL0: > Within /etc/udev/ files: > /etc/udev/rules.d/77-network.rules:SUBSYSTEM=="net", > ENV{INTERFACE}=="ppp*|ippp*|isdn*|plip*|lo*|irda*|dummy*|ipsec*|tun*|tap*|bond*|vlan*|modem*|dsl*", > GOTO="skip_ifup" > /etc/udev/rules.d/50-udev-default.rules:KERNEL=="mwave", NAME="modems/%k", > GROUP="uucp" > Within /etc/modprobe.conf files: > /etc/modprobe.conf:# Linux ACP modem (Mwave) > Within any ancient /etc/devfs files: > > Within ancient kernel 2.4.n /etc/module.conf files: > > --------- end modem support lines -------- > > CPU0 > 0: 285 IO-APIC-edge timer > 1: 1024 IO-APIC-edge i8042 > 6: 5 IO-APIC-edge floppy > 7: 0 IO-APIC-edge parport0 > 8: 2 IO-APIC-edge rtc > 9: 1 IO-APIC-fasteoi acpi > 12: 44049 IO-APIC-edge i8042 > 14: 4205 IO-APIC-edge libata > 15: 23981 IO-APIC-edge libata > 17: 0 IO-APIC-fasteoi sata_via > 18: 0 IO-APIC-fasteoi uhci_hcd:usb1, > uhci_hcd:usb2, uhci_hcd:usb3, ehci_hcd:usb4, uhci_hcd:usb5 > 19: 3924 IO-APIC-fasteoi VIA8237 > 20: 0 IO-APIC-fasteoi eth0 > 21: 38016 IO-APIC-fasteoi radeon@pci:0000:01:00.0 > NMI: 0 > LOC: 104856 > ERR: 0 > MIS: 0 > > Linux version 2.6.22.5-31-default (geeko@buildhost) (gcc > version 4.2.1 (SUSE Linux)) #1 SMP 2007/09/21 22:29:00 UTC > BIOS-provided physical RAM map: > BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) > BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) > BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved) > BIOS-e820: 0000000000100000 - 000000002ffc0000 (usable) > BIOS-e820: 000000002ffc0000 - 000000002ffce000 (ACPI data) > BIOS-e820: 000000002ffce000 - 000000002fff0000 (ACPI NVS) > BIOS-e820: 000000002fff0000 - 0000000030000000 (reserved) > BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) > BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) > 0MB HIGHMEM available. > 767MB LOWMEM available. > found SMP MP-table at 000ff780 > Entering add_active_range(0, 0, 196544) 0 entries of 256 > used > Zone PFN ranges: > DMA 0 -> 4096 > Normal 4096 -> 196544 > HighMem 196544 -> 196544 > early_node_map[1] active PFN ranges > 0: 0 -> 196544 > On node 0 totalpages: 196544 > DMA zone: 32 pages used for memmap > DMA zone: 0 pages reserved > DMA zone: 4064 pages, LIFO batch:0 > Normal zone: 1503 pages used for memmap > Normal zone: 190945 pages, LIFO batch:31 > HighMem zone: 0 pages used for memmap > DMI 2.3 present. > Using APIC driver default > ACPI: RSDP 000F88C0, 0014 (r0 ACPIAM) > ACPI: RSDT 2FFC0000, 0030 (r1 A M I OEMRSDT 3000807 MSFT > 97) > ACPI: FACP 2FFC0200, 0084 (r2 A M I OEMFACP 3000807 MSFT > 97) > ACPI: DSDT 2FFC0400, 3CF8 (r1 12345 12345123 123 INTL > 20051117) > ACPI: FACS 2FFCE000, 0040 > ACPI: APIC 2FFC0390, 006C (r1 A M I OEMAPIC 3000807 MSFT > 97) > ACPI: OEMB 2FFCE040, 0060 (r1 A M I AMI_OEM 3000807 MSFT > 97) > ACPI: PM-Timer IO Port: 0x808 > ACPI: Local APIC address 0xfee00000 > ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) > Processor #0 15:2 APIC version 20 > ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled) > ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) > ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) > ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) > IOAPIC[0]: apic_id 1, version 3, address 0xfec00000, GSI > 0-23 > ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) > ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) > ACPI: IRQ0 used by override. > ACPI: IRQ2 used by override. > ACPI: IRQ9 used by override. > Enabling APIC mode: Flat. Using 1 I/O APICs > Using ACPI (MADT) for SMP configuration information > Allocating PCI resources starting at 40000000 (gap: > 30000000:cec00000) > Built 1 zonelists. Total pages: 195009 > Kernel command line: > root=/dev/disk/by-id/scsi-SATA_Maxtor_6Y080L0_Y2SDQ76E-part8 > vga=0x314 resume=/dev/sda7 splash=silent pci=routeirq > bootsplash: silent mode. > mapped APIC to ffffd000 (fee00000) > mapped IOAPIC to ffffc000 (fec00000) > Enabling fast FPU save and restore... done. > Enabling unmasked SIMD FPU exception support... done. > Initializing CPU#0 > PID hash table entries: 4096 (order: 12, 16384 bytes) > Detected 1996.321 MHz processor. > Console: colour dummy device 80x25 > Dentry cache hash table entries: 131072 (order: 7, 524288 > bytes) > Inode-cache hash table entries: 65536 (order: 6, 262144 > bytes) > Memory: 771304k/786176k available (1825k kernel code, > 14360k reserved, 764k data, 228k init, 0k highmem) > virtual kernel memory layout: > fixmap : 0xffdf4000 - 0xfffff000 (2092 kB) > pkmap : 0xff800000 - 0xffc00000 (4096 kB) > vmalloc : 0xf0800000 - 0xff7fe000 ( 239 MB) > lowmem : 0xc0000000 - 0xeffc0000 ( 767 MB) > .init : 0xc038e000 - 0xc03c7000 ( 228 kB) > .data : 0xc02c86ed - 0xc0387964 ( 764 kB) > .text : 0xc0100000 - 0xc02c86ed (1825 kB) > Checking if this processor honours the WP bit even in > supervisor mode... Ok. > Calibrating delay using timer specific routine.. 3998.69 > BogoMIPS (lpj=7997387) > Security Framework v1.0.0 initialized > Mount-cache hash table entries: 512 > CPU: After generic identify, caps: bfebfbff 00000000 > 00000000 00000000 00004400 00000000 00000000 > CPU: Trace cache: 12K uops, L1 D cache: 8K > CPU: L2 cache: 128K > CPU: Hyper-Threading is disabled > CPU: After all inits, caps: bfebfbff 00000000 00000000 > 0000b080 00004400 00000000 00000000 > Intel machine check architecture supported. > Intel machine check reporting enabled on CPU#0. > CPU0: Intel P4/Xeon Extended MCE MSRs (12) available > CPU0: Thermal monitoring enabled > Compat vDSO mapped to ffffe000. > Checking 'hlt' instruction... OK. > SMP alternatives: switching to UP code > Freeing SMP alternatives: 12k freed > Unpacking initramfs... done > Freeing initrd memory: 4019k freed > ACPI: Core revision 20070126 > Parsing all Control Methods: > Table [DSDT](id 0001) - 655 Objects with 64 Devices 180 > Methods 32 Regions > tbxface-0587 [00] tb_load_namespace : ACPI Tables > successfully acquired > evxfevnt-0091 [00] enable : Transition to > ACPI mode successful > CPU0: Intel(R) Celeron(R) CPU 2.00GHz stepping 07 > Total of 1 processors activated (3998.69 BogoMIPS). > ENABLING IO-APIC IRQs > ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 > Brought up 1 CPUs > Booting paravirtualized kernel on bare hardware > NET: Registered protocol family 16 > ACPI: bus type pci registered > PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=1 > PCI: Using configuration type 1 > Setting up standard PCI resources > evgpeblk-0956 [00] ev_create_gpe_block : GPE 00 to 0F > [_GPE] 2 regs on int 0x9 > evgpeblk-1052 [00] ev_initialize_gpe_bloc: Found 6 Wake, > Enabled 1 Runtime GPEs in this block > Completing Region/Field/Buffer/Package > initialization:..................................................................................................................... > Initialized 30/32 Regions 33/33 Fields 40/40 Buffers 14/15 > Packages (664 nodes) > Initializing Device/Processor/Thermal objects by executing > _INI methods: > Executed 0 _INI methods requiring 0 _STA executions > (examined 71 objects) > ACPI: Interpreter enabled > ACPI: (supports S0 S1 S3 S4 S5) > ACPI: Using IOAPIC for interrupt routing > ACPI: PCI Root Bridge [PCI0] (0000:00) > PCI: Probing PCI hardware (bus 00) > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] > ACPI: PCI Interrupt Routing Table > [\_SB_.PCI0.P0P1._PRT] > ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 > 14 15) > ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 > 14 15) > ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 > 14 15) > ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 > 15) *0, disabled. > ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 > 15) *0, disabled. > ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 > 15) *0, disabled. > ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 > 15) *0, disabled. > ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 > 15) *0, disabled. > Linux Plug and Play Support v0.97 (c) Adam Belay > pnp: PnP ACPI init > ACPI: bus type pnp registered > pnp: PnP ACPI: found 15 devices > ACPI: ACPI bus type pnp unregistered > PnPBIOS: Disabled by ACPI PNP > PCI: Using ACPI for IRQ routing > PCI: Routing PCI interrupts for all devices because > "pci=routeirq" specified > ACPI: PCI Interrupt 0000:00:09.0[A] -> GSI 17 (level, > low) -> IRQ 16 > ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 20 (level, > low) -> IRQ 17 > ACPI: PCI Interrupt 0000:00:0f.1[A] -> GSI 20 (level, > low) -> IRQ 17 > ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 21 (level, > low) -> IRQ 18 > ACPI: PCI Interrupt 0000:00:10.1[A] -> GSI 21 (level, > low) -> IRQ 18 > ACPI: PCI Interrupt 0000:00:10.2[B] -> GSI 21 (level, > low) -> IRQ 18 > ACPI: PCI Interrupt 0000:00:10.3[B] -> GSI 21 (level, > low) -> IRQ 18 > ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 21 (level, > low) -> IRQ 18 > ACPI: PCI Interrupt 0000:00:11.5[C] -> GSI 22 (level, > low) -> IRQ 19 > ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 23 (level, > low) -> IRQ 20 > ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, > low) -> IRQ 21 > ACPI: RTC can wake from S4 > pnp: 00:0a: ioport range 0xa00-0xa0f has been reserved > pnp: 00:0a: ioport range 0x290-0x29f has been reserved > pnp: 00:0a: ioport range 0xa20-0xa2f has been reserved > pnp: 00:0a: ioport range 0xa30-0xa3f has been reserved > pnp: 00:0a: ioport range 0xa40-0xa4f has been reserved > pnp: 00:0c: iomem range 0xfec00000-0xfec00fff could not be > reserved > pnp: 00:0c: iomem range 0xfee00000-0xfee00fff could not be > reserved > pnp: 00:0e: iomem range 0x0-0x9ffff could not be reserved > pnp: 00:0e: iomem range 0xc0000-0xcffff could not be > reserved > pnp: 00:0e: iomem range 0xe0000-0xfffff could not be > reserved > pnp: 00:0e: iomem range 0x100000-0x2fffffff could not be > reserved > Time: tsc clocksource has been installed. > PCI: Bridge: 0000:00:01.0 > IO window: a000-cfff > MEM window: ff500000-ff5fffff > PREFETCH window: d5f00000-f5efffff > PCI: Setting latency timer of device 0000:00:01.0 to 64 > NET: Registered protocol family 2 > IP route cache hash table entries: 32768 (order: 5, 131072 > bytes) > TCP established hash table entries: 131072 (order: 8, > 1572864 bytes) > TCP bind hash table entries: 65536 (order: 7, 524288 bytes) > TCP: Hash tables configured (established 131072 bind 65536) > TCP reno registered > Machine check exception polling timer started. > audit: initializing netlink socket (disabled) > audit(1223578100.496:1): initialized > Total HugeTLB memory allocated, 0 > VFS: Disk quotas dquot_6.5.1 > Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) > io scheduler noop registered > io scheduler anticipatory registered > io scheduler deadline registered > io scheduler cfq registered (default) > PCI: VIA PCI bridge detected. Disabling DAC. > PCI: Bypassing VIA 8237 APIC De-Assert Message > Boot video device is 0000:01:00.0 > vesafb: framebuffer at 0xe8000000, mapped to 0xf0880000, > using 3750k, total 16384k > vesafb: mode is 800x600x16, linelength=1600, pages=16 > vesafb: protected mode interface info at c000:5781 > vesafb: pmi: set display start = c00c5815, set palette = > c00c5861 > vesafb: pmi: ports = c010 c016 c054 c038 c03c c05c c000 > c004 c0b0 c0b2 c0b4 > vesafb: scrolling: redraw > vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 > bootsplash 3.1.6-2004/03/31: looking for picture... > bootsplash: silentjpeg size 78734 bytes > bootsplash: ...found (800x600, 27773 bytes, v3). > Console: switching to colour frame buffer device 96x33 > fb0: VESA VGA frame buffer device > isapnp: Scanning for PnP cards... > Switched to NOHz mode on CPU #0 > isapnp: No Plug & Play device found > Real Time Clock Driver v1.12ac > Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ > sharing enabled > serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A > serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A > 00:07: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A > 00:0d: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A > ACPI: PCI Interrupt 0000:00:09.0[A] -> GSI 17 (level, > low) -> IRQ 16 > ACPI: PCI interrupt for device 0000:00:09.0 disabled > Floppy drive(s): fd0 is 1.44M > FDC 0 is a post-1991 82077 > PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at > 0x60,0x64 irq 1,12 > serio: i8042 KBD port at 0x60,0x64 irq 1 > serio: i8042 AUX port at 0x60,0x64 irq 12 > mice: PS/2 mouse device common for all mice > input: AT Translated Set 2 keyboard as /class/input/input0 > input: PC Speaker as /class/input/input1 > input: ImPS/2 Generic Wheel Mouse as /class/input/input2 > NET: Registered protocol family 1 > Using IPI No-Shortcut mode > Freeing unused kernel memory: 228k freed > ACPI: Processor [CPU1] (supports 16 throttling states) > ACPI Exception (processor_core-0787): AE_NOT_FOUND, > Processor Device is not present [20070126] > ACPI Exception (processor_core-0787): AE_NOT_FOUND, > Processor Device is not present [20070126] > ACPI Exception (processor_core-0787): AE_NOT_FOUND, > Processor Device is not present [20070126] > ACPI: Thermal Zone [THRM] (30 C) > SCSI subsystem initialized > libata version 3.00 loaded. > sata_via 0000:00:0f.0: version 2.2 > ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 20 (level, > low) -> IRQ 17 > sata_via 0000:00:0f.0: routed to hard irq line 5 > scsi0 : sata_via > scsi1 : sata_via > ata1: SATA max UDMA/133 cmd 0x0001ec00 ctl 0x0001e882 bmdma > 0x0001e400 irq 17 > ata2: SATA max UDMA/133 cmd 0x0001e800 ctl 0x0001e482 bmdma > 0x0001e408 irq 17 > ata1: SATA link down 1.5 Gbps (SStatus 0 SControl 300) > ata2: SATA link down 1.5 Gbps (SStatus 0 SControl 300) > pata_via 0000:00:0f.1: version 0.3.1 > ACPI: PCI Interrupt 0000:00:0f.1[A] -> GSI 20 (level, > low) -> IRQ 17 > scsi2 : pata_via > scsi3 : pata_via > ata3: PATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma > 0x0001fc00 irq 14 > ata4: PATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma > 0x0001fc08 irq 15 > ata3.00: ATAPI: SONY CD-RW CRX320EE, RYK3, max UDMA/33 > ata3.00: configured for UDMA/33 > ata4.00: ATA-7: Maxtor 6Y080L0, YAR41BW0, max UDMA/133 > ata4.00: 160086528 sectors, multi 16: LBA > ata4.00: configured for UDMA/133 > scsi 2:0:0:0: CD-ROM SONY CD-RW CRX320EE > RYK3 PQ: 0 ANSI: 5 > scsi 3:0:0:0: Direct-Access ATA Maxtor 6Y080L0 > YAR4 PQ: 0 ANSI: 5 > BIOS EDD facility v0.16 2004-Jun-25, 1 devices found > usbcore: registered new interface driver usbfs > usbcore: registered new interface driver hub > usbcore: registered new device driver usb > USB Universal Host Controller Interface driver v3.0 > ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 21 (level, > low) -> IRQ 18 > uhci_hcd 0000:00:10.0: UHCI Host Controller > uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus > number 1 > uhci_hcd 0000:00:10.0: irq 18, io base 0x0000dc00 > usb usb1: new device found, idVendor=0000, idProduct=0000 > usb usb1: new device strings: Mfr=3, Product=2, > SerialNumber=1 > usb usb1: Product: UHCI Host Controller > usb usb1: Manufacturer: Linux 2.6.22.5-31-default uhci_hcd > usb usb1: SerialNumber: 0000:00:10.0 > usb usb1: configuration #1 chosen from 1 choice > hub 1-0:1.0: USB hub found > hub 1-0:1.0: 2 ports detected > sd 3:0:0:0: [sda] 160086528 512-byte hardware sectors > (81964 MB) > sd 3:0:0:0: [sda] Write Protect is off > sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00 > sd 3:0:0:0: [sda] Write cache: enabled, read cache: > enabled, doesn't support DPO or FUA > sd 3:0:0:0: [sda] 160086528 512-byte hardware sectors > (81964 MB) > sd 3:0:0:0: [sda] Write Protect is off > sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00 > sd 3:0:0:0: [sda] Write cache: enabled, read cache: > enabled, doesn't support DPO or FUA > sda:<6>ACPI: PCI Interrupt 0000:00:10.1[A] -> GSI > 21 (level, low) -> IRQ 18 > uhci_hcd 0000:00:10.1: UHCI Host Controller > uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus > number 2 > uhci_hcd 0000:00:10.1: irq 18, io base 0x0000d880 > usb usb2: new device found, idVendor=0000, idProduct=0000 > usb usb2: new device strings: Mfr=3, Product=2, > SerialNumber=1 > usb usb2: Product: UHCI Host Controller > usb usb2: Manufacturer: Linux 2.6.22.5-31-default uhci_hcd > usb usb2: SerialNumber: 0000:00:10.1 > usb usb2: configuration #1 chosen from 1 choice > hub 2-0:1.0: USB hub found > hub 2-0:1.0: 2 ports detected > sda1 sda2 < sda5 sda6 sda7<6>ACPI: PCI Interrupt > 0000:00:10.2[B] -> GSI 21 (level, low) -> IRQ 18 > uhci_hcd 0000:00:10.2: UHCI Host Controller > uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus > number 3 > uhci_hcd 0000:00:10.2: irq 18, io base 0x0000d800 > usb usb3: new device found, idVendor=0000, idProduct=0000 > usb usb3: new device strings: Mfr=3, Product=2, > SerialNumber=1 > usb usb3: Product: UHCI Host Controller > usb usb3: Manufacturer: Linux 2.6.22.5-31-default uhci_hcd > usb usb3: SerialNumber: 0000:00:10.2 > usb usb3: configuration #1 chosen from 1 choice > hub 3-0:1.0: USB hub found > hub 3-0:1.0: 2 ports detected > sda8 > sda3 > sd 3:0:0:0: [sda] Attached SCSI disk > ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 21 (level, > low) -> IRQ 18 > ehci_hcd 0000:00:10.4: EHCI Host Controller > ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus > number 4 > ehci_hcd 0000:00:10.4: irq 18, io mem 0xff6ffc00 > ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver > 10 Dec 2004 > usb usb4: new device found, idVendor=0000, idProduct=0000 > usb usb4: new device strings: Mfr=3, Product=2, > SerialNumber=1 > usb usb4: Product: EHCI Host Controller > usb usb4: Manufacturer: Linux 2.6.22.5-31-default ehci_hcd > usb usb4: SerialNumber: 0000:00:10.4 > usb usb4: configuration #1 chosen from 1 choice > hub 4-0:1.0: USB hub found > hub 4-0:1.0: 8 ports detected > ACPI: PCI Interrupt 0000:00:10.3[B] -> GSI 21 (level, > low) -> IRQ 18 > uhci_hcd 0000:00:10.3: UHCI Host Controller > uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus > number 5 > uhci_hcd 0000:00:10.3: irq 18, io base 0x0000d480 > usb usb5: new device found, idVendor=0000, idProduct=0000 > usb usb5: new device strings: Mfr=3, Product=2, > SerialNumber=1 > usb usb5: Product: UHCI Host Controller > usb usb5: Manufacturer: Linux 2.6.22.5-31-default uhci_hcd > usb usb5: SerialNumber: 0000:00:10.3 > usb usb5: configuration #1 chosen from 1 choice > hub 5-0:1.0: USB hub found > hub 5-0:1.0: 2 ports detected > swsusp: Basic memory bitmaps created > swsusp: Basic memory bitmaps freed > Attempting manual resume > kjournald starting. Commit interval 5 seconds > EXT3 FS on sda8, internal journal > EXT3-fs: mounted filesystem with ordered data mode. > scsi 2:0:0:0: Attached scsi generic sg0 type 5 > sd 3:0:0:0: Attached scsi generic sg1 type 0 > pci_hotplug: PCI Hot Plug PCI Core version: 0.5 > Linux agpgart interface v0.102 (c) Dave Jones > shpchp: Standard Hot Plug PCI Controller Driver version: > 0.4 > sr0: scsi3-mmc drive: 0x/52x writer cd/rw xa/form2 cdda > tray > Uniform CD-ROM driver Revision: 3.20 > sr 2:0:0:0: Attached scsi CD-ROM sr0 > agpgart: Detected VIA VT3314 chipset > agpgart: AGP aperture is 64M @ 0xf8000000 > via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald > Becker > ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 23 (level, > low) -> IRQ 20 > eth0: VIA Rhine II at 0x1ee00, 00:1e:90:da:01:08, IRQ 20. > eth0: MII PHY found at address 1, status 0x7849 advertising > 05e1 Link 0000. > rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 > rtc_cmos: probe of 00:02 failed with error -16 > parport_pc 00:09: reported by Plug and Play ACPI > parport0: PC-style at 0x378 (0x778), irq 7, dma 3 > [PCSPP,TRISTATE,COMPAT,ECP,DMA] > input: Power Button (FF) as /class/input/input3 > ACPI: Power Button (FF) [PWRF] > input: Sleep Button (CM) as /class/input/input4 > ACPI: Sleep Button (CM) [SLPB] > input: Power Button (CM) as /class/input/input5 > ACPI: Power Button (CM) [PWRB] > ACPI: PCI Interrupt 0000:00:11.5[C] -> GSI 22 (level, > low) -> IRQ 19 > PCI: Setting latency timer of device 0000:00:11.5 to 64 > Adding 1164640k swap on /dev/sda7. Priority:-1 extents:1 > across:1164640k > device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) > initialised: dm-devel@xxxxxxxxxx > loop: module loaded > kjournald starting. Commit interval 5 seconds > EXT3 FS on sda3, internal journal > EXT3-fs: mounted filesystem with ordered data mode. > fuse init (API version 7.8) > AppArmor: AppArmor initialized > audit(1223578115.496:2): type=1505 info="AppArmor > initialized" pid=1865 > powernow: This module only works with AMD K7 CPUs > NET: Registered protocol family 10 > lo: Disabled Privacy Extensions > Mobile IPv6 > ip6_tables: (C) 2000-2006 Netfilter Core Team > ip_tables: (C) 2000-2006 Netfilter Core Team > Netfilter messages via NETLINK v0.30. > nf_conntrack version 0.5.0 (6142 buckets, 49136 max) > [drm] Initialized drm 1.1.0 20060810 > ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, > low) -> IRQ 21 > [drm] Initialized radeon 1.27.0 20060524 on minor 0 > IA-32 Microcode Update Driver: v1.14a > <tigran@xxxxxxxxxxxxxxxxxxxx> > eth0: link down > ADDRCONF(NETDEV_UP): eth0: link is not ready > NET: Registered protocol family 17 > agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0. > agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode > agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode > [drm] Setting GART location based on new memory map > [drm] Loading R200 Microcode > [drm] writeback test succeeded in 1 usecs > audit(1223565563.957:3): audit_backlog_limit=320 old=64 by > auid=4294967295 res=1 > audit(1223565563.957:4): audit_pid=4039 old=0 by > auid=4294967295 > agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0. > agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode > agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode > [drm] Setting GART location based on new memory map > [drm] Loading R200 Microcode > [drm] writeback test succeeded in 1 usecs > agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0. > agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode > agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode > [drm] Setting GART location based on new memory map > [drm] Loading R200 Microcode > [drm] writeback test succeeded in 1 usecs > > Module Size Used by > ip6t_LOG 10496 7 > nf_conntrack_ipv6 22848 4 > xt_pkttype 5888 3 > ipt_LOG 9984 8 > xt_limit 6656 15 > snd_pcm_oss 50432 0 > snd_mixer_oss 20096 1 snd_pcm_oss > snd_seq 54452 0 > af_packet 29064 2 > microcode 15372 0 > firmware_class 13568 1 microcode > radeon 116228 2 > drm 79636 3 radeon > ip6t_REJECT 9216 3 > xt_tcpudp 7168 4 > ipt_REJECT 8448 3 > xt_state 6528 8 > iptable_mangle 6784 0 > iptable_nat 11140 0 > nf_nat 21912 1 iptable_nat > iptable_filter 6912 1 > ip6table_mangle 6656 0 > nf_conntrack_ipv4 14856 6 iptable_nat > nf_conntrack 61684 5 > nf_conntrack_ipv6,xt_state,iptable_nat,nf_nat,nf_conntrack_ipv4 > nfnetlink 9752 4 > nf_conntrack_ipv6,nf_nat,nf_conntrack_ipv4,nf_conntrack > ip_tables 16324 3 > iptable_mangle,iptable_nat,iptable_filter > ip6table_filter 6784 1 > ip6_tables 17476 3 > ip6t_LOG,ip6table_mangle,ip6table_filter > x_tables 18308 11 > ip6t_LOG,xt_pkttype,ipt_LOG,xt_limit,ip6t_REJECT,xt_tcpudp,ipt_REJECT,xt_state,iptable_nat,ip_tables,ip6_tables > ipv6 268152 17 > nf_conntrack_ipv6,ip6t_REJECT,ip6table_mangle > apparmor 40736 0 > nls_iso8859_1 8192 1 > nls_cp437 9856 1 > vfat 16128 1 > fat 52380 1 vfat > fuse 45460 4 > loop 21636 0 > dm_mod 56880 0 > snd_via82xx 31640 1 > gameport 18312 1 snd_via82xx > button 12432 0 > snd_ac97_codec 97060 1 snd_via82xx > ac97_bus 6272 1 snd_ac97_codec > snd_pcm 82564 3 > snd_pcm_oss,snd_via82xx,snd_ac97_codec > snd_timer 26756 2 snd_seq,snd_pcm > snd_page_alloc 13960 2 snd_via82xx,snd_pcm > parport_pc 40764 0 > snd_mpu401_uart 12416 1 snd_via82xx > snd_rawmidi 28416 1 snd_mpu401_uart > parport 37832 1 parport_pc > rtc_cmos 12064 0 > snd_seq_device 12172 2 snd_seq,snd_rawmidi > i2c_viapro 12436 0 > via_rhine 27912 0 > via_agp 13952 1 > i2c_core 27520 1 i2c_viapro > rtc_core 23048 1 rtc_cmos > sr_mod 19492 0 > rtc_lib 7040 1 rtc_core > shpchp 35092 0 > mii 9344 1 via_rhine > snd 58164 12 > snd_pcm_oss,snd_mixer_oss,snd_seq,snd_via82xx,snd_ac97_codec,snd_pcm,snd_timer,snd_mpu401_uart,snd_rawmidi,snd_seq_device > agpgart 35764 2 drm,via_agp > soundcore 11460 1 snd > cdrom 37020 1 sr_mod > pci_hotplug 33216 1 shpchp > sg 37036 0 > ehci_hcd 34956 0 > sd_mod 31104 7 > uhci_hcd 27024 0 > usbcore 123372 3 ehci_hcd,uhci_hcd > edd 12996 0 > ext3 131848 2 > mbcache 12292 1 ext3 > jbd 68148 1 ext3 > fan 9220 0 > pata_via 15620 6 > sata_via 15364 0 > libata 136776 2 pata_via,sata_via > scsi_mod 140376 4 sr_mod,sg,sd_mod,libata > thermal 19848 0 > processor 40744 1 thermal
