Tom Download from http://linmodems.technion.ac.il/packages/smartlink/ the package SLMODEMD.gcc4.2.tar.gz having a compiled slmodemd. Unpack under Linux with: $ tar zxf SLMODEMD.gcc4.2.tar.gz and read instructions therein. But briefly, the modem is setup with command: sudo slmodemd -c USA --alsa modem:1 reporting dynamic creation of ports: /dev/ttySL0 --> /dev/pts/N , with N some number Read DOCs/Smartlink.txt and Modem/DOCs/YourSystem.txt for follow through guidance. Driver snd-intel8x0m occassionally dies when loaded. Just unload and reload: $ sudo modprobe -r snd-intel8x0m $ sudo modprobe snd-intel8x0m Then again activate: $ sudo slmodemd -c USA --alsa modem:1 The difference between SIL27 and SIL2f is not significant MarvS On Mon, Sep 29, 2008 at 10:08 PM, Thomas Stolee <indigo228@xxxxxxxxx> wrote: > Reran scanModem and here's ModemData.txt > Only plain text email is forwarded by the Discuss@xxxxxxxxxxxxx List Server, > as HTML can contain viruses. Use as the email Subject Line: > YourName, YourCountry kernel 2.6.24-19-generic > With this Subject Line cogent experts will be alerted, and useful > case names left in the Archive. > YourCountry will enable Country specific guidance. Linux experts in > YourCountry > can be found through: http://www.linux.org/groups/index.html. > They will know your Country's modem code, which may be essential for > dialup service. > Responses from Discuss@xxxxxxxxxxxxx are sometimes blocked by an > Internet Provider mail filters. > So in a day, also check the Archived responses at http://www.linmodems.org > -------------------------- System information ---------------------------- > CPU=i686, > Linux version 2.6.24-19-generic (buildd@palmer) (gcc version 4.2.3 > (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Wed Jun 18 14:43:41 UTC 2008 > scanModem update of: 2008_08_26 > > There are no blacklisted modem drivers in /etc/modprobe* files > Attached USB devices are: > ID 0951:1603 Kingston Technology > ID 0572:1300 Conexant Systems (Rockwell), Inc. > > For candidate card in slot 00:1f.6, firmware information and bootup > diagnostics are: > PCI slot PCI ID SubsystemID Name > ---------- --------- --------- -------------- > 00:1f.6 8086:24c6 1179:0001 Modem: Intel Corporation 82801DB/DBL/DBM > > Modem interrupt assignment and sharing: > 11: 16808 XT-PIC-XT uhci_hcd:usb2, uhci_hcd:usb3, > ehci_hcd:usb4, wifi0, yenta, Intel 82801DB-ICH4, eth0, Intel > 82801DB-ICH4 Modem > --- Bootup diagnostics for card in PCI slot 00:1f.6 ---- > [ 17.324901] PCI: Enabling device 0000:00:1f.6 (0000 -> 0001) > [ 17.325128] ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> > GSI 11 (level, low) -> IRQ 11 > [ 17.325139] ACPI: PCI interrupt for device 0000:00:1f.6 disabled > [ 1272.042084] ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> > GSI 11 (level, low) -> IRQ 11 > [ 1272.042116] PCI: Setting latency timer of device 0000:00:1f.6 to 64 > > The PCI slot 00:1f.6 of the modem card may be disabled early in > a bootup process, but then enabled later. If modem drivers load > but the modem is not responsive, read DOCs/Bootup.txt about possible fixes. > Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx > if help is needed. > > > > ===== Advanced Linux Sound Architecture (ALSA) diagnostics ===== > The ALSA packages provide audio support and also drivers for some modems. > ALSA diagnostics are written during bootup to /proc/asound/ folders. > > The ALSA verion is 1.0.16 > The modem cards detected by "aplay -l" are: > card 1: Modem [Intel 82801DB-ICH4 Modem], device 0: Intel ICH - Modem > [Intel 82801DB-ICH4 Modem - Modem] > > The /proc/asound/pcm file reports: > ----------------------- > 00-04: Intel ICH - IEC958 : Intel 82801DB-ICH4 - IEC958 : playback 1 > 00-03: Intel ICH - ADC2 : Intel 82801DB-ICH4 - ADC2 : capture 1 > 00-02: Intel ICH - MIC2 ADC : Intel 82801DB-ICH4 - MIC2 ADC : capture 1 > 00-01: Intel ICH - MIC ADC : Intel 82801DB-ICH4 - MIC ADC : capture 1 > 00-00: Intel ICH : Intel 82801DB-ICH4 : playback 1 : capture 1 > 01-00: Intel ICH - Modem : Intel 82801DB-ICH4 Modem - Modem : playback > 1 : capture 1 > > about /proc/asound/cards: > ------------------------ > 0 [I82801DBICH4 ]: ICH4 - Intel 82801DB-ICH4 > Intel 82801DB-ICH4 with STAC9750,51 at irq 11 > 1 [Modem ]: ICH-MODEM - Intel 82801DB-ICH4 Modem > Intel 82801DB-ICH4 Modem at irq 11 > Lines in: /proc/asound/card1/codec97#0/mc97#1-1+regs > ------------------------------- > 0:7c = 5349 and 0:7e = 4c2f > are translated from hexadecimal code into the modem chip identifier: SIL2f > > > The driver snd-intel8x0m with its dependent drivers: > snd_intel8x0m 18956 0 > snd_ac97_codec 101028 2 snd_intel8x0m,snd_intel8x0 > snd_pcm 78596 4 > snd_intel8x0m,snd_intel8x0,snd_ac97_codec,snd_pcm_oss > snd 56996 18 > snd_intel8x0m,snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_dummy,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device > snd_page_alloc 11400 3 snd_intel8x0m,snd_intel8x0,snd_pcm > ---------- > provide modem + audio support. > > === Finished firmware and bootup diagnostics, next deducing cogent software. === > > Predictive diagnostics for card in bus 00:1f.6: > Modem chipset detected on > NAME="Modem: Intel Corporation 82801DB/DBL/DBM " > CLASS=0703 > PCIDEV=8086:24c6 > SUBSYS=1179:0001 > IRQ=11 > SOFT=8086:24c6.MC97 > CodecArchived=SIL27 > CodecDiagnosed=SIL2f > CodecClass=SIL > IDENT=slmodemd > SLMODEMD_DEVICE=modem:1 > Driver=snd-intel8x0m > > For candidate modem in: 00:1f.6 > 0703 Modem: Intel Corporation 82801DB/DBL/DBM > Primary device ID: 8086:24c6 > Subsystem PCI_id 1179:0001 > Softmodem codec or chipset from diagnostics: SIL2f, an LSI/AgereSystems type > from Archives: SIL27 > Diagnostics and the Archive data DISAGREE > > > Support type needed or chipset: slmodemd > > An ALSA (Advanced Linux Sound Architecture) modem driver: snd-intel8x0m > provides Low Level support enabling contact with the modem hardware. > For all BUT Conexant chip soft modems (using hsfmodem software) > complementary High Level support is through a Smartlink utility: slmodemd > > Download from http://linmodems.technion.ac.il/packages/smartlink/ > the package SLMODEMD.gcc4.2.tar.gz having a compiled slmodemd. Unpack > under Linux with: > $ tar zxf SLMODEMD.gcc4.2.tar.gz > and read instructions therein. But briefly, the modem is setup with command: > sudo slmodemd -c YOUR_COUNTRY --alsa modem:1 > reporting dynamic creation of ports: > /dev/ttySL0 --> /dev/pts/N , with N some number > Read DOCs/Smartlink.txt and Modem/DOCs/YourSystem.txt for follow > through guidance. > > ----------------end Softmodem section -------------- > > Writing DOCs/Intel.txt > Writing DOCs/Smartlink.txt > ============ end Smartlink section ===================== > > > Predictive diagnostics for card in bus 002: > Modem chipset detected on > SLOT="Bus 002 Device 002:" > NAME="Conexant Systems (Rockwell), Inc. " > bus=002 > USBmodemID=0572:1300 > IDENT=hsfmodem > Driver=hsfmodem > > For candidate modem in: 002 > 0703 Conexant Systems (Rockwell), Inc. > Primary device ID: 8086:24c60572:1300 > Support type needed or chipset: hsfmodem > > > > For owners of a Dell PCs with Conexant HSF modems, a driver source > package with full speed enabled is available, but requires driver > compiling. Read DOCs/Conexant.txt > > > Start at http://www.linuxant.com/drivers/hsf/downloads-license.php to find the > hsfmodem package matching your System. For several Linux distros, there are > precompiled drivers matched to specific kernels. These have within the FileName, > your KernelVersion: 2.6.24_19_generic > They can be found through > http://www.linuxant.com/drivers/hsf/full/downloads.php > A more precise location may be given a few paragraphs below. > If an EXACT Match with your your KernelVersion is not found, one of the > "Generic packages with source" near the bottom of the page must be used. > Downloaded packages must be moved into the Linux partition (home folder is OK) > and unzipped with: > unzip hsf*.zip > The installation command for a .deb suffic packages is, with root/adm > permission: > sudo dpkg -i hsf*.deb > while for .rpm suffix it is, with: > rpm -i hsf*.rpm > From http://www.linuxant.com/drivers/hsf/full/downloads-ubuntu-x86.php > download hsfmodem-7.68.00.12full_k2.6.24_19_generic_ubuntu_i386.deb.zip > Under Linux unpack with: > $ unzip hsfmodem*.zip > Then install with: > $ sudo dpkg -i hsfmodem*.deb > Subsequently, the modem should be found with > $ sudo wvdialconf /etc/wvdial.conf > Edit in your personal information with: > $ sudo gedit /etc/wvdial.conf > and try dialing out with: > $ sudo wvdial. > See DOCs/Testing.txt for details. > > Read DOCs/Conexant.txt > > Writing DOCs/Conexant.txt > > > Completed candidate modem analyses. > > The base of the UDEV device file system is: /dev/.udev > > Versions adequately match for the compiler installed: 4.2.3 > and the compiler used in kernel assembly: 4.2.3 > > > > Minimal compiling resources appear complete: > make utility - /usr/bin/make > Compiler version 4.2 > linuc_headers base folder /lib/modules/2.6.24-19-generic/build > > However some compilations and executable functions may need additional files, > in the FileNames.h (so called kernel "h"eaders) collection installed > in /usr/include/ . > For martian_modem, additional required packages are needed. The also > required headers of package libc6 are commonly installed by default. > Compiling hsfmodem drivers does require linux-libc-dev and libc6-dev > packages, for kernels 2.6.24 and later versions. > In not included on your install CD, search for them at > http://packages.ubuntu.com > or comparable Repository for other Linux distros. > When compiling ALSA drivers, the utility "patch" will also be needed. > > > > > If a driver compilation fails, with message including some lack of > some FileName.h (stdio.h for example), then > Some additional kernel-header files need installation to /usr/include. > The minimal additional packages are libc6-dev > and any of its dependents, under Ubuntu linux-libc-dev > > If an alternate ethernet connection is available, > $ apt-get update > $ apt-get -s install linux-kernel-devel > will install needed packages. > For Debian/Ubuntu related distributions, run the following command to > display the needed package list: > > Otherwise packages have to be found through http://packages.ubuntu.com > Once downloaded and transferred into a Linux partition, > they can be installed alltogether with: > $ sudo dpkg -i *.deb > > > Checking pppd properties: > -rwsr-xr-- 1 root dip 269256 2007-10-04 14:57 /usr/sbin/pppd > > In case of an "error 17" "serial loopback" problem, see: > http://linmodems.technion.ac.il/linmodems/archive-sixth/msg02637.html > > To enable dialout without Root permission do: > $ su - root (not for Ubuntu) > sudo chmod a+x /usr/sbin/pppd > or under Ubuntu related Linuxes > sudo chmod a+x /usr/sbin/pppd > > Checking settings of: /etc/ppp/options > asyncmap 0 > noauth > crtscts > lock > hide-password > modem > proxyarp > lcp-echo-interval 30 > lcp-echo-failure 4 > noipx > > In case of a message like: > Warning: Could not modify /etc/ppp/pap-secrets: Permission denied > see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html > > Read Modem/DOCs/YourSystem.txt concerning other COMM channels: ath0 eth0 wifi0 > Which can interfere with Browser naviagation. > > Don't worry about the following, it is for experts should trouble > shooting be necessary. > ========================================================== > > Checking for modem support lines: > -------------------------------------- > /device/modem symbolic link: > slmodemd created symbolic link /dev/ttySL0: > Within /etc/udev/ files: > > Within /etc/modprobe.conf files: > /etc/modprobe.d/alsa-base:options snd-atiixp-modem index=-2 > /etc/modprobe.d/alsa-base:options snd-via82xx-modem index=-2 > /etc/modprobe.d/blacklist-modem:# Uncomment these entries in order to > blacklist unwanted modem drivers > /etc/modprobe.d/blacklist-modem:# blacklist snd-atiixp-modem > /etc/modprobe.d/blacklist-modem:# blacklist snd-via82xx-modem > Within any ancient /etc/devfs files: > > Within ancient kernel 2.4.n /etc/module.conf files: > > --------- end modem support lines -------- >
