Brad,
Run:
$ ./scanModem fake 8086:2486 1014:0223
any there will be a report including the output below,
But the main problem is that your modem PCI slot/bus is being
disabled because of resource competitions
Try detaching as many external attachements as possible and rerun scanModem
Report back. Usually we can this sort of problem through.
MarvS
scanModem maintainer
PCIDEV=8086:2486
SUBSYS=1014:0223
IRQ=fake
SOFT=8086:2486.MC97
CodecArchived=SIL27
IDENT=slmodemd
SLMODEMD_DEVICE=modem:1
For candidate modem in: fake
FakeClass FakeName
Primary device ID: 8086:2486
Subsystem PCI_id 1014:0223
Softmodem codec or chipset from diagnostics:
from Archives: SIL27
Support type needed or chipset: slmodemd
An ALSA (Advanced Linux Sound Architecture) modem driver:
provides Low Level support enabling contact with the modem hardware.
For all BUT Conexant chip soft modems (using hsfmodem software)
complementary High Level support is through a Smartlink utility: slmodemd
Download from http://linmodems.technion.ac.il/packages/smartlink/
the package SLMODEMD.gcc4.2.tar.gz having a compiled slmodemd. Unpack
under Linux with:
$ tar zxf SLMODEMD.gcc4.2.tar.gz
and read instructions therein. But briefly, the modem is setup with command:
sudo slmodemd -c YOUR_COUNTRY --alsa modem:1
reporting dynamic creation of ports:
/dev/ttySL0 --> /dev/pts/N , with N some number
Read DOCs/Smartlink.txt and Modem/DOCs/YourSystem.txt for follow
through guidance.
On Thu, Sep 18, 2008 at 8:07 AM, Brad Miller <brad@xxxxxxxxxxxxxxxxxxxx> wrote:
> Hi,
>
> Newbie to linux (XUbuntu) trying to get internal pci modem to run.
>
> Attached is ModemData.txt.
>
> Appreciate any suggestions.
>
> Thanks
> Brad
