Hello!
I am Alexey from Rusia, I have Agere lucent Win modem
I have downloaded the recommended by Scanmodem driver
martian-full-20071011.tar.gz.
Then I`ve installed it as it was recomended in the file INSTALL:
make all
make install
modprobe martian_dev
martian_modem /dev/ttyLT0
Using KInternet I ring to provider, modem works write but a connection
doesn1t establish.
The write login is mts, password mts, number 88007072850
KInternet says:
SuSE Meta pppd (smpppd-ifcfg), Version 1.59 on host0.
Status is: disconnected
trying to connect to smpppd
connect to smpppd
Status is: disconnected
Status is: connecting
pppd[0]: Plugin passwordfd.so loaded.
pppd[0]: --> WvDial: Internet dialer version 1.54.0
pppd[0]: --> Initializing modem.
pppd[0]: --> Sending: ATM1
pppd[0]: ATM1
pppd[0]: OK
pppd[0]: --> Sending: ATX3
pppd[0]: ATX3
pppd[0]: OK
pppd[0]: --> Modem initialized.
pppd[0]: --> Sending: ATDP8,,8007072850
pppd[0]: --> Waiting for carrier.
pppd[0]: ATDP8,,8007072850
pppd[0]: CONNECT 48000 V42bis
pppd[0]: User Access Verification
pppd[0]: Username:
pppd[0]: --> Carrier detected. Waiting for prompt.
pppd[0]: User Access Verification
pppd[0]: Username:
pppd[0]: --> Looks like a login prompt.
pppd[0]: --> Sending: mts
pppd[0]: mts
pppd[0]: Password:
pppd[0]: --> Looks like a password prompt.
pppd[0]: --> Sending: (password)
pppd[0]: % Authentication failed.
pppd[0]: User Access Verification
pppd[0]: Username:
pppd[0]: --> Looks like a login prompt.
pppd[0]: --> Sending: mts
pppd[0]: mts
pppd[0]: Password:
pppd[0]: --> Looks like a password prompt.
pppd[0]: --> Sending: (password)
pppd[0]: % Authentication failed.
pppd[0]: --> Don't know what to do! Starting pppd and hoping for the best.
pppd[0]: Serial connection established.
pppd[0]: Renamed interface ppp0 to modem0
pppd[0]: Using interface modem0
Status is: connecting
pppd[0]: Connect: modem0 <--> /dev/ttyLT0
pppd[0]: Modem hangup
pppd[0]: Connection terminated.
Status is: disconnected
pppd[0] died: A modem hung up the phone (exit code 16)
The INSTALL recommends: For wvdial add "Check Carrier = No" line, I added in
some places
Listing of wvdial.conf:
[Dialer Defaults]
Check Carrier = No
Modem = /dev/modem
Check Carrier = No
Baud = 57600
Check Carrier = No
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2
Init3 =
Check Carrier = No
Area Code =
Phone = 0
Username =
Password =
Ask Password = 0
Dial Command = ATDT
Stupid Mode = 1
Compuserve = 0
Force Address =
Idle Seconds = 300
DialMessage1 =
DialMessage2 =
ISDN = 0
Auto DNS = 1
Check Carrier = No
I now don`t know what to do
THANK YOU VERY MUCH FOR ANY HELP!
