Hi, My BIOS have an option: IOAPIC Function [Enable/Disable] Is it enabled or disabled? If enables, which version of MPS Table Version I should use: [1.1/1.4] Thanks On Wed, Aug 13, 2008 at 2:50 PM, Fabrício Ceolin <fabceolin@xxxxxxxxx> wrote: > Hi Bjorn, > > Make sense combine pci=routeirq, pci=noacpi or noacpi options? > > At now, I'm trying the driver with ALSA15 suffix, with your > suggestions, but no success. > When I use pci=routeirq, the modem change the IRQ, but still IRQ > sharing with other device. > > Are there some way to hardcoded IRQs, changing sources files? > > I changed debug options on serial26.c, but the machine freeze before > any messages appears (I tryied to use the serial with command screen > /dev/ttyAGS3 57600) > > Thanks > On Wed, Aug 13, 2008 at 1:21 PM, Bjorn Wielens <uniacke1@xxxxxxxx> wrote: >> Hi Fabricio, >> Hmm.. You make an interesting point when you say it is >> caused by IRQ sharing... >> There are a couple of approaches you can take: >> 1. Move the modem card to another slot in the PC, if >> possible... though it sounds like you've already tried >> that. >> 2. Try adding 'pci=routeirq' to the kernel argument >> line at boot, >> or 3. add 'pci=noacpi' to the kernel argument line at >> boot. >> The first may or may not change the modem's IRQ, >> depending on your BIOS. >> The second is a special IRQ setting for PCI devices >> that may alleviate the problem, >> and the fourth tells the kernel NOT to use ACPI to >> configure the devices on the PCI bus... so hopefully >> it's smart enough not to set up the modem to share an >> IRQ. >> If that still doesn't work, you may be able to do it >> with 'noacpi' on the kernel argument line, but shut >> down/suspend etc. may not work as expected when this >> option is enabled. If that STILL fails, try booting >> your kernel in 'failsafe' mode to see if it still >> hangs. >> >> Also note that the Agrsm driver is VERY picky about >> ALSA versions... If your kernel shipped with ALSA >> 1.0.15 or below, I would suggest reverting to that >> version and using the package with the ALSA15 suffix, >> which may also help the issue. I've had kernel OOPses >> from stray ALSA drivers in /lib/modules that were of a >> different version. >> Best, >> Bjorn. >> >> --- Fabrício Ceolin <fabceolin@xxxxxxxxx> wrote: >> >>> Hi Bjorn, >>> >>> Thanks! >>> >>> On Wed, Aug 13, 2008 at 12:10 PM, Bjorn Wielens >>> <uniacke1@xxxxxxxx> wrote: >>> > Hi, >>> > I've had the lockup myself a few times, but I >>> can't >>> > figure out what the problem was.. and since then >>> it's >>> > gone away, so I can't re-create it. >>> > >>> If you want, I can give you a ssh login! (But we >>> must chat with >>> instant messager, because PC freeze when drivers up) >>> >>> > Which driver tarball did you use? >>> > You were right that you need to patch the >>> > snd-hda-intel module, though I don't know if it >>> will >>> > be used in your case. >>> > >>> My kernel is 2.6.22, with alsa 1.0.17 instaled after >>> (on >>> /lib/modules/2.6.22-14-generic/updates), so I used >>> >> http://linmodems.technion.ac.il/packages/ltmodem/11c11040/agrsm-HDA-20080721.tar.bz2 >>> >>> Remember that my modem is a 11c1:0620! >>> >>> > Is this a PCI card or a modem that is attached to >>> your >>> > sound card? >>> > >>> This is a PCI Card. >>> >>> > Finally, did you mean to say '/dev/ttyAGS3' >>> instead of >>> > '/etc/ttyAGS3'? >>> > >>> You are right. I mean to say /dev/ttyAGS3. >>> >>> >>> > Bjorn. >>> > >>> > >>> With freeze, I'm tring to use a old version driver >>> >> http://linmodems.technion.ac.il/packages/ltmodem/sv92/agrsm-20080203.tar.gz >>> but my two PCI slot sharing IRQ with onboard >>> hardware (ethernet and >>> sound). When I disable a ethernet or sound (modem on >>> slot1 or slot2, >>> respectively), the modem works. >>> >>> There are any ideas for getting my modem work >>> together all hardware? >>> >>> >>> >>> > >>> > --- Fabrício Ceolin <fabceolin@xxxxxxxxx> wrote: >>> > >>> >> Hi, >>> >> >>> >> Thanks! >>> >> I tried your instructions, but patching hda_intel >>> >> was necessary to >>> >> compile the driver. >>> >> >>> >> My machine freeze when I tried do use >>> /etc/ttyAGR3 >>> >> >>> >> :( >>> >> >>> >> >>> >> On Thu, Aug 7, 2008 at 7:37 PM, Marvin Stodolsky >>> >> <marvin.stodolsky@xxxxxxxxx> wrote: >>> >> > Fabrico >>> >> > >>> >> > Try the newer code package >>> >> > At >>> >> >>> > >>> >> http://linmodems.technion.ac.il/packages/ltmodem/11c11040/ >>> >> > Compiling resources for a driver module pair: >>> >> agrmodem.ko + agrserial.ko >>> >> > Use the agrsm-HDA-20080721-ALSA15.tar.bz2 or >>> >> agrsm-HDA-20080721.tar.bz2 >>> >> > Read the agrsm_howto.txt. for the 11c1:0620 >>> >> modem, you don't need >>> >> > to bother with the snd-hda-intel patching. >>> >> > >>> >> > MarvS >>> >> > >>> >> > On Thu, Aug 7, 2008 at 9:55 AM, Fabrício Ceolin >>> >> <fabceolin@xxxxxxxxx> wrote: >>> >> >> Hi Guys, >>> >> >> >>> >> >> I'm trying to get Agere (01:00.0 Communication >>> >> controller [0780]: >>> >> >> Agere Systems Unknown device [11c1:0620] ) >>> work, >>> >> with >>> >> >> agrsm-20080203.tar.gz version of the driver >>> under >>> >> 2.6.22 from ubuntu >>> >> >> gutsy. >>> >> >> This manufacturer is Advantek Techologies. The >>> >> drivers loads, but >>> >> >> there's no communication with device. >>> >> >> I tried minicom and "screen /dev/ttyAGS3 >>> 57600" >>> >> to send ATZ and >>> >> >> ATI[0-9] commands, but nothing happens. >>> >> >> I changed some defines under serial26.c to >>> show >>> >> debugs and the only >>> >> >> messagens on dmesg (attached) was: >>> >> >> status = 60...THRE...status = >>> 60...THRE...status >>> >> = 60...THRE...status >>> >> >> = 60...THRE...status = 60...THRE...status = >>> >> 60...THRE...status = >>> >> >> 60...THRE...status = 60...THRE...status = >>> >> 60...THRE...status = >>> >> >> 60...THRE...status = 60...THRE...status = >>> >> 60...THRE...status = >>> >> >> 60...THRE...status = 60...THRE...status = >>> >> 60...THRE...status = >>> >> >> 60...THRE...status = 60...THRE...status = >>> >> 60...THRE...status = >>> >> >> 60...THRE...status = 60...THRE...status = >>> >> 60...THRE...status = >>> >> >> 60...THRE...status = 60...THRE... >>> >> >> >>> >> >> Can anybody help me? >>> >> >> Thanks >>> >> >> -- >>> >> >> Fabrício Ceolin >>> >> >> ulevel.com >>> >> >> >>> >> > >>> >> >>> >> >>> >> >>> >> -- >>> >> Fabrício Ceolin >>> >> ulevel.com >>> >> >>> > >>> > >>> > >>> > >>> >> __________________________________________________________________ >>> > Yahoo! Canada Toolbar: Search from anywhere on the >>> web, and bookmark your favourite sites. Download it >>> now at >>> > http://ca.toolbar.yahoo.com. >>> > >>> >>> >>> >>> -- >>> Fabrício Ceolin >>> ulevel.com >>> >> >> >> >> __________________________________________________________________ >> Ask a question on any topic and get answers from real people. Go to Yahoo! Answers and share what you know at http://ca.answers.yahoo.com >> > > > > -- > Fabrício Ceolin > ulevel.com > -- Fabrício Ceolin ulevel.com
