Hi Bjorn, Thanks! On Wed, Aug 13, 2008 at 12:10 PM, Bjorn Wielens <uniacke1@xxxxxxxx> wrote: > Hi, > I've had the lockup myself a few times, but I can't > figure out what the problem was.. and since then it's > gone away, so I can't re-create it. > If you want, I can give you a ssh login! (But we must chat with instant messager, because PC freeze when drivers up) > Which driver tarball did you use? > You were right that you need to patch the > snd-hda-intel module, though I don't know if it will > be used in your case. > My kernel is 2.6.22, with alsa 1.0.17 instaled after (on /lib/modules/2.6.22-14-generic/updates), so I used http://linmodems.technion.ac.il/packages/ltmodem/11c11040/agrsm-HDA-20080721.tar.bz2 Remember that my modem is a 11c1:0620! > Is this a PCI card or a modem that is attached to your > sound card? > This is a PCI Card. > Finally, did you mean to say '/dev/ttyAGS3' instead of > '/etc/ttyAGS3'? > You are right. I mean to say /dev/ttyAGS3. > Bjorn. > > With freeze, I'm tring to use a old version driver http://linmodems.technion.ac.il/packages/ltmodem/sv92/agrsm-20080203.tar.gz but my two PCI slot sharing IRQ with onboard hardware (ethernet and sound). When I disable a ethernet or sound (modem on slot1 or slot2, respectively), the modem works. There are any ideas for getting my modem work together all hardware? > > --- Fabrício Ceolin <fabceolin@xxxxxxxxx> wrote: > >> Hi, >> >> Thanks! >> I tried your instructions, but patching hda_intel >> was necessary to >> compile the driver. >> >> My machine freeze when I tried do use /etc/ttyAGR3 >> >> :( >> >> >> On Thu, Aug 7, 2008 at 7:37 PM, Marvin Stodolsky >> <marvin.stodolsky@xxxxxxxxx> wrote: >> > Fabrico >> > >> > Try the newer code package >> > At >> > http://linmodems.technion.ac.il/packages/ltmodem/11c11040/ >> > Compiling resources for a driver module pair: >> agrmodem.ko + agrserial.ko >> > Use the agrsm-HDA-20080721-ALSA15.tar.bz2 or >> agrsm-HDA-20080721.tar.bz2 >> > Read the agrsm_howto.txt. for the 11c1:0620 >> modem, you don't need >> > to bother with the snd-hda-intel patching. >> > >> > MarvS >> > >> > On Thu, Aug 7, 2008 at 9:55 AM, Fabrício Ceolin >> <fabceolin@xxxxxxxxx> wrote: >> >> Hi Guys, >> >> >> >> I'm trying to get Agere (01:00.0 Communication >> controller [0780]: >> >> Agere Systems Unknown device [11c1:0620] ) work, >> with >> >> agrsm-20080203.tar.gz version of the driver under >> 2.6.22 from ubuntu >> >> gutsy. >> >> This manufacturer is Advantek Techologies. The >> drivers loads, but >> >> there's no communication with device. >> >> I tried minicom and "screen /dev/ttyAGS3 57600" >> to send ATZ and >> >> ATI[0-9] commands, but nothing happens. >> >> I changed some defines under serial26.c to show >> debugs and the only >> >> messagens on dmesg (attached) was: >> >> status = 60...THRE...status = 60...THRE...status >> = 60...THRE...status >> >> = 60...THRE...status = 60...THRE...status = >> 60...THRE...status = >> >> 60...THRE...status = 60...THRE...status = >> 60...THRE...status = >> >> 60...THRE...status = 60...THRE...status = >> 60...THRE...status = >> >> 60...THRE...status = 60...THRE...status = >> 60...THRE...status = >> >> 60...THRE...status = 60...THRE...status = >> 60...THRE...status = >> >> 60...THRE...status = 60...THRE...status = >> 60...THRE...status = >> >> 60...THRE...status = 60...THRE... >> >> >> >> Can anybody help me? >> >> Thanks >> >> -- >> >> Fabrício Ceolin >> >> ulevel.com >> >> >> > >> >> >> >> -- >> Fabrício Ceolin >> ulevel.com >> > > > > __________________________________________________________________ > Yahoo! Canada Toolbar: Search from anywhere on the web, and bookmark your favourite sites. Download it now at > http://ca.toolbar.yahoo.com. > -- Fabrício Ceolin ulevel.com
