Send the List your wvdial.conf, with XXXX for password. Marv On Fri, Aug 8, 2008 at 7:17 PM, mal_conductor <ie_ie@xxxxxxxxxxx> wrote:>> Marvin,>> would you have some ideas on why it is still not connecting?>> Looks like the ppp prompt is causing problems.>> --> Hmm... a prompt. Sending "ppp".> ppp> 'ppp' is not a valid command.> Valid commands are:> quit Hang up and disconnect> help List valid commands>>> Cheers,>>>> Marvin Stodolsky wrote:>>>> Leave whatever has been written to (both pap and chap-secrets).>> THis was done by the server.>>>> Note that when you travel and use a different @worldnet\.att\.net>> , this problem may/may_not recur at a different server site dial-in>> number.>>>> MarvS>>>> On Fri, Aug 8, 2008 at 6:46 PM, mal_conductor <ie_ie@xxxxxxxxxxx> wrote:>>>>>> Marvin,>>>>>> Thank you for the reply.>>>>>> The "Warning: Could not modify /etc/ppp/pap-secrets: Permission denied">>> has>>> gone away.>>>>>> (I notice that the line added to the pap-secrets files is different from>>> yours>>> my line only reads (both pap and chap-secrets)>>> "login01" * "password">>> login 01 * password>>>>>> as opposed to: MyLoginName\@worldnet\.att\.net * MyPassword>>> (do I need the extra stuff)>>>>>> However, same results. Modem dials, hangs up and dials again.>>>>>> See new message from terminal:>>> ubuntu@DELL1150:~$ wvdial>>> --> WvDial: Internet dialer version 1.60>>> --> Initializing modem.>>> --> Sending: ATZ>>> ATZ>>> OK>>> --> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0>>> ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0>>> OK>>> --> Modem initialized.>>> --> Sending: ATDT5144489294>>> --> Waiting for carrier.>>> ATDT5144489294>>> CONNECT 460800>>> --> Carrier detected. Waiting for prompt.>>> CVX Access Switch.>>> Access is restricted to authorized users only.>>> login:>>> --> Looks like a login prompt.>>> --> Sending: login01>>> login01>>> password:>>> --> Looks like a password prompt.>>> --> Sending: (password)>>> Valid commands are:>>> quit Hang up and disconnect>>> help List valid commands>>>>>>> --> Hmm... a prompt. Sending "ppp".>>> ppp>>> 'ppp' is not a valid command.>>> Valid commands are:>>> quit Hang up and disconnect>>> help List valid commands>>>>>>> --> Hmm... a prompt. Sending "ppp".>>> ppp>>> 'ppp' is not a valid command.>>> Valid commands are:>>> quit Hang up and disconnect>>> help List valid commands>>>>>>> --> Hmm... a prompt. Sending "ppp".>>> --> Don't know what to do! Starting pppd and hoping for the best.>>> --> Starting pppd at Fri Aug 8 18:14:55 2008>>> --> Pid of pppd: 17379>>> --> Using interface ppp0>>> --> Disconnecting at Fri Aug 8 18:15:28 2008>>> --> The PPP daemon has died: A modem hung up the phone (exit code = 16)>>> --> man pppd explains pppd error codes in more detail.>>> --> Try again and look into /var/log/messages and the wvdial and pppd man>>> pages for more information.>>> --> Auto Reconnect will be attempted in 5 seconds>>> --> Initializing modem.>>>>>>>>>>>>>>> Marvin Stodolsky wrote:>>>>>>>> RE: --> Warning: Could not modify /etc/ppp/chap-secrets: Permission>>>> denied>>>> In case of a message like:>>>> Warning: Could not modify /etc/ppp/pap-secrets: Permission denied>>>> see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html>>>>>>>> On Fri, Aug 8, 2008 at 4:25 PM, mal_conductor <ie_ie@xxxxxxxxxxx> wrote:>>>>>>>>>> I am using wvdial to dial out. The modem dials but does not connect.>>>>> Can someone help.>>>>>>>>>> Here are the messages from the terminal:>>>>> ">>>>> ubuntu@DELL1150:~$ wvdial>>>>> --> WvDial: Internet dialer version 1.60>>>>> --> Initializing modem.>>>>> --> Sending: ATZ>>>>> ATZ>>>>> OK>>>>> --> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0>>>>> ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0>>>>> OK>>>>> --> Modem initialized.>>>>> --> Sending: ATDT5144489294>>>>> --> Waiting for carrier.>>>>> ATDT5144489294>>>>> CONNECT 19200>>>>> --> Carrier detected. Waiting for prompt.>>>>> CVX Access Switch.>>>>> Access is restricted to authorized users only.>>>>> login:>>>>> --> Looks like a login prompt.>>>>> --> Sending: login01>>>>> login01>>>>> password:>>>>> --> Looks like a password prompt.>>>>> --> Sending: (password)>>>>> Valid commands are:>>>>> quit Hang up and disconnect>>>>> help List valid commands>>>>>>>>>>> --> Hmm... a prompt. Sending "ppp".>>>>> ppp>>>>> 'ppp' is not a valid command.>>>>> Valid commands are:>>>>> quit Hang up and disconnect>>>>> help List valid commands>>>>>>>>>>> --> Hmm... a prompt. Sending "ppp".>>>>> ppp>>>>> 'ppp' is not a valid command.>>>>> Valid commands are:>>>>> quit Hang up and disconnect>>>>> help List valid commands>>>>>>>>>>> --> Hmm... a prompt. Sending "ppp".>>>>> --> Don't know what to do! Starting pppd and hoping for the best.>>>>> --> Starting pppd at Fri Aug 8 15:44:13 2008>>>>> --> Warning: Could not modify /etc/ppp/pap-secrets: Permission denied>>>>> --> --> PAP (Password Authentication Protocol) may be flaky.>>>>> --> Warning: Could not modify /etc/ppp/chap-secrets: Permission denied>>>>> --> --> CHAP (Challenge Handshake) may be flaky.>>>>> --> Pid of pppd: 12385>>>>> --> Using interface ppp0>>>>> --> pppd: ��[06][08]��[06][08]��[06][08]>>>>> --> pppd: ��[06][08]��[06][08]��[06][08]>>>>> --> pppd: ��[06][08]��[06][08]��[06][08]>>>>> --> pppd: ��[06][08]��[06][08]��[06][08]>>>>> --> pppd: ��[06][08]��[06][08]��[06][08]>>>>> --> Disconnecting at Fri Aug 8 15:44:45 2008>>>>> --> The PPP daemon has died: A modem hung up the phone (exit code = 16)>>>>> --> man pppd explains pppd error codes in more detail.>>>>> --> Try again and look into /var/log/messages and the wvdial and pppd>>>>> man>>>>> pages for more information.>>>>> --> Auto Reconnect will be attempted in 5 seconds>>>>> --> Initializing modem.>>>>> --> Sending: ATZ>>>>> ATZ>>>>> OK>>>>> --> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0>>>>> ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0>>>>> OK>>>>> --> Modem initialized.>>>>> --> Initializing modem.>>>>> --> Sending: ATZ>>>>> ATZ>>>>> OK>>>>> --> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0>>>>> ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0>>>>> OK>>>>> --> Modem initialized.>>>>> --> Sending: ATDT5144489294>>>>> --> Waiting for carrier.>>>>> ATDT5144489294>>>>> CONNECT 19200>>>>> --> Carrier detected. Waiting for prompt.>>>>> CVX Access Switch.>>>>> Access is restricted to authorized users only.>>>>> login:>>>>> --> Looks like a login prompt.>>>>> --> Sending: iflores01>>>>> iflores01>>>>> password:>>>>> --> Looks like a password prompt.>>>>> --> Sending: (password)>>>>> Valid commands are:>>>>> quit Hang up and disconnect>>>>> help List valid commands>>>>>>>>>>> --> Hmm... a prompt. Sending "ppp".>>>>> ppp>>>>> 'ppp' is not a valid command.>>>>> Valid commands are:>>>>> quit Hang up and disconnect>>>>> help List valid commands>>>>>>>>>>> --> Hmm... a prompt. Sending "ppp".>>>>> ppp>>>>> 'ppp' is not a valid command.>>>>> Valid commands are:>>>>> quit Hang up and disconnect>>>>> help List valid commands>>>>>>>>>>> --> Hmm... a prompt. Sending "ppp".>>>>> --> Don't know what to do! Starting pppd and hoping for the best.>>>>> --> Starting pppd at Fri Aug 8 15:45:16 2008>>>>> --> Warning: Could not modify /etc/ppp/pap-secrets: Permission denied>>>>> --> --> PAP (Password Authentication Protocol) may be flaky.>>>>> --> Warning: Could not modify /etc/ppp/chap-secrets: Permission denied>>>>> --> --> CHAP (Challenge Handshake) may be flaky.>>>>> --> Pid of pppd: 12424>>>>> --> Using interface ppp0>>>>> --> pppd: ��[06][08]��[06][08]��[06][08]>>>>> --> pppd: ��[06][08]��[06][08]��[06][08]>>>>> Caught signal 2: Attempting to exit gracefully...>>>>> --> Terminating on signal 15>>>>> --> pppd: ��[06][08]��[06][08]��[06][08]>>>>> --> Disconnecting at Fri Aug 8 15:45:32 2008>>>>> ubuntu@DELL1150:~$>>>>>>>>>> -->>>>> View this message in context:>>>>> http://www.nabble.com/Modem-dials%2C-but-cannot-connect-tp18898502p18898502.html>>>>> Sent from the Linux Winmodem Support - Discussion mailing list archive>>>>> at>>>>> Nabble.com.>>>>>>>>>>>>>>>>>>>>>>>> -->>> View this message in context:>>> http://www.nabble.com/Modem-dials%2C-but-cannot-connect-tp18898502p18900155.html>>> Sent from the Linux Winmodem Support - Discussion mailing list archive at>>> Nabble.com.>>>>>>>>>>>> --> View this message in context: http://www.nabble.com/Modem-dials%2C-but-cannot-connect-tp18898502p18900432.html> Sent from the Linux Winmodem Support - Discussion mailing list archive at Nabble.com.>>
