Thanks a lot for the great help. Now I have a modem driver, then, I can't intall
it (problem about $ make). I've just start using linux. Please guide me about
the installation.
And I send you the KJ.txt file.
Thank you
------------
Thaimail.com
Module Size Used by
ipv6 267780 8
rfcomm 41744 2
l2cap 25728 13 rfcomm
bluetooth 61156 4 rfcomm,l2cap
ppdev 10372 0
speedstep_lib 6532 0
cpufreq_userspace 5284 0
cpufreq_ondemand 9740 0
cpufreq_stats 7104 0
freq_table 5536 2 cpufreq_ondemand,cpufreq_stats
cpufreq_conservative 8712 0
cpufreq_powersave 2688 0
video 19856 0
output 4736 1 video
sbs 15112 0
sbshc 7680 1 sbs
container 5632 0
dock 11280 0
battery 14212 0
iptable_filter 3840 0
ip_tables 14820 1 iptable_filter
x_tables 16132 1 ip_tables
ac 6916 0
lp 12324 0
snd_intel8x0 35356 3
snd_ac97_codec 101028 1 snd_intel8x0
ac97_bus 3072 1 snd_ac97_codec
snd_pcm_oss 42144 0
snd_mixer_oss 17920 1 snd_pcm_oss
snd_pcm 78596 3 snd_intel8x0,snd_ac97_codec,snd_pcm_oss
snd_seq_dummy 4868 0
snd_seq_oss 35584 0
snd_seq_midi 9376 0
snd_rawmidi 25760 1 snd_seq_midi
button 9232 0
snd_seq_midi_event 8320 2 snd_seq_oss,snd_seq_midi
snd_seq 54224 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
evdev 13056 4
parport_pc 36260 1
parport 37832 3 ppdev,lp,parport_pc
snd_timer 24836 2 snd_pcm,snd_seq
snd_seq_device 9612 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
serio_raw 7940 0
snd 56996 17 snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_dummy,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
psmouse 40336 0
i2c_sis96x 6148 0
soundcore 8800 1 snd
sis_agp 10116 1
snd_page_alloc 11400 2 snd_intel8x0,snd_pcm
agpgart 34760 1 sis_agp
i2c_core 24832 1 i2c_sis96x
shpchp 34452 0
pci_hotplug 30880 1 shpchp
pcspkr 4224 0
ext3 136712 1
jbd 48404 1 ext3
mbcache 9600 1 ext3
loop 18948 2
sg 36880 0
sr_mod 17956 0
cdrom 37408 1 sr_mod
sd_mod 30720 3
pata_acpi 8320 0
ata_generic 8324 0
floppy 59588 0
ehci_hcd 37900 0
ohci_hcd 25348 0
pata_sis 15236 2
8139too 27520 0
8139cp 24704 0
mii 6400 2 8139too,8139cp
usbcore 146028 3 ehci_hcd,ohci_hcd
libata 159344 3 pata_acpi,ata_generic,pata_sis
scsi_mod 151436 4 sg,sr_mod,sd_mod,libata
thermal 16796 0
processor 36872 1 thermal
fan 5636 0
fbcon 42912 0
tileblit 3456 1 fbcon
font 9472 1 fbcon
bitblit 6784 1 fbcon
softcursor 3072 1 bitblit
fuse 50580 7
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.24-19-generic (buildd@palmer) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Wed Jun 18 14:43:41 UTC 2008 (Ubuntu 2.6.24-19.34-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
[ 0.000000] BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 511MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000f5580
[ 0.000000] Entering add_active_range(0, 0, 131056) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 131056
[ 0.000000] HighMem 131056 -> 131056
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 131056
[ 0.000000] On node 0 totalpages: 131056
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 991 pages used for memmap
[ 0.000000] Normal zone: 125969 pages, LIFO batch:31
[ 0.000000] HighMem zone: 0 pages used for memmap
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] DMI 2.2 present.
[ 0.000000] ACPI: RSDP signature @ 0xC00F7020 checksum 0
[ 0.000000] ACPI: RSDP 000F7020, 0014 (r0 AWARD )
[ 0.000000] ACPI: RSDT 1FFF3000, 002C (r1 AWARD AWRDACPI 42302E31 AWRD 0)
[ 0.000000] ACPI: FACP 1FFF3040, 0074 (r1 AWARD AWRDACPI 42302E31 AWRD 0)
[ 0.000000] ACPI: DSDT 1FFF30C0, 3943 (r1 AWARD AWRDACPI 1000 MSFT 100000D)
[ 0.000000] ACPI: FACS 1FFF0000, 0040
[ 0.000000] ACPI: APIC 1FFF6A40, 0068 (r1 AWARD AWRDACPI 42302E31 AWRD 0)
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 15:2 APIC version 20
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 dfl dfl)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 30000000 (gap: 20000000:dec00000)
[ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130033
[ 0.000000] Kernel command line: root=UUID=C8440DBD440DAF6E loop=/ubuntu/disks/root.disk ro quiet splash
[ 0.000000] mapped APIC to ffffb000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes)
[ 0.000000] Detected 2390.293 MHz processor.
[ 18.851378] Console: colour VGA+ 80x25
[ 18.851383] console [tty0] enabled
[ 18.851832] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 18.852221] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 18.865606] Memory: 507012k/524224k available (2177k kernel code, 16584k reserved, 1006k data, 368k init, 0k highmem)
[ 18.865617] virtual kernel memory layout:
[ 18.865619] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB)
[ 18.865620] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 18.865621] vmalloc : 0xe0800000 - 0xff7fe000 ( 495 MB)
[ 18.865622] lowmem : 0xc0000000 - 0xdfff0000 ( 511 MB)
[ 18.865623] .init : 0xc0421000 - 0xc047d000 ( 368 kB)
[ 18.865625] .data : 0xc0320434 - 0xc041bdc4 (1006 kB)
[ 18.865626] .text : 0xc0100000 - 0xc0320434 (2177 kB)
[ 18.865629] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 18.865675] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
[ 18.945630] Calibrating delay using timer specific routine.. 4785.37 BogoMIPS (lpj=9570751)
[ 18.945661] Security Framework initialized
[ 18.945669] SELinux: Disabled at boot.
[ 18.945686] AppArmor: AppArmor initialized
[ 18.945692] Failure registering capabilities with primary security module.
[ 18.945702] Mount-cache hash table entries: 512
[ 18.945860] Initializing cgroup subsys ns
[ 18.945865] Initializing cgroup subsys cpuacct
[ 18.945878] CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000 00000000
[ 18.945894] CPU: Trace cache: 12K uops, L1 D cache: 8K
[ 18.945897] CPU: L2 cache: 512K
[ 18.945900] CPU: Hyper-Threading is disabled
[ 18.945903] CPU: After all inits, caps: bfebfbff 00000000 00000000 0000b080 00004400 00000000 00000000 00000000
[ 18.945918] Compat vDSO mapped to ffffe000.
[ 18.945934] Checking 'hlt' instruction... OK.
[ 18.962064] SMP alternatives: switching to UP code
[ 18.963879] Freeing SMP alternatives: 11k freed
[ 18.964047] Early unpacking initramfs... done
[ 19.353392] ACPI: Core revision 20070126
[ 19.353461] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[ 19.376210] CPU0: Intel(R) Pentium(R) 4 CPU 2.40GHz stepping 09
[ 19.376260] Total of 1 processors activated (4785.37 BogoMIPS).
[ 19.376373] ENABLING IO-APIC IRQs
[ 19.376559] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 19.521198] Brought up 1 CPUs
[ 19.521227] CPU0 attaching sched-domain:
[ 19.521231] domain 0: span 01
[ 19.521234] groups: 01
[ 19.521479] net_namespace: 64 bytes
[ 19.521488] Booting paravirtualized kernel on bare hardware
[ 19.522122] Time: 12:21:32 Date: 08/03/08
[ 19.522161] NET: Registered protocol family 16
[ 19.522435] EISA bus registered
[ 19.522463] ACPI: bus type pci registered
[ 19.534620] PCI: PCI BIOS revision 2.10 entry at 0xfbbd0, last bus=1
[ 19.534623] PCI: Using configuration type 1
[ 19.534628] Setting up standard PCI resources
[ 19.537506] ACPI: EC: Look up EC in DSDT
[ 19.541089] ACPI: Interpreter enabled
[ 19.541093] ACPI: (supports S0 S1 S4 S5)
[ 19.541111] ACPI: Using IOAPIC for interrupt routing
[ 19.546099] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 19.546343] Enabling SiS 96x SMBus.
[ 19.547134] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 19.563610] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11 14 15)
[ 19.563730] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 14 15) *0, disabled.
[ 19.563843] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 9 10 11 14 15)
[ 19.563956] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 14 15)
[ 19.564067] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11 14 15)
[ 19.564181] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 14 15)
[ 19.564293] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 14 15) *0, disabled.
[ 19.564405] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 9 10 11 14 15)
[ 19.564557] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 19.564600] pnp: PnP ACPI init
[ 19.564611] ACPI: bus type pnp registered
[ 19.567516] pnp: PnP ACPI: found 12 devices
[ 19.567520] ACPI: ACPI bus type pnp unregistered
[ 19.567525] PnPBIOS: Disabled by ACPI PNP
[ 19.567847] PCI: Using ACPI for IRQ routing
[ 19.567852] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 19.613071] NET: Registered protocol family 8
[ 19.613074] NET: Registered protocol family 20
[ 19.613172] AppArmor: AppArmor Filesystem Enabled
[ 19.617056] Time: tsc clocksource has been installed.
[ 19.625106] system 00:00: iomem range 0xcf800-0xcffff has been reserved
[ 19.625110] system 00:00: iomem range 0xf0000-0xf7fff could not be reserved
[ 19.625113] system 00:00: iomem range 0xf8000-0xfbfff could not be reserved
[ 19.625116] system 00:00: iomem range 0xfc000-0xfffff could not be reserved
[ 19.625119] system 00:00: iomem range 0x1fff0000-0x1fffffff could not be reserved
[ 19.625123] system 00:00: iomem range 0xffff0000-0xffffffff could not be reserved
[ 19.625126] system 00:00: iomem range 0x0-0x9ffff could not be reserved
[ 19.625129] system 00:00: iomem range 0x100000-0x1ffeffff could not be reserved
[ 19.625132] system 00:00: iomem range 0xffee0000-0xffefffff could not be reserved
[ 19.625136] system 00:00: iomem range 0xfffe0000-0xfffeffff could not be reserved
[ 19.625139] system 00:00: iomem range 0xfec00000-0xfecfffff could not be reserved
[ 19.625142] system 00:00: iomem range 0xfee00000-0xfeefffff could not be reserved
[ 19.625151] system 00:02: ioport range 0x4d0-0x4d1 has been reserved
[ 19.625154] system 00:02: ioport range 0x800-0x805 has been reserved
[ 19.625157] system 00:02: ioport range 0x290-0x297 has been reserved
[ 19.655702] PCI: Bridge: 0000:00:01.0
[ 19.655705] IO window: disabled.
[ 19.655712] MEM window: dc000000-ddffffff
[ 19.655717] PREFETCH window: d8000000-dbffffff
[ 19.655746] NET: Registered protocol family 2
[ 19.693094] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 19.693395] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 19.693510] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[ 19.693628] TCP: Hash tables configured (established 16384 bind 16384)
[ 19.693631] TCP reno registered
[ 19.705149] checking if image is initramfs... it is
[ 20.156595] Switched to high resolution mode on CPU 0
[ 20.479726] Freeing initrd memory: 7945k freed
[ 20.480577] audit: initializing netlink socket (disabled)
[ 20.480601] audit(1217766092.496:1): initialized
[ 20.483234] VFS: Disk quotas dquot_6.5.1
[ 20.483336] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 20.483535] io scheduler noop registered
[ 20.483538] io scheduler anticipatory registered
[ 20.483540] io scheduler deadline registered
[ 20.483554] io scheduler cfq registered (default)
[ 20.483623] Boot video device is 0000:01:00.0
[ 20.483966] isapnp: Scanning for PnP cards...
[ 20.837650] isapnp: No Plug & Play device found
[ 20.875567] Real Time Clock Driver v1.12ac
[ 20.875701] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 20.875870] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 20.876866] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 20.877144] ACPI: PCI Interrupt 0000:00:02.6[C] -> GSI 18 (level, low) -> IRQ 16
[ 20.877156] ACPI: PCI interrupt for device 0000:00:02.6 disabled
[ 20.877990] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 20.878085] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 20.878229] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 20.878541] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 20.878547] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 20.880164] mice: PS/2 mouse device common for all mice
[ 20.880326] EISA: Probing bus 0 at eisa.0
[ 20.880335] Cannot allocate resource for EISA slot 1
[ 20.880345] Cannot allocate resource for EISA slot 4
[ 20.880362] EISA: Detected 0 cards.
[ 20.880366] cpuidle: using governor ladder
[ 20.880369] cpuidle: using governor menu
[ 20.880497] NET: Registered protocol family 1
[ 20.880540] Using IPI No-Shortcut mode
[ 20.880583] registered taskstats version 1
[ 20.880687] Magic number: 4:331:379
[ 20.880848] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 20.880850] EDD information not available.
[ 20.881403] Freeing unused kernel memory: 368k freed
[ 20.911823] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 22.157720] fuse init (API version 7.9)
[ 22.178420] ACPI: Fan [FAN] (on)
[ 22.186370] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126]
[ 22.188296] ACPI: Thermal Zone [THRM] (40 C)
[ 22.874166] SCSI subsystem initialized
[ 22.949301] libata version 3.00 loaded.
[ 22.965359] usbcore: registered new interface driver usbfs
[ 22.965394] usbcore: registered new interface driver hub
[ 22.986651] usbcore: registered new device driver usb
[ 23.003019] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 23.003081] 8139cp 0000:00:0d.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip
[ 23.003086] 8139cp 0000:00:0d.0: Try the "8139too" driver instead.
[ 23.014294] 8139too Fast Ethernet driver 0.9.28
[ 23.014386] ACPI: PCI Interrupt 0000:00:0d.0[A] -> GSI 19 (level, low) -> IRQ 17
[ 23.015088] eth0: RealTek RTL8139 at 0xe000, 00:0d:87:c0:3f:d0, IRQ 17
[ 23.015092] eth0: Identified 8139 chip type 'RTL-8100B/8139D'
[ 23.025772] pata_sis 0000:00:02.5: version 0.5.2
[ 23.025840] ACPI: PCI Interrupt 0000:00:02.5[A] -> GSI 16 (level, low) -> IRQ 18
[ 23.031362] scsi0 : pata_sis
[ 23.032956] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[ 23.035688] scsi1 : pata_sis
[ 23.036408] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x4000 irq 14
[ 23.036412] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x4008 irq 15
[ 23.102905] Floppy drive(s): fd0 is 1.44M
[ 23.123731] FDC 0 is a post-1991 82077
[ 23.197932] ata1.00: ATA-7: SAMSUNG SP0411N, TW100-09, max UDMA/100
[ 23.197939] ata1.00: 78242976 sectors, multi 16: LBA48
[ 23.205969] ata1.00: configured for UDMA/100
[ 23.889095] ata2.00: ATAPI: LITE-ON DVD SHD-16P1S, GS05, max UDMA/33
[ 23.889126] ata2.01: ATAPI: BENQ DVD DC DW2000, 6B33, max UDMA/66
[ 23.889144] ata2.01: limited to UDMA/33 due to 40-wire cable
[ 24.076899] ata2.00: configured for UDMA/33
[ 24.264712] ata2.01: configured for UDMA/33
[ 24.264887] scsi 0:0:0:0: Direct-Access ATA SAMSUNG SP0411N TW10 PQ: 0 ANSI: 5
[ 24.265906] scsi 1:0:0:0: CD-ROM LITE-ON DVD SHD-16P1S GS05 PQ: 0 ANSI: 5
[ 24.266989] scsi 1:0:1:0: CD-ROM BENQ DVD DC DW2000 6B33 PQ: 0 ANSI: 5
[ 24.270320] ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 20 (level, low) -> IRQ 19
[ 24.270338] ohci_hcd 0000:00:03.0: OHCI Host Controller
[ 24.270757] ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 1
[ 24.270782] ohci_hcd 0000:00:03.0: irq 19, io mem 0xde000000
[ 24.326585] usb usb1: configuration #1 chosen from 1 choice
[ 24.326621] hub 1-0:1.0: USB hub found
[ 24.326632] hub 1-0:1.0: 3 ports detected
[ 24.428440] ACPI: PCI Interrupt 0000:00:03.1[B] -> GSI 21 (level, low) -> IRQ 20
[ 24.428462] ohci_hcd 0000:00:03.1: OHCI Host Controller
[ 24.428507] ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 2
[ 24.428527] ohci_hcd 0000:00:03.1: irq 20, io mem 0xde001000
[ 24.486385] usb usb2: configuration #1 chosen from 1 choice
[ 24.486418] hub 2-0:1.0: USB hub found
[ 24.486428] hub 2-0:1.0: 3 ports detected
[ 24.588757] ACPI: PCI Interrupt 0000:00:03.3[D] -> GSI 23 (level, low) -> IRQ 21
[ 24.588779] ehci_hcd 0000:00:03.3: EHCI Host Controller
[ 24.588825] ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 3
[ 24.588871] PCI: cache line size of 128 is not supported by device 0000:00:03.3
[ 24.588885] ehci_hcd 0000:00:03.3: irq 21, io mem 0xde002000
[ 24.600177] ehci_hcd 0000:00:03.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 24.600341] usb usb3: configuration #1 chosen from 1 choice
[ 24.600374] hub 3-0:1.0: USB hub found
[ 24.600383] hub 3-0:1.0: 6 ports detected
[ 24.722033] Driver 'sd' needs updating - please use bus_type methods
[ 24.722167] sd 0:0:0:0: [sda] 78242976 512-byte hardware sectors (40060 MB)
[ 24.722185] sd 0:0:0:0: [sda] Write Protect is off
[ 24.722189] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 24.722214] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 24.722279] sd 0:0:0:0: [sda] 78242976 512-byte hardware sectors (40060 MB)
[ 24.722294] sd 0:0:0:0: [sda] Write Protect is off
[ 24.722297] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 24.722320] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 24.722325] sda: sda1 sda2 <<4>Driver 'sr' needs updating - please use bus_type methods
[ 24.744085] sda5 >
[ 24.744226] sd 0:0:0:0: [sda] Attached SCSI disk
[ 24.751746] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 24.751773] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 24.751879] scsi 1:0:1:0: Attached scsi generic sg2 type 5
[ 24.752436] sr0: scsi3-mmc drive: 4x/48x cd/rw xa/form2 cdda tray
[ 24.752442] Uniform CD-ROM driver Revision: 3.20
[ 24.752499] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 24.759791] sr1: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 24.759871] sr 1:0:1:0: Attached scsi CD-ROM sr1
[ 25.415068] loop: module loaded
[ 25.460237] kjournald starting. Commit interval 5 seconds
[ 25.460261] EXT3-fs: mounted filesystem with ordered data mode.
[ 34.202892] input: PC Speaker as /devices/platform/pcspkr/input/input2
[ 34.462460] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 34.521499] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 34.602265] Linux agpgart interface v0.102
[ 34.699236] agpgart: Detected SiS chipset - id:1617
[ 34.707906] agpgart: AGP aperture is 128M @ 0xd0000000
[ 34.794143] sis96x_smbus 0000:00:02.1: SiS96x SMBus base address: 0x10c0
[ 35.479342] input: Power Button (FF) as /devices/virtual/input/input3
[ 35.509450] ACPI: Power Button (FF) [PWRF]
[ 35.509557] input: Power Button (CM) as /devices/virtual/input/input4
[ 35.541378] ACPI: Power Button (CM) [PWRB]
[ 35.541458] input: Sleep Button (CM) as /devices/virtual/input/input5
[ 35.558638] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input6
[ 35.573366] ACPI: Sleep Button (CM) [FUTS]
[ 35.604350] parport_pc 00:09: reported by Plug and Play ACPI
[ 35.604433] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[ 37.420057] ACPI: PCI Interrupt 0000:00:02.7[C] -> GSI 18 (level, low) -> IRQ 16
[ 38.246636] intel8x0_measure_ac97_clock: measured 55345 usecs
[ 38.246641] intel8x0: clocking to 48000
[ 40.054199] lp0: using parport0 (interrupt-driven).
[ 40.714967] EXT3 FS on loop0, internal journal
[ 48.726305] Adding 488272k swap on /host/ubuntu/disks/swap.disk. Priority:-1 extents:1 across:488272k
[ 49.195038] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 49.643742] No dock devices found.
[ 50.993271] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[ 50.993279] apm: overridden by ACPI.
[ 51.137667] ppdev: user-space parallel port driver
[ 51.379830] audit(1217740924.458:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=4777 profile="/usr/sbin/cupsd" namespace="default"
[ 52.420310] eth0: link down
[ 52.584849] Bluetooth: Core ver 2.11
[ 52.585954] NET: Registered protocol family 31
[ 52.585961] Bluetooth: HCI device and connection manager initialized
[ 52.585966] Bluetooth: HCI socket layer initialized
[ 52.618135] Bluetooth: L2CAP ver 2.9
[ 52.618142] Bluetooth: L2CAP socket layer initialized
[ 52.708256] Bluetooth: RFCOMM socket layer initialized
[ 52.708625] Bluetooth: RFCOMM TTY layer initialized
[ 52.708630] Bluetooth: RFCOMM ver 1.8
[ 76.046857] NET: Registered protocol family 10
[ 76.047533] lo: Disabled Privacy Extensions
[ 76.048322] ADDRCONF(NETDEV_UP): eth0: link is not ready
