Marvin Stodolsky a écrit :
RE: SmartLink Soft Modem: version 2.9.9e-pre1
This old version is likely your only problem.
Download from
http://linmodems.technion.ac.il/packages/smartlink/
the package SLMODEMD.gcc4.3.tar.gz having a compiled
slmodemd. Unpack under Linux with:
$ tar zxf SLMODEMD.gcc4.3.tar.gz
Ok! It works out of the box with this version! I will do a bug report
for the debian package.
Thx again,
Best regards
Guillaume
cd SLMODEMD.gcc4.3
$ sudo mv /usr/sbin/slmodemd /usr/sbin/slmodemd.old
$ sudo cp slmodemd /usr/sbin/slmodemd
$ sudo chmod + x /usr/sbin/slmodemd
$ slmodemd --version
should report 2.9.11
Then setup the modem and try to dialout again.
MarvS
On Fri, Aug 1, 2008 at 11:48 AM, giggzounet <giggzounet@xxxxxxxxx> wrote:
Jacques Goldberg a écrit :
Have you got a line
Carrier Check = no
in your wvdial.conf?
Jacques
Yes. you can see my wvdial.conf at the end of the first mail.
Thx
[snip]
I copy my wvdial config :
[Dialer Defaults]
Modem = /dev/ttySL0
Modem Type = Analog Modem
Baud = 460800
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
Carrier Check = no
Stupid Mode = yes
ISDN = 0
Phone = 0860707070
Username = mylogin
Password = mypassword
