Oh, and I forgot to say, Congrats on getting it
working! this is wonderful news for those of us on the
front :)
Happy modeming!
Bjorn.
--- roan <roan@xxxxxxxx> wrote:
> it is connected now!
> thx you a lot for helping me.
> i've attached file with agrmodem and agrserial.ko
> now i should try making modem work on fresh system.
> do i
> need to repeat all the steps or i will need only to
> modprobe those two modules?
>
> On Mon, 28 Jul 2008 18:19:09 -0300
> Bjorn Wielens <Uniacke1@xxxxxxxx> wrote:
> > Can you double-check to make sure the modules are
> loaded
> >(lsmod | grep agr should show both agrmodem and
> >agrserial) ? They need to be re-'modprobe'd on
> every
> >reboot, at least until they are automatically
> loaded by a
> >startup script.
> > Bjorn.
> >
> >
> > roan wrote:
> >> ok. i added line 'Modem = /dev/ttyAGS3' to
> wvdial.conf
> >> added phone#, login and password but there is an
> error:
> >> -----
> >> $ wvdial
> >> --> WvDial: Internet dialer version 1.60
> >> --> Cannot open /dev/ttyAGS3: No such file or
> directory
> >> --> Cannot open /dev/ttyAGS3: No such file or
> directory
> >> --> Cannot open /dev/ttyAGS3: No such file or
> directory
> >> -----
> >>
> >>
> >> On Mon, 28 Jul 2008 12:10:05 -0400 (EDT)
> >> Bjorn Wielens <uniacke1@xxxxxxxx> wrote:
> >>> Hi Roan, Great news!!!
> >>> The next step is now relatively simple.. the
> hard part
> >>> is done.
> >>>
> >>> wvdialconf won't normally detect ports that are
> not in
> >>> the ttyS* range, so the easiest thing to do is
> just
> >>> edit /etc/wvdial.conf manually and point the
> modem
> >>> device setting /dev/ttyAGS3.
> >>>
> >>> After adding your ISP phone num, username, and
> >>> password, you should be able to go by issuing
> >>> 'wvdial'.
> >>>
> >>> Bjorn
> >>>
> >>>
> >>> --- roan <roan@xxxxxxxx> wrote:
> >>>
> >>>> but! there is smth new i can say. and this
> makes me
> >>>> happy :)
> >>>> -----
> >>>> $ cat /proc/asound/pcm
> >>>> 00-06: Si3054 Modem : Si3054 Modem : playback 1
> :
> >>>> capture 1
> >>>> 00-02: ALC883 Analog : ALC883 Analog : capture
> 2
> >>>> 00-01: ALC883 Digital : ALC883 Digital :
> playback 1
> >>>> 00-00: ALC883 Analog : ALC883 Analog : playback
> 1 :
> >>>>capture 2
> >>>> -----
> >>>> what next should i do to make modem work? :)
> >>>>
> >>>>
> >>>> On Mon, 28 Jul 2008 08:52:34 -0400 (EDT)
> >>>> Bjorn Wielens <uniacke1@xxxxxxxx> wrote:
> >>>> > Hmmm... Menedas is also running in to this
> >>>> issue...
> >>>> > Please try the following and report back:
> >>>> > >> The following should work for you:
> >>>> >> Obtain the ALSA-driver 1.0.15 source
> tarball, and
> >>>> > the
> >>>> >> ALSA-driver 1.0.16 source tarball.
> >>>> >> Extract each to a separate directory.
> >>>> >> Copy the contents of folder
> >>>> >> alsa-driver-1.0.15/alsa-kernel/pci/hda/ TO
> >>>> >> alsa-driver-1.0.16/alsa-kernel/pci/hda/
> >>>> (overwrite
> >>>> >> existing files.)
> >>>> >> >> Modify the hda_codec.c file you just
> copied over
> >>>> as
> >>>> >> we've discussed earlier.
> >>>> >> >> then, in alsa-driver-1.0.16/ issue
> commands
> >>>> >> './configure --with-cards=hda-intel'
> followed by
> >>>> >> 'make'. This should generate the
> snd-hda-intel.ko
> >>>> >> module in the alsa-driver-1.0.16/modules
> >>>> directory.
> >>>> >> replace the one in /lib/modules/`uname
> >>>> >> -r`/kernel/sound/pci/hda/ with this one, and
> >>>> issue
> >>>> >> command 'sudo depmod -ae'. Reboot to load
> this
> >>>> new
> >>>> >> module.
> >>>> >> Then, you should be able to modprobe the
> modem
> >>>> > drivers
> >>>> >> successfully.
> >>>> >> >> If you have success, please send the
> agrmodem.ko,
> >>>> >> agrserial.ko and snd-hda-intel.ko files from
> your
> >>>> >> computer to me in a tarball named
> >>>> >> 11c11040-(yourDistro)-(kernel version).tar
> so we
> >>>> can
> >>>> >> use these to make life a little easier for
> others
> >>>> > with
> >>>> >> the same configuration as yourself.
> >>>> > > Almost there, > > Bjorn.
> >>>> > > > > --- roan <roan@xxxxxxxx> wrote:
> >>>> > >> i tried 'sudo modprobe agrmodem
> >>>> --force-modversion'
> >>>> >> but >> the output was the same:
> >>>> >> -----
> >>>> >> ~/Desktop/agrsm-HDA-20080721-ALSA15$ sudo
> >>>> modprobe >> agrmodem --force-modversion
> >>>> >> FATAL: Error inserting agrmodem >>
> >>>>
> (/lib/modules/2.6.24-19-generic/extra/agrmodem.ko):
> >>
> >>>>Unknown
> >>>> symbol in module, or unknown parameter
> >>>> (see
> >>>> >> dmesg)
> >>>> >> -----
> >>>> >> >> and i also attached the output of 'dmesg'
> if this
> >>>> >> will >> help.
> >>>> >> >> >> On Sun, 27 Jul 2008 18:34:33 -0300
> >>>> >> Bjorn Wielens <Uniacke1@xxxxxxxx> wrote:
> >>>> >> > Hi Roan,
> >>>> >> > Great news!
> >>>> >> > You can send the output of dmesg if you
> like,
> >>>> but
> >>>> >> I >> >should say the following first:
> >>>> >> > if the output says 'module agrmodem
> disagrees
> >>>> >> about >> >version of symbol snd_card' or
> something
> >>>>like
> >>>> that,
> >>>> >> try >> >again with 'sudo modprobe agrmodem
> >>>> >> --force-modversion'. >> >This tells the
> system to
> >>>>ignore the version
> >>>> >> complaint and >> >load anyway.
> >>>> >> > >> > However, if you get an error about
> symbols >>
> >>>> >'snd_hda_codec_read/write' then please send me
> >>>> the
> >>>> >> output >> >so I can see what's up.
> >>>> >> > >> > Also when using wvdial, if you get an
> error
> >>>> that
> >>>> >> the >> >modem is not responding, check the
> output of
> >>>> dmesg
> >>>> >> too... >> >If you see a 'No Stream' error,
> it means
> >>>>we have
> >>>> a
> >>>> >> little >> >more work ahead of us... but that
> we are
> >>>>well in
> >>>> >> the >> >right direction.
> >>>> >> > >> > Good luck!
> >>>> >> > Bjorn.
> >>>> >> > >> > roan wrote:
> >>>> >> >> ok. now i got it.
> >>>> >> >> so i copied serial26.c file
> >>>> >> >> then tried 'make module'
> >>>> >> >> ---------
> >>>> >> >> ~/Desktop/agrsm-HDA-20080721-ALSA15$ make
> >>>> module
> >>>> >> >> make -C /lib/modules/`uname -r`/build/ >>
> >>
>
=== message truncated ===
__________________________________________________________________
Yahoo! Canada Toolbar: Search from anywhere on the web, and bookmark your favourite sites. Download it now at
http://ca.toolbar.yahoo.com.
