Hi Roan, Great news!!!
The next step is now relatively simple.. the hard part
is done.
wvdialconf won't normally detect ports that are not in
the ttyS* range, so the easiest thing to do is just
edit /etc/wvdial.conf manually and point the modem
device setting /dev/ttyAGS3.
After adding your ISP phone num, username, and
password, you should be able to go by issuing
'wvdial'.
Bjorn
--- roan <roan@xxxxxxxx> wrote:
but! there is smth new i can say. and this makes me
happy :)
-----
$ cat /proc/asound/pcm
00-06: Si3054 Modem : Si3054 Modem : playback 1 :
capture 1
00-02: ALC883 Analog : ALC883 Analog : capture 2
00-01: ALC883 Digital : ALC883 Digital : playback 1
00-00: ALC883 Analog : ALC883 Analog : playback 1 : capture 2
-----
what next should i do to make modem work? :)
On Mon, 28 Jul 2008 08:52:34 -0400 (EDT)
Bjorn Wielens <uniacke1@xxxxxxxx> wrote:
> Hmmm... Menedas is also running in to this
issue...
> Please try the following and report back:
> >> The following should work for you:
>> Obtain the ALSA-driver 1.0.15 source tarball, and
> the
>> ALSA-driver 1.0.16 source tarball.
>> Extract each to a separate directory.
>> Copy the contents of folder
>> alsa-driver-1.0.15/alsa-kernel/pci/hda/ TO
>> alsa-driver-1.0.16/alsa-kernel/pci/hda/
(overwrite
>> existing files.)
>> >> Modify the hda_codec.c file you just copied over
as
>> we've discussed earlier.
>> >> then, in alsa-driver-1.0.16/ issue commands
>> './configure --with-cards=hda-intel' followed by
>> 'make'. This should generate the snd-hda-intel.ko
>> module in the alsa-driver-1.0.16/modules
directory.
>> replace the one in /lib/modules/`uname
>> -r`/kernel/sound/pci/hda/ with this one, and
issue
>> command 'sudo depmod -ae'. Reboot to load this
new
>> module.
>> Then, you should be able to modprobe the modem
> drivers
>> successfully.
>> >> If you have success, please send the agrmodem.ko,
>> agrserial.ko and snd-hda-intel.ko files from your
>> computer to me in a tarball named
>> 11c11040-(yourDistro)-(kernel version).tar so we
can
>> use these to make life a little easier for others
> with
>> the same configuration as yourself.
> > Almost there, > > Bjorn.
> > > > --- roan <roan@xxxxxxxx> wrote:
> >> i tried 'sudo modprobe agrmodem
--force-modversion'
>> but >> the output was the same:
>> -----
>> ~/Desktop/agrsm-HDA-20080721-ALSA15$ sudo
modprobe >> agrmodem --force-modversion
>> FATAL: Error inserting agrmodem >>
(/lib/modules/2.6.24-19-generic/extra/agrmodem.ko): >> Unknown
symbol in module, or unknown parameter
(see
>> dmesg)
>> -----
>> >> and i also attached the output of 'dmesg' if this
>> will >> help.
>> >> >> On Sun, 27 Jul 2008 18:34:33 -0300
>> Bjorn Wielens <Uniacke1@xxxxxxxx> wrote:
>> > Hi Roan,
>> > Great news!
>> > You can send the output of dmesg if you like,
but
>> I >> >should say the following first:
>> > if the output says 'module agrmodem disagrees
>> about >> >version of symbol snd_card' or something like
that,
>> try >> >again with 'sudo modprobe agrmodem
>> --force-modversion'. >> >This tells the system to ignore the version
>> complaint and >> >load anyway.
>> > >> > However, if you get an error about symbols >>
>'snd_hda_codec_read/write' then please send me
the
>> output >> >so I can see what's up.
>> > >> > Also when using wvdial, if you get an error
that
>> the >> >modem is not responding, check the output of
dmesg
>> too... >> >If you see a 'No Stream' error, it means we have
a
>> little >> >more work ahead of us... but that we are well in
>> the >> >right direction.
>> > >> > Good luck!
>> > Bjorn.
>> > >> > roan wrote:
>> >> ok. now i got it.
>> >> so i copied serial26.c file
>> >> then tried 'make module'
>> >> ---------
>> >> ~/Desktop/agrsm-HDA-20080721-ALSA15$ make
module
>> >> make -C /lib/modules/`uname -r`/build/ >> >>
>>
SUBDIRS=/home/roan/Desktop/agrsm-HDA-20080721-ALSA15
>> >> >>modules
>> >> make[1]: Entering directory >>
>>`/usr/src/linux-headers-2.6.24-19-generic'
>> >> CC [M] >>
/home/roan/Desktop/agrsm-HDA-20080721-ALSA15/serial26.o
>> >> LD [M] >>
/home/roan/Desktop/agrsm-HDA-20080721-ALSA15/agrmodem.o
>> >> LD [M] >>
/home/roan/Desktop/agrsm-HDA-20080721-ALSA15/agrserial.o
>> >> Building modules, stage 2.
>> >> MODPOST 2 modules
>> >> WARNING: could not find >> >>
>>
>
/home/roan/Desktop/agrsm-HDA-20080721-ALSA15/.agrmodemlib.o.cmd
>> >> >>for >> >>
>>
>
/home/roan/Desktop/agrsm-HDA-20080721-ALSA15/agrmodemlib.o
>> >> WARNING: "snd_hda_codec_write" >> >>
>>
>
[/home/roan/Desktop/agrsm-HDA-20080721-ALSA15/agrmodem.ko]
>> >> >>undefined!
>> >> WARNING: "snd_hda_codec_read" >> >>
>>
>
[/home/roan/Desktop/agrsm-HDA-20080721-ALSA15/agrmodem.ko]
>> >> >>undefined!
>> >> WARNING: "snd_cards" >> >>
>>
>
[/home/roan/Desktop/agrsm-HDA-20080721-ALSA15/agrmodem.ko]
>> >> >>undefined!
>> >> CC >> >> >>
>
/home/roan/Desktop/agrsm-HDA-20080721-ALSA15/agrmodem.mod.o
>> >> LD [M] >>
/home/roan/Desktop/agrsm-HDA-20080721-ALSA15/agrmodem.ko
>> >> CC >> >> >>
>
/home/roan/Desktop/agrsm-HDA-20080721-ALSA15/agrserial.mod.o
=== message truncated ===
__________________________________________________________________
Get a sneak peak at messages with a handy reading pane with All new
Yahoo! Mail: http://ca.promos.yahoo.com/newmail/overview2/
