Only plain text email is forwarded by the Discuss@xxxxxxxxxxxxx List Server,
as HTML can contain viruses. Use as the email Subject Line:
YourName, YourCountry
Welcome to openSUSE 10.3 (i586) - Kernel kernel 2.6.22.17-0.1-default
With this Subject Line cogent experts will be alerted, and useful case names
left in the Archive.
YourCountry will enable Country specific guidance. Linux experts in
YourCountry
can be found through: http://www.linux.org/groups/index.html.
They will know your Country's modem code, which may be essential for dialup
service.
Responses from Discuss@xxxxxxxxxxxxx are sometimes blocked by an Internet
Provider mail filters.
So in a day, also check the Archived responses at http://www.linmodems.org
-------------------------- System information ----------------------------
CPU=i686,
Welcome to openSUSE 10.3 (i586) - Kernel
Linux version 2.6.22.17-0.1-default (geeko@buildhost) (gcc version 4.2.1 (SUSE
Linux)) #1 SMP 2008/02/10 20:01:04 UTC
scanModem update of: 2008_07_12
There are no blacklisted modem drivers in /etc/modprobe* files
Attached USB devices are:
ID 04f2:b033 Chicony Electronics Co., Ltd
ID 046d:c510 Logitech, Inc.
ID 0b05:1712 ASUSTek Computer, Inc.
ID 08ff:1600 AuthenTec, Inc.
USB modems not recognized
For candidate card in slot 00:1b.0, firmware information and bootup
diagnostics are:
PCI slot PCI ID SubsystemID Name
---------- --------- --------- --------------
00:1b.0 8086:284b 1043:1339 Audio device: Intel Corporation 82801H
Modem interrupt assignment and sharing:
23: 178788 355 IO-APIC-fasteoi HDA Intel
--- Bootup diagnostics for card in PCI slot 00:1b.0 ----
ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 23
PCI: Setting latency timer of device 0000:00:1b.0 to 64
ACPI: PCI interrupt for device 0000:00:1b.0 disabled
PM: Writing back config space on device 0000:00:1b.0 at offset 3 (was 0,
writing 8)
PM: Writing back config space on device 0000:00:1b.0 at offset 1 (was 100106,
writing 100102)
ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 23
PCI: Setting latency timer of device 0000:00:1b.0 to 64
ACPI: PCI interrupt for device 0000:00:1b.0 disabled
PM: Writing back config space on device 0000:00:1b.0 at offset 3 (was 0,
writing 8)
PM: Writing back config space on device 0000:00:1b.0 at offset 1 (was 100106,
writing 100102)
ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 23
PCI: Setting latency timer of device 0000:00:1b.0 to 64
ACPI: PCI interrupt for device 0000:00:1b.0 disabled
PM: Writing back config space on device 0000:00:1b.0 at offset 3 (was 0,
writing 8)
PM: Writing back config space on device 0000:00:1b.0 at offset 1 (was 100106,
writing 100102)
ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 23
PCI: Setting latency timer of device 0000:00:1b.0 to 64
The PCI slot 00:1b.0 of the modem card may be disabled early in
a bootup process, but then enabled later. If modem drivers load
but the modem is not responsive, read DOCs/Bootup.txt about possible fixes.
Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx
if help is needed.
===== Advanced Linux Sound Architecture (ALSA) diagnostics =====
The ALSA packages provide audio support and also drivers for some modems.
ALSA diagnostics are written during bootup to /proc/asound/ folders.
PCI slot 00:1b.0 has a High Definition Audio Card
The drivers are in the kernel modules tree at:
/lib/modules/2.6.22.17-0.1-default/kernel/sound/pci/hda/snd-hda-intel.ko
/lib/modules/2.6.22.17-0.1-default/updates/alsa/pci/hda/snd-hda-intel.ko
/lib/modules/2.6.22.17-0.1-bigsmp/kernel/sound/pci/hda/snd-hda-intel.ko
/lib/modules/2.6.22.17-0.1-bigsmp/updates/alsa/pci/hda/snd-hda-intel.ko
/lib/modules/2.6.22.17-0.1-debug/kernel/sound/pci/hda/snd-hda-intel.ko
/lib/modules/2.6.22.17-0.1-debug/updates/alsa/pci/hda/snd-hda-intel.ko
The ALSA verion is 1.0.16
The modem cards detected by "aplay -l" are: None
The /proc/asound/pcm file reports:
-----------------------
00-00: ALC861VD Analog : ALC861VD Analog : playback 1 : capture 1
about /proc/asound/cards:
------------------------
0 [Intel ]: HDA-Intel - HDA Intel
HDA Intel at 0xfebf8000 irq 23
=== Finished firmware and bootup diagnostics, next deducing cogent software.
===
Predictive diagnostics for card in bus 00:1b.0:
Modem chipset detected on
NAME="Audio device: Intel Corporation 82801H "
CLASS=0403
PCIDEV=8086:284b
SUBSYS=1043:1339
IRQ=23
HDA=8086:284b
SOFT=8086:284b.HDA
ArchivedChip=0x10573055
IDENT=slmodemd
For candidate modem in: 00:1b.0
0403 Audio device: Intel Corporation 82801H
Primary device ID: 8086:284b
Subsystem PCI_id 1043:1339
Softmodem codec or chipset from diagnostics:
from Archives: 0x10573055
Support type needed or chipset: slmodemd
An ALSA (Advanced Linux Sound Architecture) modem driver:
provides Low Level support enabling contact with the modem hardware.
For all BUT Conexant chip soft modems (using hsfmodem software)
complementary High Level support is through a Smartlink utility: slmodemd
Download from http://linmodems.technion.ac.il/packages/smartlink/
the package SLMODEMD.gcc4.2.tar.gz having a compiled slmodemd. Unpack under
Linux with:
$ tar zxf SLMODEMD.gcc4.2.tar.gz
and read instructions therein. But briefly, the modem is setup with command:
slmodemd -c YOUR_COUNTRY --alsa hw:0,1_or_hw:0,6
reporting dynamic creation of ports:
/dev/ttySL0 --> /dev/pts/N , with N some number
Read DOCs/Smartlink.txt and Modem/DOCs/YourSystem.txt for follow through
guidance.
----------------end Softmodem section --------------
Writing DOCs/Intel.txt
Writing DOCs/Smartlink.txt
============ end Smartlink section =====================
Completed candidate modem analyses.
The base of the UDEV device file system is: /dev/.udev
Versions adequately match for the compiler installed: 4.2.1
and the compiler used in kernel assembly: 4.2.1
Minimal compiling resources appear complete:
make utility - /usr/bin/make
Compiler version 4.2
linuc_headers base folder /lib/modules/2.6.22.17-0.1-default/build
However some compilations and executable functions may need additional files,
in the FileNames.h (so called kernel "h"eaders) collection installed
in /usr/include/ .
For martian_modem, additional required packages are n. The also required
headers of package libc6 are commonly installed by default.
Compiling hsfmodem drivers does require linux-libc-dev and libc6-dev
packages, for kernels 2.6.24 and later versions.
In not included on your install CD, search for them at
http://packages.ubuntu.com
or comparable Repository for other Linux distros.
When compiling ALSA drivers, the utility "patch" will also be needed.
If a driver compilation fails, with message including some lack of some
FileName.h (stdio.h for example), then
Some additional kernel-header files need installation to /usr/include. The
minimal additional packages are libc6-dev
and any of its dependents, under Ubuntu linux-libc-dev
If an alternate ethernet connection is available,
$ apt-get update
$ apt-get -s install linux-kernel-devel
will install needed packages.
For Debian/Ubuntu related distributions, run the following command to display
the needed package list:
Otherwise packages have to be found through http://packages.ubuntu.com
Once downloaded and transferred into a Linux partition,
they can be installed alltogether with:
$ sudo dpkg -i *.deb
Checking pppd properties:
-rwxr-xr-x 1 root dialout 298784 22 set 2007 /usr/sbin/pppd
In case of an "error 17" "serial loopback" problem, see:
http://linmodems.technion.ac.il/linmodems/archive-sixth/msg02637.html
To enable dialout without Root permission do:
$ su - root (not for Ubuntu)
chmod a+x /usr/sbin/pppd
or under Ubuntu related Linuxes
chmod a+x /usr/sbin/pppd
Checking settings of: /etc/ppp/options
noipdefault
noauth
crtscts
lock
modem
asyncmap 0
nodetach
lcp-echo-interval 30
lcp-echo-failure 4
lcp-max-configure 60
lcp-restart 2
idle 600
noipx
file /etc/ppp/filters
In case of a message like:
Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html
Read Modem/DOCs/YourSystem.txt concerning other COMM channels: eth0 eth1
Which can interfere with Browser naviagation.
Don't worry about the following, it is for experts should trouble shooting be
necessary.
==========================================================
Checking for modem support lines:
--------------------------------------
/device/modem symbolic link:
slmodemd created symbolic link /dev/ttySL0:
Within /etc/udev/ files:
/etc/udev/rules.d/50-udev-default.rules:KERNEL=="mwave", NAME="modems/%k",
GROUP="uucp"
/etc/udev/rules.d/77-network.rules:SUBSYSTEM=="net", ENV{INTERFACE}=="ppp*|
ippp*|isdn*|plip*|lo*|irda*|dummy*|ipsec*|tun*|tap*|bond*|vlan*|modem*|dsl*",
GOTO="skip_ifup"
Within /etc/modprobe.conf files:
/etc/modprobe.conf:# Linux ACP modem (Mwave)
/etc/modprobe.conf~:# Linux ACP modem (Mwave)
Within any ancient /etc/devfs files:
Within ancient kernel 2.4.n /etc/module.conf files:
--------- end modem support lines --------
Can't succeed with this modem. Can you please help me?
ModemData.txt don't list the content of /proc/asound/card0/codec#1.
I'm adding it because I think it is significative:
Codec: LSI ID 1040
Address: 1
Vendor Id: 0x11c11040
Subsystem Id: 0x10431636
Revision Id: 0x100200
Modem Function Group: 0x1
Thanks a lot
Max
