Hi Clive, It looks like the brackets are still around the user/pass etc. in the file- you'll need to make sure they're not.. and double check in the terminal by typing 'cat /etc/wvdial.conf' you should see: .... ISDN = 0 ; Phone = 0198333713; Password = YOUR_PASSWORD_HERE ; Username = singdeep; ... Hope that helps :) Bjorn. Also, I'd recommend you comment out your password(at least) before you send this to the mailing list- someone can now use your internet account... So i'd recommend you change your pass ASAP. --- Margaret Cumming & Clive Oatley <stay@xxxxxxxxxxxxxxxxxxxx> wrote: > > > -----Original Message----- > From: Margaret Cumming & Clive Oatley > [mailto:stay@xxxxxxxxxxxxxxxxxxxx] > Sent: Wednesday, 16 July 2008 8:14 AM > To: 'Marvin Stodolsky' > Subject: RE: Clive Oatley , Australia, NetComm modem > branded "Mega-i-modem 56k CD2004" > > Dear Marvin, > I composed & saved as per (1), with (2) as the > result. I tried Phone, Username & Password with & > without < >s but made no difference to the result. > I'm finding the help notes hard to follow as not yet > used to Linux language i.e. not used to working in > the shell. > > Regards, > Clive > > 1)wvdial.conf > > [Dialer Defaults] > Init1 = ATZ > Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 Modem Type > = Analog Modem Baud = 115200 New PPPD = yes Modem = > /dev/ttyS0 ISDN = 0 ; Phone = <0198333713> ; > Password = <ab871208> ; Username = <singdeep> > > > 2)--> Initializing modem. > --> Sending: ATZ > OK > --> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 > ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 > OK > --> Modem initialized. > --> Configuration does not specify a valid phone > number. > --> Configuration does not specify a valid login > name. > --> Configuration does not specify a valid password. > ------------------------------------------------------------- > -----Original Message----- > From: Marvin Stodolsky > [mailto:marvin.stodolsky@xxxxxxxxx] > Sent: Tuesday, 15 July 2008 11:21 AM > To: Margaret Cumming & Clive Oatley > Cc: Discuss@xxxxxxxxxxxxx > Subject: Re: Clive Oatley , Australia, NetComm modem > branded "Mega-i-modem 56k CD2004" > Marge & Clive, > > Nothing you do under Linux will affect dual booting > or Microsoft performance. > RE: The manufacturer has advised that its chipset is > Conexant Doubtful. Or the wvdialconf test would have > failed. > Just put in your dialout info with: > $ sudo gedit /etc/wvdial.conf > Read the wvdial.txt for details > > Then you should be able to dial out with: > $ sudo wvdial > > MarvS > scanModem maintainer > > > On Mon, Jul 14, 2008 at 6:18 PM, Margaret Cumming & > Clive Oatley <stay@xxxxxxxxxxxxxxxxxxxx> wrote: > > Hi, > > Another newbie baby here. Can anyone help with a > driver for Ubuntu > > Hardy Heron? Oh, and also, will any changes I make > affect dual booting > > into Windows i.e. will the modem still work when I > boot into Windows > > after I've installed the software to make the > modem work under Linux? > > This is a NetComm modem branded "Mega-i-modem > CD2004" > > > > > ScanModem failed to find the modem as it was on a > serial port. > > > > Running "sudo wvdialconf /etc/wvdial.conf" gave > the result below: > > Scanning your serial ports for a modem. > > ttyS0<*1>: ATQ0 V1 E1 OK > > ttyS0<*1>: ATQ0 V1 E1 Z OK > > ttyS0<*1>: ATQ0 V1 E1 S0=0 OK > > ttyS0<*1>: ATQ0 V1 E1 S0=0 &C1 OK > > ttyS0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 OK > > ttyS0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 OK > > ttyS0<*1>: Modem Identifier: ATI IP568 > Data/Fax/Voice 56K Modem > > ttyS0<*1>: Speed 4800: AT OK > > ttyS0<*1>: Speed 9600: AT OK > > ttyS0<*1>: Speed 19200: AT OK > > ttyS0<*1>: Speed 38400: AT OK > > ttyS0<*1>: Speed 57600: AT OK > > ttyS0<*1>: Speed 115200: AT OK > > ttyS0<*1>: Max speed is 115200; that should be > safe. > > ttyS0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 OK > Modem Port Scan<*1>: > > S2 S3 Found a modem on /dev/ttyS0. > > Modem configuration written to /etc/wvdial.conf. > > ttyS0<Info>: Speed 115200; init "ATQ0 V1 E1 S0=0 > &C1 &D2 +FCLASS=0" > > > > Querying the modem gave the following ATI specs: > > ATI1 - External Controller Ver3.00, CheckSum=7F7D > > ATI2 - TEST OK! > > ATI3 - IP568 Data/Fax/Voice 56K Modem > > ATI4 - DSP Ver3.00 CheckSum=1CE7 > > ATI5 - Australia > > ATI6 - 1 > > ATI7 - Controller Ver3.00 Date:Jun 11 15:00 2004 > > > > Hardware ID: Serenum\ICP0001\5&23DE782&0&0000 > > > > This is the best I can do info-wise. Hope it's > enough. > > Thanks in advance, > > Clive > > > > > > > > > __________________________________________________________________ Instant Messaging, free SMS, sharing photos and more... Try the new Yahoo! Canada Messenger at http://ca.beta.messenger.yahoo.com/
