Mr Marvin,
I have to do modprobe snd-hda-intel for this result after I blacklisted
other things like you said.
This is my new ModemData.txt:
Only plain text email is forwarded by the Discuss@xxxxxxxxxxxxx List
Server,
as HTML can contain viruses. Use as the email Subject Line:
YourName, YourCountry Fedora release 8 (Werewolf)
Kernel kernel 2.6.24.7-92.fc8
With this Subject Line cogent experts will be alerted, and useful case
names left in the Archive.
YourCountry will enable Country specific guidance. Linux experts in
YourCountry
can be found through: http://www.linux.org/groups/index.html.
They will know your Country's modem code, which may be essential for
dialup service.
Responses from Discuss@xxxxxxxxxxxxx are sometimes blocked by an
Internet Provider mail filters.
So in a day, also check the Archived responses at
http://www.linmodems.org
-------------------------- System information
----------------------------
CPU=i686, Fedora release 8 (Werewolf)
Kernel
Linux version 2.6.24.7-92.fc8
(mockbuild@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx) (gcc version 4.1.2
20070925 (Red Hat 4.1.2-33)) #1 SMP Wed May 7 16:50:09 EDT 2008
scanModem update of: 2008_06_17
There are no blacklisted modem drivers in /etc/modprobe* files
Attached USB devices are:
ID 04f3:0210 Elan Microelectronics Corp.
USB modems not recognized
For candidate card in slot 00:1f.6, firmware information and bootup
diagnostics are:
PCI slot PCI ID SubsystemID Name
---------- --------- --------- --------------
00:1f.6 8086:24c6 14c0:0012 Modem: Intel Corporation
82801DB/DBL/DBM
Modem interrupt assignment and sharing:
17: 100 IO-APIC-fasteoi Intel 82801DB-ICH4, Intel
82801DB-ICH4 Modem
--- Bootup diagnostics for card in PCI slot 00:1f.6 ----
ACPI: PCI Interrupt 0000:00:1f.6[B] -> GSI 17 (level, low) -> IRQ 17
ACPI: PCI interrupt for device 0000:00:1f.6 disabled
ACPI: PCI Interrupt 0000:00:1f.6[B] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1f.6 to 64
The PCI slot 00:1f.6 of the modem card may be disabled early in
a bootup process, but then enabled later. If modem drivers load
but the modem is not responsive, read DOCs/Bootup.txt about possible
fixes.
Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx
if help is needed.
===== Advanced Linux Sound Architecture (ALSA) diagnostics =====
The ALSA packages provide audio support and also drivers for some
modems.
ALSA diagnostics are written during bootup to /proc/asound/ folders.
The ALSA verion is 1.0.15
The modem cards detected by "aplay -l" are:
card 1: Modem [Intel 82801DB-ICH4 Modem], device 0: Intel ICH - Modem
[Intel 82801DB-ICH4 Modem - Modem]
The /proc/asound/pcm file reports:
-----------------------
00-04: Intel ICH - IEC958 : Intel 82801DB-ICH4 - IEC958 : playback 1
00-03: Intel ICH - ADC2 : Intel 82801DB-ICH4 - ADC2 : capture 1
00-02: Intel ICH - MIC2 ADC : Intel 82801DB-ICH4 - MIC2 ADC : capture 1
00-01: Intel ICH - MIC ADC : Intel 82801DB-ICH4 - MIC ADC : capture 1
00-00: Intel ICH : Intel 82801DB-ICH4 : playback 1 : capture 1
01-00: Intel ICH - Modem : Intel 82801DB-ICH4 Modem - Modem : playback 1
: capture 1
about /proc/asound/cards:
------------------------
0 [I82801DBICH4 ]: ICH4 - Intel 82801DB-ICH4
Intel 82801DB-ICH4 with ALC202 at irq 17
1 [Modem ]: ICH-MODEM - Intel 82801DB-ICH4 Modem
Intel 82801DB-ICH4 Modem at irq 17
The driver snd-intel8x0m with its dependent drivers:
snd_intel8x0m 16589 0
snd_ac97_codec 92389 2 snd_intel8x0m,snd_intel8x0
snd_pcm 63685 4
snd_intel8x0m,snd_intel8x0,snd_ac97_codec,snd_pcm_oss
snd 43333 16
snd_intel8x0m,snd_intel8x0,snd_ac97_codec,snd_seq_oss,snd_seq,snd_seq_de
vice,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
snd_page_alloc 11209 3 snd_intel8x0m,snd_intel8x0,snd_pcm
----------
provide modem + audio support.
Lines in: /proc/asound/card1/codec97#0/mc97#1-1+regs
-------------------------------
0:7c = 5349 and 0:7e = 4c22
are translated from hexadecimal code into the modem chip identifier:
SIL22
The modem codec file for the HDA card is: 1
--------------------------------------------------------
===== Advanced Linux Sound Architecture (ALSA) diagnostics =====
The ALSA packages provide audio support and also drivers for some
modems.
ALSA diagnostics are written during bootup to /proc/asound/ folders.
The ALSA verion is 1.0.15
The modem cards detected by "aplay -l" are:
card 1: Modem [Intel 82801DB-ICH4 Modem], device 0: Intel ICH - Modem
[Intel 82801DB-ICH4 Modem - Modem]
The /proc/asound/pcm file reports:
-----------------------
00-04: Intel ICH - IEC958 : Intel 82801DB-ICH4 - IEC958 : playback 1
00-03: Intel ICH - ADC2 : Intel 82801DB-ICH4 - ADC2 : capture 1
00-02: Intel ICH - MIC2 ADC : Intel 82801DB-ICH4 - MIC2 ADC : capture 1
00-01: Intel ICH - MIC ADC : Intel 82801DB-ICH4 - MIC ADC : capture 1
00-00: Intel ICH : Intel 82801DB-ICH4 : playback 1 : capture 1
01-00: Intel ICH - Modem : Intel 82801DB-ICH4 Modem - Modem : playback 1
: capture 1
about /proc/asound/cards:
------------------------
0 [I82801DBICH4 ]: ICH4 - Intel 82801DB-ICH4
Intel 82801DB-ICH4 with ALC202 at irq 17
1 [Modem ]: ICH-MODEM - Intel 82801DB-ICH4 Modem
Intel 82801DB-ICH4 Modem at irq 17
The driver snd-intel8x0m with its dependent drivers:
snd_intel8x0m 16589 0
snd_ac97_codec 92389 2 snd_intel8x0m,snd_intel8x0
snd_pcm 63685 5
snd_hda_intel,snd_intel8x0m,snd_intel8x0,snd_ac97_codec,snd_pcm_oss
snd 43333 18
snd_hda_intel,snd_hwdep,snd_intel8x0m,snd_intel8x0,snd_ac97_codec,snd_se
q_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
snd_page_alloc 11209 4
snd_hda_intel,snd_intel8x0m,snd_intel8x0,snd_pcm
----------
provide modem + audio support.
Lines in: /proc/asound/card1/codec97#0/mc97#1-1+regs
-------------------------------
0:7c = 5349 and 0:7e = 4c22
are translated from hexadecimal code into the modem chip identifier:
SIL22
The modem codec file for the HDA card is: 1
--------------------------------------------------------
=== Finished firmware and bootup diagnostics, next deducing cogent
software. ===
Predictive diagnostics for card in bus 00:1f.6:
Modem chipset detected on
NAME="Modem: Intel Corporation 82801DB/DBL/DBM "
CLASS=0703
PCIDEV=8086:24c6
SUBSYS=14c0:0012
IRQ=17
SOFT=8086:24c6.MC97
CodecDiagnosed=SIL22
CodecClass=SIL
IDENT=slmodemd
SLMODEMD_DEVICE=modem:1
Driver=snd-hda-intel
For candidate modem in: 00:1f.6
0703 Modem: Intel Corporation 82801DB/DBL/DBM
Primary device ID: 8086:24c6
Subsystem PCI_id 14c0:0012
Softmodem codec or chipset from diagnostics: SIL22, a Smartlink type
from Archives:
This is a NEW softmodem case! Please send the output ModemData.txt
to DISCUSS@xxxxxxxxxxxxx to enrich the Archive and help others!
If further assistance is not needed, please use email Subject:
New Case Only
-------------------------------------------
Support type needed or chipset: slmodemd supporting the snd-hda-intel
audio+modem driver
An ALSA (Advanced Linux Sound Architecture) modem driver:
snd-hda-intel
provides Low Level support enabling contact with the modem hardware.
For all BUT Conexant chip soft modems (using hsfmodem software)
complementary High Level support is through a Smartlink utility:
slmodemd
Download from http://linmodems.technion.ac.il/packages/smartlink/
the package SLMODEMD.gcc4.1.tar.gz having a compiled slmodemd. Unpack
under Linux with:
$ tar zxf SLMODEMD.gcc4.1.tar.gz
and read instructions therein. But briefly, the modem is setup with
command:
slmodemd -c YOUR_COUNTRY --alsa modem:1
reporting dynamic creation of ports:
/dev/ttySL0 --> /dev/pts/N , with N some number
Read DOCs/Smartlink.txt and Modem/DOCs/YourSystem.txt for follow
through guidance.
----------------end Softmodem section --------------
Writing DOCs/Intel.txt
Writing DOCs/Smartlink.txt
============ end Smartlink section =====================
Completed candidate modem analyses.
The base of the UDEV device file system is: /dev/.udev
Versions adequately match for the compiler installed: 4.1.2
and the compiler used in kernel assembly: 4.1.2
Minimal compiling resources appear complete:
make utility - /usr/bin/make
Compiler version 4.1
linuc_headers base folder /lib/modules/2.6.24.7-92.fc8/build
However some compilations and executable functions may need additional
files,
in the FileNames.h (so called kernel "h"eaders) collection installed in
/usr/include/ .
For martian_modem, additional required packages are libc6-dev (and for
Debian/Ubuntu,
linux-libc-dev). The also required headers of package libc6 are
commonly installed by default.
Compiling hsfmodem drivers does require linux-libc-dev and libc6-dev
packages, for kernels 2.6.24 and later versions.
In not included on your install CD, search for them at
http://packages.ubuntu.com
or comparable Repository for other Linux distros.
When compiling ALSA drivers, the utility "patch" will also be needed.
If a driver compilation fails, with message including some lack of some
FileName.h (stdio.h for example), then
Some additional kernel-header files need installation to /usr/include.
The minimal additional packages are libc6-dev
and any of its dependents, under Ubuntu linux-libc-dev
If an alternate ethernet connection is available,
$ apt-get update
$ apt-get -s install linux-kernel-devel
will install needed packages.
For Debian/Ubuntu related distributions, run the following command to
display the needed package list:
Otherwise packages have to be found through http://packages.ubuntu.com
Once downloaded and transferred into a Linux partition,
they can be installed alltogether with:
$ sudo dpkg -i *.deb
Checking pppd properties:
-r-xr-xr-x 1 root root 312332 2006-12-01 19:54 /usr/sbin/pppd
In case of an "error 17" "serial loopback" problem, see:
http://linmodems.technion.ac.il/linmodems/archive-sixth/msg02637.html
To enable dialout without Root permission do:
$ su - root (not for Ubuntu)
chmod a+x /usr/sbin/pppd
or under Ubuntu related Linuxes
chmod a+x /usr/sbin/pppd
Checking settings of: /etc/ppp/options
lock
In case of a message like:
Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html
Read Modem/DOCs/YourSystem.txt concerning other COMM channels: virbr0
Which can interfere with Browser naviagation.
Don't worry about the following, it is for experts should trouble
shooting be necessary.
==========================================================
Checking for modem support lines:
--------------------------------------
/device/modem symbolic link:
slmodemd created symbolic link /dev/ttySL0:
Within /etc/udev/ files:
/etc/udev/rules.d/50-udev-default.rules:KERNEL=="mwave",
NAME="modems/mwave", GROUP="uucp"
Within /etc/modprobe.conf files:
Within any ancient /etc/devfs files:
Within ancient kernel 2.4.n /etc/module.conf files:
--------- end modem support lines --------
This is my scanout:
CLASS=0703
NAME="Modem: Intel Corporation 82801DB/DBL/DBM "
PCIDEV=8086:24c6
SUBSYS=14c0:0012
IRQ=17
SOFT=8086:24c6.MC97
CodecArchived=
HDA=
CodecDiagnosed=SIL22
slamrTest=
CodecClass=SIL
IDENT=slmodemd
SLMODEMD_DEVICE=modem:1
OPTS=
Driver=snd-hda-intel
