copia del mio modem
donato
CPU0
0: 70238 IO-APIC-edge timer
1: 442 IO-APIC-edge i8042
8: 30 IO-APIC-edge rtc
9: 4067 IO-APIC-fasteoi acpi
12: 45353 IO-APIC-edge i8042
14: 35332 IO-APIC-edge libata
15: 0 IO-APIC-edge libata
16: 3255 IO-APIC-fasteoi Intel ICH6
17: 1 IO-APIC-fasteoi yenta, tifm_7xx1, sdhci:slot0, sdhci:slot1, sdhci:slot2
18: 18717 IO-APIC-fasteoi ipw2200, eth0
19: 2 IO-APIC-fasteoi uhci_hcd:usb1, ehci_hcd:usb5
20: 120641 IO-APIC-fasteoi uhci_hcd:usb2
21: 0 IO-APIC-fasteoi uhci_hcd:usb3
22: 0 IO-APIC-fasteoi uhci_hcd:usb4, i915@pci:0000:00:02.0
23: 3 IO-APIC-fasteoi ohci1394
NMI: 0 Non-maskable interrupts
LOC: 27905 Local timer interrupts
RES: 0 Rescheduling interrupts
CAL: 0 function call interrupts
TLB: 0 TLB shootdowns
TRM: 0 Thermal event interrupts
SPU: 0 Spurious interrupts
ERR: 0
MIS: 0
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.24-19-generic (buildd@vernadsky) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Wed Jun 4 16:35:01 UTC 2008 (Ubuntu 2.6.24-19.33-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003f6e0000 (usable)
[ 0.000000] BIOS-e820: 000000003f6e0000 - 000000003f6eb000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003f6eb000 - 000000003f700000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003f700000 - 0000000040000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0006000 (reserved)
[ 0.000000] BIOS-e820: 00000000f0008000 - 00000000f000c000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] 118MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] Entering add_active_range(0, 0, 259808) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 259808
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 259808
[ 0.000000] On node 0 totalpages: 259808
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 237 pages used for memmap
[ 0.000000] HighMem zone: 30195 pages, LIFO batch:7
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] DMI present.
[ 0.000000] ACPI: RSDP signature @ 0xC00F76F0 checksum 0
[ 0.000000] ACPI: RSDP 000F76F0, 0014 (r0 HP )
[ 0.000000] ACPI: RSDT 3F6E5131, 0044 (r1 HP 09BC 6040000 LTP 0)
[ 0.000000] ACPI: FACP 3F6EAE88, 0074 (r1 HP 09BC 6040000 LOHR 5F)
[ 0.000000] ACPI: DSDT 3F6E59D6, 54B2 (r1 HP 09BC 6040000 MSFT 100000E)
[ 0.000000] ACPI: FACS 3F6FBFC0, 0040
[ 0.000000] ACPI: APIC 3F6EAEFC, 0068 (r1 HP 09BC 6040000 LOHR 5F)
[ 0.000000] ACPI: BOOT 3F6EAFD8, 0028 (r1 HP 09BC 6040000 LTP 1)
[ 0.000000] ACPI: MCFG 3F6EAF9C, 003C (r1 HP 09BC 6040000 LOHR 5F)
[ 0.000000] ACPI: SSDT 3F6E558D, 0235 (r1 HP 09BC 3000 INTL 20030224)
[ 0.000000] ACPI: SSDT 3F6E53B5, 01D8 (r1 HP 09BC 3001 INTL 20030224)
[ 0.000000] ACPI: SSDT 3F6E52A1, 0114 (r1 HP 09BC 3000 INTL 20030224)
[ 0.000000] ACPI: SSDT 3F6E5175, 012C (r1 HP 09BC 1 INTL 20030224)
[ 0.000000] ACPI: DMI detected: Hewlett-Packard
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 6:13 APIC version 20
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000)
[ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000dc000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000dc000 - 0000000000100000
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 257779
[ 0.000000] Kernel command line: root=UUID=99a09c00-f525-4705-9464-99584b8133d1 ro quiet splash locale=it_IT
[ 0.000000] mapped APIC to ffffb000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Detected 1596.475 MHz processor.
[ 7.541540] Console: colour VGA+ 80x25
[ 7.541544] console [tty0] enabled
[ 7.541916] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 7.542395] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 7.575495] Memory: 1017708k/1039232k available (2177k kernel code, 20784k reserved, 1006k data, 368k init, 121728k highmem)
[ 7.575503] virtual kernel memory layout:
[ 7.575505] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB)
[ 7.575506] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 7.575507] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 7.575509] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 7.575510] .init : 0xc0421000 - 0xc047d000 ( 368 kB)
[ 7.575511] .data : 0xc0320434 - 0xc041bdc4 (1006 kB)
[ 7.575513] .text : 0xc0100000 - 0xc0320434 (2177 kB)
[ 7.575516] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 7.575557] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
[ 7.655538] Calibrating delay using timer specific routine.. 3196.51 BogoMIPS (lpj=6393028)
[ 7.655568] Security Framework initialized
[ 7.655576] SELinux: Disabled at boot.
[ 7.655593] AppArmor: AppArmor initialized
[ 7.655597] Failure registering capabilities with primary security module.
[ 7.655605] Mount-cache hash table entries: 512
[ 7.655736] Initializing cgroup subsys ns
[ 7.655741] Initializing cgroup subsys cpuacct
[ 7.655755] CPU: After generic identify, caps: afe9fbff 00100000 00000000 00000000 00000180 00000000 00000000 00000000
[ 7.655767] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 7.655769] CPU: L2 cache: 2048K
[ 7.655772] CPU: After all inits, caps: afe9fbff 00100000 00000000 00002040 00000180 00000000 00000000 00000000
[ 7.655782] Compat vDSO mapped to ffffe000.
[ 7.655796] Checking 'hlt' instruction... OK.
[ 7.671944] SMP alternatives: switching to UP code
[ 7.673958] Freeing SMP alternatives: 11k freed
[ 7.674069] Early unpacking initramfs... done
[ 8.074690] ACPI: Core revision 20070126
[ 8.074764] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[ 8.101390] CPU0: Intel(R) Pentium(R) M processor 1.60GHz stepping 08
[ 8.101417] Total of 1 processors activated (3196.51 BogoMIPS).
[ 8.101607] ENABLING IO-APIC IRQs
[ 8.101797] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 8.247248] Brought up 1 CPUs
[ 8.247278] CPU0 attaching sched-domain:
[ 8.247281] domain 0: span 01
[ 8.247283] groups: 01
[ 8.247453] net_namespace: 64 bytes
[ 8.247463] Booting paravirtualized kernel on bare hardware
[ 8.247950] Time: 17:36:10 Date: 06/19/08
[ 8.247976] NET: Registered protocol family 16
[ 8.248173] EISA bus registered
[ 8.248200] ACPI: bus type pci registered
[ 8.248714] PCI: PCI BIOS revision 2.10 entry at 0xfd850, last bus=7
[ 8.248717] PCI: Using configuration type 1
[ 8.248733] Setting up standard PCI resources
[ 8.258059] ACPI: EC: Look up EC in DSDT
[ 8.259458] ACPI: Interpreter enabled
[ 8.259462] ACPI: (supports S0 S3 S4 S5)
[ 8.259476] ACPI: Using IOAPIC for interrupt routing
[ 8.261913] ACPI: EC: non-query interrupt received, switching to interrupt mode
[ 8.264123] ACPI: EC: GPE = 0x1b, I/O: command/status = 0x66, data = 0x62
[ 8.264128] ACPI: EC: driver started in interrupt mode
[ 8.264170] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 8.264904] Force enabled HPET at base address 0xfed00000
[ 8.264911] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
[ 8.264915] PCI quirk: region 1180-11bf claimed by ICH6 GPIO
[ 8.265667] PCI: Transparent bridge - 0000:00:1e.0
[ 8.265748] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 8.265989] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 8.266124] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[ 8.268432] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 8.268522] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 8.268610] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 8.268697] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 8.268783] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 8.268870] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 8.268956] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 8.269042] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 8.269160] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 8.269193] pnp: PnP ACPI init
[ 8.269200] ACPI: bus type pnp registered
[ 8.271186] pnp: PnP ACPI: found 8 devices
[ 8.271189] ACPI: ACPI bus type pnp unregistered
[ 8.271218] PnPBIOS: Disabled by ACPI PNP
[ 8.271496] PCI: Using ACPI for IRQ routing
[ 8.271499] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 8.271503] PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.0
[ 8.271505] PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.0
[ 8.271508] PCI: Cannot allocate resource region 9 of bridge 0000:00:1c.0
[ 8.307176] NET: Registered protocol family 8
[ 8.307179] NET: Registered protocol family 20
[ 8.307346] hpet clockevent registered
[ 8.307352] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 8.307357] hpet0: 3 64-bit timers, 14318180 Hz
[ 8.308393] AppArmor: AppArmor Filesystem Enabled
[ 8.311167] Time: tsc clocksource has been installed.
[ 8.319201] system 00:04: ioport range 0x200-0x20f has been reserved
[ 8.319204] system 00:04: ioport range 0x800-0x80f has been reserved
[ 8.319208] system 00:04: ioport range 0x1000-0x107f has been reserved
[ 8.319211] system 00:04: ioport range 0x1180-0x11bf has been reserved
[ 8.319214] system 00:04: iomem range 0xe0000000-0xefffffff could not be reserved
[ 8.319218] system 00:04: iomem range 0xf0000000-0xf0003fff could not be reserved
[ 8.319221] system 00:04: iomem range 0xf0004000-0xf0004fff could not be reserved
[ 8.319224] system 00:04: iomem range 0xf0005000-0xf0005fff could not be reserved
[ 8.319228] system 00:04: iomem range 0xf0008000-0xf000bfff could not be reserved
[ 8.319231] system 00:04: iomem range 0xfed20000-0xfed8ffff could not be reserved
[ 8.349642] PCI: Bridge: 0000:00:1c.0
[ 8.349644] IO window: disabled.
[ 8.349649] MEM window: disabled.
[ 8.349653] PREFETCH window: disabled.
[ 8.349662] PCI: Bus 7, cardbus bridge: 0000:06:06.0
[ 8.349665] IO window: 00003400-000034ff
[ 8.349670] IO window: 00003800-000038ff
[ 8.349675] PREFETCH window: 54000000-57ffffff
[ 8.349680] MEM window: 58000000-5bffffff
[ 8.349686] PCI: Bridge: 0000:00:1e.0
[ 8.349689] IO window: 3000-3fff
[ 8.349695] MEM window: b0100000-b01fffff
[ 8.349699] PREFETCH window: disabled.
[ 8.349729] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 16
[ 8.349737] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 8.349750] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 8.349767] ACPI: PCI Interrupt 0000:06:06.0[A] -> GSI 22 (level, low) -> IRQ 17
[ 8.349774] PCI: Setting latency timer of device 0000:06:06.0 to 64
[ 8.349785] NET: Registered protocol family 2
[ 8.387185] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 8.387427] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 8.388318] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 8.388895] TCP: Hash tables configured (established 131072 bind 65536)
[ 8.388899] TCP reno registered
[ 8.399283] checking if image is initramfs... it is
[ 8.810874] Switched to high resolution mode on CPU 0
[ 9.183606] Freeing initrd memory: 7712k freed
[ 9.183854] Simple Boot Flag at 0x36 set to 0x1
[ 9.184299] audit: initializing netlink socket (disabled)
[ 9.184316] audit(1213896970.484:1): initialized
[ 9.184506] highmem bounce pool size: 64 pages
[ 9.186524] VFS: Disk quotas dquot_6.5.1
[ 9.186630] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 9.186787] io scheduler noop registered
[ 9.186789] io scheduler anticipatory registered
[ 9.186791] io scheduler deadline registered
[ 9.186804] io scheduler cfq registered (default)
[ 9.186819] Boot video device is 0000:00:02.0
[ 9.187029] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 9.187082] assign_interrupt_mode Found MSI capability
[ 9.187130] Allocate Port Service[0000:00:1c.0:pcie00]
[ 9.187172] Allocate Port Service[0000:00:1c.0:pcie02]
[ 9.187438] isapnp: Scanning for PnP cards...
[ 9.541434] isapnp: No Plug & Play device found
[ 9.569857] Real Time Clock Driver v1.12ac
[ 9.569972] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 9.570806] ACPI: PCI Interrupt 0000:00:1e.3[B] -> GSI 20 (level, low) -> IRQ 18
[ 9.570817] ACPI: PCI interrupt for device 0000:00:1e.3 disabled
[ 9.571456] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 9.571531] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 9.571628] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 9.577390] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 9.580556] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 9.580560] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 9.580563] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 9.580565] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 9.580568] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 9.582362] mice: PS/2 mouse device common for all mice
[ 9.582485] EISA: Probing bus 0 at eisa.0
[ 9.582492] Cannot allocate resource for EISA slot 1
[ 9.582495] Cannot allocate resource for EISA slot 2
[ 9.582497] Cannot allocate resource for EISA slot 3
[ 9.582518] EISA: Detected 0 cards.
[ 9.582522] cpuidle: using governor ladder
[ 9.582524] cpuidle: using governor menu
[ 9.582623] NET: Registered protocol family 1
[ 9.582653] Using IPI No-Shortcut mode
[ 9.582690] registered taskstats version 1
[ 9.582811] Magic number: 12:810:643
[ 9.582909] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 9.582911] EDD information not available.
[ 9.583125] Freeing unused kernel memory: 368k freed
[ 9.610275] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 10.026436] atkbd.c: Spurious NAK on isa0060/serio0. Some program might be trying access hardware directly.
[ 10.226333] atkbd.c: Spurious NAK on isa0060/serio0. Some program might be trying access hardware directly.
[ 10.426143] atkbd.c: Spurious NAK on isa0060/serio0. Some program might be trying access hardware directly.
[ 10.626039] atkbd.c: Spurious NAK on isa0060/serio0. Some program might be trying access hardware directly.
[ 10.815063] fuse init (API version 7.9)
[ 10.836286] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3] C4[C3])
[ 10.839152] ACPI: Thermal Zone [THR0] (36 C)
[ 10.840416] ACPI: Invalid passive threshold
[ 10.840846] ACPI: Thermal Zone [THR1] (31 C)
[ 11.483620] usbcore: registered new interface driver usbfs
[ 11.483649] usbcore: registered new interface driver hub
[ 11.493371] usbcore: registered new device driver usb
[ 11.503733] USB Universal Host Controller Interface driver v3.0
[ 11.503803] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 19
[ 11.503816] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 11.503821] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 11.504178] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 11.504211] uhci_hcd 0000:00:1d.0: irq 19, io base 0x00001820
[ 11.504355] usb usb1: configuration #1 chosen from 1 choice
[ 11.504379] hub 1-0:1.0: USB hub found
[ 11.504386] hub 1-0:1.0: 2 ports detected
[ 11.604980] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 20
[ 11.604994] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 11.604999] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 11.605024] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 11.605056] uhci_hcd 0000:00:1d.1: irq 20, io base 0x00001840
[ 11.605175] usb usb2: configuration #1 chosen from 1 choice
[ 11.605199] hub 2-0:1.0: USB hub found
[ 11.605205] hub 2-0:1.0: 2 ports detected
[ 11.652837] 8139too Fast Ethernet driver 0.9.28
[ 11.704590] SCSI subsystem initialized
[ 11.713095] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 21
[ 11.713110] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 11.713115] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 11.713138] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[ 11.713170] uhci_hcd 0000:00:1d.2: irq 21, io base 0x00001860
[ 11.713295] usb usb3: configuration #1 chosen from 1 choice
[ 11.713319] hub 3-0:1.0: USB hub found
[ 11.713325] hub 3-0:1.0: 2 ports detected
[ 11.760758] libata version 3.00 loaded.
[ 11.816835] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 22
[ 11.816849] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[ 11.816854] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 11.816877] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[ 11.816911] uhci_hcd 0000:00:1d.3: irq 22, io base 0x00001880
[ 11.817026] usb usb4: configuration #1 chosen from 1 choice
[ 11.817050] hub 4-0:1.0: USB hub found
[ 11.817056] hub 4-0:1.0: 2 ports detected
[ 11.920855] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 19
[ 11.920871] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 11.920875] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 11.920900] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[ 11.924818] ehci_hcd 0000:00:1d.7: debug port 1
[ 11.924824] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[ 11.924832] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xb0040000
[ 11.952621] usb 2-1: new full speed USB device using uhci_hcd and address 2
[ 11.964607] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 11.964739] usb usb5: configuration #1 chosen from 1 choice
[ 11.964766] hub 5-0:1.0: USB hub found
[ 11.964772] hub 5-0:1.0: 8 ports detected
[ 12.068759] ACPI: PCI Interrupt 0000:06:07.0[A] -> GSI 20 (level, low) -> IRQ 18
[ 12.069632] eth0: RealTek RTL8139 at 0x3000, 00:0a:e4:d1:bc:ca, IRQ 18
[ 12.069635] eth0: Identified 8139 chip type 'RTL-8100B/8139D'
[ 12.071582] ACPI: PCI Interrupt 0000:06:06.2[C] -> GSI 21 (level, low) -> IRQ 23
[ 12.121361] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[23] MMIO=[b0108000-b01087ff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 12.122820] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 12.124673] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 21
[ 12.124708] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 12.124721] ACPI: PCI interrupt for device 0000:00:1f.1 disabled
[ 12.129312] ata_piix 0000:00:1f.1: version 2.12
[ 12.129324] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 21
[ 12.129354] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 12.130288] scsi0 : ata_piix
[ 12.130800] scsi1 : ata_piix
[ 12.131349] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14
[ 12.131353] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15
[ 12.456950] ata1.00: ATA-6: FUJITSU MHT2080AT PL, 0022, max UDMA/100
[ 12.456955] ata1.00: 156301488 sectors, multi 16: LBA
[ 12.456984] ata1.01: ATAPI: HL-DT-ST DVD-RW GCA-4080N, 0C35, max MWDMA2
[ 12.472717] ata1.00: configured for UDMA/100
[ 12.568186] usb 2-1: new full speed USB device using uhci_hcd and address 3
[ 12.644504] ata1.01: configured for MWDMA2
[ 12.644551] ata2: port disabled. ignoring.
[ 12.644691] scsi 0:0:0:0: Direct-Access ATA FUJITSU MHT2080A 0022 PQ: 0 ANSI: 5
[ 12.645330] scsi 0:0:1:0: CD-ROM HL-DT-ST DVD-RW GCA-4080N 0C35 PQ: 0 ANSI: 5
[ 12.659597] Driver 'sd' needs updating - please use bus_type methods
[ 12.659676] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
[ 12.659690] sd 0:0:0:0: [sda] Write Protect is off
[ 12.659692] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 12.659709] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 12.659759] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
[ 12.659770] sd 0:0:0:0: [sda] Write Protect is off
[ 12.659772] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 12.659788] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 12.659792] sda:<4>Driver 'sr' needs updating - please use bus_type methods
[ 12.673428] sda1 sda2 < sda5 >
[ 12.674981] sd 0:0:0:0: [sda] Attached SCSI disk
[ 12.680958] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 12.680980] sr 0:0:1:0: Attached scsi generic sg1 type 5
[ 12.696811] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[ 12.696815] Uniform CD-ROM driver Revision: 3.20
[ 12.696865] sr 0:0:1:0: Attached scsi CD-ROM sr0
[ 12.725956] usb 2-1: configuration #1 chosen from 1 choice
[ 12.804014] Clocksource tsc unstable (delta = -21056473719 ns)
[ 12.808008] Time: hpet clocksource has been installed.
[ 12.831723] Attempting manual resume
[ 12.831726] swsusp: Resume From Partition 8:5
[ 12.831728] PM: Checking swsusp image.
[ 12.831879] PM: Resume from disk failed.
[ 12.848760] kjournald starting. Commit interval 5 seconds
[ 12.848768] EXT3-fs: mounted filesystem with ordered data mode.
[ 12.900597] ieee1394: Host added: ID:BUS[0-00:1023] GUID[05e40a000a2a5017]
[ 16.795908] Linux agpgart interface v0.102
[ 16.895912] input: PC Speaker as /devices/platform/pcspkr/input/input2
[ 16.963805] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 17.027788] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 17.211608] intel_rng: FWH not detected
[ 17.251625] agpgart: Detected an Intel 915GM Chipset.
[ 17.252105] agpgart: Detected 7932K stolen memory.
[ 17.269369] agpgart: AGP aperture is 256M @ 0xc0000000
[ 17.569884] input: Power Button (FF) as /devices/virtual/input/input3
[ 17.595364] ACPI: Power Button (FF) [PWRF]
[ 17.595438] input: Lid Switch as /devices/virtual/input/input4
[ 17.608137] ACPI: Lid Switch [LID0]
[ 17.608217] input: Sleep Button (CM) as /devices/virtual/input/input5
[ 17.608251] iTCO_vendor_support: vendor-support=0
[ 17.635340] ACPI: Sleep Button (CM) [SLPB]
[ 17.635413] input: Power Button (CM) as /devices/virtual/input/input6
[ 17.663321] ACPI: Power Button (CM) [PWB]
[ 17.663887] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
[ 17.663965] iTCO_wdt: Found a ICH6-M TCO device (Version=2, TCOBASE=0x1060)
[ 17.663999] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 17.735387] ACPI: WMI-Acer: Mapper loaded
[ 18.110718] ieee80211_crypt: registered algorithm 'NULL'
[ 18.269870] ieee80211: 802.11 data/management/control stack, git-1.1.13
[ 18.269875] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@xxxxxxxxxxxxxxx>
[ 18.503291] Yenta: CardBus bridge found at 0000:06:06.0 [103c:3081]
[ 18.503315] Yenta: Enabling burst memory read transactions
[ 18.503321] Yenta: Using CSCINT to route CSC interrupts to PCI
[ 18.503323] Yenta: Routing CardBus interrupts to PCI
[ 18.503329] Yenta TI: socket 0000:06:06.0, mfunc 0x01aa1b02, devctl 0x64
[ 18.682587] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq
[ 18.682591] ipw2200: Copyright(c) 2003-2006 Intel Corporation
[ 18.739325] Yenta: ISA IRQ mask 0x0cf8, PCI irq 17
[ 18.739330] Socket status: 30000006
[ 18.739333] Yenta: Raising subordinate bus# of parent bus (#06) from #07 to #0a
[ 18.739339] pcmcia: parent PCI bridge I/O window: 0x3000 - 0x3fff
[ 18.739342] cs: IO port probe 0x3000-0x3fff: clean.
[ 18.739598] pcmcia: parent PCI bridge Memory window: 0xb0100000 - 0xb01fffff
[ 18.778741] ACPI: PCI Interrupt 0000:06:06.3[A] -> GSI 22 (level, low) -> IRQ 17
[ 18.778849] ACPI: PCI Interrupt 0000:06:05.0[A] -> GSI 20 (level, low) -> IRQ 18
[ 18.819080] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input7
[ 18.842473] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 18.854445] ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
[ 19.007356] sdhci: Secure Digital Host Controller Interface driver
[ 19.007361] sdhci: Copyright(c) Pierre Ossman
[ 19.186684] atkbd.c: Spurious NAK on isa0060/serio0. Some program might be trying access hardware directly.
[ 19.386587] atkbd.c: Spurious NAK on isa0060/serio0. Some program might be trying access hardware directly.
[ 19.870498] input: PS/2 Mouse as /devices/virtual/input/input8
[ 19.919179] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio4/input/input9
[ 20.017742] ACPI: AC Adapter [AC] (on-line)
[ 20.144482] ACPI: Battery Slot [BAT0] (battery present)
[ 20.342099] Bluetooth: Core ver 2.11
[ 20.344057] NET: Registered protocol family 31
[ 20.344060] Bluetooth: HCI device and connection manager initialized
[ 20.344064] Bluetooth: HCI socket layer initialized
[ 20.362163] Bluetooth: HCI USB driver ver 2.9
[ 20.364301] usbcore: registered new interface driver hci_usb
[ 21.510610] cs: IO port probe 0x100-0x3af: clean.
[ 21.512277] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
[ 21.513012] cs: IO port probe 0x820-0x8ff: clean.
[ 21.513609] cs: IO port probe 0xc00-0xcf7: clean.
[ 21.514363] cs: IO port probe 0xa00-0xaff: clean.
[ 21.547312] ipw2200: Detected geography ZZR (14 802.11bg channels, 0 802.11a channels)
[ 21.547340] sdhci: SDHCI controller found at 0000:06:06.4 [104c:8034] (rev 0)
[ 21.547364] ACPI: PCI Interrupt 0000:06:06.4[A] -> GSI 22 (level, low) -> IRQ 17
[ 21.547390] sdhci:slot0: Will use DMA mode even though HW doesn't fully claim to support it.
[ 21.547433] mmc0: SDHCI at 0xb0109000 irq 17 DMA
[ 21.547444] sdhci:slot1: Will use DMA mode even though HW doesn't fully claim to support it.
[ 21.547472] mmc1: SDHCI at 0xb0108c00 irq 17 DMA
[ 21.547482] sdhci:slot2: Will use DMA mode even though HW doesn't fully claim to support it.
[ 21.547509] mmc2: SDHCI at 0xb0108800 irq 17 DMA
[ 21.552581] ACPI: PCI Interrupt 0000:00:1e.2[A] -> GSI 17 (level, low) -> IRQ 16
[ 21.552598] PCI: Setting latency timer of device 0000:00:1e.2 to 64
[ 21.698655] intel8x0_measure_ac97_clock: measured 55481 usecs
[ 21.698660] intel8x0: clocking to 48000
[ 21.806577] lp: driver loaded but no devices found
[ 22.005712] Adding 3004112k swap on /dev/sda5. Priority:-1 extents:1 across:3004112k
[ 22.092230] EXT3 FS on sda1, internal journal
[ 22.150353] device-mapper: uevent: version 1.0.3
[ 22.150385] device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@xxxxxxxxxx
[ 22.586099] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 22.894385] No dock devices found.
[ 23.587133] ppdev: user-space parallel port driver
[ 23.610246] audit(1213897022.109:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=5019 profile="/usr/sbin/cupsd" namespace="default"
[ 23.644339] apm: BIOS not found.
[ 52.229754] Marking TSC unstable due to: cpufreq changes.
[ 40.132045] eth0: link down
[ 26.872814] Bluetooth: L2CAP ver 2.9
[ 26.872819] Bluetooth: L2CAP socket layer initialized
[ 53.882443] Bluetooth: RFCOMM socket layer initialized
[ 53.882464] Bluetooth: RFCOMM TTY layer initialized
[ 53.882469] Bluetooth: RFCOMM ver 1.8
[ 34.707448] [drm] Initialized drm 1.1.0 20060810
[ 34.711639] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 22
[ 34.711648] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 34.711727] [drm] Initialized i915 1.6.0 20060119 on minor 0
[ 65.809875] NET: Registered protocol family 10
[ 65.810608] lo: Disabled Privacy Extensions
[ 65.811567] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 70.256997] eth1: no IPv6 routers present
[ 35.407573] NET: Registered protocol family 17
[ 35.568185] ieee80211_crypt: registered algorithm 'TKIP'
[ 39.030851] eth1: no IPv6 routers present
Only plain text email is forwarded by the Discuss@xxxxxxxxxxxxx List Server,
as HTML can contain viruses. Use as the email Subject Line:
YourName, YourCountry kernel 2.6.24-19-generic
With this Subject Line cogent experts will be alerted, and useful case names left in the Archive.
YourCountry will enable Country specific guidance. Linux experts in YourCountry
can be found through: http://www.linux.org/groups/index.html.
They will know your Country's modem code, which may be essential for dialup service.
Responses from Discuss@xxxxxxxxxxxxx are sometimes blocked by an Internet Provider mail filters.
So in a day, also check the Archived responses at http://www.linmodems.org
-------------------------- System information ----------------------------
CPU=i686,
Linux version 2.6.24-19-generic (buildd@vernadsky) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Wed Jun 4 16:35:01 UTC 2008
scanModem update of: 2008_06_17
There are no blacklisted modem drivers in /etc/modprobe* files
Attached USB devices are:
ID 03f0:011d Hewlett-Packard
USB modems not recognized
For candidate card in slot 00:1e.3, firmware information and bootup diagnostics are:
PCI slot PCI ID SubsystemID Name
---------- --------- --------- --------------
00:1e.3 8086:266d 103c:3081 Modem: Intel Corporation 82801FB/FBM/FR/FW/FRW
Modem interrupt assignment and sharing:
18: 18716 IO-APIC-fasteoi ipw2200, eth0
--- Bootup diagnostics for card in PCI slot 00:1e.3 ----
[ 9.570806] ACPI: PCI Interrupt 0000:00:1e.3[B] -> GSI 20 (level, low) -> IRQ 18
[ 9.570817] ACPI: PCI interrupt for device 0000:00:1e.3 disabled
The PCI slot 00:1e.3 of the modem card may be disabled early in
a bootup process, but then enabled later. If modem drivers load
but the modem is not responsive, read DOCs/Bootup.txt about possible fixes.
Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx
if help is needed.
