I have recommended the hsfmodem driver because scanModem reported the following:
For candidate card in slot 00:1b.0, firmware information and bootup diagnostics are:
PCI slot PCI ID SubsystemID Name
---------- --------- --------- --------------
00:1b.0 8086:284b 1462:3ff3 Audio device: Intel Corporation 82801H
Modem interrupt assignment and sharing:
20: 447 428 IO-APIC-fasteoi HDA Intel
--- Bootup diagnostics for card in PCI slot 00:1b.0 ----
[ 31.236791] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 20 (level, low) -> IRQ 20
[ 31.237290] PCI: Setting latency timer of device 0000:00:1b.0 to 64
Predictive diagnostics for card in bus 00:1b.0:
Modem chipset not detected on
CLASS="Class 0403: 8086:284b"
NAME="Audio device: Intel Corporation 82801H "
SUBSYS=1462:3ff3
PCIDEV=8086:284b
IRQ=20
HDA=8086:284b
SOFT=8086:284b.HDA
Support type needed or chipset:
Support can likely be achieved through two mutually exclusive alternatives:
1) The hsfmodem software for Conexant chipset modems: Read DOCs/Conexant.txt
The following ALSA alternative CANNOT work with Conexant modems.
2) An ALSA modem driver plus slmodemd. Read DOCs/Smartlink.txt for details, and
to test get the package SLMODEMD.gcc4.2.tar.gz from:
http://linmodems.technion.ac.il/packages/smartlink/
----------------end Softmodem section --------------
Writing DOCs/Intel.txt
For owners of a Dell PCs with Conexant HSF modems, a driver source package with full speed enabled is available, but requires driver compiling. Read DOCs/Conexant.txt
>From http://www.linuxant.com/drivers/hsf/full/downloads-ubuntu-x86.php
download hsfmodem-7.68.00.07full_k2.6.24_18_generic_ubuntu_i386.deb.zip
Under Linux unpack with:
$ unzip hsfmodem*.zip
Then install with:
$ sudo dpkg -i hsfmodem*.deb
Subsequently, the modem should be found with
$ sudo wvdialconf /etc/wvdial.conf
Edit in your personal information with:
$ sudo gedit /etc/wvdial.conf
and try dialing out with:
$ sudo wvdial.
See DOCs/Testing.txt for details.
Read DOCs/Conexant.txt
But installation failed since the driver from linuxant website is for x86 and not for x86_64. He will try the generic tar.gz file for x86_64.
Regards,
Antonio
--- On Thu, 6/12/08, Marvin Stodolsky <marvin.stodolsky@xxxxxxxxx> wrote:
> From: Marvin Stodolsky <marvin.stodolsky@xxxxxxxxx>
> Subject: Re: Khaja Canada Help for Agere Soft Modem
> To: "Ubiquitous Pervasive" <ubiq3005@xxxxxxxxx>
> Cc: discuss@xxxxxxxxxxxxx
> Date: Thursday, June 12, 2008, 2:46 PM
> Khaja
>
> Under
> CPU=x86_64, Linux version 2.6.24-18-generic (buildd@king)
> with Agere Modem Vendor ID 11C1 and Product ID = 1040
> on the High Definition Audio card, there is currently no
> support under Linux.
>
> If you upgrade your System to Ubuntu Feisty (2.6.22
> kernels) or Hardy
> (2.6.24 kernels) there is an option. BUT it will/may work
> under one
> particular kernel.
> There is information on this modem family using agrmodem +
> agrserial
> drivers in
> http://linmodems.technion.ac.il/packages/ltmodem/11c11040/
> the agrsm_howto.txt
> You could install the 15 MB
> linux-image-2.6.21.0-22_2.6.21.0-22_i386.deb
> with:
> $ sudo dpkg -i linux*.deb
> which would include the agrmodem + agrserial drivers, but
> they will
> ONLY serve under the 2.6.21.0-22 kernel.
>
> The alternative is to read the InfoGeneral.txt about other
> modem hardware.
>
> Condolences,
>
> MarvS
> scanModem maintainer
>
> On Thu, Jun 12, 2008 at 5:12 PM, Ubiquitous Pervasive
> <ubiq3005@xxxxxxxxx> wrote:
> > Hi,
> > I am running Ubuntu 8.04. Kernel 2.6.24_14, AMD 64 bit
> version.
> > I have Agere Modem Vendor ID 11C1 and Product ID =
> 1040. I tried the
> > latest martian-full package but it failed to compile.
> >
> > I also have few questions:
> > * Do this modem work in my system?
> > * If I compile it on 32 bit version computer will it
> work in my system.
> >
> > I am sending ModemData.txt with this email. Thank you
> for your help.
> >
> > Khaja
> >
> > Send instant messages to your online friends
> http://uk.messenger.yahoo.com
