Masoud, for one of your modems, the INTEL 536 drivers can be found http://linmodems.technion.ac.il/packages/intel/Philippe.Vouters/intel-536EP-2.56.76.0_2008_03_22.tar.bz2 The one above is the latest one, which should work. Download it and read the directions. Regards, Antonio On 6/9/08, Masoud Abdar <mas.abdar@xxxxxxxxx> wrote: > Only plain text email is forwarded by the Discuss@xxxxxxxxxxxxx List > Server, > as HTML can contain viruses. Use as the email Subject Line: > YourName, YourCountry kernel 2.6.24-16-generic > With this Subject Line cogent experts will be alerted, and useful > case names left in the Archive. > YourCountry will enable Country specific guidance. Your contry's > local Linux experts > can be found through: http://www.linux.org/groups/index.html > Responses from Discuss@xxxxxxxxxxxxx are sometimes blocked by an > Internet Provider mail filters. > So in a day, also check the Archived responses at http://www.linmodems.org > -------------------------- System information ---------------------------- > CPU=i686, > Linux version 2.6.24-16-generic (buildd@palmer) (gcc version 4.2.3 > (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Thu Apr 10 13:23:42 UTC 2008 > scanModem update of: 2007-12-07 > > > There are no blacklisted modem drivers in /etc/modprobe* files > > The Advanced Linux Sound Architecture (ALSA) packages providing audio > support on your System, > also includes drivers for some modems. High Definition Audio (HDA) > cards can themselves host > a softmodem chipset, with both audio+modem supported by a snd-hda-intel > driver. > The ALSA diagnostics are written during bootup to /proc/asound/ folders. > > > The modem codec file for the the HDA card is: /proc/asound/card0/codec#0 > -------------------------------------------------------- > Codec: Analog Devices AD1986A > Address: 0 > Vendor Id: 0x11d41986 > Subsystem Id: 0x1043818f > Revision Id: 0x100500 > No Modem Function Group found > Default PCM: > rates [0x7f]: 8000 11025 16000 22050 32000 44100 48000 > bits [0xe]: 16 20 24 > formats [0x1]: PCM > Default Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 > Default Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=1 > GPIO: io=0, o=1, i=0, unsolicited=0, wake=0 > Node 0x02 [Audio Output] wcaps 0x30311: Stereo Digital > Converter: stream=0, channel=0 > Digital: > Digital category: 0x0 > PCM: > rates [0x60]: 44100 48000 > bits [0x2]: 16 > formats [0x5]: PCM AC3 > Delay: 3 samples > Connection: 2 > 0x01* 0x06 > Node 0x03 [Audio Output] wcaps 0x44d: Stereo Amp-Out > Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1 > Amp-Out vals: [0x19 0x19] > Converter: stream=0, channel=0 > Power: setting=D0, actual=D0 > Processing caps: benign=1, ncoeff=70 > Node 0x04 [Audio Output] wcaps 0x40d: Stereo Amp-Out > Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1 > Amp-Out vals: [0x19 0x19] > Converter: stream=0, channel=4 > Power: setting=D0, actual=D0 > Node 0x05 [Audio Output] wcaps 0x40d: Stereo Amp-Out > Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1 > Amp-Out vals: [0x19 0x19] > Converter: stream=0, channel=2 > Power: setting=D0, actual=D0 > Node 0x06 [Audio Input] wcaps 0x100511: Stereo > Converter: stream=0, channel=0 > SDI-Select: 0 > PCM: > rates [0x7f]: 8000 11025 16000 22050 32000 44100 48000 > bits [0x6]: 16 20 > formats [0x1]: PCM > Power: setting=D0, actual=D0 > Connection: 1 > 0x12 > Node 0x07 [Audio Mixer] wcaps 0x200101: Stereo > Connection: 8 > 0x03 0x09 0x13 0x14 0x15 0x16 0x17 0x18 > Node 0x08 [Audio Mixer] wcaps 0x200100: Mono > Connection: 1 > 0x07 > Node 0x09 [Audio Mixer] wcaps 0x20010e: Mono Amp-In Amp-Out > Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 > Amp-In vals: [0x80] [0x80] > Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 > Amp-Out vals: [0x80] > Connection: 2 > 0x04 0x05 > Node 0x0a [Audio Selector] wcaps 0x300101: Stereo > Connection: 3 > 0x07* 0x04 0x05 > Node 0x0b [Audio Selector] wcaps 0x300101: Stereo > Connection: 2 > 0x07* 0x04 > Node 0x0c [Audio Selector] wcaps 0x300101: Stereo > Connection: 2 > 0x04* 0x07 > Node 0x0d [Audio Selector] wcaps 0x300101: Stereo > Connection: 2 > 0x05* 0x08 > Node 0x0e [Audio Selector] wcaps 0x300100: Mono > Connection: 2 > 0x08* 0x11 > Node 0x0f [Audio Selector] wcaps 0x30010d: Stereo Amp-Out > Amp-Out caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 > Amp-Out vals: [0x00 0x00] > Connection: 8 > 0x1f 0x20 0x1d 0x1d 0x27* 0x28 0x29 0x2a > Node 0x10 [Audio Selector] wcaps 0x300101: Stereo > Connection: 3 > 0x20 0x1c* 0x1f > Node 0x11 [Audio Selector] wcaps 0x300941: Stereo R/L > Connection: 2 > 0x0f* 0x2b > Processing caps: benign=1, ncoeff=0 > Node 0x12 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out > Amp-Out caps: ofs=0x00, nsteps=0x0f, stepsize=0x05, mute=1 > Amp-Out vals: [0x80 0x80] > Connection: 8 > 0x11* 0x22 0x00 0x21 0x10 0x07 0x08 0x23 > Node 0x13 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out > Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1 > Amp-Out vals: [0x80 0x80] > Connection: 1 > 0x11 > Node 0x14 [Audio Selector] wcaps 0x30010c: Mono Amp-Out > Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1 > Amp-Out vals: [0x80] > Connection: 1 > 0x23 > Node 0x15 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out > Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1 > Amp-Out vals: [0x19 0x19] > Connection: 1 > 0x22 > Node 0x16 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out > Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1 > Amp-Out vals: [0x80 0x80] > Connection: 1 > 0x21 > Node 0x17 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out > Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1 > Amp-Out vals: [0x80 0x80] > Connection: 1 > 0x10 > Node 0x18 [Audio Selector] wcaps 0x30010c: Mono Amp-Out > Amp-Out caps: ofs=0x0f, nsteps=0x0f, stepsize=0x0b, mute=1 > Amp-Out vals: [0x8f] > Connection: 2 > 0x19* 0x24 > Node 0x19 [Beep Generator Widget] wcaps 0x700000: Mono > Node 0x1a [Pin Complex] wcaps 0x400185: Stereo Amp-Out > Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=1 > Amp-Out vals: [0x10 0x10] > Pincap 0x081f: OUT HP Detect Trigger ImpSense > Pin Default 0x02214021: [Jack] HP Out at Ext Front > Conn = 1/8, Color = Green > DefAssociation = 0x2, Sequence = 0x1 > Pin-ctls: 0xc0: OUT HP > Unsolicited: tag=00, enabled=0 > Connection: 1 > 0x0a > Node 0x1b [Pin Complex] wcaps 0x400185: Stereo Amp-Out > Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=1 > Amp-Out vals: [0x13 0x13] > Pincap 0x081001f: OUT HP EAPD Detect Trigger ImpSense > EAPD 0x2: EAPD > Pin Default 0x01014011: [Jack] Line Out at Ext Rear > Conn = 1/8, Color = Green > DefAssociation = 0x1, Sequence = 0x1 > Pin-ctls: 0x40: OUT > Unsolicited: tag=00, enabled=0 > Connection: 1 > 0x0b > Node 0x1c [Pin Complex] wcaps 0x400185: Stereo Amp-Out > Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=1 > Amp-Out vals: [0x80 0x80] > Pincap 0x0837: IN OUT Detect Trigger ImpSense > Pin Default 0x01013012: [Jack] Line Out at Ext Rear > Conn = 1/8, Color = Blue > DefAssociation = 0x1, Sequence = 0x2 > Pin-ctls: 0x20: IN > Unsolicited: tag=00, enabled=0 > Connection: 1 > 0x0c > Node 0x1d [Pin Complex] wcaps 0x400985: Stereo Amp-Out R/L > Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=1 > Amp-Out vals: [0x80 0x80] > Pincap 0x081737: IN OUT Detect Trigger ImpSense > Vref caps: HIZ 50 GRD 80 > Pin Default 0x01019015: [Jack] Line Out at Ext Rear > Conn = 1/8, Color = Pink > DefAssociation = 0x1, Sequence = 0x5 > Pin-ctls: 0x24: IN VREF_80 > Unsolicited: tag=00, enabled=0 > Connection: 1 > 0x0d > Node 0x1e [Pin Complex] wcaps 0x400104: Mono Amp-Out > Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=1 > Amp-Out vals: [0x80] > Pincap 0x0810: OUT > Pin Default 0x501700f0: [N/A] Speaker at Int N/A > Conn = Analog, Color = Unknown > DefAssociation = 0xf, Sequence = 0x0 > Pin-ctls: 0x40: OUT > Connection: 1 > 0x0e > Node 0x1f [Pin Complex] wcaps 0x400081: Stereo > Pincap 0x081727: IN Detect Trigger ImpSense > Vref caps: HIZ 50 GRD 80 > Pin Default 0x02a190f0: [Jack] Mic at Ext Front > Conn = 1/8, Color = Pink > DefAssociation = 0xf, Sequence = 0x0 > Pin-ctls: 0x24: IN VREF_80 > Unsolicited: tag=00, enabled=0 > Node 0x20 [Pin Complex] wcaps 0x400081: Stereo > Pincap 0x081727: IN Detect Trigger ImpSense > Vref caps: HIZ 50 GRD 80 > Pin Default 0x018130f0: [Jack] Line In at Ext Rear > Conn = 1/8, Color = Blue > DefAssociation = 0xf, Sequence = 0x0 > Pin-ctls: 0x20: IN VREF_HIZ > Unsolicited: tag=00, enabled=0 > Node 0x21 [Pin Complex] wcaps 0x400081: Stereo > Pincap 0x0827: IN Detect Trigger ImpSense > Pin Default 0x509700f0: [N/A] Aux at Int N/A > Conn = Analog, Color = Unknown > DefAssociation = 0xf, Sequence = 0x0 > Pin-ctls: 0x20: IN > Unsolicited: tag=00, enabled=0 > Node 0x22 [Pin Complex] wcaps 0x400001: Stereo > Pincap 0x0820: IN > Pin Default 0x993310f0: [Fixed] CD at Int ATAPI > Conn = ATAPI, Color = Black > DefAssociation = 0xf, Sequence = 0x0 > Pin-ctls: 0x20: IN > Node 0x23 [Pin Complex] wcaps 0x400000: Mono > Pincap 0x0820: IN > Pin Default 0x50b700f0: [N/A] Telephony at Int N/A > Conn = Analog, Color = Unknown > DefAssociation = 0xf, Sequence = 0x0 > Pin-ctls: 0x20: IN > Node 0x24 [Pin Complex] wcaps 0x400000: Mono > Pincap 0x0820: IN > Pin Default 0x50f700f0: [N/A] Other at Int N/A > Conn = Analog, Color = Unknown > DefAssociation = 0xf, Sequence = 0x0 > Pin-ctls: 0x20: IN > Node 0x25 [Pin Complex] wcaps 0x400301: Stereo Digital > Pincap 0x0810: OUT > Pin Default 0x0145f0f0: [Jack] SPDIF Out at Ext Rear > Conn = Optical, Color = Other > DefAssociation = 0xf, Sequence = 0x0 > Pin-ctls: 0x40: OUT > Connection: 1 > 0x02 > Node 0x26 [Power Widget] wcaps 0x500500: Mono > Power: setting=D0, actual=D0 > Connection: 8 > 0x07* 0x08 0x13 0x14 0x15 0x16 0x17 0x18 > Node 0x27 [Audio Mixer] wcaps 0x200101: Stereo > Connection: 2 > 0x1f 0x1d > Node 0x28 [Audio Mixer] wcaps 0x200101: Stereo > Connection: 2 > 0x1f 0x20 > Node 0x29 [Audio Mixer] wcaps 0x200101: Stereo > Connection: 2 > 0x1d 0x20 > Node 0x2a [Audio Mixer] wcaps 0x200101: Stereo > Connection: 3 > 0x1f 0x1d 0x20 > Node 0x2b [Audio Mixer] wcaps 0x200100: Mono > Connection: 1 > 0x0f > > Summary card and chipset information is in: > /proc/asound/cards: > 0 [Intel ]: HDA-Intel - HDA Intel > HDA Intel at 0xdd7f8000 irq 17 > > /proc/asound/pcm: > 00-01: AD198x Digital : AD198x Digital : playback 1 > 00-00: AD198x Analog : AD198x Analog : playback 1 : capture 1 > > A copy of /proc/asound had been copied to Modem/ALSAroot.tgz > PCI slot 00:1b.0 has a High Definition Audio Card > USB modem not detected by lsusb > > For candidate card, firmware information and bootup diagnostics are: > > PCI slot PCI ID SubsystemID Name > ---------- --------- --------- -------------- > 01:01.0 8086:1040 8086:1000 Communication controller: Intel > Corporation 536EP Data Fax Modem > > Modem interrupt assignment and sharing: > --- Bootup diagnostics for card in PCI slot 01:01.0 ---- > For candidate card, firmware information and bootup diagnostics are: > > PCI slot PCI ID SubsystemID Name > ---------- --------- --------- -------------- > 00:1b.0 8086:27d8 1043:817f Audio device: Intel Corporation 82801G > > Modem interrupt assignment and sharing: > 17: 2060 0 IO-APIC-fasteoi uhci_hcd:usb4, HDA Intel > --- Bootup diagnostics for card in PCI slot 00:1b.0 ---- > [ 38.652344] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 19 (level, > low) -> IRQ 17 > [ 38.652371] PCI: Setting latency timer of device 0000:00:1b.0 to 64 > > === Finished modem firmware and bootup diagnostics section. === > === Next deducing cogent software === > > The High Defintion Audio card with PCI ID 8086:27d8 may host a soft > modem chip. > The NotDetermined is not supported by this kernel. > > There is candidate modem software. > > For candidate modem in PCI bus: 00:1b.0 > Class 0403: 8086:27d8 Audio device: Intel Corporation 82801G > Primary PCI_id 8086:27d8 > Subsystem PCI_id 1043:817f > Softmodem codec or chipset from diagnostics: > from Archives: > > > Lacking a dsp (digital signal processing) chip, the modem is a software > intensive or "softmodem" type. Its primary controller manages the traffic > with the CPU. But the software needed is specified in the Subsystem. > ----------------------------------------- > Support type needed or chipset: > > Support can likely be achieved through two mutually exclusive alternatives: > 1) The hsfmodem software for Conexant chipset modems: Read Conexant.txt > The following ALSA alternative CANNOT work with Conexant modems. > > 2) An ALSA modem driver plus slmodemd. Read Smartlink.txt for details, and > to test get the package SLMODEMD.gcc4.2.tar.gz from: > http://linmodems.technion.ac.il/packages/smartlink/ > > > Writing Intel.txt > > For owners of a Dell PCs with Conexant HSF modems, a driver source > package with full speed enabled is available, but requires driver > compiling. Read Conexant.txt > > Read Conexant.txt > > Writing Conexant.txt > > Writing Smartlink.txt > ============ end Smartlink section ===================== > > For candidate modem in PCI bus: 01:01.0 > Class 0780: 8086:1040 Communication controller: Intel Corporation > 536EP Data Fax Modem > Primary PCI_id 8086:1040 > Support type needed or chipset: INTEL536EP > > > > Completed candidate modem analyses. > > The base of the UDEV device file system is: /dev/.udev > > Versions adequately match for the compiler installed: 4.2.3 > and the compiler used in kernel assembly: 4.2.3 > > > > Minimal compiling resources appear complete: > make utility - /usr/bin/make > Compiler version 4.2 > linuc_headers base folder /lib/modules/2.6.24-16-generic/build > > However some compilations and executable functions may need additional > files, > in the FileNames.h (so called kernel "h"eaders) collection installed > in /usr/include/ . > For martian_modem, additional required packages are libc6-dev (and > for Debian/Ubuntu, linux-libc-dev). The also required headers of > package libc6 are commonly installed by default. > > > > If a driver compilation fails, with message including some lack of > some FileName.h (stdio.h for example), then > Some additional kernel-header files need installation to /usr/include. > The minimal additional packages are libc6-dev > and any of its dependents, under Ubuntu linux-libc-dev > > If an alternate ethernet connection is available, > $ apt-get update > $ apt-get -s install linux-kernel-devel > will install needed pacakage > For Debian/Ubuntu related distributions, run the following command to > display the needed package list: > > Otherwise packages have to be found through http://packages.ubuntu.com > Once downloaded and transferred into a Linux partition, > they can be installed alltogether with: > $ sudo dpkg -i *.deb > > > Checking pppd properties: > -rwsr-xr-- 1 root dip 269256 2007-10-04 23:27 /usr/sbin/pppd > > In case of an "error 17" "serial loopback" problem, see: > http://phep2.technion.ac.il/linmodems/archive-sixth/msg02637.html > > To enable dialout without Root permission do: > $ su - root (not for Ubuntu) > sudo chmod a+x /usr/sbin/pppd > or under Ubuntu related Linuxes > sudo chmod a+x /usr/sbin/pppd > > Checking settings of: /etc/ppp/options > asyncmap 0 > noauth > crtscts > lock > hide-password > modem > proxyarp > lcp-echo-interval 30 > lcp-echo-failure 4 > noipx > > In case of a message like: > Warning: Could not modify /etc/ppp/pap-secrets: Permission denied > see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html > > Read Modem/YourSystem.txt concerning other COMM channels: eth0 > Which can interfere with Browser naviagation. > > Don't worry about the following, it is for the experts > should trouble shooting be necessary. > ========================================================== > > Checking for modem support lines: > -------------------------------------- > /device/modem symbolic link: > slmodemd created symbolic link /dev/ttySL0: > Within /etc/udev/ files: > > Within /etc/modprobe.conf files: > /etc/modprobe.d/blacklist-modem:# Uncomment these entries in order to > blacklist unwanted modem drivers > /etc/modprobe.d/blacklist-modem:# blacklist snd-atiixp-modem > /etc/modprobe.d/blacklist-modem:# blacklist snd-via82xx-modem > /etc/modprobe.d/alsa-base:options snd-atiixp-modem index=-2 > /etc/modprobe.d/alsa-base:options snd-via82xx-modem index=-2 > Within any ancient /etc/devfs files: > > Within ancient kernel 2.4.n /etc/module.conf files: > > --------- end modem support lines -------- >