Bryon
Your probem under Debian Etch 2.6.18-4-686
with
0 [I82801DBICH4 ]: ICH4 - Intel 82801DB-ICH4
Intel 82801DB-ICH4 with AD1981B at 0xc0000c00, irq 11
1 [Modem ]: ICH-MODEM - Intel 82801DB-ICH4 Modem
Intel 82801DB-ICH4 Modem at 0x2400, irq 11
with driver snd-intel8x0m with its dependent drivers:
snd_intel8x0m 15980 2
snd_ac97_codec 83104 2 snd_intel8x0,snd_intel8x0m
snd_pcm 68676 6
snd_intel8x0,snd_intel8x0m,snd_ac97_codec,snd_pcm_oss
snd 47012 9
snd_intel8x0,snd_intel8x0m,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
snd_page_alloc 9640 3 snd_intel8x0,snd_intel8x0m,snd_pcm
and SIL27 Codec
---------
is not transparent, Many on this list are using similar modems into
the 2.4.2n kernels. Read the sections of /etc/ppp/options about
adjusting LCP settings.
and similarly section in
$ man pppd
Also the PostInstall Howto at http://linmodems.technion.ac.il
If you have an alternate ethernet CONNECT, do a
# apt-get update
# apt-get upgrade
to bring in any Etch updates.
MarvS
On Mon, Jun 9, 2008 at 12:27 AM, Byron Edgar <relmoyd@xxxxxxxxx> wrote:
> Marvin
>
> pppd reports:
>
> No response to 4 echo-requests
> Serial link appears to be disconnected.
> Connect time 3.0 minutes.
>
> Again, this is not a problem under kernel 2.4.27 using slamr. I'm not sure
> what to do next.
>
> Byron
>
> Marvin Stodolsky wrote:
>>
>> Byron,
>>
>> Read the wvdial.txt file about configuation changes to test.
>>
>> MarvS
>>
>> On Mon, Jun 2, 2008 at 11:17 PM, Byron Edgar <relmoyd@xxxxxxxxx> wrote:
>>
>>>
>>> Marvin
>>>
>>> Building slmodemd works, however, my connection does not stay up long
>>> enough
>>> to be useful. I'm using ppp.
>>>
>>> By the way, gcc (version 4.1.2 20061115) gives several:
>>> warning: pointer targets in passing argument differ in signedness
>>>
>>> Marvin Stodolsky wrote:
>>>
>>>>
>>>> Someone send me an email concerning the topic of the Ubject line,
>>>> which I no longer can find.
>>>> Just resend if necessary.
>>>>
>>>> But the solution is to compile your own ALSA competent slmodemd for
>>>> support of the SIL27 codec modem.
>>>> 1) install the package libasound2-dev , required for the ALSA competent
>>>> install
>>>> 2) from http://linmodems.technion.ac.il/packages/smartlink/
>>>> download the slmodem-2.9.11-20080417.tar.gz
>>>> unpack and move into the modem/ subfolder. Then do:
>>>> # make clean
>>>> # make SUPPORT_ALSA=1
>>>> Then replace your current /usr/sbin/slmodemd
>>>>
>>>> MarvS
>>>>
>>>>
>>>>
>>>
>>>
>>
>>
>
>
