Support for HDA based modem chip 11c11040 under Red Flag kernel 2.6.21.0-22

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Folder http://linmodems.technion.ac.il/packages/ltmodem/11c11040/
Contains files originating at Red FLag Linux:  http://www.redflag-linux.com/
It is Fedora based distribution.  The  14 MB
   kernel-2.6.21.0-22.i686.rpm
installs a Kernel + modules set, which could be used for alternative
booting on any RPM using distro.

|
|-- boot
|   |-- System.map-2.6.21.0-22
|   |-- config-2.6.21.0-22
|   `-- vmlinuz-2.6.21.0-22
|
`-- lib
    `-- modules
                   `--2.6.21.0-22  etcetera
This package should be installed FIRST, then a reboot and sanity tests
done under the new kernel 2.6.21.0-22

Agere-driver-1.0-10dd.i386.rpm -  contains a compiled agrmodem +
agrserial drivers with setup scripts,
which installs per figure below, with:
# rpm -Uvh agere-driver-1.0-10dd.i386.rpm --force --nodeps
These drivers will ONLY work with this particular boot kernel!!!

There is a report that these two installations do suffice to get modem support.
Your success/failure reports would be appreciated

During the weekend I will convert    kernel-2.6.21.0-22.i686.rpm to a
  kernel-2.6.21.0-22.i686.deb
so similar trials can be done on Debian/Ubuntu type systems.

If any of you are fluent enough in Chinese to converse with Red Flag
staff, please contact me.

MarvS
=========

/
|-- etc
|   `-- init.d
|       `-- agr_softmodem
|-- lib
|   `-- modules
|       `-- 2.6.21.0-22
|           `-- kernel
|               `-- drivers
|                   `-- char
|                       |-- agrmodem.ko
|                       `-- agrserial.ko
`-- usr
    `-- lib
        `-- AgereSoftModem
            |-- AgereMdmDaemon
            `-- LICENSE

[Index of Archives]     [Linux Media Development]     [Asterisk]     [DCCP]     [Netdev]     [X.org]     [Xfree86]     [Fedora Women]     [Linux USB]

  Powered by Linux