Hi there friends Firstly i would like to rethank you all for your help in getting my build in hsf conexant modem to work. I really appreciated it very much One of my friend recently gave me his used aztech um3100 56k usb modem and i need you peoples help here again. I then did a couple of test and one of which is to fax out using efax and the other is trying to installed the modem thru vmware but vmware returned the error code "Cannot detect modem" PLS HELP ME OK? 1ST OUTPUT ------- rick@rick-laptop:~$ lsusb Bus 003 Device 001: ID 0000:0000 Bus 002 Device 003: ID 0a81:0101 Chesen Electronics Corp. Keyboard Bus 002 Device 001: ID 0000:0000 Bus 001 Device 005: ID 0572:1328 Conexant Systems (Rockwell), Inc. Bus 001 Device 004: ID 15d9:0a33 Bus 001 Device 001: ID 0000:0000 rick@rick-laptop:~$ 2ND OUTPUT -------- rick@rick-laptop:~$ /sbin/lsmod | grep hsf hsfhda 110944 1 hsfserial 24612 1 hsfhda hsfengine 1295244 2 hsfhda,hsfserial hsfosspec 105704 6 hsfhda,hsfserial,hsfengine usbcore 138632 7 cdc_acm,hsfosspec,xpad,usbhid,ehci_hcd,ohci_hcd rick@rick-laptop:~$ I M NOT SURE WHETHER THIS IS HELPFUL OR NOT BUT I WILL INCLUDE IT ANYWAY ------------------------------------------------ rick@rick-laptop:~$ sudo wvdialconf /etc/wvdial.conf [sudo] password for rick: Editing `/etc/wvdial.conf'. Scanning your serial ports for a modem. Modem Port Scan<*1>: Scanning ttySHSF0 first, /dev/modem is a link to it. ttySHSF0<*1>: ATQ0 V1 E1 -- OK ttySHSF0<*1>: ATQ0 V1 E1 Z -- OK ttySHSF0<*1>: ATQ0 V1 E1 S0=0 -- OK ttySHSF0<*1>: ATQ0 V1 E1 S0=0 &C1 -- OK ttySHSF0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK ttySHSF0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK ttySHSF0<*1>: Modem Identifier: ATI -- 56000 ttySHSF0<*1>: Speed 4800: AT -- OK ttySHSF0<*1>: Speed 9600: AT -- OK ttySHSF0<*1>: Speed 19200: AT -- OK ttySHSF0<*1>: Speed 38400: AT -- OK ttySHSF0<*1>: Speed 57600: AT -- OK ttySHSF0<*1>: Speed 115200: AT -- OK ttySHSF0<*1>: Speed 230400: AT -- OK ttySHSF0<*1>: Speed 460800: AT -- OK ttySHSF0<*1>: Max speed is 460800; that should be safe. ttySHSF0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK Modem Port Scan<*1>: S1 S2 S3 SHSF1 SHSF2 SHSF3 SHSF4 SHSF5 Modem Port Scan<*1>: SHSF6 SHSF7 Found a modem on /dev/ttySHSF0, using link /dev/modem in config. Modem configuration written to /etc/wvdial.conf. ttySHSF0<Info>: Speed 460800; init "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0" rick@rick-laptop:~$ rick@rick-laptop:~$ sudo wvdial WvDial<*1>: WvDial: Internet dialer version 1.56 WvDial<*1>: Initializing modem. WvDial<*1>: Sending: ATZ WvDial Modem<*1>: ATZ WvDial Modem<*1>: OK WvDial<*1>: Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 WvDial Modem<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 WvDial Modem<*1>: OK WvDial<*1>: Modem initialized. WvDial<Err>: Configuration does not specify a valid phone number. WvDial<Err>: Configuration does not specify a valid login name. WvDial<Err>: Configuration does not specify a valid password. rick@rick-laptop:~$ Should you required further details, pls let me ok. Thanking you peoples in advance. BYE
