Re: mohammad, syria kernel 2.6.22-14-generic

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Mohammad,

Please read Jacques' post-install

http://linmodems.technion.ac.il/post-install.html

Then when ready, try to do the following:

/*** copied from wvdial.txt ****/
## If CONNECT is achieved but browsing fails, try activating the following line
# Auto DNS = yes
##    To make a logfile wvdial.out
# wvdial 2>&1 | tee wvdial.out
# #  For some Internet providers, the following line is necessary
# Stupid Mode = yes

# sudo wvdial 2>&1 | tee wvdial.out

send us wvdial.out to discuss@xxxxxxxxxxxxxx  This way we can try and
pinpoint where the problem is.

HTH,

Antonio




On 4/18/08, moonlight <moonlighthd@xxxxxxxxx> wrote:
> i'm very sorry but i still have the same problem
>
>
> --- Antonio Olivares <olivares14031@xxxxxxxxx> wrote:
>
> > Mohammad,
> >
> > Please use wvdial instead of gppp till you know that
> > the connection works.
> >
> > carefully read wvdial.txt in /Modem directory of
> > output of scanModem
> >
> > if slmodemd is already running open up another
> > terminal
> >
> > $ sudo wvdialconf /etc/wvdial.conf
> >
> > will overwrite/write /etc/wvdial.conf
> >
> > you should see something like
> > [Dialer Defaults]
> > Modem = /dev/ttySL0
> > Baud = 460800
> > Init1 = ATZ
> > Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
> > ISDN = 0
> > Modem Type = Analog Modem
> > ; Phone = <Target Phone Number>
> > ; Username = <Your Login Name>
> > ; Password = <Your Password>
> >
> >
> > $ sudo gedit /etc/wvdial.conf
> > add your own username/pasword and phone number.
> > add a line
> > Carrier Check = no
> >
> > make it look like
> >
> > [Dialer Defaults]
> > Modem = /dev/ttySL0
> > Baud = 115200
> > Init1 = ATZ
> > Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
> > ISDN = 0
> > Modem Type = Analog Modem
> > Phone = 3334445555
> > Username = Your_Login_Name
> > Password = Your_Password
> > Carrier Check = no
> >
> > I personally change Init2 to the following
> > Init2 = ATQ0 V1 E1 S0=0 X3 &C1 &D2 +MS=90
> >
> > Also you got the message:
> >
> > <quote>
> > WvDial<Err>: Warning: Could not modify
> > /etc/ppp/pap-secrets: Permission denied
> > WvDial<Err>: --> PAP (Password Authentication
> > Protocol) may be flaky.
> > WvDial<Err>: Warning: Could not modify
> > /etc/ppp/chap-secrets: Permission denied
> > WvDial<Err>: --> CHAP (Challenge Handshake) may be
> > flaky.
> > </quote>
> >
> >    Warning: Could not modify /etc/ppp/pap-secrets:
> > Permission denied
> >
> > Please
> >  see
> >
> http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html
> >
> > try to dialout with
> > $ sudo wvdial
> >
> > Try to connect first and then report back.
> >
> > Regards,
> >
> > Antonio
> >
> >
> >
> >
> > On Thu, Apr 17, 2008 at 10:40 AM, moonlight
> > <moonlighthd@xxxxxxxxx> wrote:
> > > after i installed the
> > slamr-2.6.22-14-generic.tar.gz
> > >  and i tried to dial using gppp i got the
> > following
> > >  log:
> > >
> > >  /home/mohammad/.wvdial.conf<Warn>: Ignoring
> > malformed
> > >  input line: ";Do NOT edit this file by hand!"
> > >  WvDial<*1>: WvDial: Internet dialer version 1.56
> > >  WvModem<*1>: Cannot 1tion for serial port.
> > >  WvDial<*1>: Initializing modem.
> > >  WvDial<*1>: Sending: ATZ
> > >  WvDial Modem<*1>: ATZ
> > >  WvDial Modem<*1>: OK
> > >  WvDial<*1>: Sending: ATQ0 V1 E1 S0=0 &C1 &D2
> > +FCLASS=0
> > >  WvDial Modem<*1>: ATQ0 V1 E1 S0=0 &C1 &D2
> > +FCLASS=0
> > >  WvDial Modem<*1>: OK
> > >  WvDial<*1>: Modem initialized.
> > >  WvDial<*1>: Sending: ATM1L1DT198198
> > >  WvDial<*1>: Waiting for carrier.
> > >  WvDial Modem<*1>: ATM1L1DT198198
> > >  WvDial Modem<*1>: CONNECT 52000
> > >  WvDial<*1>: Carrier detected.  Waiting for
> > prompt.
> > >  WvDial Modem<*1>: ~[7f]}#@!}!'} }9}"}&} }*} }
> > >  }#}%B#}%}%}&LjH~}'}"}(}"gx~
> > >  WvDial<*1>: PPP negotiation detected.
> > >  WvDial<Notice>: Starting pppd at Thu Apr 17
> > 15:07:52
> > >  2008
> > >  WvDial<Err>: Warning: Could not modify
> > >
> > > /etc/ppp/pap-secrets: Permission denied
> > >  WvDial<Err>: --> PAP (Password Authentication
> > >  Protocol) may be flaky.
> > >  WvDial<Err>: Warning: Could not modify
> > >  /etc/ppp/chap-secrets: Permission denied
> > >  WvDial<Err>: --> CHAP (Challenge Handshake) may
> > be
> > >  flaky.
> > >  WvDial<Notice>: Pid of pppd: 5880
> > >  WvDial<*1>: Using interface ppp0
> > >  WvDial<*1>: Disconnecting at Thu Apr 17 15:07:56
> > 2008
> > >  WvDial<*1>: The PPP daemon has died:
> > Authentication
> > >  error.
> > >  WvDial<*1>: We failed to authenticate ourselves
> > to the
> > >  peer.
> > >  WvDial<*1>: Maybe bad account or password? (exit
> > code
> > >  = 19)
> > >  WvDial<*1>: man pppd explains pppd error codes in
> > more
> > >  detail.
> > >  WvDial<Notice>: I guess that's it for now,
> > exiting
> > >  WvDial<Notice>: The PPP daemon has died. (exit
> > code =
> > >  19)
> > >
> > >
> > >  Note: forwarded message attached.
> > >
> > >
> > >
> > >
> > >
> > >
> >
> ____________________________________________________________________________________
> > >  Be a better friend, newshound, and
> > >  know-it-all with Yahoo! Mobile.  Try it now.
> >
> http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ
> > >
> > > ---------- Forwarded message ----------
> > > From: moonlight <moonlighthd@xxxxxxxxx>
> > > To: Discuss@xxxxxxxxxxxxx
> > > Date: Wed, 16 Apr 2008 09:01:49 -0700 (PDT)
> > > Subject: mohammad, syria kernel 2.6.22-14-generic
> > > Only plain text email is forwarded by the
> > >  Discuss@xxxxxxxxxxxxx List Server,
> > >   as HTML can contain viruses. Use as the email
> > >  Subject Line:
> > >             YourName, YourCountry  kernel
> > >  2.6.22-14-generic
> > >   With this Subject Line cogent experts will be
> > >  alerted, and useful case names left in the
> > Archive.
> > >   YourCountry will enable Country specific
> > guidance.
> > >  Your contry's local Linux experts
> > >   can be found through:
> > >  http://www.linux.org/groups/index.html.
> > >   They will know your Country's modem code, which
> > may
> > >  be essential for dialup service.
> > >   Responses from Discuss@xxxxxxxxxxxxx are
> > sometimes
> > >  blocked by an Internet Provider mail filters.
> > >   So in a day, also check the Archived responses
> > at
> > >  http://www.linmodems.org
> > >   --------------------------  System information
> > >  ----------------------------
> > >   CPU=i686,
> > >   Linux version 2.6.22-14-generic (buildd@palmer)
> > (gcc
> > >  version 4.1.3 20070929 (prerelease) (Ubuntu
> > >  4.1.2-16ubuntu2)) #1 SMP Sun Oct 14 23:05:12 GMT
> > 2007
> > >   scanModem update of:  2008_04_06
> > >   The modem symbolic link is /dev/modem -> ttySL0
> > >   The slmodemd set symbolic link is /dev/ttySL0 ->
> >
> === message truncated ===
>
>
>
>      ____________________________________________________________________________________
> Be a better friend, newshound, and
> know-it-all with Yahoo! Mobile.  Try it now.  http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ
>

[Index of Archives]     [Linux Media Development]     [Asterisk]     [DCCP]     [Netdev]     [X.org]     [Xfree86]     [Fedora Women]     [Linux USB]

  Powered by Linux