Hi, again!
Here is my problem. I finally found a way to install Kubuntu x86 on
my AMD 64 HP Pavilion PC. Before I tried Kubuntu x86-64 and had
problems with installing drivers for HSF Conexant.
Now I could install drivers for smartlink modem and have some
success. I'm connecting fine to Internet through KPPP with good speed
but Konkueror doesn't work at all. Neither other programs can work
in Internet. The connection is dead. What's the problem?
Thanks ahead!
artur
Only plain text email is forwarded by the Discuss@xxxxxxxxxxxxx List Server,
as HTML can contain viruses. Use as the email Subject Line:
YourName, YourCountry kernel 2.6.22-14-generic
With this Subject Line cogent experts will be alerted, and useful case names left in the Archive.
YourCountry will enable Country specific guidance. Your contry's local Linux experts
can be found through: http://www.linux.org/groups/index.html.
They will know your Country's modem code, which may be essential for dialup service.
Responses from Discuss@xxxxxxxxxxxxx are sometimes blocked by an Internet Provider mail filters.
So in a day, also check the Archived responses at http://www.linmodems.org
-------------------------- System information ----------------------------
CPU=i686,
Linux version 2.6.22-14-generic (buildd@palmer) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Sun Oct 14 23:05:12 GMT 2007
scanModem update of: 2008_03_25
The modem symbolic link is /dev/modem -> ttySL0
The slmodemd set symbolic link is /dev/ttySL0 -> /dev/pts/2
There are no blacklisted modem drivers in /etc/modprobe* files
USB modem not detected by lsusb
For candidate card in slot 01:0a.0, firmware information and bootup diagnostics are:
PCI slot PCI ID SubsystemID Name
---------- --------- --------- --------------
01:0a.0 1057:3052 1057:3020 Modem: Motorola SM56 Data Fax Modem
Modem interrupt assignment and sharing:
16: 456 223321 IO-APIC-fasteoi SL1900
--- Bootup diagnostics for card in PCI slot 01:0a.0 ----
[ 1.560000] ACPI: PCI Interrupt 0000:01:0a.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 16
[ 1.560000] 0000:01:0a.0: ttyS0 at I/O 0xcc08 (irq = 16) is a 16450
[ 1.560000] 0000:01:0a.0: ttyS1 at I/O 0xcc10 (irq = 16) is a 8250
[ 1.560000] 0000:01:0a.0: ttyS2 at I/O 0xcc18 (irq = 16) is a 16450
[ 1.564000] 0000:01:0a.0: ttyS3 at I/O 0xcc20 (irq = 16) is a 8250
[ 1.564000] Couldn't register serial port 0000:01:0a.0: -28
[ 644.116000] ACPI: PCI interrupt for device 0000:01:0a.0 disabled
[ 644.252000] ACPI: PCI Interrupt 0000:01:0a.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 16
The PCI slot 01:0a.0 of the modem card may be disabled early in
a bootup process, but then enabled later. If modem drivers load
but the modem is not responsive, read Bootup.txt about possible fixes.
Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx
if help is needed.
For candidate card in slot 00:05.0, firmware information and bootup diagnostics are:
PCI slot PCI ID SubsystemID Name
---------- --------- --------- --------------
00:05.0 10de:03f0 103c:2a66 Audio device: nVidia Corporation MCP61 High Definition Audio
Modem interrupt assignment and sharing:
19: 254 51754 IO-APIC-fasteoi ohci_hcd:usb1, HDA Intel
--- Bootup diagnostics for card in PCI slot 00:05.0 ----
[ 13.808000] ACPI: PCI Interrupt 0000:00:05.0[B] -> Link [AAZA] -> GSI 22 (level, low) -> IRQ 19
[ 13.808000] PCI: Setting latency timer of device 0000:00:05.0 to 64
=== Finished firmware and bootup diagnostics, next deducing cogent software. ===
Predictive diagnostics for card in bus 01:0a.0:
Modem chipset detected on
CLASS="Class 0703: 1057:3052"
NAME="Modem: Motorola SM56 Data Fax Modem "
PCIDEV=1057:3052
SUBSYS=1057:3020
IRQ=16
IDENT=slamr
For candidate modem in: 01:0a.0
Class 0703: 1057:3052 Modem: Motorola SM56 Data Fax Modem
Primary PCI_id 1057:3052
Support type needed or chipset: slamr
----------------end Softmodem section --------------
1057:3052 has a Motorola chipset, poorly supported by Motorola itself
However Zello discovered that drivers written to support Smartlink modems do support the 1057:3052 chipset!!
It sufficed to add 1057:3052 to the list of modem cards recognized by the Smartlink slamr driver.
There is a ungrab-winmodem driver used in conjunction with slamr, which must have 1057:3052
similarly added. See messages from Zello:
http://linmodems.technion.ac.il/bigarch/archive-seventh/msg00846.html
http://linmodems.technion.ac.il/bigarch/archive-seventh/msg00848.html
and Alvaro Aguirre about the ungrab-winmodem fix:
http://linmodems.technion.ac.il/bigarch/archive-seventh/msg00990.html
For general guidance on ungrab-winmodem + slamr usage, read the Smartlink.txt
The modem is supported by the Smartlink slamr driver
plus the slmodemd helper utility. Read the
Smartlink.txt and Modem/YourSystem.txt for follow through guidance.
Download slamr-2.6.22-14-generic.tar.gz from http://linmodems.technion.il/packages/smartlink/Ubuntu/
under Linux, open a terminal and unpack with:
$ tar zxvf slamr*.tar.gz
Move into the unpacked folder
$ cd slamr-2.6.22-14-generic
Look around
$ ls
Run the
$ sudo ./setup
Afterwards do:
$ slmodemd --help
$ slmodemd --countrylist &> Clist.txt
If not in the USA, look for your COUNTRY_NAME therein.
Do and edit with:
$ sudo gedit /etc/default/sl-modem-daemon
and therein replace the USA in the line:
SLMODEMD_COUNTRY=USA
This will provide for the correct Country setting in the automated:
slmodemd -c COUNTRY /dev/slamr0
Read the Smartlink.txt and YourSystem.txt
Writing Smartlink.txt
============ end Smartlink section =====================
Predictive diagnostics for card in bus 00:05.0:
Modem chipset not detected on
CLASS="Class 0403: 10de:03f0"
NAME="Audio device: nVidia Corporation MCP61 High Definition Audio "
PCIDEV=10de:03f0
SUBSYS=103c:2a66
IRQ=19
HDA=10de:03f0
SOFT=10de:03f0.HDA
High Definition Audio (HDA) cards MAY host a modem chip in their Subsystem,
and many are supported by the ALSA audio+modem driver snd-hda-intel
A modem was not detected on HDA card 10de:03f0.
If another modem card is present, then most likely 10de:03f0 does not host a modem.
If another modem card has not been detected, then possibilities are:
1) A Conexant modem chip is present on 10de:03f0, as Conexant chips
are frequently not detectable by ALSA diagnostics
2) The modem may be of the older non-PCI Controller Chipset (hardware) type.
Try detection with Root permission:
sudo wvdialconf /etc/wvdial.conf
For candidate modem in: 00:05.0
Class 0403: 10de:03f0 Audio device: nVidia Corporation MCP61 High Definition Audio
Primary PCI_id 10de:03f0
Subsystem PCI_id 103c:2a66
Softmodem codec or chipset from diagnostics:
from Archives:
Support type needed or chipset:
Support can likely be achieved through two mutually exclusive alternatives:
1) The hsfmodem software for Conexant chipset modems: Read Conexant.txt
The following ALSA alternative CANNOT work with Conexant modems.
2) An ALSA modem driver plus slmodemd. Read Smartlink.txt for details, and
to test get the package SLMODEMD.gcc4.1.tar.gz from:
http://linmodems.technion.ac.il/packages/smartlink/
----------------end Softmodem section --------------
Completed candidate modem analyses.
The base of the UDEV device file system is: /dev/.udev
Versions adequately match for the compiler installed: 4.1.3
and the compiler used in kernel assembly: 4.1.3
Minimal compiling resources appear complete:
make utility - /usr/bin/make
Compiler version 4.1
linuc_headers base folder /lib/modules/2.6.22-14-generic/build
However some compilations and executable functions may need additional files,
in the FileNames.h (so called kernel "h"eaders) collection installed in /usr/include/ .
For martian_modem, additional required packages are libc6-dev (and for Debian/Ubuntu, linux-libc-dev). The also required headers of package libc6 are commonly installed by default.
If a driver compilation fails, with message including some lack of some FileName.h (stdio.h for example), then
Some additional kernel-header files need installation to /usr/include. The minimal additional packages are libc6-dev
and any of its dependents, under Ubuntu linux-libc-dev
If an alternate ethernet connection is available,
$ apt-get update
$ apt-get -s install linux-kernel-devel
will install needed package
For Debian/Ubuntu related distributions, run the following command to display the needed package list:
Otherwise packages have to be found through http://packages.ubuntu.com
Once downloaded and transferred into a Linux partition,
they can be installed alltogether with:
$ sudo dpkg -i *.deb
Checking pppd properties:
-rwsr-xr-- 1 root dip 269256 2007-10-05 00:57 /usr/sbin/pppd
In case of an "error 17" "serial loopback" problem, see:
http://linmodems.technion.ac.il/linmodems/archive-sixth/msg02637.html
To enable dialout without Root permission do:
$ su - root (not for Ubuntu)
sudo chmod a+x /usr/sbin/pppd
or under Ubuntu related Linuxes
sudo chmod a+x /usr/sbin/pppd
Checking settings of: /etc/ppp/options
asyncmap 0
noauth
crtscts
lock
hide-password
modem
proxyarp
lcp-echo-interval 30
lcp-echo-failure 4
noipx
In case of a message like:
Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html
Read Modem/YourSystem.txt concerning other COMM channels: eth0 wlan0 wmaster0
Which can interfere with Browser naviagation.
Don't worry about the following, it is for the experts
should trouble shooting be necessary.
==========================================================
# start/stop the daemon when the USB modem is connected
KERNEL=="slusb[0-9]*", GROUP="dialout", RUN+="/etc/init.d/sl-modem-daemon"
Checking for modem support lines:
--------------------------------------
/device/modem symbolic link: lrwxrwxrwx 1 root root 6 2008-04-11 14:49 /dev/modem -> ttySL0
slmodemd created symbolic link /dev/ttySL0: lrwxrwxrwx 1 root root 10 2008-04-11 14:49 /dev/ttySL0 -> /dev/pts/2
Within /etc/udev/ files:
/etc/udev/rules.d/030_sl-modem-daemon.rules:# start/stop the daemon when the USB modem is connected
/etc/udev/rules.d/030_sl-modem-daemon.rules:KERNEL=="slusb[0-9]*", GROUP="dialout", RUN+="/etc/init.d/sl-modem-daemon"
/etc/udev/sl-modem-daemon.rules:# start/stop the daemon when the USB modem is connected
/etc/udev/sl-modem-daemon.rules:KERNEL=="slusb[0-9]*", GROUP="dialout", RUN+="/etc/init.d/sl-modem-daemon"
Within /etc/modprobe.conf files:
/etc/modprobe.d/alsa-base:options snd-atiixp-modem index=-2
/etc/modprobe.d/alsa-base:options snd-via82xx-modem index=-2
/etc/modprobe.d/sl-modem-daemon.modutils:install slamr modprobe --ignore-install ungrab-winmodem ; modprobe --ignore-install slamr; test -e /dev/slamr0 || (/bin/mknod -m 660 /dev/slamr0 c 242 0 2>/dev/null && chgrp dialout /dev/slamr0)
/etc/modprobe.d/blacklist-modem:# Uncomment these entries in order to blacklist unwanted modem drivers
/etc/modprobe.d/blacklist-modem:# blacklist snd-atiixp-modem
/etc/modprobe.d/blacklist-modem:# blacklist snd-via82xx-modem
Within any ancient /etc/devfs files:
Within ancient kernel 2.4.n /etc/module.conf files:
--------- end modem support lines --------
CPU0 CPU1
0: 145 10 IO-APIC-edge timer
1: 3 684 IO-APIC-edge i8042
8: 0 7 IO-APIC-edge rtc
9: 0 0 IO-APIC-fasteoi acpi
16: 456 223379 IO-APIC-fasteoi SL1900
17: 961 218173 IO-APIC-fasteoi ehci_hcd:usb2, eth0
18: 173 43076 IO-APIC-fasteoi sata_nv
19: 254 51752 IO-APIC-fasteoi ohci_hcd:usb1, HDA Intel
20: 0 3 IO-APIC-fasteoi ohci1394
NMI: 0 0
LOC: 151549 154186
ERR: 1
MIS: 0
[ 0.000000] Linux version 2.6.22-14-generic (buildd@palmer) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Sun Oct 14 23:05:12 GMT 2007 (Ubuntu 2.6.22-14.46-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
[ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 0000000077ef0000 (usable)
[ 0.000000] BIOS-e820: 0000000077ef0000 - 0000000077ef3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 0000000077ef3000 - 0000000077f00000 (ACPI data)
[ 0.000000] BIOS-e820: 0000000078000000 - 0000000080000000 (reserved)
[ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] 1022MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000f5360
[ 0.000000] Entering add_active_range(0, 0, 491248) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 491248
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 491248
[ 0.000000] On node 0 totalpages: 491248
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2045 pages used for memmap
[ 0.000000] HighMem zone: 259827 pages, LIFO batch:31
[ 0.000000] DMI present.
[ 0.000000] ACPI: RSDP signature @ 0xC00F7490 checksum 0
[ 0.000000] ACPI: RSDP 000F7490, 0024 (r2 HPQOEM)
[ 0.000000] ACPI: XSDT 77EF3100, 0054 (r1 HPQOEM SLIC-CPC 42302E31 AWRD 0)
[ 0.000000] ACPI: FACP 77EF94C0, 00F4 (r3 HPQOEM SLIC-CPC 42302E31 AWRD 0)
[ 0.000000] ACPI: DSDT 77EF32C0, 61AA (r1 HPQOEM SLIC-CPC 1000 MSFT 3000000)
[ 0.000000] ACPI: FACS 77EF0000, 0040
[ 0.000000] ACPI: SLIC 77EF96C0, 0176 (r1 HPQOEM SLIC-CPC 42302E31 AWRD 0)
[ 0.000000] ACPI: SSDT 77EF9880, 028A (r1 HPQOEM SLIC-CPC 1 LTP 1)
[ 0.000000] ACPI: HPET 77EF9B80, 0038 (r1 HPQOEM SLIC-CPC 42302E31 AWRD 98)
[ 0.000000] ACPI: MCFG 77EF9C00, 003C (r1 HPQOEM SLIC-CPC 42302E31 AWRD 0)
[ 0.000000] ACPI: APIC 77EF9600, 007C (r1 HPQOEM SLIC-CPC 42302E31 AWRD 0)
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 15:11 APIC version 16
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] Processor #1 15:11 APIC version 16
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ14 used by override.
[ 0.000000] ACPI: IRQ15 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfefff000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:70000000)
[ 0.000000] Built 1 zonelists. Total pages: 487411
[ 0.000000] Kernel command line: root=UUID=0e12d0fc-af5c-4a69-8875-8d9f11a88395 ro quiet splash
[ 0.000000] mapped APIC to ffffd000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffc000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Detected 2600.099 MHz processor.
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Memory: 1936292k/1964992k available (2015k kernel code, 27436k reserved, 916k data, 364k init, 1047488k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 0.000000] .init : 0xc03e3000 - 0xc043e000 ( 364 kB)
[ 0.000000] .data : 0xc02f7d26 - 0xc03dce84 ( 916 kB)
[ 0.000000] .text : 0xc0100000 - 0xc02f7d26 (2015 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 0.000000] SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
[ 0.000000] hpet0: at MMIO 0xfefff000, IRQs 2, 8, 31
[ 0.000000] hpet0: 3 32-bit timers, 25000000 Hz
[ 0.080000] Calibrating delay using timer specific routine.. 5204.91 BogoMIPS (lpj=10409837)
[ 0.080000] Security Framework v1.0.0 initialized
[ 0.080000] SELinux: Disabled at boot.
[ 0.080000] Mount-cache hash table entries: 512
[ 0.080000] CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000011f
[ 0.080000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.080000] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.080000] CPU 0(2) -> Core 0
[ 0.080000] CPU: After all inits, caps: 178bfbff ebd3fbff 00000000 00000410 00002001 00000000 0000011f
[ 0.080000] Compat vDSO mapped to ffffe000.
[ 0.080000] Checking 'hlt' instruction... OK.
[ 0.096000] SMP alternatives: switching to UP code
[ 0.096000] Early unpacking initramfs... done
[ 0.336000] ACPI: Core revision 20070126
[ 0.336000] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[ 0.340000] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 5000+ stepping 01
[ 0.340000] SMP alternatives: switching to SMP code
[ 0.340000] Booting processor 1/1 eip 3000
[ 0.352000] Initializing CPU#1
[ 0.432000] Calibrating delay using timer specific routine.. 5200.01 BogoMIPS (lpj=10400036)
[ 0.432000] CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000011f
[ 0.432000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.432000] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.432000] CPU 1(2) -> Core 1
[ 0.432000] CPU: After all inits, caps: 178bfbff ebd3fbff 00000000 00000410 00002001 00000000 0000011f
[ 0.432000] CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 5000+ stepping 01
[ 0.432000] Total of 2 processors activated (10404.93 BogoMIPS).
[ 0.432000] ENABLING IO-APIC IRQs
[ 0.432000] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.472000] Brought up 2 CPUs
[ 0.500000] migration_cost=4000
[ 0.500000] Booting paravirtualized kernel on bare hardware
[ 0.500000] Time: 14:38:51 Date: 03/11/108
[ 0.500000] NET: Registered protocol family 16
[ 0.500000] EISA bus registered
[ 0.500000] ACPI: bus type pci registered
[ 0.544000] PCI: PCI BIOS revision 3.00 entry at 0xf1ec0, last bus=2
[ 0.544000] PCI: Using configuration type 1
[ 0.544000] Setting up standard PCI resources
[ 0.548000] ACPI: EC: Look up EC in DSDT
[ 0.552000] ACPI: Interpreter enabled
[ 0.552000] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.552000] ACPI: Using IOAPIC for interrupt routing
[ 0.560000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.560000] PCI: Probing PCI hardware (bus 00)
[ 0.560000] PCI: Transparent bridge - 0000:00:04.0
[ 0.560000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.560000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 0.596000] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.596000] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.596000] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 *11 14 15)
[ 0.596000] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 *10 11 14 15)
[ 0.596000] ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.596000] ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.596000] ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.596000] ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.596000] ACPI: PCI Interrupt Link [LIGP] (IRQs 5 7 9 *10 11 14 15)
[ 0.596000] ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.596000] ACPI: PCI Interrupt Link [LUBA] (IRQs 5 *7 9 10 11 14 15)
[ 0.596000] ACPI: PCI Interrupt Link [LMAC] (IRQs 5 *7 9 10 11 14 15)
[ 0.596000] ACPI: PCI Interrupt Link [LAZA] (IRQs *5 7 9 10 11 14 15)
[ 0.596000] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.596000] ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 10 *11 14 15)
[ 0.596000] ACPI: PCI Interrupt Link [LUB2] (IRQs *5 7 9 10 11 14 15)
[ 0.596000] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.596000] ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 10 *11 14 15)
[ 0.596000] ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.596000] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
[ 0.596000] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
[ 0.596000] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0
[ 0.596000] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0
[ 0.596000] ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled.
[ 0.600000] ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0, disabled.
[ 0.600000] ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled.
[ 0.600000] ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled.
[ 0.600000] ACPI: PCI Interrupt Link [AIGP] (IRQs 22 23) *0
[ 0.600000] ACPI: PCI Interrupt Link [APCF] (IRQs 22 23) *0
[ 0.600000] ACPI: PCI Interrupt Link [APCH] (IRQs 22 23) *0
[ 0.600000] ACPI: PCI Interrupt Link [APMU] (IRQs 22 23) *0, disabled.
[ 0.600000] ACPI: PCI Interrupt Link [AAZA] (IRQs 22 23) *0
[ 0.600000] ACPI: PCI Interrupt Link [APCS] (IRQs 22 23) *0
[ 0.600000] ACPI: PCI Interrupt Link [APCL] (IRQs 22 23) *0
[ 0.600000] ACPI: PCI Interrupt Link [APCM] (IRQs 22 23) *0, disabled.
[ 0.600000] ACPI: PCI Interrupt Link [APCZ] (IRQs 22 23) *0, disabled.
[ 0.600000] ACPI: PCI Interrupt Link [APSI] (IRQs 20) *0
[ 0.600000] ACPI: PCI Interrupt Link [APSJ] (IRQs 21) *0, disabled.
[ 0.600000] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 0.600000] pnp: PnP ACPI init
[ 0.600000] ACPI: bus type pnp registered
[ 0.604000] pnp: PnP ACPI: found 11 devices
[ 0.604000] ACPI: ACPI bus type pnp unregistered
[ 0.604000] PnPBIOS: Disabled by ACPI PNP
[ 0.604000] PCI: Using ACPI for IRQ routing
[ 0.604000] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 0.632000] NET: Registered protocol family 8
[ 0.632000] NET: Registered protocol family 20
[ 0.632000] pnp: 00:01: ioport range 0x1000-0x107f has been reserved
[ 0.632000] pnp: 00:01: ioport range 0x1080-0x10ff has been reserved
[ 0.632000] pnp: 00:01: ioport range 0x1400-0x147f has been reserved
[ 0.632000] pnp: 00:01: ioport range 0x1480-0x14ff has been reserved
[ 0.632000] pnp: 00:01: ioport range 0x1800-0x187f has been reserved
[ 0.632000] pnp: 00:01: ioport range 0x1880-0x18ff has been reserved
[ 0.632000] pnp: 00:09: iomem range 0xf0000000-0xf3ffffff could not be reserved
[ 0.632000] pnp: 00:0a: iomem range 0xfefff000-0xfefff0ff could not be reserved
[ 0.632000] pnp: 00:0a: iomem range 0xffff0000-0xffffffff could not be reserved
[ 0.632000] pnp: 00:0a: iomem range 0x77f00000-0x7fefffff could not be reserved
[ 0.632000] pnp: 00:0a: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.636000] Time: hpet clocksource has been installed.
[ 0.636000] Switched to high resolution mode on CPU 0
[ 0.636000] Switched to high resolution mode on CPU 1
[ 0.664000] PCI: Bridge: 0000:00:04.0
[ 0.664000] IO window: c000-cfff
[ 0.664000] MEM window: fde00000-fdefffff
[ 0.664000] PREFETCH window: fdb00000-fdbfffff
[ 0.664000] PCI: Bridge: 0000:00:09.0
[ 0.664000] IO window: b000-bfff
[ 0.664000] MEM window: fdd00000-fddfffff
[ 0.664000] PREFETCH window: fdc00000-fdcfffff
[ 0.664000] PCI: Setting latency timer of device 0000:00:04.0 to 64
[ 0.664000] PCI: Setting latency timer of device 0000:00:09.0 to 64
[ 0.664000] NET: Registered protocol family 2
[ 0.708000] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.708000] TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
[ 0.708000] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.708000] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.708000] TCP reno registered
[ 0.724000] checking if image is initramfs... it is
[ 1.188000] Freeing initrd memory: 7340k freed
[ 1.188000] audit: initializing netlink socket (disabled)
[ 1.188000] audit(1207924732.136:1): initialized
[ 1.188000] highmem bounce pool size: 64 pages
[ 1.188000] VFS: Disk quotas dquot_6.5.1
[ 1.188000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.188000] io scheduler noop registered
[ 1.188000] io scheduler anticipatory registered
[ 1.188000] io scheduler deadline registered
[ 1.188000] io scheduler cfq registered (default)
[ 1.192000] Boot video device is 0000:00:0d.0
[ 1.192000] PCI: Setting latency timer of device 0000:00:09.0 to 64
[ 1.192000] assign_interrupt_mode Found MSI capability
[ 1.192000] Allocate Port Service[0000:00:09.0:pcie00]
[ 1.192000] isapnp: Scanning for PnP cards...
[ 1.544000] isapnp: No Plug & Play device found
[ 1.560000] Real Time Clock Driver v1.12ac
[ 1.560000] hpet_resources: 0xfefff000 is busy
[ 1.560000] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 1.560000] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
[ 1.560000] ACPI: PCI Interrupt 0000:01:0a.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 16
[ 1.560000] 0000:01:0a.0: ttyS0 at I/O 0xcc08 (irq = 16) is a 16450
[ 1.560000] 0000:01:0a.0: ttyS1 at I/O 0xcc10 (irq = 16) is a 8250
[ 1.560000] 0000:01:0a.0: ttyS2 at I/O 0xcc18 (irq = 16) is a 16450
[ 1.564000] 0000:01:0a.0: ttyS3 at I/O 0xcc20 (irq = 16) is a 8250
[ 1.564000] Couldn't register serial port 0000:01:0a.0: -28
[ 1.564000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 1.564000] input: Macintosh mouse button emulation as /class/input/input0
[ 1.564000] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 1.564000] PNP: PS/2 controller doesn't have AUX irq; using default 12
[ 1.816000] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.816000] mice: PS/2 mouse device common for all mice
[ 1.816000] EISA: Probing bus 0 at eisa.0
[ 1.816000] Cannot allocate resource for EISA slot 1
[ 1.816000] EISA: Detected 0 cards.
[ 1.816000] TCP cubic registered
[ 1.816000] NET: Registered protocol family 1
[ 1.816000] Using IPI No-Shortcut mode
[ 1.816000] Magic number: 4:877:636
[ 1.816000] hash matches device ptycf
[ 1.816000] Freeing unused kernel memory: 364k freed
[ 1.836000] input: AT Translated Set 2 keyboard as /class/input/input1
[ 3.144000] AppArmor: AppArmor initialized<5>audit(1207924734.136:2): type=1505 info="AppArmor initialized" pid=1257
[ 3.156000] fuse init (API version 7.8)
[ 3.164000] Failure registering capabilities with primary security module.
[ 3.192000] ACPI: Fan [FAN] (on)
[ 3.200000] ACPI: Thermal Zone [THRM] (40 C)
[ 4.168000] SCSI subsystem initialized
[ 4.188000] forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60.
[ 4.188000] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23
[ 4.188000] ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [APCH] -> GSI 23 (level, low) -> IRQ 17
[ 4.188000] PCI: Setting latency timer of device 0000:00:07.0 to 64
[ 4.188000] forcedeth: using HIGHDMA
[ 4.192000] libata version 2.21 loaded.
[ 4.212000] usbcore: registered new interface driver usbfs
[ 4.212000] usbcore: registered new interface driver hub
[ 4.212000] usbcore: registered new device driver usb
[ 4.212000] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[ 4.708000] eth0: forcedeth.c: subsystem: 0103c:2a66 bound to 0000:00:07.0
[ 4.708000] sata_nv 0000:00:08.0: version 3.4
[ 4.708000] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 20
[ 4.708000] ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [APSI] -> GSI 20 (level, low) -> IRQ 18
[ 4.708000] PCI: Setting latency timer of device 0000:00:08.0 to 64
[ 4.708000] scsi0 : sata_nv
[ 4.708000] scsi1 : sata_nv
[ 4.708000] ata1: SATA max UDMA/133 cmd 0x000109f0 ctl 0x00010bf2 bmdma 0x0001d800 irq 18
[ 4.708000] ata2: SATA max UDMA/133 cmd 0x00010970 ctl 0x00010b72 bmdma 0x0001d808 irq 18
[ 5.176000] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 5.184000] ata1.00: ATA-7: ST3400820AS, 3.CHL, max UDMA/100
[ 5.184000] ata1.00: 781422768 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 5.200000] ata1.00: configured for UDMA/100
[ 5.668000] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 5.832000] ata2.00: ATAPI: TSSTcorpCD/DVDW TS-H653L, 0714, max UDMA/33
[ 5.832000] ata2.00: applying bridge limits
[ 6.004000] ata2.00: configured for UDMA/33
[ 6.004000] scsi 0:0:0:0: Direct-Access ATA ST3400820AS 3.CH PQ: 0 ANSI: 5
[ 6.004000] scsi 1:0:0:0: CD-ROM TSSTcorp CD/DVDW TS-H653L 0714 PQ: 0 ANSI: 5
[ 6.004000] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 22
[ 6.004000] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 22 (level, low) -> IRQ 19
[ 6.004000] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 6.004000] ohci_hcd 0000:00:02.0: OHCI Host Controller
[ 6.004000] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
[ 6.004000] ohci_hcd 0000:00:02.0: irq 19, io mem 0xfe02f000
[ 6.060000] usb usb1: configuration #1 chosen from 1 choice
[ 6.060000] hub 1-0:1.0: USB hub found
[ 6.060000] hub 1-0:1.0: 10 ports detected
[ 6.164000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 6.164000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 6.168000] NFORCE-MCP61: IDE controller at PCI slot 0000:00:06.0
[ 6.168000] NFORCE-MCP61: chipset revision 162
[ 6.168000] NFORCE-MCP61: not 100% native mode: will probe irqs later
[ 6.168000] NFORCE-MCP61: 0000:00:06.0 (rev a2) UDMA133 controller
[ 6.168000] ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
[ 6.168000] Probing IDE interface ide0...
[ 6.468000] usb 1-4: new low speed USB device using ohci_hcd and address 2
[ 6.684000] usb 1-4: configuration #1 chosen from 1 choice
[ 6.740000] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 23
[ 6.740000] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCL] -> GSI 23 (level, low) -> IRQ 17
[ 6.740000] PCI: Setting latency timer of device 0000:00:02.1 to 64
[ 6.740000] ehci_hcd 0000:00:02.1: EHCI Host Controller
[ 6.740000] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2
[ 6.740000] ehci_hcd 0000:00:02.1: debug port 1
[ 6.740000] PCI: cache line size of 64 is not supported by device 0000:00:02.1
[ 6.740000] ehci_hcd 0000:00:02.1: irq 17, io mem 0xfe02e000
[ 6.740000] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 6.740000] usb usb2: configuration #1 chosen from 1 choice
[ 6.740000] hub 2-0:1.0: USB hub found
[ 6.740000] hub 2-0:1.0: 10 ports detected
[ 6.844000] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
[ 6.844000] ACPI: PCI Interrupt 0000:01:05.0[A] -> Link [APC4] -> GSI 19 (level, low) -> IRQ 20
[ 6.896000] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[20] MMIO=[fdeff000-fdeff7ff] Max Packet=[1024] IR/IT contexts=[8/8]
[ 6.896000] sd 0:0:0:0: [sda] 781422768 512-byte hardware sectors (400088 MB)
[ 6.896000] sd 0:0:0:0: [sda] Write Protect is off
[ 6.896000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 6.896000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.896000] sd 0:0:0:0: [sda] 781422768 512-byte hardware sectors (400088 MB)
[ 6.896000] sd 0:0:0:0: [sda] Write Protect is off
[ 6.896000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 6.896000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.896000] sda: sda1 sda2 sda3 sda4
[ 6.924000] sd 0:0:0:0: [sda] Attached SCSI disk
[ 6.932000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 6.932000] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 6.936000] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
[ 6.936000] Uniform CD-ROM driver Revision: 3.20
[ 6.936000] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 7.020000] usb 1-4: USB disconnect, address 2
[ 7.020000] usbcore: registered new interface driver hiddev
[ 7.208000] Attempting manual resume
[ 7.208000] swsusp: Resume From Partition 8:3
[ 7.208000] PM: Checking swsusp image.
[ 7.208000] PM: Resume from disk failed.
[ 7.248000] kjournald starting. Commit interval 5 seconds
[ 7.248000] EXT3-fs: mounted filesystem with ordered data mode.
[ 7.572000] usb 2-5: new high speed USB device using ehci_hcd and address 3
[ 7.720000] usb 2-5: configuration #1 chosen from 1 choice
[ 7.960000] usb 2-9: new high speed USB device using ehci_hcd and address 4
[ 8.180000] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0011d8000169dc47]
[ 8.252000] usb 2-9: configuration #1 chosen from 1 choice
[ 8.252000] usbcore: registered new interface driver usbhid
[ 8.252000] /build/buildd/linux-source-2.6.22-2.6.22/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[ 8.556000] usb 1-4: new low speed USB device using ohci_hcd and address 3
[ 8.772000] usb 1-4: configuration #1 chosen from 1 choice
[ 8.788000] input: Microsoft Microsoft Wireless Optical Mouse® 1.00 as /class/input/input2
[ 8.788000] input: USB HID v1.11 Mouse [Microsoft Microsoft Wireless Optical Mouse® 1.00] on usb-0000:00:02.0-4
[ 12.868000] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x1c00
[ 12.868000] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x1c40
[ 13.396000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 13.400000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 13.416000] input: PC Speaker as /class/input/input3
[ 13.432000] Linux agpgart interface v0.102 (c) Dave Jones
[ 13.488000] usbcore: registered new interface driver libusual
[ 13.548000] Initializing USB Mass Storage driver...
[ 13.548000] scsi2 : SCSI emulation for USB Mass Storage devices
[ 13.548000] usbcore: registered new interface driver usb-storage
[ 13.548000] USB Mass Storage support registered.
[ 13.548000] usb-storage: device found at 3
[ 13.548000] usb-storage: waiting for device to settle before scanning
[ 13.808000] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 22
[ 13.808000] ACPI: PCI Interrupt 0000:00:05.0[B] -> Link [AAZA] -> GSI 22 (level, low) -> IRQ 19
[ 13.808000] PCI: Setting latency timer of device 0000:00:05.0 to 64
[ 13.924000] ieee80211_init: failed to initialize WME (err=-17)
[ 13.936000] iwlwifi_rc80211_simple: Unknown symbol iwlwifi_ieee80211_rate_control_unregister
[ 13.936000] iwlwifi_rc80211_simple: Unknown symbol iwlwifi_sta_info_put
[ 13.936000] iwlwifi_rc80211_simple: Unknown symbol iwlwifi_sta_info_get
[ 13.936000] iwlwifi_rc80211_simple: Unknown symbol iwlwifi_ieee80211_rate_control_register
[ 13.936000] wmaster0: Selected rate control algorithm 'simple'
[ 14.004000] usbcore: registered new interface driver rt73usb
[ 14.060000] hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
[ 14.512000] lp: driver loaded but no devices found
[ 14.620000] Adding 1951888k swap on /dev/sda3. Priority:-1 extents:1 across:1951888k
[ 15.020000] EXT3 FS on sda4, internal journal
[ 16.672000] No dock devices found.
[ 16.864000] input: Power Button (FF) as /class/input/input4
[ 16.864000] ACPI: Power Button (FF) [PWRF]
[ 16.864000] input: Power Button (CM) as /class/input/input5
[ 16.864000] ACPI: Power Button (CM) [PWRB]
[ 17.096000] powernow-k8: Found 2 AMD Athlon(tm) 64 X2 Dual Core Processor 5000+ processors (version 2.00.00)
[ 17.096000] powernow-k8: 0 : fid 0x12 (2600 MHz), vid 0x8
[ 17.096000] powernow-k8: 1 : fid 0x10 (2400 MHz), vid 0xa
[ 17.096000] powernow-k8: 2 : fid 0xe (2200 MHz), vid 0xc
[ 17.096000] powernow-k8: 3 : fid 0xc (2000 MHz), vid 0xe
[ 17.096000] powernow-k8: 4 : fid 0xa (1800 MHz), vid 0x10
[ 17.096000] powernow-k8: 5 : fid 0x2 (1000 MHz), vid 0x12
[ 18.548000] usb-storage: device scan complete
[ 18.552000] scsi 2:0:0:0: Direct-Access Generic- Compact Flash 1.00 PQ: 0 ANSI: 0 CCS
[ 18.560000] scsi 2:0:0:1: Direct-Access Generic- SM/xD-Picture 1.00 PQ: 0 ANSI: 0 CCS
[ 18.568000] scsi 2:0:0:2: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 0 CCS
[ 18.580000] scsi 2:0:0:3: Direct-Access Generic- MS/MS-Pro 1.00 PQ: 0 ANSI: 0 CCS
[ 18.584000] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[ 18.584000] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 18.588000] sd 2:0:0:1: [sdc] Attached SCSI removable disk
[ 18.588000] sd 2:0:0:1: Attached scsi generic sg3 type 0
[ 18.588000] sd 2:0:0:2: [sdd] Attached SCSI removable disk
[ 18.588000] sd 2:0:0:2: Attached scsi generic sg4 type 0
[ 18.592000] sd 2:0:0:3: [sde] Attached SCSI removable disk
[ 18.592000] sd 2:0:0:3: Attached scsi generic sg5 type 0
[ 19.136000] eth0: no link during initialization.
[ 20.212000] ppdev: user-space parallel port driver
[ 20.484000] audit(1207906750.890:3): type=1503 operation="inode_permission" requested_mask="a" denied_mask="a" name="/dev/tty" pid=5237 profile="/usr/sbin/cupsd"
[ 20.568000] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[ 20.568000] apm: disabled - APM is not SMP safe.
[ 21.808000] Failure registering capabilities with primary security module.
[ 21.976000] Bluetooth: Core ver 2.11
[ 21.976000] NET: Registered protocol family 31
[ 21.976000] Bluetooth: HCI device and connection manager initialized
[ 21.976000] Bluetooth: HCI socket layer initialized
[ 21.992000] Bluetooth: L2CAP ver 2.8
[ 21.992000] Bluetooth: L2CAP socket layer initialized
[ 21.996000] Bluetooth: RFCOMM socket layer initialized
[ 21.996000] Bluetooth: RFCOMM TTY layer initialized
[ 21.996000] Bluetooth: RFCOMM ver 1.8
[ 22.500000] Clocksource tsc unstable (delta = -153874459 ns)
[ 66.224000] UDF-fs: No VRS found
[ 66.272000] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 66.336000] ISO 9660 Extensions: RRIP_1991A
[ 73.000000] NET: Registered protocol family 10
[ 73.000000] lo: Disabled Privacy Extensions
[ 73.000000] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 73.000000] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 296.068000] NTFS driver 2.1.28 [Flags: R/O MODULE].
[ 644.108000] device 1057:3052 is grabbed by driver serial: try to release
[ 644.116000] ACPI: PCI interrupt for device 0000:01:0a.0 disabled
[ 644.240000] slamr: module license 'Smart Link Ltd.' taints kernel.
[ 644.252000] slamr: SmartLink AMRMO modem.
[ 644.252000] slamr: probe 1057:3052 SL1900 card...
[ 644.252000] ACPI: PCI Interrupt 0000:01:0a.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 16
[ 644.460000] slamr: slamr0 is SL1900 card.
[ 847.880000] PPP generic driver version 2.4.2
[ 848.936000] PPP BSD Compression module registered
[ 849.024000] PPP Deflate Compression module registered
