DC RE: needs the SmartLink driver slmodemd is NOT a driver. Rather it acts through one of several hardware specific drivers (snd-hda-intel, snd-via82xx-modem, snd-atiixp-modem, snd-intel8x0m, slamr or slusb) which provide low level contact with the hardware. The higher level COMM functionality was partitioned into slmodemd by maintainer Sasha Khapyorsky. slmodemd remains effective across multiple kernels, and only the low level drivers have to be updated with kernel changes. RE: the fact that there is an intel sound driver kinda puzzles me, High Definition Audio (HDA) support under Linux was first coded for an Intel HDA audio card. Hence the driver name given: snd-hda-intel. Subsequently support for many other Vendor's HDA cards was blended in, while retaining the driver name snd-hda-intel. HDA cards can host softmodem chips in their Subsystems, and the low level modem support was also added to snd-hha-intel. Again the high level COMM support is provided by slmodemd. MarvS On Sat, Mar 22, 2008 at 9:56 PM, D. C. <someone23@xxxxxxxxx> wrote: > Marvin (and everyone else), > > exactly the modem I was thinking (it has actually worked for me on > suse9.1). The fact that i needs the SmartLink driver and the fact that > there is an intel sound driver kinda puzzles me, - no wonder I could not > figure it out myself. Will do - probably on Thursday, and tell you what > happens. > > thank you. > > > Marvin Stodolsky wrote: > > > > Try this one first > > ============== > > 00-06: Si3054 Modem : Si3054 Modem : playback 1 : capture 1 > > Codec: Motorola Si3054 > > -------------- > > if uses the onboard snd-hda-intel audio+ modem driver > > > > Download from http://linmodems.technion.ac.il/packages/smartlink/ > > the package SLMODEMD.gcc4.1.tar.gz having a compiled slmodemd. Unpack > > under Linux with: > > $ tar zxf SLMODEMD.gcc4.1.tar.gz > > and read instructions therein. But briefly, the modem is setup with command: > > sudo slmodemd -c USA --alsa hw:0,6 > > reporting dynamic creation of ports: > > /dev/ttySL0 --> /dev/pts/N , with N some number > > Read Smartlink.txt and Modem/YourSystem.txt for follow through guidance. > > > > MarvS > > > > > > > > > > On Thu, Mar 20, 2008 at 12:59 PM, dc42390@xxxxxxxxx wrote: > > > >> I'd like to start by thanking you for the awesome work you guys do. This > >> mailing list is very helpful. > >> > >> Okay, in any of you remember, I posted here on tuesday. Anyway, I was > >> able to load Ubuntu 7.10 LiveCD and test all my modems with the latest > >> ScanModem script. Here is what came up for all of my modems. Which modem > >> would you like me to try first, the Smartlink or the Lucent/Agere? Also > >> I have an intel modem I was able to get to work, but it goes into some > >> strange expansion slot I fail to recognize (the slot is brown, about > >> half the size of PCI and NOT on my main computer, which I want to run > >> linux on). All of my other modems are PCI. I dont know of it matters, > >> but I have a wierd soundcard configuration. I have an integrated HD > >> soundcard and a soundBlaster Live!Value in a PCI slot (i use it for my > >> digital-only speakers). > >> > >> HERE IS THE INFO. FOR MY LUCENT/AGERE PCI MODEM the chip says 1648C-TV5 > >> > >> Only plain text email is forwarded by the Discuss@xxxxxxxxxxxxx List > >> Server, > >> as HTML can contain viruses. Use as the email Subject Line: > >> YourName, YourCountry kernel 2.6.22-14-generic > >> With this Subject Line cogent experts will be alerted, and useful case > >> names left in the Archive. > >> YourCountry will enable Country specific guidance. Your contry's local > >> Linux experts > >> can be found through: http://www.linux.org/groups/index.html. > >> They will know your Country's modem code, which may be essential for > >> dialup service. > >> Responses from Discuss@xxxxxxxxxxxxx are sometimes blocked by an > >> Internet Provider mail filters. > >> So in a day, also check the Archived responses at http://www.linmodems.org > >> -------------------------- System information ---------------------------- > >> CPU=i686, > >> Linux version 2.6.22-14-generic (buildd@palmer) (gcc version 4.1.3 > >> 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Sun Oct 14 > >> 23:05:12 GMT 2007 > >> scanModem update of: 2008_03_16 > >> > >> > >> There are no blacklisted modem drivers in /etc/modprobe* files > >> PCI slot 00:10.1 has a High Definition Audio Card > >> > >> The Advanced Linux Sound Architecture (ALSA) packages providing audio > >> support, > >> also includes drivers for some modems. The ALSA diagnostics are written > >> during > >> bootup to /proc/asound/ folders. > >> > >> > >> The ALSA verion is 1.0.14 > >> The modem cards detected by "aplay -l" are: > >> > >> > >> The /proc/asound/pcm file reports: > >> ----------------------- > >> 00-03: emu10k1 : Multichannel Playback : playback 1 > >> 00-02: emu10k1 efx : Multichannel Capture/PT Playback : playback 8 : > >> capture 1 > >> 00-01: emu10k1 mic : Mic Capture : capture 1 > >> 00-00: emu10k1 : ADC Capture/Standard PCM Playback : playback 32 : capture 1 > >> 01-00: STAC92xx Analog : STAC92xx Analog : playback 1 : capture 2 > >> > >> about /proc/asound/cards: > >> ------------------------ > >> 0 [Live ]: EMU10K1 - SBLive! Value [CT4871] > >> SBLive! Value [CT4871] (rev.8, serial:0x80321102) > >> at 0x9400, irq 21 > >> 1 [NVidia ]: HDA-Intel - HDA NVidia > >> HDA NVidia at 0xfe024000 irq 16 > >> > >> > >> Modem support under STAC92xx audio card hosts may require upgrade > >> of snd-hda-intel + its dependent drivers to ALSA version 1.0.16. > >> The following modem only worked after the upgrade from to 1.0.16 from 1.0.14 > >> PCI ID SubsystemID Name > >> --------- --------- -------------- > >> 8086:27d8 107b:0366 Audio device: Intel Corporation 82801G > >> with ALSA diagnostics > >> 00-00: STAC92xx Analog : STAC92xx Analog : playback 1 : capture 2 > >> 00-06: Si3054 Modem : Si3054 Modem : playback 1 : capture 1 > >> Codec: Motorola Si3054 > >> for 107b:0366 hosted modem chip: 0x10573057 > >> > >> For a standard Ubuntu system needed to support the driver compilation were > >> > >> USB modem not detected by lsusb > >> > >> For candidate card in slot 04:08.0, firmware information and bootup > >> diagnostics are: > >> PCI slot PCI ID SubsystemID Name > >> ---------- --------- --------- -------------- > >> 04:08.0 11c1:044e 1235:044e Communication controller: Agere > >> Systems LT WinModem > >> > >> Modem interrupt assignment and sharing: > >> 17: 10203 IO-APIC-fasteoi sata_nv > >> --- Bootup diagnostics for card in PCI slot 04:08.0 ---- > >> > >> For candidate card in slot 00:10.1, firmware information and bootup > >> diagnostics are: > >> PCI slot PCI ID SubsystemID Name > >> ---------- --------- --------- -------------- > >> 00:10.1 10de:026c 1028:01ed Audio device: nVidia Corporation > >> MCP51 High Definition Audio > >> > >> Modem interrupt assignment and sharing: > >> 16: 1853 IO-APIC-fasteoi ehci_hcd:usb1, HDA Intel > >> --- Bootup diagnostics for card in PCI slot 00:10.1 ---- > >> [ 120.940714] ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [AAZA] -> GSI > >> 23 (level, low) -> IRQ 16 > >> [ 120.940739] PCI: Setting latency timer of device 0000:00:10.1 to 64 > >> > >> > >> === Finished modem firmware and bootup diagnostics section. === > >> === Next deducing cogent software === > >> > >> Completed candidate modem analyses. > >> > >> The base of the UDEV device file system is: /dev/.udev > >> > >> Versions adequately match for the compiler installed: 4.1.3 > >> and the compiler used in kernel assembly: 4.1.3 > >> > >> > >> > >> Minimal compiling resources appear complete: > >> make utility - /usr/bin/make > >> Compiler version 4.1 > >> linuc_headers base folder /lib/modules/2.6.22-14-generic/build > >> > >> However some compilations and executable functions may need additional > >> files, > >> in the FileNames.h (so called kernel "h"eaders) collection installed > >> in /usr/include/ . > >> For martian_modem, additional required packages are libc6-dev (and for > >> Debian/Ubuntu, linux-libc-dev). The also required headers of package > >> libc6 are commonly installed by default. > >> > >> > >> > >> If a driver compilation fails, with message including some lack of some > >> FileName.h (stdio.h for example), then > >> Some additional kernel-header files need installation to /usr/include. > >> The minimal additional packages are libc6-dev > >> and any of its dependents, under Ubuntu linux-libc-dev > >> > >> If an alternate ethernet connection is available, > >> $ apt-get update > >> $ apt-get -s install linux-kernel-devel > >> will install needed package > >> For Debian/Ubuntu related distributions, run the following command to > >> display the needed package list: > >> > >> Otherwise packages have to be found through http://packages.ubuntu.com > >> Once downloaded and transferred into a Linux partition, > >> they can be installed alltogether with: > >> $ sudo dpkg -i *.deb > >> > >> > >> Checking pppd properties: > >> -rwsr-xr-- 1 root dip 269256 2007-10-04 19:57 /usr/sbin/pppd > >> > >> In case of an "error 17" "serial loopback" problem, see: > >> http://linmodems.technion.ac.il/linmodems/archive-sixth/msg02637.html > >> > >> To enable dialout without Root permission do: > >> $ su - root (not for Ubuntu) > >> sudo chmod a+x /usr/sbin/pppd > >> or under Ubuntu related Linuxes > >> sudo chmod a+x /usr/sbin/pppd > >> > >> Checking settings of: /etc/ppp/options > >> asyncmap 0 > >> noauth > >> crtscts > >> lock > >> hide-password > >> modem > >> proxyarp > >> lcp-echo-interval 30 > >> lcp-echo-failure 4 > >> noipx > >> > >> In case of a message like: > >> Warning: Could not modify /etc/ppp/pap-secrets: Permission denied > >> see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html > >> > >> Read Modem/YourSystem.txt concerning other COMM channels: eth0 eth0:avah > >> Which can interfere with Browser naviagation. > >> > >> Don't worry about the following, it is for the experts > >> should trouble shooting be necessary. > >> ========================================================== > >> > >> Checking for modem support lines: > >> -------------------------------------- > >> /device/modem symbolic link: > >> slmodemd created symbolic link /dev/ttySL0: > >> Within /etc/udev/ files: > >> > >> Within /etc/modprobe.conf files: > >> /etc/modprobe.d/alsa-base:options snd-atiixp-modem index=-2 > >> /etc/modprobe.d/alsa-base:options snd-via82xx-modem index=-2 > >> /etc/modprobe.d/blacklist-modem:# Uncomment these entries in order to > >> blacklist unwanted modem drivers > >> /etc/modprobe.d/blacklist-modem:# blacklist snd-atiixp-modem > >> /etc/modprobe.d/blacklist-modem:# blacklist snd-via82xx-modem > >> Within any ancient /etc/devfs files: > >> > >> Within ancient kernel 2.4.n /etc/module.conf files: > >> > >> --------- end modem support lines -------- > >> > >> IF THIS IS OF ANY HELP, I DISTINCTLY REMEMBER THIS PARTICULAR MODEM > >> WORKING UNDER SUSE 9.1 BUT IS STARTED HARD-FREEZING THE PC AFTER I > >> "UPGRADED" TO 10.0 > >> > >> HERE IS THE DATA FOR MY SMARTLINK MODEM > >> > >> Only plain text email is forwarded by the Discuss@xxxxxxxxxxxxx List > >> Server, > >> as HTML can contain viruses. Use as the email Subject Line: > >> YourName, YourCountry kernel 2.6.22-14-generic > >> With this Subject Line cogent experts will be alerted, and useful case > >> names left in the Archive. > >> YourCountry will enable Country specific guidance. Your contry's local > >> Linux experts > >> can be found through: http://www.linux.org/groups/index.html. > >> They will know your Country's modem code, which may be essential for > >> dialup service. > >> Responses from Discuss@xxxxxxxxxxxxx are sometimes blocked by an > >> Internet Provider mail filters. > >> So in a day, also check the Archived responses at http://www.linmodems.org > >> -------------------------- System information ---------------------------- > >> CPU=i686, > >> Linux version 2.6.22-14-generic (buildd@palmer) (gcc version 4.1.3 > >> 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Sun Oct 14 > >> 23:05:12 GMT 2007 > >> scanModem update of: 2008_03_16 > >> > >> > >> There are no blacklisted modem drivers in /etc/modprobe* files > >> PCI slot 00:10.1 has a High Definition Audio Card > >> > >> The Advanced Linux Sound Architecture (ALSA) packages providing audio > >> support, > >> also includes drivers for some modems. The ALSA diagnostics are written > >> during > >> bootup to /proc/asound/ folders. > >> > >> > >> The ALSA verion is 1.0.14 > >> The modem cards detected by "aplay -l" are: > >> > >> > >> The /proc/asound/pcm file reports: > >> ----------------------- > >> 00-00: STAC92xx Analog : STAC92xx Analog : playback 1 : capture 2 > >> 01-03: emu10k1 : Multichannel Playback : playback 1 > >> 01-02: emu10k1 efx : Multichannel Capture/PT Playback : playback 8 : > >> capture 1 > >> 01-01: emu10k1 mic : Mic Capture : capture 1 > >> 01-00: emu10k1 : ADC Capture/Standard PCM Playback : playback 32 : capture 1 > >> > >> about /proc/asound/cards: > >> ------------------------ > >> 0 [NVidia ]: HDA-Intel - HDA NVidia > >> HDA NVidia at 0xfe024000 irq 17 > >> 1 [Live ]: EMU10K1 - SBLive! Value [CT4871] > >> SBLive! Value [CT4871] (rev.8, serial:0x80321102) > >> at 0x9800, irq 22 > >> > >> > >> Modem support under STAC92xx audio card hosts may require upgrade > >> of snd-hda-intel + its dependent drivers to ALSA version 1.0.16. > >> The following modem only worked after the upgrade from to 1.0.16 from 1.0.14 > >> PCI ID SubsystemID Name > >> --------- --------- -------------- > >> 8086:27d8 107b:0366 Audio device: Intel Corporation 82801G > >> with ALSA diagnostics > >> 00-00: STAC92xx Analog : STAC92xx Analog : playback 1 : capture 2 > >> 00-06: Si3054 Modem : Si3054 Modem : playback 1 : capture 1 > >> Codec: Motorola Si3054 > >> for 107b:0366 hosted modem chip: 0x10573057 > >> > >> For a standard Ubuntu system needed to support the driver compilation were > >> > >> USB modem not detected by lsusb > >> > >> For candidate card in slot 04:08.0, firmware information and bootup > >> diagnostics are: > >> PCI slot PCI ID SubsystemID Name > >> ---------- --------- --------- -------------- > >> 04:08.0 163c:3052 1688:0811 Modem: Smart Link Ltd. SmartLink > >> SmartPCI562 56K Modem > >> > >> Modem interrupt assignment and sharing: > >> --- Bootup diagnostics for card in PCI slot 04:08.0 ---- > >> [ 34.177614] ACPI: PCI Interrupt 0000:04:08.0[A] -> Link [APC1] -> GSI > >> 16 (level, low) -> IRQ 16 > >> [ 34.177896] 0000:04:08.0: ttyS0 at I/O 0x9c08 (irq = 16) is a 16450 > >> [ 34.178058] 0000:04:08.0: ttyS1 at I/O 0x9c10 (irq = 16) is a 8250 > >> [ 34.178217] 0000:04:08.0: ttyS2 at I/O 0x9c18 (irq = 16) is a 16450 > >> [ 34.178374] 0000:04:08.0: ttyS3 at I/O 0x9c20 (irq = 16) is a 8250 > >> [ 34.178450] Couldn't register serial port 0000:04:08.0: -28 > >> > >> For candidate card in slot 00:10.1, firmware information and bootup > >> diagnostics are: > >> PCI slot PCI ID SubsystemID Name > >> ---------- --------- --------- -------------- > >> 00:10.1 10de:026c 1028:01ed Audio device: nVidia Corporation > >> MCP51 High Definition Audio > >> > >> Modem interrupt assignment and sharing: > >> 17: 3735 IO-APIC-fasteoi ehci_hcd:usb1, HDA Intel > >> --- Bootup diagnostics for card in PCI slot 00:10.1 ---- > >> [ 88.512294] ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [AAZA] -> GSI > >> 23 (level, low) -> IRQ 17 > >> [ 88.512314] PCI: Setting latency timer of device 0000:00:10.1 to 64 > >> > >> > >> === Finished modem firmware and bootup diagnostics section. === > >> === Next deducing cogent software === > >> > >> > >> Predictive diagnostics for card in bus 04:08.0: > >> Modem chipset detected on > >> CLASS="Class 0703: 163c:3052" > >> NAME="Modem: Smart Link Ltd. SmartLink SmartPCI562 56K Modem " > >> PCIDEV=163c:3052 > >> SUBSYS=1688:0811 > >> IRQ=16 > >> IDENT=slamr > >> > >> For candidate modem in: 04:08.0 > >> Class 0703: 163c:3052 Modem: Smart Link Ltd. SmartLink SmartPCI562 > >> 56K Modem > >> Primary PCI_id 163c:3052 > >> Support type needed or chipset: slamr > >> > >> > >> ----------------end Softmodem section -------------- > >> The modem is supported by the Smartlink slamr driver > >> plus the slmodemd helper utility. Read the > >> Smartlink.txt and Modem/YourSystem.txt for follow through guidance. > >> > >> > >> Download slamr-2.6.22-14-generic.tar.gz from > >> http://linmodems.technion.il/packages/smartlink/Ubuntu/ > >> under Linux, open a terminal and unpack with: > >> $ tar zxvf slamr*.tar.gz > >> Move into the unpacked folder > >> $ cd slamr-2.6.22-14-generic > >> Look around > >> $ ls > >> Run the > >> $ sudo ./setup > >> > >> Afterwards do: > >> $ slmodemd --help > >> $ slmodemd --countrylist &> Clist.txt > >> If not in the USA, look for your COUNTRY_NAME therein. > >> Do and edit with: > >> $ sudo gedit /etc/default/sl-modem-daemon > >> and therein replace the USA in the line: > >> SLMODEMD_COUNTRY=USA > >> This will provide for the correct Country setting in the automated: > >> slmodemd -c COUNTRY /dev/slamr0 > >> > >> Read the Smartlink.txt and YourSystem.txt > >> Writing Smartlink.txt > >> ============ end Smartlink section ===================== > >> > >> > >> Predictive diagnostics for card in bus 00:10.1: > >> Modem chipset not detected on > >> CLASS="Class 0403: 10de:026c" > >> NAME="Audio device: nVidia Corporation MCP51 High Definition Audio " > >> PCIDEV=10de:026c > >> SUBSYS=1028:01ed > >> IRQ=17 > >> HDA=10de:026c > >> SOFT=10de:026c.HDA > >> > >> > >> High Definition Audio (HDA) cards MAY host a modem chip in their > >> Subsystem, > >> and many are supported by the ALSA audio+modem driver snd-hda-intel > >> A modem was not detected on HDA card 10de:026c. > >> If another modem card is present, then most likely 10de:026c does not > >> host a modem. > >> If another modem card has not been detected, then possibilities are: > >> 1) A Conexant modem chip is present on 10de:026c, as Conexant chips > >> are frequently not detectable by ALSA diagnostics > >> 2) The modem may be of the older non-PCI Controller Chipset > >> (hardware) type. > >> Try detection with Root permission: > >> sudo wvdialconf /etc/wvdial.conf > >> > >> For candidate modem in: 00:10.1 > >> Class 0403: 10de:026c Audio device: nVidia Corporation MCP51 High > >> Definition Audio > >> Primary PCI_id 10de:026c > >> Subsystem PCI_id 1028:01ed > >> Softmodem codec or chipset from diagnostics: > >> from Archives: > >> > >> > >> > >> Lacking a dsp (digital signal processing) chip, the modem is a software > >> intensive or "softmodem" type. Its primary controller manages the traffic > >> with the CPU. But the software needed is specified in the Subsystem. > >> ----------------------------------------- > >> Support type needed or chipset: > >> > >> Support can likely be achieved through two mutually exclusive alternatives: > >> 1) The hsfmodem software for Conexant chipset modems: Read Conexant.txt > >> The following ALSA alternative CANNOT work with Conexant modems. > >> > >> 2) An ALSA modem driver plus slmodemd. Read Smartlink.txt for details, and > >> to test get the package SLMODEMD.gcc4.1.tar.gz from: > >> http://linmodems.technion.ac.il/packages/smartlink/ > >> > >> ----------------end Softmodem section -------------- > >> > >> Completed candidate modem analyses. > >> > >> The base of the UDEV device file system is: /dev/.udev > >> > >> Versions adequately match for the compiler installed: 4.1.3 > >> and the compiler used in kernel assembly: 4.1.3 > >> > >> > >> > >> Minimal compiling resources appear complete: > >> make utility - /usr/bin/make > >> Compiler version 4.1 > >> linuc_headers base folder /lib/modules/2.6.22-14-generic/build > >> > >> However some compilations and executable functions may need additional > >> files, > >> in the FileNames.h (so called kernel "h"eaders) collection installed > >> in /usr/include/ . > >> For martian_modem, additional required packages are libc6-dev (and for > >> Debian/Ubuntu, linux-libc-dev). The also required headers of package > >> libc6 are commonly installed by default. > >> > >> > >> > >> If a driver compilation fails, with message including some lack of some > >> FileName.h (stdio.h for example), then > >> Some additional kernel-header files need installation to /usr/include. > >> The minimal additional packages are libc6-dev > >> and any of its dependents, under Ubuntu linux-libc-dev > >> > >> If an alternate ethernet connection is available, > >> $ apt-get update > >> $ apt-get -s install linux-kernel-devel > >> will install needed package > >> For Debian/Ubuntu related distributions, run the following command to > >> display the needed package list: > >> > >> Otherwise packages have to be found through http://packages.ubuntu.com > >> Once downloaded and transferred into a Linux partition, > >> they can be installed alltogether with: > >> $ sudo dpkg -i *.deb > >> > >> > >> Checking pppd properties: > >> -rwsr-xr-- 1 root dip 269256 2007-10-04 19:57 /usr/sbin/pppd > >> > >> In case of an "error 17" "serial loopback" problem, see: > >> http://linmodems.technion.ac.il/linmodems/archive-sixth/msg02637.html > >> > >> To enable dialout without Root permission do: > >> $ su - root (not for Ubuntu) > >> sudo chmod a+x /usr/sbin/pppd > >> or under Ubuntu related Linuxes > >> sudo chmod a+x /usr/sbin/pppd > >> > >> Checking settings of: /etc/ppp/options > >> asyncmap 0 > >> noauth > >> crtscts > >> lock > >> hide-password > >> modem > >> proxyarp > >> lcp-echo-interval 30 > >> lcp-echo-failure 4 > >> noipx > >> > >> In case of a message like: > >> Warning: Could not modify /etc/ppp/pap-secrets: Permission denied > >> see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html > >> > >> Read Modem/YourSystem.txt concerning other COMM channels: eth0 eth0:avah > >> Which can interfere with Browser naviagation. > >> > >> Don't worry about the following, it is for the experts > >> should trouble shooting be necessary. > >> ========================================================== > >> > >> Checking for modem support lines: > >> -------------------------------------- > >> /device/modem symbolic link: > >> slmodemd created symbolic link /dev/ttySL0: > >> Within /etc/udev/ files: > >> > >> Within /etc/modprobe.conf files: > >> /etc/modprobe.d/alsa-base:options snd-atiixp-modem index=-2 > >> /etc/modprobe.d/alsa-base:options snd-via82xx-modem index=-2 > >> /etc/modprobe.d/blacklist-modem:# Uncomment these entries in order to > >> blacklist unwanted modem drivers > >> /etc/modprobe.d/blacklist-modem:# blacklist snd-atiixp-modem > >> /etc/modprobe.d/blacklist-modem:# blacklist snd-via82xx-modem > >> Within any ancient /etc/devfs files: > >> > >> Within ancient kernel 2.4.n /etc/module.conf files: > >> > >> --------- end modem support lines -------- > >> > >> I AM ALSO INCLUDING THE INTEL MODEM FILE, IT WORKS LIKE A CHARM WITH THE > >> DRIVERS THAT COME WITH UBUNTU 7.10 (OR AT LEAST I WAS ABLE TO CALL MY > >> CELL PHONE WITH THIS MODEM). > >> > >> Only plain text email is forwarded by the Discuss@xxxxxxxxxxxxx List > >> Server, > >> as HTML can contain viruses. Use as the email Subject Line: > >> YourName, YourCountry kernel 2.6.22-14-generic > >> With this Subject Line cogent experts will be alerted, and useful case > >> names left in the Archive. > >> YourCountry will enable Country specific guidance. Your contry's local > >> Linux experts > >> can be found through: http://www.linux.org/groups/index.html. > >> They will know your Country's modem code, which may be essential for > >> dialup service. > >> Responses from Discuss@xxxxxxxxxxxxx are sometimes blocked by an > >> Internet Provider mail filters. > >> So in a day, also check the Archived responses at http://www.linmodems.org > >> -------------------------- System information ---------------------------- > >> CPU=i686, > >> Linux version 2.6.22-14-generic (buildd@palmer) (gcc version 4.1.3 > >> 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Sun Oct 14 > >> 23:05:12 GMT 2007 > >> scanModem update of: 2008_03_16 > >> The modem symbolic link is /dev/modem -> ttySL0 > >> The slmodemd set symbolic link is /dev/ttySL0 -> /dev/pts/2 > >> > >> There are no blacklisted modem drivers in /etc/modprobe* files > >> > >> The Advanced Linux Sound Architecture (ALSA) packages providing audio > >> support, > >> also includes drivers for some modems. The ALSA diagnostics are written > >> during > >> bootup to /proc/asound/ folders. > >> > >> > >> The ALSA verion is 1.0.14 > >> The modem cards detected by "aplay -l" are: > >> card 1: Modem [Intel 82801DB-ICH4 Modem], device 0: Intel ICH - Modem > >> [Intel 82801DB-ICH4 Modem - Modem] > >> > >> The /proc/asound/pcm file reports: > >> ----------------------- > >> 00-04: Intel ICH - IEC958 : Intel 82801DB-ICH4 - IEC958 : playback 1 > >> 00-03: Intel ICH - ADC2 : Intel 82801DB-ICH4 - ADC2 : capture 1 > >> 00-02: Intel ICH - MIC2 ADC : Intel 82801DB-ICH4 - MIC2 ADC : capture 1 > >> 00-01: Intel ICH - MIC ADC : Intel 82801DB-ICH4 - MIC ADC : capture 1 > >> 00-00: Intel ICH : Intel 82801DB-ICH4 : playback 1 : capture 1 > >> 01-00: Intel ICH - Modem : Intel 82801DB-ICH4 Modem - Modem : playback 1 > >> : capture 1 > >> > >> about /proc/asound/cards: > >> ------------------------ > >> 0 [I82801DBICH4 ]: ICH4 - Intel 82801DB-ICH4 > >> Intel 82801DB-ICH4 with ALC650E at irq 16 > >> 1 [Modem ]: ICH-MODEM - Intel 82801DB-ICH4 Modem > >> Intel 82801DB-ICH4 Modem at irq 16 > >> > >> > >> The driver snd-intel8x0m with its dependent drivers: > >> snd_intel8x0m 18572 5 > >> snd_ac97_codec 100644 4 > >> snd_atiixp_modem,snd_via82xx_modem,snd_intel8x0m,snd_intel8x0 > >> snd_pcm 80388 8 > >> snd_atiixp_modem,snd_via82xx_modem,snd_intel8x0m,snd_intel8x0,snd_ac97_codec,snd_pcm_oss > >> snd 54660 23 > >> snd_atiixp_modem,snd_via82xx_modem,snd_intel8x0m,snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device > >> snd_page_alloc 11400 5 > >> snd_atiixp_modem,snd_via82xx_modem,snd_intel8x0m,snd_intel8x0,snd_pcm > >> ---------- > >> provide modem + audio support. > >> > >> Lines in: /proc/asound/card1/codec97#0/mc97#1-1+regs > >> ------------------------------- > >> 0:7c = 5349 and 0:7e = 4c27 > >> are translated from hexadecimal code into the modem chip identifier: SIL27 > >> > >> USB modem not detected by lsusb > >> > >> For candidate card in slot 00:1f.6, firmware information and bootup > >> diagnostics are: > >> PCI slot PCI ID SubsystemID Name > >> ---------- --------- --------- -------------- > >> 00:1f.6 8086:24c6 104d:8128 Modem: Intel Corporation > >> 82801DB/DBL/DBM > >> > >> Modem interrupt assignment and sharing: > >> 16: 18341 IO-APIC-fasteoi Intel 82801DB-ICH4, Intel > >> 82801DB-ICH4 Modem > >> --- Bootup diagnostics for card in PCI slot 00:1f.6 ---- > >> [ 30.899879] ACPI: PCI Interrupt 0000:00:1f.6[B] -> GSI 17 (level, > >> low) -> IRQ 16 > >> [ 30.899888] ACPI: PCI interrupt for device 0000:00:1f.6 disabled > >> [ 263.138239] ACPI: PCI Interrupt 0000:00:1f.6[B] -> GSI 17 (level, > >> low) -> IRQ 16 > >> [ 263.138268] PCI: Setting latency timer of device 0000:00:1f.6 to 64 > >> > >> The PCI slot 00:1f.6 of the modem card may be disabled early in > >> a bootup process, but then enabled later. If modem drivers load > >> but the modem is not responsive, read Bootup.txt about possible fixes. > >> Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx > >> if help is needed. > >> > >> > >> > >> === Finished modem firmware and bootup diagnostics section. === > >> === Next deducing cogent software === > >> > >> Completed candidate modem analyses. > >> > >> The base of the UDEV device file system is: /dev/.udev > >> > >> Versions adequately match for the compiler installed: 4.1.3 > >> and the compiler used in kernel assembly: 4.1.3 > >> > >> > >> > >> Minimal compiling resources appear complete: > >> make utility - /usr/bin/make > >> Compiler version 4.1 > >> linuc_headers base folder /lib/modules/2.6.22-14-generic/build > >> > >> However some compilations and executable functions may need additional > >> files, > >> in the FileNames.h (so called kernel "h"eaders) collection installed > >> in /usr/include/ . > >> For martian_modem, additional required packages are libc6-dev (and for > >> Debian/Ubuntu, linux-libc-dev). The also required headers of package > >> libc6 are commonly installed by default. > >> > >> > >> > >> If a driver compilation fails, with message including some lack of some > >> FileName.h (stdio.h for example), then > >> Some additional kernel-header files need installation to /usr/include. > >> The minimal additional packages are libc6-dev > >> and any of its dependents, under Ubuntu linux-libc-dev > >> > >> If an alternate ethernet connection is available, > >> $ apt-get update > >> $ apt-get -s install linux-kernel-devel > >> will install needed package > >> For Debian/Ubuntu related distributions, run the following command to > >> display the needed package list: > >> > >> Otherwise packages have to be found through http://packages.ubuntu.com > >> Once downloaded and transferred into a Linux partition, > >> they can be installed alltogether with: > >> $ sudo dpkg -i *.deb > >> > >> > >> Checking pppd properties: > >> -rwsr-xr-- 1 root dip 269256 2007-10-04 19:57 /usr/sbin/pppd > >> > >> In case of an "error 17" "serial loopback" problem, see: > >> http://linmodems.technion.ac.il/linmodems/archive-sixth/msg02637.html > >> > >> To enable dialout without Root permission do: > >> $ su - root (not for Ubuntu) > >> sudo chmod a+x /usr/sbin/pppd > >> or under Ubuntu related Linuxes > >> sudo chmod a+x /usr/sbin/pppd > >> > >> Checking settings of: /etc/ppp/options > >> asyncmap 0 > >> noauth > >> crtscts > >> lock > >> hide-password > >> modem > >> proxyarp > >> lcp-echo-interval 30 > >> lcp-echo-failure 4 > >> noipx > >> > >> In case of a message like: > >> Warning: Could not modify /etc/ppp/pap-secrets: Permission denied > >> see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html > >> > >> Read Modem/YourSystem.txt concerning other COMM channels: eth0 > >> Which can interfere with Browser naviagation. > >> > >> Don't worry about the following, it is for the experts > >> should trouble shooting be necessary. > >> ========================================================== > >> > >> # start/stop the daemon when the USB modem is connected > >> KERNEL=="slusb[0-9]*", GROUP="dialout", RUN+="/etc/init.d/sl-modem-daemon" > >> Checking for modem support lines: > >> -------------------------------------- > >> /device/modem symbolic link: lrwxrwxrwx 1 root root 6 2008-03-20 > >> 10:24 /dev/modem -> ttySL0 > >> slmodemd created symbolic link /dev/ttySL0: lrwxrwxrwx 1 root root 10 > >> 2008-03-20 10:24 /dev/ttySL0 -> /dev/pts/2 > >> Within /etc/udev/ files: > >> /etc/udev/rules.d/030_sl-modem-daemon.rules:# start/stop the daemon when > >> the USB modem is connected > >> /etc/udev/rules.d/030_sl-modem-daemon.rules:KERNEL=="slusb[0-9]*", > >> GROUP="dialout", RUN+="/etc/init.d/sl-modem-daemon" > >> /etc/udev/sl-modem-daemon.rules:# start/stop the daemon when the USB > >> modem is connected > >> /etc/udev/sl-modem-daemon.rules:KERNEL=="slusb[0-9]*", GROUP="dialout", > >> RUN+="/etc/init.d/sl-modem-daemon" > >> Within /etc/modprobe.conf files: > >> /etc/modprobe.d/sl-modem-daemon.modutils:install slamr modprobe > >> --ignore-install ungrab-winmodem ; modprobe --ignore-install slamr; > >> test -e /dev/slamr0 || (/bin/mknod -m 660 /dev/slamr0 c 242 0 > >> 2>/dev/null && chgrp dialout /dev/slamr0) > >> /etc/modprobe.d/alsa-base:options snd-atiixp-modem index=-2 > >> /etc/modprobe.d/alsa-base:options snd-via82xx-modem index=-2 > >> /etc/modprobe.d/blacklist-modem:# Uncomment these entries in order to > >> blacklist unwanted modem drivers > >> /etc/modprobe.d/blacklist-modem:# blacklist snd-atiixp-modem > >> /etc/modprobe.d/blacklist-modem:# blacklist snd-via82xx-modem > >> Within any ancient /etc/devfs files: > >> > >> Within ancient kernel 2.4.n /etc/module.conf files: > >> > >> --------- end modem support lines -------- > >> > >> > >> > >> > >> > >> > >> Also, if there is any good reason why I souldn't use OpenSuse 10.3, > >> throw the DVD in the garbage, and download Fedora instead, please tell > >> me now. The reason I dont just use ubuntu is that since I have dial-up > >> at home (but my school has 5MByte per second fiber), I cant download > >> much and dont want to waste time treading through the dependancy-swamp. > >> > >> thank you guys for all your help. > >> > >> PS. i also have a conexant modem which works with the Linixant drivers, > >> but the modem was free and I do not indent to pay $20 for the drivers. > >> If worst comes to worst, I'll use that $20 to start a "DSL savings fund" > >> for myself. > >> > >> --paranoid-about-putting-my-name-on-the-internet > >> > >> > > > > > >
