Re: Anita Kuno, Canada, kernel 2.6.20-15-generic

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Yay, that was it.  I am writing this from Ubuntu!!  And I'm so happy.
Thanks for the persistence and patience.
And for the record, binutils was not installed and I had to install
it, I just didn't show it.

Thank you,
Anita.




On Sun, Mar 9, 2008 at 10:17 AM, Marvin Stodolsky
<marvin.stodolsky@xxxxxxxxx> wrote:
> RE:  /usr/bin/ld: crt1.o: No such file: No such file or directory
> evidently it is the crt1.o   missing on your system, on mine its  at
> /usr/lib/crt1.o
> and provided by  the lib6-dev package
>
> You need to install both  linux-libc-dev and libc6-dev packages
> After downlaod,
> $ sudo dpkg -i  li*.deb
>
> MarvS
>
>
>
>
>
>
> On Sun, Mar 9, 2008 at 12:45 AM, Anita Kuno <ay.kuno@xxxxxxxxx> wrote:
> > Suggestions followed.  Results attached.
> >
> >
> >
> >  Thanks,
> >  Anita.
> >
> >
> >
> >
> >  Marvin Stodolsky wrote:
> >  > Anita
> >  >
> >  > Here's the problem:
> >  > /usr/bin/ld: crt1.o: No such file: No such file or directory
> >  > ld is contained in the package binutils
> >  > Possible it is on your  installl disk. Try
> >  > $ sudo apt-get install binutils
> >  >
> >  > If not thus installed, get it by searching  here:
> >  > http://packages.ubuntu.com/
> >  > which will lead to
> >  > http://packages.ubuntu.com/search?keywords=binutils&searchon=names&suite=gutsy&section=all
> >  >
> >  > Under Linux, it can be installed with
> >  > $ sudo dpkg *.deb
> >  >
> >  > MarvS
> >  >
> >  > On Sat, Mar 8, 2008 at 7:18 PM, Anita Kuno <ay.kuno@xxxxxxxxx> wrote:
> >  >
> >  >> Both the latest terminal log and configure log are attached.
> >  >>
> >  >>
> >  >>
> >  >>  Thanks,
> >  >>  Anita.
> >  >>
> >  >>
> >  >>
> >  >>
> >  >>  Marvin Stodolsky wrote:
> >  >>  > RE: >  Also I am not running slmodemd during this process
> >  >>  > Not relevant, but shut it down.
> >  >>  >
> >  >>  > RE:  checking for gcc... gcc
> >  >>  > checking for C compiler default output file name... configure: error:
> >  >>  > C compiler cannot create executables
> >  >>  > See `config.log' for more details.
> >  >>  > --------------------------------
> >  >>  > I  remember this oddball problem.  But can't at the moment remember
> >  >>  > the cause and  cannot now reproduce it on my System.   Best send  me
> >  >>  > config.log
> >  >>  >
> >  >>  > MarvS
> >  >>  >
> >  >>  >
> >  >>  > On Sat, Mar 8, 2008 at 1:51 PM, Anita Kuno <ay.kuno@xxxxxxxxx> wrote:
> >  >>  >
> >  >>  >> I followed your suggestions, Marvin.
> >  >>  >>
> >  >>  >>  The results as shown by the terminal are attached.
> >  >>  >>
> >  >>  >>  Also I am not running slmodemd during this process.
> >  >>  >>  Should I be?
> >  >>  >>
> >  >>  >>
> >  >>  >>
> >  >>  >>  Thanks,
> >  >>  >>  Anita.
> >  >>  >>
> >  >>  >>
> >  >>  >>  Marvin Stodolsky wrote:
> >  >>  >>  > Anita
> >  >>  >>  >
> >  >>  >>  > RE:  accepted location for compiling.
> >  >>  >>  > You could also have worked in your personal /home/User/  folder.
> >  >>  >>  > But the / folder on any folder with SYSTEm files should not be used.
> >  >>  >>  >
> >  >>  >>  > WHAT=something
> >  >>  >>  > are created in memory space, and can be called/used from any folder.
> >  >>  >>  > They can be displayed by:
> >  >>  >>  > $  echo $WHAT
> >  >>  >>  > WHAT=something
> >  >>  >>  >
> >  >>  >>  > Do a precautionary (assuming LoginName is anita)
> >  >>  >>  > $ sudo chown -R anita:anita /usr/src/modules
> >  >>  >>  > Then try the configure command again.  Output  on my SYstem is shown below
> >  >>  >>  > If  there is a failure, what is the output of
> >  >>  >>  > $ ls -l /usr/bin/gcc*
> >  >>  >>  >
> >  >>  >>  > MarvS
> >  >>  >>  > -------------------------------------------
> >  >>  >>  >
> >  >>  >>  > marv@marvdesk:/usr/src/modules/alsa-1.0.15/alsa-driver-1.0.15$
> >  >>  >>  > ./configure --with-kernel=$HEADERS --with-build=$HEADERS
> >  >>  >>  > --with-cards=hda-intel
> >  >>  >>  > checking for gcc... gcc
> >  >>  >>  > checking for C compiler default output file name... a.out
> >  >>  >>  > checking whether the C compiler works... yes
> >  >>  >>  > checking whether we are cross compiling... no
> >  >>  >>  > checking for suffix of executables...
> >  >>  >>  > checking for suffix of object files... o
> >  >>  >>  > checking whether we are using the GNU C compiler... yes
> >  >>  >>  > checking whether gcc accepts -g... yes
> >  >>  >>  > checking for gcc option to accept ISO C89... none needed
> >  >>  >>  > checking for ranlib... ranlib
> >  >>  >>  > checking for a BSD-compatible install... /usr/bin/install -c
> >  >>  >>  > checking how to run the C preprocessor... gcc -E
> >  >>  >>  > checking for grep that handles long lines and -e... /bin/grep
> >  >>  >>  > checking for egrep... /bin/grep -E
> >  >>  >>  > checking for ANSI C header files... yes
> >  >>  >>  > checking for an ANSI C-conforming const... yes
> >  >>  >>  > checking for inline... inline
> >  >>  >>  > checking whether time.h and sys/time.h may both be included... yes
> >  >>  >>  > checking whether gcc needs -traditional... no
> >  >>  >>  > checking for current directory...
> >  >>  >>  > /usr/src/modules/alsa-1.0.15/alsa-driver-1.0.15
> >  >>  >>  > checking cross compile...
> >  >>  >>  > checking for directory with kernel source...
> >  >>  >>  > /lib/modules/2.6.22-14-generic/build
> >  >>  >>  > checking for directory with kernel build... /lib/modules/2.6.22-14-generic/build
> >  >>  >>  > checking for kernel linux/version.h... yes
> >  >>  >>  > checking for kernel linux/autoconf.h... yes
> >  >>  >>  > checking for kernel version... 2.6.22-14-generic
> >  >>  >>  > checking for GCC version... Kernel compiler:  Used compiler: gcc (GCC)
> >  >>  >>  > 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)
> >  >>  >>  > checking for built-in ALSA... no
> >  >>  >>  > checking for existing ALSA module... yes
> >  >>  >>  > checking for Red Hat kernel... auto
> >  >>  >>  > checking for Red Hat kernel... no
> >  >>  >>  > checking for SUSE kernel... auto
> >  >>  >>  > checking for SUSE kernel... no
> >  >>  >>  > checking for CONFIG_EXPERIMENTAL... yes
> >  >>  >>  > checking for kernel linux/config.h... no
> >  >>  >>  > Creating <linux/config.h>...
> >  >>  >>  > checking to modify of kernel linux/kmod.h... no
> >  >>  >>  > checking for kernel linux/utsrelease.h... yes
> >  >>  >>  > checking for kernel linux/compiler.h... yes
> >  >>  >>  > checking for kernel linux/pm.h... yes
> >  >>  >>  > checking for kernel linux/spinlock.h... yes
> >  >>  >>  > checking for kernel linux/irq.h... yes
> >  >>  >>  > checking for kernel linux/threads.h... yes
> >  >>  >>  > checking for kernel linux/rwsem.h... yes
> >  >>  >>  > checking for kernel linux/gameport.h... yes
> >  >>  >>  > checking for kernel media/v4l2-dev.h... yes
> >  >>  >>  > checking for kernel linux/devfs_fs_kernel.h... no
> >  >>  >>  > Creating a dummy <linux/devfs_fs_kernel.h>...
> >  >>  >>  > checking for kernel linux/highmem.h... yes
> >  >>  >>  > checking for kernel linux/workqueue.h... yes
> >  >>  >>  > checking for kernel linux/dma-mapping.h... yes
> >  >>  >>  > checking for kernel asm/hw_irq.h... yes
> >  >>  >>  > checking for kernel linux/device.h... yes
> >  >>  >>  > checking for kernel linux/platform_device.h... yes
> >  >>  >>  > checking for kernel linux/isa.h... yes
> >  >>  >>  > checking for kernel linux/jiffies.h... yes
> >  >>  >>  > checking for kernel linux/compat.h... yes
> >  >>  >>  > checking for kernel linux/log2.h... yes
> >  >>  >>  > checking for kernel linux/adb.h... yes
> >  >>  >>  > checking for kernel linux/cuda.h... yes
> >  >>  >>  > checking for kernel linux/pmu.h... yes
> >  >>  >>  > checking for kernel linux/moduleparam.h... yes
> >  >>  >>  > checking for kernel linux/syscalls.h... yes
> >  >>  >>  > checking for kernel linux/firmware.h... yes
> >  >>  >>  > checking for kernel linux/err.h... yes
> >  >>  >>  > checking for kernel linux/bitmap.h... yes
> >  >>  >>  > checking for kernel linux/mutex.h... yes
> >  >>  >>  > checking for kernel linux/latency.h... yes
> >  >>  >>  > checking for kernel linux/kthread.h... yes
> >  >>  >>  > checking for kernel asm/irq_regs.h... yes
> >  >>  >>  > checking for kernel module symbol versions... yes
> >  >>  >>  > checking for has ioport support... yes
> >  >>  >>  > checking for PCI support in kernel... yes
> >  >>  >>  > checking for I2C driver in kernel... module
> >  >>  >>  > checking for I2C_POWERMAC in kernel... unknown
> >  >>  >>  > checking for firmware loader... yes
> >  >>  >>  > checking for input subsystem in kernel... yes
> >  >>  >>  > checking for directory to store kernel modules...
> >  >>  >>  > /lib/modules/2.6.22-14-generic/kernel/sound
> >  >>  >>  > checking for verbose procfs... on
> >  >>  >>  > checking for verbose printk... on
> >  >>  >>  > checking for debug level... none
> >  >>  >>  > checking for ISA support in kernel... yes
> >  >>  >>  > checking for processor type... i586
> >  >>  >>  > checking for i386 machine type... default
> >  >>  >>  > checking for ISA DMA API... yes
> >  >>  >>  > checking for SMP... yes
> >  >>  >>  > checking for Video device support in kernel... yes
> >  >>  >>  > checking for ISA PnP driver in kernel... yes
> >  >>  >>  > checking for PnP driver in kernel... yes
> >  >>  >>  > checking for Kernel ISA-PnP support... yes
> >  >>  >>  > checking for strlcpy... yes
> >  >>  >>  > checking for snprintf... yes
> >  >>  >>  > checking for vsnprintf... yes
> >  >>  >>  > checking for scnprintf... yes
> >  >>  >>  > checking for sscanf... yes
> >  >>  >>  > checking for vmalloc_to_page... yes
> >  >>  >>  > checking for old kmod... no
> >  >>  >>  > checking for PDE... yes
> >  >>  >>  > checking for pci_set_consistent_dma_mask... yes
> >  >>  >>  > checking for pci_dev_present... yes
> >  >>  >>  > checking for msleep... yes
> >  >>  >>  > checking for msleep_interrupt... yes
> >  >>  >>  > checking for msecs_to_jiffies... yes
> >  >>  >>  > checking for tty->count is the atomic type... no
> >  >>  >>  > checking for video_get_drvdata... yes
> >  >>  >>  > checking for V4L1 layer... yes
> >  >>  >>  > checking for io_remap_pfn_range... yes
> >  >>  >>  > checking for kcalloc... yes
> >  >>  >>  > checking for kstrdup... yes
> >  >>  >>  > checking for kzalloc... yes
> >  >>  >>  > checking for create_workqueue with flags... no
> >  >>  >>  > checking for saved_config_space in pci_dev... yes
> >  >>  >>  > checking for new pci_save_state... yes
> >  >>  >>  > checking for register_sound_special_device... yes
> >  >>  >>  > checking for driver version... 1.0.15
> >  >>  >>  > checking for sequencer support... yes
> >  >>  >>  > checking for OSS/Free emulation... yes
> >  >>  >>  > checking for OSS PCM plugin system inclusion... yes
> >  >>  >>  > checking for RTC callback support in kernel... yes
> >  >>  >>  > checking for HPET support... yes
> >  >>  >>  > checking for dynamic minor numbers... no
> >  >>  >>  > checking for support of old API... yes
> >  >>  >>  > checking for Procfs support... yes
> >  >>  >>  > checking for USB support... yes
> >  >>  >>  > checking for class_simple... no
> >  >>  >>  > checking for old driver suspend/resume callbacks... no
> >  >>  >>  > checking for removal of page-reservation for nopage/mmap... yes
> >  >>  >>  > checking for nested class_device... yes
> >  >>  >>  > checking for new IRQ handler... yes
> >  >>  >>  > checking for gfp_t... yes
> >  >>  >>  > checking for PnP suspend/resume... yes
> >  >>  >>  > checking for new unlocked/compat_ioctl... yes
> >  >>  >>  > checking for x86-compatible PC... yes
> >  >>  >>  > checking for High-Res timers... yes
> >  >>  >>  > checking for kernel PCMCIA
> >  >>  >>  > checking for PCMCIA support... yes
> >  >>  >>  > checking for PC9800 support in kernel... no
> >  >>  >>  > checking for parallel port support... yes
> >  >>  >>  > checking for power management... yes
> >  >>  >>  > checking for which soundcards to compile driver for... hda-intel
> >  >>  >>  > configure: creating ./config.status
> >  >>  >>  > config.status: creating version
> >  >>  >>  > config.status: creating Makefile.conf
> >  >>  >>  > config.status: WARNING:  Makefile.conf.in seems to ignore the
> >  >>  >>  > --datarootdir setting
> >  >>  >>  > config.status: creating snddevices
> >  >>  >>  > config.status: creating utils/alsa-driver.spec
> >  >>  >>  > config.status: creating utils/buildrpm
> >  >>  >>  > config.status: creating toplevel.config
> >  >>  >>  > config.status: creating utils/alsasound
> >  >>  >>  > config.status: creating utils/alsasound.posix
> >  >>  >>  > config.status: creating include/pci_ids_compat.h
> >  >>  >>  > config.status: creating include/i2c-id_compat.h
> >  >>  >>  > config.status: creating include/config.h
> >  >>  >>  > config.status: creating include/config1.h
> >  >>  >>  > config.status: creating include/version.h
> >  >>  >>  > config.status: include/version.h is unchanged
> >  >>  >>  > config.status: creating include/autoconf-extra.h
> >  >>  >>  > config.status: include/autoconf-extra.h is unchanged
> >  >>  >>  > Hacking autoconf.h...
> >  >>  >>  > marv@marvdesk:/usr/src/modules/alsa-1.0.15/alsa-driver-1.0.15$
> >  >>  >>  >
> >  >>  >>  >
> >  >>  >>  >
> >  >>  >>  > On Sat, Mar 8, 2008 at 12:22 PM, Anita Kuno <ay.kuno@xxxxxxxxx> wrote:
> >  >>  >>  >
> >  >>  >>  >> Thank you, Marvin for providing me with the information about the
> >  >>  >>  >>  accepted location for compiling.
> >  >>  >>  >>  Your email was the first I had heard of it.
> >  >>  >>  >>
> >  >>  >>  >>  I see that in this email the creation of HEADERS takes place within the
> >  >>  >>  >>  alsa-driver-1.0.16 directory,
> >  >>  >>  >>  whereas yesterday your email stated that I should create HEADERS whilst
> >  >>  >>  >>  in the alsa folder and then move into
> >  >>  >>  >>  the alsa-driver-1.0.16 directory.  Since it is referencing an absolute
> >  >>  >>  >>  path, I am assuming that the location where
> >  >>  >>  >>  it is created is not of much importance, but I did notice a difference.
> >  >>  >>  >>
> >  >>  >>  >>  You will find a terminal log from my latest attempt attached.  I didn't
> >  >>  >>  >>  bother with the config.log
> >  >>  >>  >>  this time, but if that is of importance, I can include that as well next
> >  >>  >>  >>  time.
> >  >>  >>  >>
> >  >>  >>  >>
> >  >>  >>  >>
> >  >>  >>  >>  Thanks,
> >  >>  >>  >>  Anita.
> >  >>  >>  >>
> >  >>  >>  >>
> >  >>  >>  >>
> >  >>  >>  >>  Marvin Stodolsky wrote:
> >  >>  >>  >>  > Anita,
> >  >>  >>  >>  >  Uninstall the sl-modem-daemon package. It only provides some automation.
> >  >>  >>  >>  > It is Not useful for your HDA modem at this stage and will only confuse issues.
> >  >>  >>  >>  >
> >  >>  >>  >>  > Your problem below is that you are trying to work in the root "/"
> >  >>  >>  >>  > partition and that is illegal under Unix/Linux
> >  >>  >>  >>  > The standard position for compiling stuff is in sub-folders of
> >  >>  >>  >>  > /usr/src/modules.  So
> >  >>  >>  >>  > $ sudo mkdir -p  /usr/src/modules
> >  >>  >>  >>  > $ sudo mv   /alsa  /usr/src/modules/
> >  >>  >>  >>  > $ chown -R  anita:anita  /usr/src/modules
> >  >>  >>  >>  > gives anita to work therein without "sudo"
> >  >>  >>  >>  > $ cd /usr/src/modules/alsa/ alsa-driver-1.0.16/
> >  >>  >>  >>  > $  HEADERS=/lib/modules/2.6.20-15-generic/build
> >  >>  >>  >>  > $ ./configure --with-kernel=$HEADERS   --with-build=$HEADERS
> >  >>  >>  >>  > --with-cards=hda-intel
> >  >>  >>  >>  > will not have file creation problems now.
> >  >>  >>  >>  >
> >  >>  >>  >>  > Just beginners problems.
> >  >>  >>  >>  >
> >  >>  >>  >>  > MarvS
> >  >>  >>  >>  >
> >  >>  >>  >>  > On Fri, Mar 7, 2008 at 2:09 PM, Anita Kuno <ay.kuno@xxxxxxxxx> wrote:
> >  >>  >>  >>  >
> >  >>  >>  >>  >> So a number of people are asking me if I have sl-modem-daemon.
> >  >>  >>  >>  >>
> >  >>  >>  >>  >>  And I didn't know.  So it was suggested I run:
> >  >>  >>  >>  >>  apt-cache policy sl-modem-daemon
> >  >>  >>  >>  >>
> >  >>  >>  >>  >>  So I did:
> >  >>  >>  >>  >>  /$ apt-cache policy sl-modem-daemon
> >  >>  >>  >>  >>  W: Unable to locate package sl-modem-daemon
> >  >>  >>  >>  >>
> >  >>  >>  >>  >>  So others seem to feel this is an important piece of information.
> >  >>  >>  >>  >>
> >  >>  >>  >>  >>  How do people on this list feel?
> >  >>  >>  >>  >>
> >  >>  >>  >>  >>
> >  >>  >>  >>  >>
> >  >>  >>  >>  >>  Thanks,
> >  >>  >>  >>  >>  Anita.
> >  >>  >>  >>  >>
> >  >>  >>  >>  >>
> >  >>  >>  >>  >>
> >  >>  >>  >>  >>
> >  >>  >>  >>  >>
> >  >>  >>  >>  >>  Marvin Stodolsky wrote:
> >  >>  >>  >>  >>  > Anita,
> >  >>  >>  >>  >>  >
> >  >>  >>  >>  >>  > Looks like the long form of the configure command is necessary
> >  >>  >>  >>  >>  > Make a useful definition:
> >  >>  >>  >>  >>  > $  HEADERS=/lib/modules/2.6.20-15-generic/build
> >  >>  >>  >>  >>  >
> >  >>  >>  >>  >>  > Check for validity with:
> >  >>  >>  >>  >>  > $ ls $HEADERS
> >  >>  >>  >>  >>  > should show files like:
> >  >>  >>  >>  >>  > arch     include         lib             scripts
> >  >>  >>  >>  >>  > block    init            Makefile        security
> >  >>  >>  >>  >>  > crypto   ipc             mm              sound
> >  >>  >>  >>  >>  > drivers fs       kernel          net             usr
> >  >>  >>  >>  >>  > ----------------
> >  >>  >>  >>  >>  > This definition does not survive a shutdown and must be redone upon reboot,
> >  >>  >>  >>  >>  > when a new driver compiling is necessary.
> >  >>  >>  >>  >>  >
> >  >>  >>  >>  >>  > To compile the driver set, move into the driver folder:
> >  >>  >>  >>  >>  > $ cd alsa-driver-1.0.16
> >  >>  >>  >>  >>  >
> >  >>  >>  >>  >>  > Do the configuration with with the following command on ONE LINE:
> >  >>  >>  >>  >>  > $ ./configure --with-kernel=$HEADERS   --with-build=$HEADERS
> >  >>  >>  >>  >>  > --with-cards=hda-intel
> >  >>  >>  >>  >>  >
> >  >>  >>  >>  >>  > On Fri, Mar 7, 2008 at 1:00 AM, Anita Kuno <ay.kuno@xxxxxxxxx> wrote:
> >  >>  >>  >>  >>  >
> >  >>  >>  >>  >>  >> $ mkdir alsa #worked
> >  >>  >>  >>  >>  >>  $ cd alsa #worked
> >  >>  >>  >>  >>  >>
> >  >>  >>  >>  >>  >> unpack with ( ../  means the next higher folder)
> >  >>  >>  >>  >>  >>  $ tar jxf ../alsa-*.tar.bz2 #had to sudo and unpack one at a time but done
> >  >>  >>  >>  >>  >>
> >  >>  >>  >>  >>  >> which will unpack both packages.  Move into the driver folder
> >  >>  >>  >>  >>  >>  $ cd alsa-driver-1.0.16
> >  >>  >>  >>  >>  >>  Browsen a bit, then do
> >  >>  >>  >>  >>  >>  $  ./configure  --with-cards=hda-intel
> >  >>  >>  >>  >>  >>
> >  >>  >>  >>  >>  >>  Got this far.  The config.log is attached.  It is very big.
> >  >>  >>  >>  >>  >>
> >  >>  >>  >>  >>  >>  Thanks for all the help.
> >  >>  >>  >>  >>  >>
> >  >>  >>  >>  >>  >>
> >  >>  >>  >>  >>  >>
> >  >>  >>  >>  >>  >>  Anita.
> >  >>  >>  >>  >>  >>
> >  >>  >>  >>  >>  >>
> >  >>  >>  >>  >>  >>
> >  >>  >>  >>  >>  >>
> >  >>  >>  >>  >>  >>
> >  >>  >>  >>  >>  >>
> >  >>  >>  >>  >>  >>  Marvin Stodolsky wrote:
> >  >>  >>  >>  >>  >>  > Anita,
> >  >>  >>  >>  >>  >>  >
> >  >>  >>  >>  >>  >>  > RE: If I may be so bold as to collaborate on this effort, I noticed the
> >  >>  >>  >>  >>  >>  > following lines in the logfile:
> >  >>  >>  >>  >>  >>  > <102.812335> open file: /var/lib/slmodem/data.hw:0,6...
> >  >>  >>  >>  >>  >>  > <102.812400> cannot open '/var/lib/slmodem/data.hw:0,6': No such file or
> >  >>  >>  >>  >>  >>  > directory
> >  >>  >>  >>  >>  >>  > -------------
> >  >>  >>  >>  >>  >>  > This is seen also with functioning modems and is not important.
> >  >>  >>  >>  >>  >>  >
> >  >>  >>  >>  >>  >>  > The outstanding problem begins here:
> >  >>  >>  >>  >>  >>  > <124.211995> main: alsa_start...
> >  >>  >>  >>  >>  >>  > error: cannot setup hw params for playback: Invalid argument
> >  >>  >>  >>  >>  >>  > <124.212186> err: hw:0,6: modem start = -22: cannot start device.
> >  >>  >>  >>  >>  >>  > <124.212210> hw:0,6: modem_stop..
> >  >>  >>  >>  >>  >>  >
> >  >>  >>  >>  >>  >>  > All you have done is technically correct.  The next thing to try is
> >  >>  >>  >>  >>  >>  > upgrading snd-hda-intel and its dependent driver set.  Give a first
> >  >>  >>  >>  >>  >>  > read to the example
> >  >>  >>  >>  >>  >>  > http://linmodems.technion.ac.il/archive-seventh/msg00282.html
> >  >>  >>  >>  >>  >>  >
> >  >>  >>  >>  >>  >>  > You will need to download from
> >  >>  >>  >>  >>  >>  > http://www.alsa-project.org/main/index.php/Main_Page
> >  >>  >>  >>  >>  >>  > The packages  alsa-driver-1.0.16 and  alsa-lib-1.0.16
> >  >>  >>  >>  >>  >>  > $ mkdir alsa
> >  >>  >>  >>  >>  >>  > $ cd alsa
> >  >>  >>  >>  >>  >>  > unpack with ( ../  means the next higher folder)
> >  >>  >>  >>  >>  >>  > $ tar jxf ../alsa-*.tar.bz2
> >  >>  >>  >>  >>  >>  > which will unpack both packages.  Move into the driver folder
> >  >>  >>  >>  >>  >>  > $ cd alsa-driver-1.0.16
> >  >>  >>  >>  >>  >>  > Browsen a bit, then do
> >  >>  >>  >>  >>  >>  > $  ./configure  --with-cards=hda-intel
> >  >>  >>  >>  >>  >>  > If the configuration is successful, the driver set will be compiled with:
> >  >>  >>  >>  >>  >>  > $ make
> >  >>  >>  >>  >>  >>  > Get some coffee, this will take a while
> >  >>  >>  >>  >>  >>  > Do nothing in the alsa-lib-1.0.16/  folder.  But it is used during the compile.
> >  >>  >>  >>  >>  >>  >
> >  >>  >>  >>  >>  >>  > The new driver set is displayed by:
> >  >>  >>  >>  >>  >>  > $ ls modules
> >  >>  >>  >>  >>  >>  > and installed by
> >  >>  >>  >>  >>  >>  > $ sudo make install
> >  >>  >>  >>  >>  >>  >
> >  >>  >>  >>  >>  >>  > THen reboot and retest the modem
> >  >>  >>  >>  >>  >>  >
> >  >>  >>  >>  >>  >>  > MarvS
> >  >>  >>  >>  >>  >>  >
> >  >>  >>  >>  >>  >>  >
> >  >>  >>  >>  >>  >>  >
> >  >>  >>  >>  >>  >>  >
> >  >>  >>  >>  >>  >>  > On Thu, Mar 6, 2008 at 10:10 PM, Anita Kuno <ay.kuno@xxxxxxxxx> wrote:
> >  >>  >>  >>  >>  >>  >
> >  >>  >>  >>  >>  >>  >> Some excellent diagnostic questions, thank you.
> >  >>  >>  >>  >>  >>  >>
> >  >>  >>  >>  >>  >>  >>  I am dual booted.  The modem/phone-line combination, that you are
> >  >>  >>  >>  >>  >>  >>  helping to make work with feisty, is the same one that I am using to
> >  >>  >>  >>  >>  >>  >>  communicate with you now.
> >  >>  >>  >>  >>  >>  >>
> >  >>  >>  >>  >>  >>  >>  I am attaching the logfile.  It is wordy.
> >  >>  >>  >>  >>  >>  >>
> >  >>  >>  >>  >>  >>  >>  If I may be so bold as to collaborate on this effort, I noticed the
> >  >>  >>  >>  >>  >>  >>  following lines in the logfile:
> >  >>  >>  >>  >>  >>  >>  <102.812335> open file: /var/lib/slmodem/data.hw:0,6...
> >  >>  >>  >>  >>  >>  >>  <102.812400> cannot open '/var/lib/slmodem/data.hw:0,6': No such file or
> >  >>  >>  >>  >>  >>  >>  directory
> >  >>  >>  >>  >>  >>  >>
> >  >>  >>  >>  >>  >>  >>  So I went looking for /var/lib/slmodem/data.hw:0,6 and I couldn't find it.
> >  >>  >>  >>  >>  >>  >>  anita@anitas-computer:~$ cd /
> >  >>  >>  >>  >>  >>  >>  anita@anitas-computer:/$ cd /var/lib
> >  >>  >>  >>  >>  >>  >>  anita@anitas-computer:/var/lib$ ls
> >  >>  >>  >>  >>  >>  >>  acpi-support   dhcp3                logrotate            synaptic
> >  >>  >>  >>  >>  >>  >>  alsa           dictionaries-common  misc                 ucf
> >  >>  >>  >>  >>  >>  >>  apt            doc-base             mozilla-firefox      update-manager
> >  >>  >>  >>  >>  >>  >>  aptitude       dpkg                 mozilla-thunderbird  update-notifier
> >  >>  >>  >>  >>  >>  >>  aspell         gcj-4.1              NetworkManager       urandom
> >  >>  >>  >>  >>  >>  >>  avahi-autoipd  gconf                python-support       vim
> >  >>  >>  >>  >>  >>  >>  belocs         gdm                  scrollkeeper         x11
> >  >>  >>  >>  >>  >>  >>  binfmts        gstreamer            security             xkb
> >  >>  >>  >>  >>  >>  >>  bittorrent     initramfs-tools      sgml-base            xml-core
> >  >>  >>  >>  >>  >>  >>  dbus           initscripts          slocate
> >  >>  >>  >>  >>  >>  >>  defoma         locales              snmp
> >  >>  >>  >>  >>  >>  >>  anita@anitas-computer:/var/lib$
> >  >>  >>  >>  >>  >>  >>
> >  >>  >>  >>  >>  >>  >>  So what step was supposed to create a directory and file in /var/lib ?
> >  >>  >>  >>  >>  >>  >>  It seems that step did not have the expected result.
> >  >>  >>  >>  >>  >>  >>  Or perhaps I am wrong?
> >  >>  >>  >>  >>  >>  >>
> >  >>  >>  >>  >>  >>  >>  Thanks,
> >  >>  >>  >>  >>  >>  >>
> >  >>  >>  >>  >>  >>  >>
> >  >>  >>  >>  >>  >>  >> Anita.
> >  >>  >>  >>  >>  >>  >>
> >  >>  >>  >>  >>  >>  >>  Marvin Stodolsky wrote:
> >  >>  >>  >>  >>  >>  >>  > Anita,
> >  >>  >>  >>  >>  >>  >>  >   First, can you verify that your phone is Touch Tone dial rather than
> >  >>  >>  >>  >>  >>  >>  > the older PULSE type?
> >  >>  >>  >>  >>  >>  >>  > 2) Make sure an ordinary phone dials out on the line you are using, or
> >  >>  >>  >>  >>  >>  >>  > that the modem works under Microsoft.
> >  >>  >>  >>  >>  >>  >>  >
> >  >>  >>  >>  >>  >>  >>  > 3) use the following setup
> >  >>  >>  >>  >>  >>  >>  > $ sudo slmodemd -c CANADA -a --debug=2 --log hw:0,6
> >  >>  >>  >>  >>  >>  >>  >
> >  >>  >>  >>  >>  >>  >>  > Then in the 2nd console the usual
> >  >>  >>  >>  >>  >>  >>  > $ sudo wvdial
> >  >>  >>  >>  >>  >>  >>  >
> >  >>  >>  >>  >>  >>  >>  > After the failure, send us the generated logfile
> >  >>  >>  >>  >>  >>  >>  >
> >  >>  >>  >>  >>  >>  >>  > MarvS
> >  >>  >>  >>  >>  >>  >>  >
> >  >>  >>  >>  >>  >>  >>  >
> >  >>  >>  >>  >>  >>  >>  > On Thu, Mar 6, 2008 at 9:10 PM, Anita Kuno <ay.kuno@xxxxxxxxx> wrote:
> >  >>  >>  >>  >>  >>  >>  >
> >  >>  >>  >>  >>  >>  >>  >> Thank you for the suggestion, Marvin.
> >  >>  >>  >>  >>  >>  >>  >>
> >  >>  >>  >>  >>  >>  >>  >>  I tried this:
> >  >>  >>  >>  >>  >>  >>  >>
> >  >>  >>  >>  >>  >>  >>  >> [Dialer Defaults]
> >  >>  >>  >>  >>  >>  >>  >>  Init1 = ATZ
> >  >>  >>  >>  >>  >>  >>  >>  Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
> >  >>  >>  >>  >>  >>  >>  >>  Modem Type = Analog Modem
> >  >>  >>  >>  >>  >>  >>  >>  Baud = 460800
> >  >>  >>  >>  >>  >>  >>  >>  Modem = /dev/ttySL0
> >  >>  >>  >>  >>  >>  >>  >>  ISDN = 0
> >  >>  >>  >>  >>  >>  >>  >>  Phone = 7054579564
> >  >>  >>  >>  >>  >>  >>  >>  Password = XXXXXXXX #protected for the purpose of the email
> >  >>  >>  >>  >>  >>  >>  >>  Username = XXXXXXXX #protected for the purpose of the email
> >  >>  >>  >>  >>  >>  >>  >>  Carrier Check = no
> >  >>  >>  >>  >>  >>  >>  >>
> >  >>  >>  >>  >>  >>  >>  >>  And got this:
> >  >>  >>  >>  >>  >>  >>  >>
> >  >>  >>  >>  >>  >>  >>  >> anita@anitas-computer:~$ sudo wvdial
> >  >>  >>  >>  >>  >>  >>  >>
> >  >>  >>  >>  >>  >>  >>  >> --> WvDial: Internet dialer version 1.56
> >  >>  >>  >>  >>  >>  >>  >>  --> Cannot get information for serial port.
> >  >>  >>  >>  >>  >>  >>  >>  --> Initializing modem.
> >  >>  >>  >>  >>  >>  >>  >>  --> Sending: ATZ
> >  >>  >>  >>  >>  >>  >>  >>  ATZ
> >  >>  >>  >>  >>  >>  >>  >>  OK
> >  >>  >>  >>  >>  >>  >>  >>  --> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
> >  >>  >>  >>  >>  >>  >>  >>  ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
> >  >>  >>  >>  >>  >>  >>  >>  OK
> >  >>  >>  >>  >>  >>  >>  >>  --> Modem initialized.
> >  >>  >>  >>  >>  >>  >>  >>  --> Sending: ATDT7054579564
> >  >>  >>  >>  >>  >>  >>  >>  --> Waiting for carrier.
> >  >>  >>  >>  >>  >>  >>  >>  ATDT7054579564
> >  >>  >>  >>  >>  >>  >>  >>  NO CARRIER
> >  >>  >>  >>  >>  >>  >>  >>  ERROR
> >  >>  >>  >>  >>  >>  >>  >>
> >  >>  >>  >>  >>  >>  >>  >>  So then I tried this:
> >  >>  >>  >>  >>  >>  >>  >>
> >  >>  >>  >>  >>  >>  >>  >> [Dialer Defaults]
> >  >>  >>  >>  >>  >>  >>  >>  Init1 = ATZ
> >  >>  >>  >>  >>  >>  >>  >>  Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
> >  >>  >>  >>  >>  >>  >>  >>  Modem Type = Analog Modem
> >  >>  >>  >>  >>  >>  >>  >>  Baud = 460800
> >  >>  >>  >>  >>  >>  >>  >>  Modem = /dev/ttySL0
> >  >>  >>  >>  >>  >>  >>  >>  ISDN = 0
> >  >>  >>  >>  >>  >>  >>  >>  Phone = 7054579564
> >  >>  >>  >>  >>  >>  >>  >>  Password = XXXXXXXX
> >  >>  >>  >>  >>  >>  >>  >>  Username = XXXXXXXX@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx #this
> >  >>  >>  >>  >>  >>  >>  >>  information I obtained by logging into irc and evaluating my personal
> >  >>  >>  >>  >>  >>  >>  >>  information.  Thought I would give it a try.
> >  >>  >>  >>  >>  >>  >>  >>  Carrier Check = no
> >  >>  >>  >>  >>  >>  >>  >>
> >  >>  >>  >>  >>  >>  >>  >>  And I got this:
> >  >>  >>  >>  >>  >>  >>  >>
> >  >>  >>  >>  >>  >>  >>  >> anita@anitas-computer:~$ sudo wvdial
> >  >>  >>  >>  >>  >>  >>  >>
> >  >>  >>  >>  >>  >>  >>  >> --> WvDial: Internet dialer version 1.56
> >  >>  >>  >>  >>  >>  >>  >>  --> Cannot get information for serial port.
> >  >>  >>  >>  >>  >>  >>  >>  --> Initializing modem.
> >  >>  >>  >>  >>  >>  >>  >>  --> Sending: ATZ
> >  >>  >>  >>  >>  >>  >>  >>  ATZ
> >  >>  >>  >>  >>  >>  >>  >>  OK
> >  >>  >>  >>  >>  >>  >>  >>  --> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
> >  >>  >>  >>  >>  >>  >>  >>  ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
> >  >>  >>  >>  >>  >>  >>  >>  OK
> >  >>  >>  >>  >>  >>  >>  >>  --> Modem initialized.
> >  >>  >>  >>  >>  >>  >>  >>  --> Sending: ATDT7054579564
> >  >>  >>  >>  >>  >>  >>  >>  --> Waiting for carrier.
> >  >>  >>  >>  >>  >>  >>  >>  ATDT7054579564
> >  >>  >>  >>  >>  >>  >>  >>  NO CARRIER
> >  >>  >>  >>  >>  >>  >>  >>  ERROR
> >  >>  >>  >>  >>  >>  >>  >>
> >  >>  >>  >>  >>  >>  >>  >>  What should I try next?
> >  >>  >>  >>  >>  >>  >>  >>
> >  >>  >>  >>  >>  >>  >>  >>  Thank you,
> >  >>  >>  >>  >>  >>  >>  >>  Anita.
> >  >>  >>  >>  >>  >>  >>  >>
> >  >>  >>  >>  >>  >>  >>  >>
> >  >>  >>  >>  >>  >>  >>  >>
> >  >>  >>  >>  >>  >>  >>  >>
> >  >>  >>  >>  >>  >>  >>  >>
> >  >>  >>  >>  >>  >>  >>  >>  Marvin Stodolsky wrote:
> >  >>  >>  >>  >>  >>  >>  >>  > Anita,
> >  >>  >>  >>  >>  >>  >>  >>  >    Add a line to /etc/wvdial.conf
> >  >>  >>  >>  >>  >>  >>  >>  > Carrier Check  =  no
> >  >>  >>  >>  >>  >>  >>  >>  > and then retest as before.  This line is necessary, because /dev/pts/N
> >  >>  >>  >>  >>  >>  >>  >>  > ports do not yet have "sound hearing" capability and hence cannot hear
> >  >>  >>  >>  >>  >>  >>  >>  > the Carrier signal.
> >  >>  >>  >>  >>  >>  >>  >>  >
> >  >>  >>  >>  >>  >>  >>  >>  > MarvS
> >  >>  >>  >>  >>  >>  >>  >>  >
> >  >>  >>  >>  >>  >>  >>  >>  > On Thu, Mar 6, 2008 at 4:33 PM, Anita Kuno <ay.kuno@xxxxxxxxx> wrote:
> >  >>  >>  >>  >>  >>  >>  >>  >
> >  >>  >>  >>  >>  >>  >>  >>  >> Thank you, Jacques, I did figure out that my problem from my last post
> >  >>  >>  >>  >>  >>  >>  >>  >>  was that I had not configured the file by calling wvdialconf.  Thank you
> >  >>  >>  >>  >>  >>  >>  >>  >>  for your clarity.
> >  >>  >>  >>  >>  >>  >>  >>  >>
> >  >>  >>  >>  >>  >>  >>  >>  >>  So after running wvdialconf, I configured the file as follows:
> >  >>  >>  >>  >>  >>  >>  >>  >>
> >  >>  >>  >>  >>  >>  >>  >>  >> [Dialer Defaults]
> >  >>  >>  >>  >>  >>  >>  >>  >>  Init1 = ATZ
> >  >>  >>  >>  >>  >>  >>  >>  >>  Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
> >  >>  >>  >>  >>  >>  >>  >>  >>  Modem Type = Analog Modem
> >  >>  >>  >>  >>  >>  >>  >>  >>  Baud = 460800
> >  >>  >>  >>  >>  >>  >>  >>  >>
> >  >>  >>  >>  >>  >>  >>  >>  >> Modem = /dev/ttySL0
> >  >>  >>  >>  >>  >>  >>  >>  >>  ISDN = 0
> >  >>  >>  >>  >>  >>  >>  >>  >>  Phone = 7054579564
> >  >>  >>  >>  >>  >>  >>  >>  >>  Password = XXXXXXXX #hidden for the purpose of this email
> >  >>  >>  >>  >>  >>  >>  >>  >>  Username = XXXXXXXX #hidden for the purpose of this email
> >  >>  >>  >>  >>  >>  >>  >>  >>
> >  >>  >>  >>  >>  >>  >>  >>  >>  And ran sudo wvdial:
> >  >>  >>  >>  >>  >>  >>  >>  >>  $ sudo wvdial
> >  >>  >>  >>  >>  >>  >>  >>  >>
> >  >>  >>  >>  >>  >>  >>  >>  >> --> WvDial: Internet dialer version 1.56
> >  >>  >>  >>  >>  >>  >>  >>  >>  --> Cannot get information for serial port.
> >  >>  >>  >>  >>  >>  >>  >>  >>  --> Initializing modem.
> >  >>  >>  >>  >>  >>  >>  >>  >>  --> Sending: ATZ
> >  >>  >>  >>  >>  >>  >>  >>  >>  ATZ
> >  >>  >>  >>  >>  >>  >>  >>  >>  OK
> >  >>  >>  >>  >>  >>  >>  >>  >>  --> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
> >  >>  >>  >>  >>  >>  >>  >>  >>
> >  >>  >>  >>  >>  >>  >>  >>  >> ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
> >  >>  >>  >>  >>  >>  >>  >>  >>  OK
> >  >>  >>  >>  >>  >>  >>  >>  >>  --> Modem initialized.
> >  >>  >>  >>  >>  >>  >>  >>  >>  --> Sending: ATDT7054579564
> >  >>  >>  >>  >>  >>  >>  >>  >>  --> Waiting for carrier.
> >  >>  >>  >>  >>  >>  >>  >>  >>  ATDT7054579564
> >  >>  >>  >>  >>  >>  >>  >>  >>  NO CARRIER
> >  >>  >>  >>  >>  >>  >>  >>  >>  ERROR
> >  >>  >>  >>  >>  >>  >>  >>  >>  --> No Carrier!  Trying again.
> >  >>  >>  >>  >>  >>  >>  >>  >>  --> Sending: ATDT7054579564
> >  >>  >>  >>  >>  >>  >>  >>  >>  --> Waiting for carrier.
> >  >>  >>  >>  >>  >>  >>  >>  >>  ATDT7054579564
> >  >>  >>  >>  >>  >>  >>  >>  >>  NO CARRIER
> >  >>  >>  >>  >>  >>  >>  >>  >>
> >  >>  >>  >>  >>  >>  >>  >>  >>  So, NO CARRIER.  What is it looking for and how do I give it what it wants?
> >  >>  >>  >>  >>  >>  >>  >>  >>
> >  >>  >>  >>  >>  >>  >>  >>  >>
> >  >>  >>  >>  >>  >>  >>  >>  >>  Thanks,
> >  >>  >>  >>  >>  >>  >>  >>  >>  Anita.
> >  >>  >>  >>  >>  >>  >>  >>  >>
> >  >>  >>  >>  >>  >>  >>  >>  >>
> >  >>  >>  >>  >>  >>  >>  >>  >>  Jacques Goldberg wrote:
> >  >>  >>  >>  >>  >>  >>  >>  >>  > Again
> >  >>  >>  >>  >>  >>  >>  >>  >>  >
> >  >>  >>  >>  >>  >>  >>  >>  >>  > 1-In one window,   sudo slmodemd etc...
> >  >>  >>  >>  >>  >>  >>  >>  >>  > 2-In an other window,    sudo wvdialconf /etc/wvdial.conf
> >  >>  >>  >>  >>  >>  >>  >>  >>  >   Instead, you did  sudo wvdial /etc/wvdial.conf
> >  >>  >>  >>  >>  >>  >>  >>  >>  > but wvdialconf and wvdial are NOT the same thing. These are two
> >  >>  >>  >>  >>  >>  >>  >>  >>  > DIFFERENT commands. One configures the modem once for all, the other,
> >  >>  >>  >>  >>  >>  >>  >>  >>  > wvdial , makes the connection
> >  >>  >>  >>  >>  >>  >>  >>  >>  >
> >  >>  >>  >>  >>  >>  >>  >>  >>  > You must run wvdialconf as shown, at least ONCE, while slmodemd IS
> >  >>  >>  >>  >>  >>  >>  >>  >>  > running
> >  >>  >>  >>  >>  >>  >>  >>  >>  > wvdialconf will find your modem
> >  >>  >>  >>  >>  >>  >>  >>  >>  > Edit the file /etc/wvdial.conf  (username, password, phone . Remove
> >  >>  >>  >>  >>  >>  >>  >>  >>  > leading ; and < > containers and replace parameter in container by
> >  >>  >>  >>  >>  >>  >>  >>  >>  > value given to you by your ISP )
> >  >>  >>  >>  >>  >>  >>  >>  >>  >
> >  >>  >>  >>  >>  >>  >>  >>  >>  > Only NOW can you try, as many times as you like  sudo wvdial
> >  >>  >>  >>  >>  >>  >>  >>  >>  > and note, NOT sudo wvdial /etc/wvdial.conf  , just sudo wvdial
> >  >>  >>  >>  >>  >>  >>  >>  >>  > wvdial  knows that it has to use /etc/wvdial.conf
> >  >>  >>  >>  >>  >>  >>  >>  >>  >
> >  >>  >>  >>  >>  >>  >>  >>  >>  > And just to make sure:  slmodemd MUST also be running while you try
> >  >>  >>  >>  >>  >>  >>  >>  >>  > wvdial
> >  >>  >>  >>  >>  >>  >>  >>  >>
> >  >>  >>  >>  >>  >>  >>  >>  >>
> >  >>  >>  >>  >>  >>  >>  >>  >>
> >  >>  >>  >>  >>  >>  >>  >>  >>  > Jacques
> >  >>  >>  >>  >>  >>  >>  >>  >>  >
> >  >>  >>  >>  >>  >>  >>  >>  >>  > Anita Kuno wrote:
> >  >>  >>  >>  >>  >>  >>  >>  >>  >> Thank you, Jacques, you are entirely correct.  I do not understand
> >  >>  >>  >>  >>  >>  >>  >>  >>  >> the procedure.
> >  >>  >>  >>  >>  >>  >>  >>  >>  >>
> >  >>  >>  >>  >>  >>  >>  >>  >>  >> However, when I sent
> >  >>  >>  >>  >>  >>  >>  >>  >>  >> Results from second terminal with first terminal running slmodemd:
> >  >>  >>  >>  >>  >>  >>  >>  >>  >> that was my way of saying that I had done the first step as you
> >  >>  >>  >>  >>  >>  >>  >>  >>  >> outlined:
> >  >>  >>  >>  >>  >>  >>  >>  >>  >> 1-In one window, you start slmodemd and DO NOT STOP IT
> >  >>  >>  >>  >>  >>  >>  >>  >>  >>
> >  >>  >>  >>  >>  >>  >>  >>  >>  >> And when I also submitted:
> >  >>  >>  >>  >>  >>  >>  >>  >>  >> anita@anitas-computer:~$ sudo wvdial /etc/wvdial.conf
> >  >>  >>  >>  >>  >>  >>  >>  >>  >> Password:
> >  >>  >>  >>  >>  >>  >>  >>  >>  >> --> WvDial: Internet dialer version 1.56
> >  >>  >>  >>  >>  >>  >>  >>  >>  >> --> Warning: section [Dialer /etc/wvdial.conf] does not exist in
> >  >>  >>  >>  >>  >>  >>  >>  >>  >> wvdial.conf.
> >  >>  >>  >>  >>  >>  >>  >>  >>  >> --> Cannot open /dev/modem: No such file or directory
> >  >>  >>  >>  >>  >>  >>  >>  >>  >> --> Cannot open /dev/modem: No such file or directory
> >  >>  >>  >>  >>  >>  >>  >>  >>  >> --> Cannot open /dev/modem: No such file or directory
> >  >>  >>  >>  >>  >>  >>  >>  >>  >>
> >  >>  >>  >>  >>  >>  >>  >>  >>  >> That was my way of demonstrating that I had:
> >  >>  >>  >>  >>  >>  >>  >>  >>  >> 2-In an other window you start
> >  >>  >>  >>  >>  >>  >>  >>  >>  >> sudo wvdialconf /etc/wvdial./.conf
> >  >>  >>  >>  >>  >>  >>  >>  >>  >>
> >  >>  >>  >>  >>  >>  >>  >>  >>  >> And I was hoping for:
> >  >>  >>  >>  >>  >>  >>  >>  >>  >> which should find your modem
> >  >>  >>  >>  >>  >>  >>  >>  >>  >>
> >  >>  >>  >>  >>  >>  >>  >>  >>  >> And perhaps I mis-interpreted the result, but when I read:
> >  >>  >>  >>  >>  >>  >>  >>  >>  >> --> Warning: section [Dialer /etc/wvdial.conf] does not exist in
> >  >>  >>  >>  >>  >>  >>  >>  >>  >> wvdial.conf.
> >  >>  >>  >>  >>  >>  >>  >>  >>  >> --> Cannot open /dev/modem: No such file or directory
> >  >>  >>  >>  >>  >>  >>  >>  >>  >> --> Cannot open /dev/modem: No such file or directory
> >  >>  >>  >>  >>  >>  >>  >>  >>  >> --> Cannot open /dev/modem: No such file or directory
> >  >>  >>  >>  >>  >>  >>  >>  >>  >> I took that to mean that it couldn't find the modem.
> >  >>  >>  >>  >>  >>  >>  >>  >>  >>
> >  >>  >>  >>  >>  >>  >>  >>  >>  >> So I am wondering how to find the modem.
> >  >>  >>  >>  >>  >>  >>  >>  >>  >>
> >  >>  >>  >>  >>  >>  >>  >>  >>  >> Thanks,
> >  >>  >>  >>  >>  >>  >>  >>  >>  >> Anita.
> >  >>  >>  >>  >>  >>  >>  >>  >>  >>
> >  >>  >>  >>  >>  >>  >>  >>  >>  >>
> >  >>  >>  >>  >>  >>  >>  >>  >>  >>
> >  >>  >>  >>  >>  >>  >>  >>  >>  >>
> >  >>  >>  >>  >>  >>  >>  >>  >>  >> Jacques Goldberg wrote:
> >  >>  >>  >>  >>  >>  >>  >>  >>  >>> I believe that you do not understand the procedure
> >  >>  >>  >>  >>  >>  >>  >>  >>  >>>
> >  >>  >>  >>  >>  >>  >>  >>  >>  >>> 1-In one window, you start slmodemd and DO NOT STOP IT
> >  >>  >>  >>  >>  >>  >>  >>  >>  >>> 2-In an other window you start
> >  >>  >>  >>  >>  >>  >>  >>  >>  >>> sudo wvdialconf /etc/wvdial./.conf
> >  >>  >>  >>  >>  >>  >>  >>  >>  >>> which should find your modem
> >  >>  >>  >>  >>  >>  >>  >>  >>  >>> When wvdialconf exits and has found a modem, you EDIT
> >  >>  >>  >>  >>  >>  >>  >>  >>  >>> the file /etc/wvdial.conf to set username, password, phone
> >  >>  >>  >>  >>  >>  >>  >>  >>  >>> as in
> >  >>  >>  >>  >>  >>  >>  >>  >>  >>> username = tartempion
> >  >>  >>  >>  >>  >>  >>  >>  >>  >>> phone = 0123456788
> >  >>  >>  >>  >>  >>  >>  >>  >>  >>> password = sunday_times
> >  >>  >>  >>  >>  >>  >>  >>  >>  >>> After editing, you start wvdial as
> >  >>  >>  >>  >>  >>  >>  >>  >>  >>> sudo wvdial
> >  >>  >>  >>  >>  >>  >>  >>  >>  >>> and you do NOT stop wvdial until you want to close the phone call.
> >  >>  >>  >>  >>  >>  >>  >>  >>  >>> You cannot use these two windows for anything else until you have
> >  >>  >>  >>  >>  >>  >>  >>  >>  >>> ended wvdial and slmodemd
> >  >>  >>  >>  >>  >>  >>  >>  >>  >>>
> >  >>  >>  >>  >>  >>  >>  >>  >>  >>> Jacques
> >  >>  >>  >>  >>  >>  >>  >>  >>  >>>
> >  >>  >>  >>  >>  >>  >>  >>  >>  >>> Anita Kuno wrote:
> >  >>  >>  >>  >>  >>  >>  >>  >>  >>>> Thank you Marvin and Antonio,
> >  >>  >>  >>  >>  >>  >>  >>  >>  >>>>
> >  >>  >>  >>  >>  >>  >>  >>  >>  >>>> Results from second terminal with first terminal running slmodemd:
> >  >>  >>  >>  >>  >>  >>  >>  >>  >>>>
> >  >>  >>  >>  >>  >>  >>  >>  >>  >>>> anita@anitas-computer:~$ sudo wvdial /etc/wvdial.conf
> >  >>  >>  >>  >>  >>  >>  >>  >>  >>>> Password:
> >  >>  >>  >>  >>  >>  >>  >>  >>  >>>> --> WvDial: Internet dialer version 1.56
> >  >>  >>  >>  >>  >>  >>  >>  >>  >>>> --> Warning: section [Dialer /etc/wvdial.conf] does not exist in
> >  >>  >>  >>  >>  >>  >>  >>  >>  >>>> wvdial.conf.
> >  >>  >>  >>  >>  >>  >>  >>  >>  >>>> --> Cannot open /dev/modem: No such file or directory
> >  >>  >>  >>  >>  >>  >>  >>  >>  >>>> --> Cannot open /dev/modem: No such file or directory
> >  >>  >>  >>  >>  >>  >>  >>  >>  >>>> --> Cannot open /dev/modem: No such file or directory
> >  >>  >>  >>  >>  >>  >>  >>  >>  >>>> anita@anitas-computer:~$
> >  >>  >>  >>  >>  >>  >>  >>  >>  >>>>
> >  >>  >>  >>  >>  >>  >>  >>  >>  >>>>
> >  >>  >>  >>  >>  >>  >>  >>  >>  >>>> Marvin Stodolsky wrote:
> >  >>  >>  >>  >>  >>  >>  >>  >>  >>>>> Anita,
> >  >>  >>  >>  >>  >>  >>  >>  >>  >>>>>
> >  >>  >>  >>  >>  >>  >>  >>  >>  >>>>>    Just to clarify on Antonio's terse comment.
> >  >>  >>  >>  >>  >>  >>  >>  >>  >>>>> After the successful:
> >  >>  >>  >>  >>  >>  >>  >>  >>  >>>>> $ sudo slmodemd -c CANADA --alsa hw:0,6
> >  >>  >>  >>  >>  >>  >>  >>  >>  >>>>> leave slmodemd running.
> >  >>  >>  >>  >>  >>  >>  >>  >>  >>>>> Open a 2nd console or new TAB on the same one and run the
> >  >>  >>  >>  >>  >>  >>  >>  >>  >>>>> $ sudo wvdialconf  /etc/wvdial.conf
> >  >>  >>  >>  >>  >>  >>  >>  >>  >>>>>   If this step succeeds:
> >  >>  >>  >>  >>  >>  >>  >>  >>  >>>>> $ sudo gedit /etc/wvdial.conf
> >  >>  >>  >>  >>  >>  >>  >>  >>  >>>>> and edit to a format like that below.
> >  >>  >>  >>  >>  >>  >>  >>  >>  >>>>>
> >  >>  >>  >>  >>  >>  >>  >>  >>  >>>>> Afterward with slmodemd still running, try a dialout with:
> >  >>  >>  >>  >>  >>  >>  >>  >>  >>>>> $ sudo wvdial
> >  >>  >>  >>  >>  >>  >>  >>  >>  >>>>>
> >  >>  >>  >>  >>  >>  >>  >>  >>  >>>>> Please report back to the List, not to me directly:
> >  >>  >>  >>  >>  >>  >>  >>  >>  >>>>>
> >  >>  >>  >>  >>  >>  >>  >>  >>  >>>>> MarvS
> >  >>  >>  >>  >>  >>  >>  >>  >>  >>>>> -----------------
> >  >>  >>  >>  >>  >>  >>  >>  >>  >>>>> [Dialer Defaults]
> >  >>  >>  >>  >>  >>  >>  >>  >>  >>>>> Init1 = ATZ
> >  >>  >>  >>  >>  >>  >>  >>  >>  >>>>> Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
> >  >>  >>  >>  >>  >>  >>  >>  >>  >>>>> Modem Type = Analog Modem
> >  >>  >>  >>  >>  >>  >>  >>  >>  >>>>> Baud = 460800
> >  >>  >>  >>  >>  >>  >>  >>  >>  >>>>> New PPPD = yes
> >  >>  >>  >>  >>  >>  >>  >>  >>  >>>>> Modem = /dev/ttySL0
> >  >>  >>  >>  >>  >>  >>  >>  >>  >>>>> ISDN = 0
> >  >>  >>  >>  >>  >>  >>  >>  >>  >>>>> Password = YourPassword
> >  >>  >>  >>  >>  >>  >>  >>  >>  >>>>> Username = LoginName@xxxxxxxxxxxxxxxx
> >  >>  >>  >>  >>  >>  >>  >>  >>  >>>>> Phone = 3015560020
> >  >>  >>  >>  >>  >>  >>  >>  >>  >>>>> # needed for usage with  /dev/pts/N  ports:
> >  >>  >>  >>  >>  >>  >>  >>  >>  >>>>> Carrier Check = no
> >  >>  >>  >>  >>  >>  >>  >>  >>  >>>>>
> >  >>  >>  >>  >>  >>  >>  >>  >>  >>>>>
> >  >>  >>  >>  >>  >>  >>  >>  >>  >>>>>
> >  >>  >>  >>  >>  >>  >>  >>  >>  >>>>>
> >  >>  >>  >>  >>  >>  >>  >>  >>  >>>>> On Wed, Mar 5, 2008 at 7:38 PM, Antonio Olivares
> >  >>  >>  >>  >>  >>  >>  >>  >>  >>>>> <olivares14031@xxxxxxxxx> wrote:
> >  >>  >>  >>  >>  >>  >>  >>  >>  >>>>>
> >  >>  >>  >>  >>  >>  >>  >>  >>  >>>>>> When you did this
> >  >>  >>  >>  >>  >>  >>  >>  >>  >>>>>>
> >  >>  >>  >>  >>  >>  >>  >>  >>  >>>>>>
> >  >>  >>  >>  >>  >>  >>  >>  >>  >>>>>>  $ sudo slmodemd -c CANADA --alsa hw:0,6
> >  >>  >>  >>  >>  >>  >>  >>  >>  >>>>>>   => SmartLink Soft Modem: version 2.9.11 Feb 17 2008 09:31:10
> >  >>  >>  >>  >>  >>  >>  >>  >>  >>>>>>   => symbolic link `/dev/ttySL0' -> `/dev/pts/1' created.
> >  >>  >>  >>  >>  >>  >>  >>  >>  >>>>>>   => modem `hw:0,6' created. TTY is `/dev/pts/1'
> >  >>  >>  >>  >>  >>  >>  >>  >>  >>>>>>   =>Use `/dev/ttySL0' as modem device, Ctrl+C for termination.
> >  >>  >>  >>  >>  >>  >>  >>  >>  >>>>>>
> >  >>  >>  >>  >>  >>  >>  >>  >>  >>>>>>  Did you CTRL+C to do sudo wvdialconf /etc/wvdial.conf ?
> >  >>  >>  >>  >>  >>  >>  >>  >>  >>>>>>
> >  >>  >>  >>  >>  >>  >>  >>  >>  >>>>>>  open up another terminal or session and then type
> >  >>  >>  >>  >>  >>  >>  >>  >>  >>>>>>
> >  >>  >>  >>  >>  >>  >>  >>  >>  >>>>>>
> >  >>  >>  >>  >>  >>  >>  >>  >>  >>>>>>  $ sudo wvdialconf /etc/wvdial.conf
> >  >>  >>  >>  >>  >>  >>  >>  >>  >>>>>>
> >  >>  >>  >>  >>  >>  >>  >>  >>  >>>>>>  That should find your modem, and get you setup.  Please report
> >  >>  >>  >>  >>  >>  >>  >>  >>  >>>>>> back if
> >  >>  >>  >>  >>  >>  >>  >>  >>  >>>>>>  you have trouble/questions.
> >  >>  >>  >>  >>  >>  >>  >>  >>  >>>>>>
> >  >>  >>  >>  >>  >>  >>  >>  >>  >>>>>>  Regards,
> >  >>  >>  >>  >>  >>  >>  >>  >>  >>>>>>
> >  >>  >>  >>  >>  >>  >>  >>  >>  >>>>>>  Antonio
> >  >>  >>  >>  >>  >>  >>  >>  >>  >>>>>>
> >  >>  >>  >>  >>  >>  >>  >>  >>  >>>>>>
> >  >>  >>  >>  >>  >>  >>  >>  >>  >>>>>>
> >  >>  >>  >>  >>  >>  >>  >>  >>  >>>>>>  On 3/5/08, Anita Kuno <ay.kuno@xxxxxxxxx> wrote:
> >  >>  >>  >>  >>  >>  >>  >>  >>  >>>>>>  > I have unpacked SLMODEMD:
> >  >>  >>  >>  >>  >>  >>  >>  >>  >>>>>>  > $ tar -zxvf ./SLMODEMD.gcc4.1.tar.gz
> >  >>  >>  >>  >>  >>  >>  >>  >>  >>>>>>  >
> >  >>  >>  >>  >>  >>  >>  >>  >>  >>>>>>  > And I believe this makes SLMODEMD an executable file:
> >  >>  >>  >>  >>  >>  >>  >>  >>  >>>>>>  > $ chmod +x slmodemd
> >  >>  >>  >>  >>  >>  >>  >>  >>  >>>>>>  > $ sudo cp slmodemd /usr/sbin
> >  >>  >>  >>  >>  >>  >>  >>  >>  >>>>>>  >
> >  >>  >>  >>  >>  >>  >>  >>  >>  >>>>>>  > And I think this verifies the location:
> >  >>  >>  >>  >>  >>  >>  >>  >>  >>>>>>  > $ find /usr -name slmodemd
> >  >>  >>  >>  >>  >>  >>  >>  >>  >>>>>>  > => /usr/sbin/slmodemd
> >  >>  >>  >>  >>  >>  >>  >>  >>  >>>>>>  >
> >  >>  >>  >>  >>  >>  >>  >>  >>  >>>>>>  > So then I installed SLMODEMD:
> >  >>  >>  >>  >>  >>  >>  >>  >>  >>>>>>  > $ sudo slmodemd -c CANADA --alsa hw:0,6
> >  >>  >>  >>  >>  >>  >>  >>  >>  >>>>>>  > => SmartLink Soft Modem: version 2.9.11 Feb 17 2008 09:31:10
> >  >>  >>  >>  >>  >>  >>  >>  >>  >>>>>>  > => symbolic link `/dev/ttySL0' -> `/dev/pts/1' created.
> >  >>  >>  >>  >>  >>  >>  >>  >>  >>>>>>  > => modem `hw:0,6' created. TTY is `/dev/pts/1'
> >  >>  >>  >>  >>  >>  >>  >>  >>  >>>>>>  > =>Use `/dev/ttySL0' as modem device, Ctrl+C for termination.
> >  >>  >>  >>  >>  >>  >>  >>  >>  >>>>>>  >
> >  >>  >>  >>  >>  >>  >>  >>  >>  >>>>>>  > So then I worked on wvdial.
> >  >>  >>  >>  >>  >>  >>  >>  >>  >>>>>>  > $ which wvdial
> >  >>  >>  >>  >>  >>  >>  >>  >>  >>>>>>  > => /usr/bin/wvdial
> >  >>  >>  >>  >>  >>  >>  >>  >>  >>>>>>  > $ sudo wvdialconf /etc/wvdial.conf
> >  >>  >>  >>  >>  >>  >>  >>  >>  >>>>>>  > =>Editing `/etc/wvdial.conf'.
> >  >>  >>  >>  >>  >>  >>  >>  >>  >>>>>>  > => Scanning your serial ports for a modem.
> >  >>  >>  >>  >>  >>  >>  >>  >>  >>>>>>  > => Modem Port Scan<*1>: S0   S1   S2   S3
> >  >>  >>  >>  >>  >>  >>  >>  >>  >>>>>>  > => Sorry, no modem was detected!  Is it in use by another
> >  >>  >>  >>  >>  >>  >>  >>  >>  >>>>>> program?
> >  >>  >>  >>  >>  >>  >>  >>  >>  >>>>>>  > => Did you configure it properly with setserial?
> >  >>  >>  >>  >>  >>  >>  >>  >>  >>>>>>  > => Please read the FAQ at http://open.nit.ca/wiki/?WvDial
> >  >>  >>  >>  >>  >>  >>  >>  >>  >>>>>>  > => If you still have problems, send mail to
> >  >>  >>  >>  >>  >>  >>  >>  >>  >>>>>> <wvdial-list@xxxxxxxxxxxx>.
> >  >>  >>  >>  >>  >>  >>  >>  >>  >>>>>>  >
> >  >>  >>  >>  >>  >>  >>  >>  >>  >>>>>>  > I have tried the url to find the FAQ, can't find it.
> >  >>  >>  >>  >>  >>  >>  >>  >>  >>>>>>  > And I have emailed them to ask for the FAQ url, no response.
> >  >>  >>  >>  >>  >>  >>  >>  >>  >>>>>>  >
> >  >>  >>  >>  >>  >>  >>  >>  >>  >>>>>>  > So I have evaluated the sound card:
> >  >>  >>  >>  >>  >>  >>  >>  >>  >>>>>>  > $ cat /proc/asound/cards
> >  >>  >>  >>  >>  >>  >>  >>  >>  >>>>>>  > =>  0 [Intel          ]: HDA-Intel - HDA Intel
> >  >>  >>  >>  >>  >>  >>  >>  >>  >>>>>>  > =>                       HDA Intel at 0xd8240000 irq 21
> >  >>  >>  >>  >>  >>  >>  >>  >>  >>>>>>  >
> >  >>  >>  >>  >>  >>  >>  >>  >>  >>>>>>  > And run uname:
> >  >>  >>  >>  >>  >>  >>  >>  >>  >>>>>>  > $ uname -a
> >  >>  >>  >>  >>  >>  >>  >>  >>  >>>>>>  > Linux anitas-computer 2.6.20-15-generic #2 SMP Sun Apr 15
> >  >>  >>  >>  >>  >>  >>  >>  >>  >>>>>> 07:36:31 UTC
> >  >>  >>  >>  >>  >>  >>  >>  >>  >>>>>>  > 2007 i686 GNU/Linux
> >  >>  >>  >>  >>  >>  >>  >>  >>  >>>>>>  >
> >  >>  >>  >>  >>  >>  >>  >>  >>  >>>>>>  > And confirmed module-init-tools:
> >  >>  >>  >>  >>  >>  >>  >>  >>  >>>>>>  > $ dpkg -s module-init-tools
> >  >>  >>  >>  >>  >>  >>  >>  >>  >>>>>>  > => Package: module-init-tools
> >  >>  >>  >>  >>  >>  >>  >>  >>  >>>>>>  > => Status: install ok installed
> >  >>  >>  >>  >>  >>  >>  >>  >>  >>>>>>  >
> >  >>  >>  >>  >>  >>  >>  >>  >>  >>>>>>  > What is my next step?
> >  >>  >>  >>  >>  >>  >>  >>  >>  >>>>>>  >
> >  >>  >>  >>  >>  >>  >>  >>  >>  >>>>>>  > Thank you,
> >  >>  >>  >>  >>  >>  >>  >>  >>  >>>>>>  > Anita.
> >  >>  >>  >>  >>  >>  >>  >>  >>  >>>>>>  >
> >  >>  >>  >>  >>  >>  >>  >>  >>  >>>>>>  >
> >  >>  >>  >>  >>  >>  >>  >>  >>  >>>>>>  >
> >  >>  >>  >>  >>  >>  >>  >>  >>  >>>>>>  >
> >  >>  >>  >>  >>  >>  >>  >>  >>  >>>>>>  >
> >  >>  >>  >>  >>  >>  >>  >>  >>  >>>>>>
> >  >>  >>  >>  >>  >>  >>  >>  >>  >>>>>>
> >  >>  >>  >>  >>  >>  >>  >>  >>  >>>>>
> >  >>  >>  >>  >>  >>  >>  >>  >>  >>>>>
> >  >>  >>  >>  >>  >>  >>  >>  >>  >>>>
> >  >>  >>  >>  >>  >>  >>  >>  >>  >>>
> >  >>  >>  >>  >>  >>  >>  >>  >>  >>
> >  >>  >>  >>  >>  >>  >>  >>  >>  >
> >  >>  >>  >>  >>  >>  >>  >>  >>
> >  >>  >>  >>  >>  >>  >>  >>  >>
> >  >>  >>  >>  >>  >>  >>  >>  >>
> >  >>  >>  >>  >>  >>  >>  >>  >
> >  >>  >>  >>  >>  >>  >>  >>  >
> >  >>  >>  >>  >>  >>  >>  >>
> >  >>  >>  >>  >>  >>  >>  >>
> >  >>  >>  >>  >>  >>  >>  >>
> >  >>  >>  >>  >>  >>  >>  >
> >  >>  >>  >>  >>  >>  >>  >
> >  >>  >>  >>  >>  >>  >>
> >  >>  >>  >>  >>  >>  >>
> >  >>  >>  >>  >>  >>  >> anita@anitas-computer:~$ sudo slmodemd -c CANADA -a --debug=2 --log hw:0,6
> >  >>  >>  >>  >>  >>  >>  Password:
> >  >>  >>  >>  >>  >>  >>  SmartLink Soft Modem: version 2.9.11 Feb 17 2008 09:31:10
> >  >>  >>  >>  >>  >>  >>  <102.811403> SmartLink Soft Modem: version 2.9.11 Feb 17 2008 09:31:10
> >  >>  >>  >>  >>  >>  >>  <102.811493> hw:0,6: startup modem...
> >  >>  >>  >>  >>  >>  >>  <102.811607> hw:0,6: update termios...
> >  >>  >>  >>  >>  >>  >>  symbolic link `/dev/ttySL0' -> `/dev/pts/2' created.
> >  >>  >>  >>  >>  >>  >>  modem `hw:0,6' created. TTY is `/dev/pts/2'
> >  >>  >>  >>  >>  >>  >>  <102.812335> open file: /var/lib/slmodem/data.hw:0,6...
> >  >>  >>  >>  >>  >>  >>  <102.812400> cannot open '/var/lib/slmodem/data.hw:0,6': No such file or directory
> >  >>  >>  >>  >>  >>  >>  <102.821020> main: rt applyed: SCHED_FIFO, pri 99
> >  >>  >>  >>  >>  >>  >>  Use `/dev/ttySL0' as modem device, Ctrl+C for termination.
> >  >>  >>  >>  >>  >>  >>  <123.805297> main: termios changed.
> >  >>  >>  >>  >>  >>  >>  <123.805359> hw:0,6: update termios...
> >  >>  >>  >>  >>  >>  >>  <123.899945> main: termios changed.
> >  >>  >>  >>  >>  >>  >>  <123.899990> hw:0,6: update termios...
> >  >>  >>  >>  >>  >>  >>  <123.999911> hw:0,6: run cmd: ATZ
> >  >>  >>  >>  >>  >>  >>  <123.999954> hw:0,6: modem reset...
> >  >>  >>  >>  >>  >>  >>  <123.999974> hw:0,6: modem set state: 1 --> 1...
> >  >>  >>  >>  >>  >>  >>  <123.999997> hw:0,6: modem set mode: -> 0...
> >  >>  >>  >>  >>  >>  >>  <124.000017> hw:0,6: modem report result: 0 (OK)
> >  >>  >>  >>  >>  >>  >>  <124.100007> hw:0,6: run cmd: ATQ0V1E1S0=0&C1&D2+FCLASS=0
> >  >>  >>  >>  >>  >>  >>  <124.100058> hw:0,6: modem set mode: -> 0...
> >  >>  >>  >>  >>  >>  >>  <124.100079> hw:0,6: modem report result: 0 (OK)
> >  >>  >>  >>  >>  >>  >>  <124.200095> hw:0,6: run cmd: ATDT7054579564
> >  >>  >>  >>  >>  >>  >>  <124.200156> hw:0,6: modem dial: T7054579564...
> >  >>  >>  >>  >>  >>  >>  <124.200177> hw:0,6: modem_dial_start...
> >  >>  >>  >>  >>  >>  >>  <124.200985> hw:0,6: modem_start..
> >  >>  >>  >>  >>  >>  >>  <124.201010> hw:0,6: modem set state: 1 --> 2...
> >  >>  >>  >>  >>  >>  >>  <124.201045> hw:0,6: new state: DP_ESTAB
> >  >>  >>  >>  >>  >>  >>  <124.201069> main: alsa_ioctl: cmd 8, arg 3...
> >  >>  >>  >>  >>  >>  >>  <124.201089> hw:0,6: modem set hook: 0 --> 1...
> >  >>  >>  >>  >>  >>  >>  <124.201119> main: alsa_ioctl: cmd 2, arg 1...
> >  >>  >>  >>  >>  >>  >>  <124.211866> main: alsa_ioctl: cmd 11, arg 0...
> >  >>  >>  >>  >>  >>  >>  <124.211950> main: alsa_ioctl: cmd 4, arg 2580...
> >  >>  >>  >>  >>  >>  >>  <124.211976> main: alsa_ioctl: cmd 7, arg 30...
> >  >>  >>  >>  >>  >>  >>  <124.211995> main: alsa_start...
> >  >>  >>  >>  >>  >>  >>  error: cannot setup hw params for playback: Invalid argument
> >  >>  >>  >>  >>  >>  >>  <124.212186> err: hw:0,6: modem start = -22: cannot start device.
> >  >>  >>  >>  >>  >>  >>  <124.212210> hw:0,6: modem_stop..
> >  >>  >>  >>  >>  >>  >>  <124.212227> hw:0,6: modem set hook: 1 --> 0...
> >  >>  >>  >>  >>  >>  >>  <124.212246> main: alsa_ioctl: cmd 2, arg 0...
> >  >>  >>  >>  >>  >>  >>  <124.219868> main: alsa_ioctl: cmd 8, arg 0...
> >  >>  >>  >>  >>  >>  >>  <124.220007> hw:0,6: modem set state: 2 --> 1...
> >  >>  >>  >>  >>  >>  >>  <124.220030> hw:0,6: new state: MODEM_IDLE
> >  >>  >>  >>  >>  >>  >>  <124.220053> hw:0,6: modem report result: 3 (NO CARRIER)
> >  >>  >>  >>  >>  >>  >>  <124.220081> hw:0,6: modem report result: 4 (ERROR)
> >  >>  >>  >>  >>  >>  >>  <124.520058> hw:0,6: run cmd: ATDT7054579564
> >  >>  >>  >>  >>  >>  >>  <124.520122> hw:0,6: modem dial: T7054579564...
> >  >>  >>  >>  >>  >>  >>  <124.520143> hw:0,6: modem_dial_start...
> >  >>  >>  >>  >>  >>  >>  <124.520965> hw:0,6: modem_start..
> >  >>  >>  >>  >>  >>  >>  <124.520988> hw:0,6: modem set state: 1 --> 2...
> >  >>  >>  >>  >>  >>  >>  <124.521023> hw:0,6: new state: DP_ESTAB
> >  >>  >>  >>  >>  >>  >>  <124.521056> main: alsa_ioctl: cmd 8, arg 3...
> >  >>  >>  >>  >>  >>  >>  <124.521089> hw:0,6: modem set hook: 0 --> 1...
> >  >>  >>  >>  >>  >>  >>  <124.521121> main: alsa_ioctl: cmd 2, arg 1...
> >  >>  >>  >>  >>  >>  >>  <124.531858> main: alsa_ioctl: cmd 11, arg 0...
> >  >>  >>  >>  >>  >>  >>  <124.531945> main: alsa_ioctl: cmd 4, arg 2580...
> >  >>  >>  >>  >>  >>  >>  <124.531974> main: alsa_ioctl: cmd 7, arg 30...
> >  >>  >>  >>  >>  >>  >>  <124.531993> main: alsa_start...
> >  >>  >>  >>  >>  >>  >>  error: cannot setup hw params for playback: Invalid argument
> >  >>  >>  >>  >>  >>  >>  <124.539942> err: hw:0,6: modem start = -22: cannot start device.
> >  >>  >>  >>  >>  >>  >>  <124.539978> hw:0,6: modem_stop..
> >  >>  >>  >>  >>  >>  >>  <124.539998> hw:0,6: modem set hook: 1 --> 0...
> >  >>  >>  >>  >>  >>  >>  <124.540017> main: alsa_ioctl: cmd 2, arg 0...
> >  >>  >>  >>  >>  >>  >>  <124.547855> main: alsa_ioctl: cmd 8, arg 0...
> >  >>  >>  >>  >>  >>  >>  <124.547978> hw:0,6: modem set state: 2 --> 1...
> >  >>  >>  >>  >>  >>  >>  <124.547997> hw:0,6: new state: MODEM_IDLE
> >  >>  >>  >>  >>  >>  >>  <124.548019> hw:0,6: modem report result: 3 (NO CARRIER)
> >  >>  >>  >>  >>  >>  >>  <124.548048> hw:0,6: modem report result: 4 (ERROR)
> >  >>  >>  >>  >>  >>  >>  <124.848056> hw:0,6: run cmd: ATDT7054579564
> >  >>  >>  >>  >>  >>  >>  <124.848117> hw:0,6: modem dial: T7054579564...
> >  >>  >>  >>  >>  >>  >>  <124.848138> hw:0,6: modem_dial_start...
> >  >>  >>  >>  >>  >>  >>  <124.848943> hw:0,6: modem_start..
> >  >>  >>  >>  >>  >>  >>  <124.848967> hw:0,6: modem set state: 1 --> 2...
> >  >>  >>  >>  >>  >>  >>  <124.849002> hw:0,6: new state: DP_ESTAB
> >  >>  >>  >>  >>  >>  >>  <124.849035> main: alsa_ioctl: cmd 8, arg 3...
> >  >>  >>  >>  >>  >>  >>  <124.849067> hw:0,6: modem set hook: 0 --> 1...
> >  >>  >>  >>  >>  >>  >>  <124.849099> main: alsa_ioctl: cmd 2, arg 1...
> >  >>  >>  >>  >>  >>  >>  <124.859854> main: alsa_ioctl: cmd 11, arg 0...
> >  >>  >>  >>  >>  >>  >>  <124.859941> main: alsa_ioctl: cmd 4, arg 2580...
> >  >>  >>  >>  >>  >>  >>  <124.859965> main: alsa_ioctl: cmd 7, arg 30...
> >  >>  >>  >>  >>  >>  >>  <124.859984> main: alsa_start...
> >  >>  >>  >>  >>  >>  >>  error: cannot setup hw params for playback: Invalid argument
> >  >>  >>  >>  >>  >>  >>  <124.867934> err: hw:0,6: modem start = -22: cannot start device.
> >  >>  >>  >>  >>  >>  >>  <124.867969> hw:0,6: modem_stop..
> >  >>  >>  >>  >>  >>  >>  <124.867988> hw:0,6: modem set hook: 1 --> 0...
> >  >>  >>  >>  >>  >>  >>  <124.868007> main: alsa_ioctl: cmd 2, arg 0...
> >  >>  >>  >>  >>  >>  >>  <124.875855> main: alsa_ioctl: cmd 8, arg 0...
> >  >>  >>  >>  >>  >>  >>  <124.875980> hw:0,6: modem set state: 2 --> 1...
> >  >>  >>  >>  >>  >>  >>  <124.875999> hw:0,6: new state: MODEM_IDLE
> >  >>  >>  >>  >>  >>  >>  <124.876017> hw:0,6: modem report result: 3 (NO CARRIER)
> >  >>  >>  >>  >>  >>  >>  <124.876043> hw:0,6: modem report result: 4 (ERROR)
> >  >>  >>  >>  >>  >>  >>  <125.176053> hw:0,6: run cmd: ATDT7054579564
> >  >>  >>  >>  >>  >>  >>  <125.176123> hw:0,6: modem dial: T7054579564...
> >  >>  >>  >>  >>  >>  >>  <125.176144> hw:0,6: modem_dial_start...
> >  >>  >>  >>  >>  >>  >>  <125.176945> hw:0,6: modem_start..
> >  >>  >>  >>  >>  >>  >>  <125.176969> hw:0,6: modem set state: 1 --> 2...
> >  >>  >>  >>  >>  >>  >>  <125.177003> hw:0,6: new state: DP_ESTAB
> >  >>  >>  >>  >>  >>  >>  <125.177037> main: alsa_ioctl: cmd 8, arg 3...
> >  >>  >>  >>  >>  >>  >>  <125.177068> hw:0,6: modem set hook: 0 --> 1...
> >  >>  >>  >>  >>  >>  >>  <125.177101> main: alsa_ioctl: cmd 2, arg 1...
> >  >>  >>  >>  >>  >>  >>  <125.187850> main: alsa_ioctl: cmd 11, arg 0...
> >  >>  >>  >>  >>  >>  >>  <125.187935> main: alsa_ioctl: cmd 4, arg 2580...
> >  >>  >>  >>  >>  >>  >>  <125.187961> main: alsa_ioctl: cmd 7, arg 30...
> >  >>  >>  >>  >>  >>  >>  <125.187980> main: alsa_start...
> >  >>  >>  >>  >>  >>  >>  error: cannot setup hw params for playback: Invalid argument
> >  >>  >>  >>  >>  >>  >>  <125.195938> err: hw:0,6: modem start = -22: cannot start device.
> >  >>  >>  >>  >>  >>  >>  <125.195974> hw:0,6: modem_stop..
> >  >>  >>  >>  >>  >>  >>  <125.195993> hw:0,6: modem set hook: 1 --> 0...
> >  >>  >>  >>  >>  >>  >>  <125.196013> main: alsa_ioctl: cmd 2, arg 0...
> >  >>  >>  >>  >>  >>  >>  <125.203844> main: alsa_ioctl: cmd 8, arg 0...
> >  >>  >>  >>  >>  >>  >>  <125.203967> hw:0,6: modem set state: 2 --> 1...
> >  >>  >>  >>  >>  >>  >>  <125.203986> hw:0,6: new state: MODEM_IDLE
> >  >>  >>  >>  >>  >>  >>  <125.204005> hw:0,6: modem report result: 3 (NO CARRIER)
> >  >>  >>  >>  >>  >>  >>  <125.204031> hw:0,6: modem report result: 4 (ERROR)
> >  >>  >>  >>  >>  >>  >>  <125.504051> hw:0,6: run cmd: ATDT7054579564
> >  >>  >>  >>  >>  >>  >>  <125.504122> hw:0,6: modem dial: T7054579564...
> >  >>  >>  >>  >>  >>  >>  <125.504144> hw:0,6: modem_dial_start...
> >  >>  >>  >>  >>  >>  >>  <125.504949> hw:0,6: modem_start..
> >  >>  >>  >>  >>  >>  >>  <125.504973> hw:0,6: modem set state: 1 --> 2...
> >  >>  >>  >>  >>  >>  >>  <125.505007> hw:0,6: new state: DP_ESTAB
> >  >>  >>  >>  >>  >>  >>  <125.505041> main: alsa_ioctl: cmd 8, arg 3...
> >  >>  >>  >>  >>  >>  >>  <125.505073> hw:0,6: modem set hook: 0 --> 1...
> >  >>  >>  >>  >>  >>  >>  <125.505106> main: alsa_ioctl: cmd 2, arg 1...
> >  >>  >>  >>  >>  >>  >>  <125.515841> main: alsa_ioctl: cmd 11, arg 0...
> >  >>  >>  >>  >>  >>  >>  <125.515928> main: alsa_ioctl: cmd 4, arg 2580...
> >  >>  >>  >>  >>  >>  >>  <125.515953> main: alsa_ioctl: cmd 7, arg 30...
> >  >>  >>  >>  >>  >>  >>  <125.515972> main: alsa_start...
> >  >>  >>  >>  >>  >>  >>  error: cannot setup hw params for playback: Invalid argument
> >  >>  >>  >>  >>  >>  >>  <125.523920> err: hw:0,6: modem start = -22: cannot start device.
> >  >>  >>  >>  >>  >>  >>  <125.523959> hw:0,6: modem_stop..
> >  >>  >>  >>  >>  >>  >>  <125.523978> hw:0,6: modem set hook: 1 --> 0...
> >  >>  >>  >>  >>  >>  >>  <125.523997> main: alsa_ioctl: cmd 2, arg 0...
> >  >>  >>  >>  >>  >>  >>  <125.531846> main: alsa_ioctl: cmd 8, arg 0...
> >  >>  >>  >>  >>  >>  >>  <125.531970> hw:0,6: modem set state: 2 --> 1...
> >  >>  >>  >>  >>  >>  >>  <125.531990> hw:0,6: new state: MODEM_IDLE
> >  >>  >>  >>  >>  >>  >>  <125.532008> hw:0,6: modem report result: 3 (NO CARRIER)
> >  >>  >>  >>  >>  >>  >>  <125.532034> hw:0,6: modem report result: 4 (ERROR)
> >  >>  >>  >>  >>  >>  >>  <125.832041> hw:0,6: run cmd: ATDT7054579564
> >  >>  >>  >>  >>  >>  >>  <125.832109> hw:0,6: modem dial: T7054579564...
> >  >>  >>  >>  >>  >>  >>  <125.832130> hw:0,6: modem_dial_start...
> >  >>  >>  >>  >>  >>  >>  <125.832932> hw:0,6: modem_start..
> >  >>  >>  >>  >>  >>  >>  <125.832963> hw:0,6: modem set state: 1 --> 2...
> >  >>  >>  >>  >>  >>  >>  <125.832997> hw:0,6: new state: DP_ESTAB
> >  >>  >>  >>  >>  >>  >>  <125.833021> main: alsa_ioctl: cmd 8, arg 3...
> >  >>  >>  >>  >>  >>  >>  <125.833041> hw:0,6: modem set hook: 0 --> 1...
> >  >>  >>  >>  >>  >>  >>  <125.833072> main: alsa_ioctl: cmd 2, arg 1...
> >  >>  >>  >>  >>  >>  >>  <125.843834> main: alsa_ioctl: cmd 11, arg 0...
> >  >>  >>  >>  >>  >>  >>  <125.843925> main: alsa_ioctl: cmd 4, arg 2580...
> >  >>  >>  >>  >>  >>  >>  <125.843949> main: alsa_ioctl: cmd 7, arg 30...
> >  >>  >>  >>  >>  >>  >>  <125.843968> main: alsa_start...
> >  >>  >>  >>  >>  >>  >>  error: cannot setup hw params for playback: Invalid argument
> >  >>  >>  >>  >>  >>  >>  <125.851921> err: hw:0,6: modem start = -22: cannot start device.
> >  >>  >>  >>  >>  >>  >>  <125.851957> hw:0,6: modem_stop..
> >  >>  >>  >>  >>  >>  >>  <125.851976> hw:0,6: modem set hook: 1 --> 0...
> >  >>  >>  >>  >>  >>  >>  <125.851995> main: alsa_ioctl: cmd 2, arg 0...
> >  >>  >>  >>  >>  >>  >>  <125.859832> main: alsa_ioctl: cmd 8, arg 0...
> >  >>  >>  >>  >>  >>  >>  <125.859958> hw:0,6: modem set state: 2 --> 1...
> >  >>  >>  >>  >>  >>  >>  <125.859978> hw:0,6: new state: MODEM_IDLE
> >  >>  >>  >>  >>  >>  >>  <125.859996> hw:0,6: modem report result: 3 (NO CARRIER)
> >  >>  >>  >>  >>  >>  >>  <125.860023> hw:0,6: modem report result: 4 (ERROR)
> >  >>  >>  >>  >>  >>  >>  <126.160045> hw:0,6: run cmd: ATDT7054579564
> >  >>  >>  >>  >>  >>  >>  <126.160121> hw:0,6: modem dial: T7054579564...
> >  >>  >>  >>  >>  >>  >>  <126.160141> hw:0,6: modem_dial_start...
> >  >>  >>  >>  >>  >>  >>  <126.160954> hw:0,6: modem_start..
> >  >>  >>  >>  >>  >>  >>  <126.160978> hw:0,6: modem set state: 1 --> 2...
> >  >>  >>  >>  >>  >>  >>  <126.161012> hw:0,6: new state: DP_ESTAB
> >  >>  >>  >>  >>  >>  >>  <126.161036> main: alsa_ioctl: cmd 8, arg 3...
> >  >>  >>  >>  >>  >>  >>  <126.161056> hw:0,6: modem set hook: 0 --> 1...
> >  >>  >>  >>  >>  >>  >>  <126.161088> main: alsa_ioctl: cmd 2, arg 1...
> >  >>  >>  >>  >>  >>  >>  <126.171827> main: alsa_ioctl: cmd 11, arg 0...
> >  >>  >>  >>  >>  >>  >>  <126.171919> main: alsa_ioctl: cmd 4, arg 2580...
> >  >>  >>  >>  >>  >>  >>  <126.171944> main: alsa_ioctl: cmd 7, arg 30...
> >  >>  >>  >>  >>  >>  >>  <126.171964> main: alsa_start...
> >  >>  >>  >>  >>  >>  >>  error: cannot setup hw params for playback: Invalid argument
> >  >>  >>  >>  >>  >>  >>  <126.179911> err: hw:0,6: modem start = -22: cannot start device.
> >  >>  >>  >>  >>  >>  >>  <126.179947> hw:0,6: modem_stop..
> >  >>  >>  >>  >>  >>  >>  <126.179967> hw:0,6: modem set hook: 1 --> 0...
> >  >>  >>  >>  >>  >>  >>  <126.179986> main: alsa_ioctl: cmd 2, arg 0...
> >  >>  >>  >>  >>  >>  >>  <126.187831> main: alsa_ioctl: cmd 8, arg 0...
> >  >>  >>  >>  >>  >>  >>  <126.187956> hw:0,6: modem set state: 2 --> 1...
> >  >>  >>  >>  >>  >>  >>  <126.187975> hw:0,6: new state: MODEM_IDLE
> >  >>  >>  >>  >>  >>  >>  <126.187993> hw:0,6: modem report result: 3 (NO CARRIER)
> >  >>  >>  >>  >>  >>  >>  <126.188019> hw:0,6: modem report result: 4 (ERROR)
> >  >>  >>  >>  >>  >>  >>  <126.488026> hw:0,6: run cmd: ATDT7054579564
> >  >>  >>  >>  >>  >>  >>  <126.488096> hw:0,6: modem dial: T7054579564...
> >  >>  >>  >>  >>  >>  >>  <126.488117> hw:0,6: modem_dial_start...
> >  >>  >>  >>  >>  >>  >>  <126.488919> hw:0,6: modem_start..
> >  >>  >>  >>  >>  >>  >>  <126.488949> hw:0,6: modem set state: 1 --> 2...
> >  >>  >>  >>  >>  >>  >>  <126.488971> hw:0,6: new state: DP_ESTAB
> >  >>  >>  >>  >>  >>  >>  <126.488992> main: alsa_ioctl: cmd 8, arg 3...
> >  >>  >>  >>  >>  >>  >>  <126.489013> hw:0,6: modem set hook: 0 --> 1...
> >  >>  >>  >>  >>  >>  >>  <126.489044> main: alsa_ioctl: cmd 2, arg 1...
> >  >>  >>  >>  >>  >>  >>  <126.499829> main: alsa_ioctl: cmd 11, arg 0...
> >  >>  >>  >>  >>  >>  >>  <126.499927> main: alsa_ioctl: cmd 4, arg 2580...
> >  >>  >>  >>  >>  >>  >>  <126.499953> main: alsa_ioctl: cmd 7, arg 30...
> >  >>  >>  >>  >>  >>  >>  <126.499972> main: alsa_start...
> >  >>  >>  >>  >>  >>  >>  error: cannot setup hw params for playback: Invalid argument
> >  >>  >>  >>  >>  >>  >>  <126.507907> err: hw:0,6: modem start = -22: cannot start device.
> >  >>  >>  >>  >>  >>  >>  <126.507944> hw:0,6: modem_stop..
> >  >>  >>  >>  >>  >>  >>  <126.507963> hw:0,6: modem set hook: 1 --> 0...
> >  >>  >>  >>  >>  >>  >>  <126.507983> main: alsa_ioctl: cmd 2, arg 0...
> >  >>  >>  >>  >>  >>  >>  <126.515817> main: alsa_ioctl: cmd 8, arg 0...
> >  >>  >>  >>  >>  >>  >>  <126.515965> hw:0,6: modem set state: 2 --> 1...
> >  >>  >>  >>  >>  >>  >>  <126.515986> hw:0,6: new state: MODEM_IDLE
> >  >>  >>  >>  >>  >>  >>  <126.516004> hw:0,6: modem report result: 3 (NO CARRIER)
> >  >>  >>  >>  >>  >>  >>  <126.516030> hw:0,6: modem report result: 4 (ERROR)
> >  >>  >>  >>  >>  >>  >>  <126.728412> main: termios changed.
> >  >>  >>  >>  >>  >>  >>  <126.728456> hw:0,6: update termios...
> >  >>  >>  >>  >>  >>  >>  <126.728479> main: pty closed.
> >  >>  >>  >>  >>  >>  >>
> >  >>  >>  >>  >>  >>  >>
> >  >>  >>  >>  >>  >>  >>
> >  >>  >>  >>  >>  >>  >>
> >  >>  >>  >>  >>  >>  >>
> >  >>  >>  >>  >>  >>  >>
> >  >>  >>  >>  >>  >>  >
> >  >>  >>  >>  >>  >>  >
> >  >>  >>  >>  >>  >>
> >  >>  >>  >>  >>  >>
> >  >>  >>  >>  >>  >
> >  >>  >>  >>  >>  >
> >  >>  >>  >>  >>
> >  >>  >>  >>  >>
> >  >>  >>  >>  >>
> >  >>  >>  >>  >
> >  >>  >>  >>  >
> >  >>  >>  >>
> >  >>  >>  >>
> >  >>  >>  >> anita@anitas-computer:~$ sudo updatedb
> >  >>  >>  >>  Password:
> >  >>  >>  >>  anita@anitas-computer:~$ locate sl-modem-daemon
> >  >>  >>  >>  anita@anitas-computer:~$ cd /usr/src/modules
> >  >>  >>  >>  anita@anitas-computer:/usr/src/modules$ ls
> >  >>  >>  >>  alsa
> >  >>  >>  >>  anita@anitas-computer:/usr/src/modules$ cd alsa
> >  >>  >>  >>  anita@anitas-computer:/usr/src/modules/alsa$ HEADERS=/lib/modules/2.6.20-15-generic/build
> >  >>  >>  >>  anita@anitas-computer:/usr/src/modules/alsa$ ls $HEADERS
> >  >>  >>  >>  arch     fs       kernel    Module.symvers  sound
> >  >>  >>  >>  block    include  lib       net             ubuntu
> >  >>  >>  >>  crypto   init     Makefile  scripts         usr
> >  >>  >>  >>  drivers  ipc      mm        security
> >  >>  >>  >>  anita@anitas-computer:/usr/src/modules/alsa$ cd alsa-driver-1.0.16
> >  >>  >>  >>  anita@anitas-computer:/usr/src/modules/alsa/alsa-driver-1.0.16$ ./configure --with-kernel=$HEADERS --with-build=$HEADERS --with-cards=hda-intel
> >  >>  >>  >>  checking for gcc... gcc
> >  >>  >>  >>  checking for C compiler default output file name... configure: error: C compiler cannot create executables
> >  >>  >>  >>  See `config.log' for more details.
> >  >>  >>  >>  anita@anitas-computer:/usr/src/modules/alsa/alsa-driver-1.0.16$ gedit config.log
> >  >>  >>  >>  anita@anitas-computer:/usr/src/modules/alsa/alsa-driver-1.0.16$
> >  >>  >>  >>
> >  >>  >>  >>
> >  >>  >>  >>
> >  >>  >>  >>
> >  >>  >>  >>
> >  >>  >>  >
> >  >>  >>  >
> >  >>  >>
> >  >>  >>
> >  >>  >> anita@anitas-computer:~$ sudo chown -R anita:anita /usr/src/modules
> >  >>  >>  Password:
> >  >>  >>  anita@anitas-computer:~$ cd /usr/src/modules/alsa
> >  >>  >>  anita@anitas-computer:/usr/src/modules/alsa$ ls
> >  >>  >>  alsa-driver-1.0.16  alsa-lib-1.0.16
> >  >>  >>  anita@anitas-computer:/usr/src/modules/alsa$ cd alsa-driver-1.0.16
> >  >>  >>  anita@anitas-computer:/usr/src/modules/alsa/alsa-driver-1.0.16$ HEADERS=/lib/modules/2.6.20-15-generic/build
> >  >>  >>  anita@anitas-computer:/usr/src/modules/alsa/alsa-driver-1.0.16$ ls $HEADERS
> >  >>  >>  arch     fs       kernel    Module.symvers  sound
> >  >>  >>  block    include  lib       net             ubuntu
> >  >>  >>  crypto   init     Makefile  scripts         usr
> >  >>  >>  drivers  ipc      mm        security
> >  >>  >>  anita@anitas-computer:/usr/src/modules/alsa/alsa-driver-1.0.16$ echo $HEADERS
> >  >>  >>  /lib/modules/2.6.20-15-generic/build
> >  >>  >>  anita@anitas-computer:/usr/src/modules/alsa/alsa-driver-1.0.16$ ./configure --with-kernel=$HEADERS --with-build=$HEADERS --with-cards=hda-intel
> >  >>  >>  checking for gcc... gcc
> >  >>  >>  checking for C compiler default output file name... configure: error: C compiler cannot create executables
> >  >>  >>  See `config.log' for more details.
> >  >>  >>  anita@anitas-computer:/usr/src/modules/alsa/alsa-driver-1.0.16$ make clean
> >  >>  >>  rm -f .depend *.o snd.map*
> >  >>  >>  rm -f /*.ver
> >  >>  >>  rm -f modules/*.o modules/*.ko
> >  >>  >>  make[1]: Entering directory `/usr/src/modules/alsa/alsa-driver-1.0.16/acore'
> >  >>  >>  Makefile:6: /usr/src/modules/alsa/alsa-driver-1.0.16/Makefile.conf: No such file or directory
> >  >>  >>  /usr/src/modules/alsa/alsa-driver-1.0.16/Rules.make:75: /Rules.make1: No such file or directory
> >  >>  >>  make[1]: *** No rule to make target `/Rules.make1'.  Stop.
> >  >>  >>  make[1]: Leaving directory `/usr/src/modules/alsa/alsa-driver-1.0.16/acore'
> >  >>  >>  make: *** [clean] Error 1
> >  >>  >>  anita@anitas-computer:/usr/src/modules/alsa/alsa-driver-1.0.16$ ./configure --with-kernel=$HEADERS --with-build=$HEADERS --with-cards=hda-intel
> >  >>  >>  checking for gcc... gcc
> >  >>  >>  checking for C compiler default output file name... configure: error: C compiler cannot create executables
> >  >>  >>  See `config.log' for more details.
> >  >>  >>  anita@anitas-computer:/usr/src/modules/alsa/alsa-driver-1.0.16$ ls -l /usr/bin/gcc*
> >  >>  >>  lrwxrwxrwx 1 root root      7 2007-11-18 08:25 /usr/bin/gcc -> gcc-4.1
> >  >>  >>  -rwxr-xr-x 1 root root 183904 2007-03-02 21:52 /usr/bin/gcc-4.1
> >  >>  >>  lrwxrwxrwx 1 root root     10 2007-11-18 08:25 /usr/bin/gccbug -> gccbug-4.1
> >  >>  >>  -rwxr-xr-x 1 root root  16266 2007-03-02 21:47 /usr/bin/gccbug-4.1
> >  >>  >>  -rwxr-xr-x 1 root root   2018 2006-12-20 09:41 /usr/bin/gccmakedep
> >  >>  >>  anita@anitas-computer:/usr/src/modules/alsa/alsa-driver-1.0.16$
> >  >>  >>
> >  >>  >>
> >  >>  >>
> >  >>  >>
> >  >>  >>
> >  >>  >
> >  >>  >
> >  >>
> >  >>
> >  >> anita@anitas-computer:~$ cd /usr/src/modules/alsa
> >  >>  anita@anitas-computer:/usr/src/modules/alsa$ ls
> >  >>  alsa-driver-1.0.16  alsa-lib-1.0.16
> >  >>  anita@anitas-computer:/usr/src/modules/alsa$ cd alsa-driver-1.0.16
> >  >>  anita@anitas-computer:/usr/src/modules/alsa/alsa-driver-1.0.16$ HEADERS=/lib/modules/2.6.20-15-generic/build
> >  >>  anita@anitas-computer:/usr/src/modules/alsa/alsa-driver-1.0.16$ ls $HEADERS
> >  >>  arch     fs       kernel    Module.symvers  sound
> >  >>  block    include  lib       net             ubuntu
> >  >>  crypto   init     Makefile  scripts         usr
> >  >>  drivers  ipc      mm        security
> >  >>  anita@anitas-computer:/usr/src/modules/alsa/alsa-driver-1.0.16$ ./configure --with-kernel=$HEADERS --with-build=$HEADERS --with-cards=hda-intel
> >  >>  checking for gcc... gcc
> >  >>  checking for C compiler default output file name... configure: error: C compiler cannot create executables
> >  >>  See `config.log' for more details.
> >  >>  anita@anitas-computer:/usr/src/modules/alsa/alsa-driver-1.0.16$ gedit config.log
> >  >>  anita@anitas-computer:/usr/src/modules/alsa/alsa-driver-1.0.16$
> >  >>
> >  >>
> >  >> This file contains any messages produced by compilers while
> >  >>  running configure, to aid debugging if configure makes a mistake.
> >  >>
> >  >>  It was created by configure, which was
> >  >>  generated by GNU Autoconf 2.60.  Invocation command line was
> >  >>
> >  >>   $ ./configure --with-kernel=/lib/modules/2.6.20-15-generic/build --with-build=/lib/modules/2.6.20-15-generic/build --with-cards=hda-intel
> >  >>
> >  >>  ## --------- ##
> >  >>  ## Platform. ##
> >  >>  ## --------- ##
> >  >>
> >  >>  hostname = anitas-computer
> >  >>  uname -m = i686
> >  >>  uname -r = 2.6.20-15-generic
> >  >>  uname -s = Linux
> >  >>  uname -v = #2 SMP Sun Apr 15 07:36:31 UTC 2007
> >  >>
> >  >>  /usr/bin/uname -p = unknown
> >  >>  /bin/uname -X     = unknown
> >  >>
> >  >>  /bin/arch              = i686
> >  >>  /usr/bin/arch -k       = unknown
> >  >>  /usr/convex/getsysinfo = unknown
> >  >>  /usr/bin/hostinfo      = unknown
> >  >>  /bin/machine           = unknown
> >  >>  /usr/bin/oslevel       = unknown
> >  >>  /bin/universe          = unknown
> >  >>
> >  >>  PATH: /usr/local/sbin
> >  >>  PATH: /usr/local/bin
> >  >>  PATH: /usr/sbin
> >  >>  PATH: /usr/bin
> >  >>  PATH: /sbin
> >  >>  PATH: /bin
> >  >>  PATH: /usr/games
> >  >>
> >  >>
> >  >>  ## ----------- ##
> >  >>  ## Core tests. ##
> >  >>  ## ----------- ##
> >  >>
> >  >>  configure:2101: checking for gcc
> >  >>  configure:2117: found /usr/bin/gcc
> >  >>  configure:2128: result: gcc
> >  >>  configure:2366: checking for C compiler version
> >  >>  configure:2373: gcc --version >&5
> >  >>  gcc (GCC) 4.1.2 (Ubuntu 4.1.2-0ubuntu4)
> >  >>  Copyright (C) 2006 Free Software Foundation, Inc.
> >  >>  This is free software; see the source for copying conditions.  There is NO
> >  >>  warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
> >  >>
> >  >>  configure:2376: $? = 0
> >  >>  configure:2383: gcc -v >&5
> >  >>  Using built-in specs.
> >  >>  Target: i486-linux-gnu
> >  >>  Configured with: ../src/configure -v --enable-languages=c,c++,fortran,objc,obj-c++,treelang --prefix=/usr --enable-shared --with-system-zlib --libexecdir=/usr/lib --without-included-gettext --enable-threads=posix --enable-nls --program-suffix=-4.1 --enable-__cxa_atexit --enable-clocale=gnu --enable-libstdcxx-debug --enable-mpfr --enable-checking=release i486-linux-gnu
> >  >>  Thread model: posix
> >  >>  gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)
> >  >>  configure:2386: $? = 0
> >  >>  configure:2393: gcc -V >&5
> >  >>  gcc: '-V' option must have argument
> >  >>  configure:2396: $? = 1
> >  >>  configure:2419: checking for C compiler default output file name
> >  >>  configure:2446: gcc    conftest.c  >&5
> >  >>  /usr/bin/ld: crt1.o: No such file: No such file or directory
> >  >>  collect2: ld returned 1 exit status
> >  >>  configure:2449: $? = 1
> >  >>  configure: failed program was:
> >  >>  | /* confdefs.h.  */
> >  >>  | #define PACKAGE_NAME ""
> >  >>  | #define PACKAGE_TARNAME ""
> >  >>  | #define PACKAGE_VERSION ""
> >  >>  | #define PACKAGE_STRING ""
> >  >>  | #define PACKAGE_BUGREPORT ""
> >  >>  | /* end confdefs.h.  */
> >  >>  |
> >  >>  | int
> >  >>  | main ()
> >  >>  | {
> >  >>  |
> >  >>  |   ;
> >  >>  |   return 0;
> >  >>  | }
> >  >>  configure:2488: error: C compiler cannot create executables
> >  >>  See `config.log' for more details.
> >  >>
> >  >>  ## ---------------- ##
> >  >>  ## Cache variables. ##
> >  >>  ## ---------------- ##
> >  >>
> >  >>  ac_cv_env_CC_set=
> >  >>  ac_cv_env_CC_value=
> >  >>  ac_cv_env_CFLAGS_set=
> >  >>  ac_cv_env_CFLAGS_value=
> >  >>  ac_cv_env_CPPFLAGS_set=
> >  >>  ac_cv_env_CPPFLAGS_value=
> >  >>  ac_cv_env_CPP_set=
> >  >>  ac_cv_env_CPP_value=
> >  >>  ac_cv_env_LDFLAGS_set=
> >  >>  ac_cv_env_LDFLAGS_value=
> >  >>  ac_cv_env_build_alias_set=
> >  >>  ac_cv_env_build_alias_value=
> >  >>  ac_cv_env_host_alias_set=
> >  >>  ac_cv_env_host_alias_value=
> >  >>  ac_cv_env_target_alias_set=
> >  >>  ac_cv_env_target_alias_value=
> >  >>  ac_cv_prog_ac_ct_CC=gcc
> >  >>
> >  >>  ## ----------------- ##
> >  >>  ## Output variables. ##
> >  >>  ## ----------------- ##
> >  >>
> >  >>  AR=''
> >  >>  ARCH=''
> >  >>  AS=''
> >  >>  CC='gcc'
> >  >>  CFLAGS=''
> >  >>  CONFIG_AC97_BUS=''
> >  >>  CONFIG_ALPHA=''
> >  >>  CONFIG_ARCH_AT91=''
> >  >>  CONFIG_ARCH_PXA=''
> >  >>  CONFIG_ARCH_S3C2410=''
> >  >>  CONFIG_ARCH_SA1100=''
> >  >>  CONFIG_ARM=''
> >  >>  CONFIG_ARM_AMBA=''
> >  >>  CONFIG_ATMEL_SSC=''
> >  >>  CONFIG_BROKEN=''
> >  >>  CONFIG_CPU_SUBTYPE_SH7760=''
> >  >>  CONFIG_EXPERIMENTAL=''
> >  >>  CONFIG_FW_LOADER=''
> >  >>  CONFIG_GSC=''
> >  >>  CONFIG_HAS_DMA=''
> >  >>  CONFIG_HAS_IOMEM=''
> >  >>  CONFIG_HAS_IOPORT=''
> >  >>  CONFIG_HIGH_RES_TIMERS=''
> >  >>  CONFIG_HPET=''
> >  >>  CONFIG_I2C=''
> >  >>  CONFIG_I2C_POWERMAC=''
> >  >>  CONFIG_I2C_SENSOR=''
> >  >>  CONFIG_INPUT=''
> >  >>  CONFIG_ISA=''
> >  >>  CONFIG_ISAPNP=''
> >  >>  CONFIG_ISAPNP_KERNEL=''
> >  >>  CONFIG_ISA_DMA_API=''
> >  >>  CONFIG_L3=''
> >  >>  CONFIG_MACH_E800=''
> >  >>  CONFIG_MACH_ETI_B1=''
> >  >>  CONFIG_MACH_ETI_C1=''
> >  >>  CONFIG_MACH_NEO1973_GTA01=''
> >  >>  CONFIG_MACH_POODLE=''
> >  >>  CONFIG_MACH_SMDK2443=''
> >  >>  CONFIG_MACH_TOSA=''
> >  >>  CONFIG_MIPS=''
> >  >>  CONFIG_MPC8610_HPCD=''
> >  >>  CONFIG_PARISC=''
> >  >>  CONFIG_PARPORT=''
> >  >>  CONFIG_PCI=''
> >  >>  CONFIG_PCMCIA=''
> >  >>  CONFIG_PM=''
> >  >>  CONFIG_PNP=''
> >  >>  CONFIG_PNP_KERNEL=''
> >  >>  CONFIG_PPC32=''
> >  >>  CONFIG_PPC64=''
> >  >>  CONFIG_PPC=''
> >  >>  CONFIG_PPC_PMAC=''
> >  >>  CONFIG_PROC_FS=''
> >  >>  CONFIG_PS3_PS3AV=''
> >  >>  CONFIG_PXA_SHARP_C7XX=''
> >  >>  CONFIG_PXA_SHARP_CXX00=''
> >  >>  CONFIG_RTC=''
> >  >>  CONFIG_SBUS=''
> >  >>  CONFIG_SGI=''
> >  >>  CONFIG_SH_DMABRG=''
> >  >>  CONFIG_SH_DREAMCAST=''
> >  >>  CONFIG_SND=''
> >  >>  CONFIG_SND_AC97_CODEC=''
> >  >>  CONFIG_SND_AC97_POWER_SAVE=''
> >  >>  CONFIG_SND_AC97_POWER_SAVE_DEFAULT=''
> >  >>  CONFIG_SND_AD1816A=''
> >  >>  CONFIG_SND_AD1848=''
> >  >>  CONFIG_SND_AD1848_LIB=''
> >  >>  CONFIG_SND_AD1889=''
> >  >>  CONFIG_SND_ADLIB=''
> >  >>  CONFIG_SND_AICA=''
> >  >>  CONFIG_SND_ALI5451=''
> >  >>  CONFIG_SND_ALS100=''
> >  >>  CONFIG_SND_ALS300=''
> >  >>  CONFIG_SND_ALS4000=''
> >  >>  CONFIG_SND_AOA=''
> >  >>  CONFIG_SND_AOA_FABRIC_LAYOUT=''
> >  >>  CONFIG_SND_AOA_ONYX=''
> >  >>  CONFIG_SND_AOA_SOUNDBUS=''
> >  >>  CONFIG_SND_AOA_SOUNDBUS_I2S=''
> >  >>  CONFIG_SND_AOA_TAS=''
> >  >>  CONFIG_SND_AOA_TOONIE=''
> >  >>  CONFIG_SND_ARMAACI=''
> >  >>  CONFIG_SND_ASIHPI=''
> >  >>  CONFIG_SND_AT73C213=''
> >  >>  CONFIG_SND_AT73C213_TARGET_BITRATE=''
> >  >>  CONFIG_SND_AT91_SOC=''
> >  >>  CONFIG_SND_AT91_SOC_ETI_B1_WM8731=''
> >  >>  CONFIG_SND_AT91_SOC_ETI_SLAVE=''
> >  >>  CONFIG_SND_AT91_SOC_SSC=''
> >  >>  CONFIG_SND_ATIIXP=''
> >  >>  CONFIG_SND_ATIIXP_MODEM=''
> >  >>  CONFIG_SND_AU1X00=''
> >  >>  CONFIG_SND_AU8810=''
> >  >>  CONFIG_SND_AU8820=''
> >  >>  CONFIG_SND_AU8830=''
> >  >>  CONFIG_SND_AZT2320=''
> >  >>  CONFIG_SND_AZT3328=''
> >  >>  CONFIG_SND_BIT32_EMUL=''
> >  >>  CONFIG_SND_BT87X=''
> >  >>  CONFIG_SND_BT87X_OVERCLOCK=''
> >  >>  CONFIG_SND_CA0106=''
> >  >>  CONFIG_SND_CMI8330=''
> >  >>  CONFIG_SND_CMIPCI=''
> >  >>  CONFIG_SND_CS4231=''
> >  >>  CONFIG_SND_CS4231_LIB=''
> >  >>  CONFIG_SND_CS4232=''
> >  >>  CONFIG_SND_CS4236=''
> >  >>  CONFIG_SND_CS4281=''
> >  >>  CONFIG_SND_CS46XX=''
> >  >>  CONFIG_SND_CS46XX_NEW_DSP=''
> >  >>  CONFIG_SND_CS5530=''
> >  >>  CONFIG_SND_CS5535AUDIO=''
> >  >>  CONFIG_SND_DARLA20=''
> >  >>  CONFIG_SND_DARLA24=''
> >  >>  CONFIG_SND_DATE=''
> >  >>  CONFIG_SND_DEBUG=''
> >  >>  CONFIG_SND_DEBUG_DETECT=''
> >  >>  CONFIG_SND_DEBUG_MEMORY=''
> >  >>  CONFIG_SND_DT019X=''
> >  >>  CONFIG_SND_DUMMY=''
> >  >>  CONFIG_SND_DYNAMIC_MINORS=''
> >  >>  CONFIG_SND_ECHO3G=''
> >  >>  CONFIG_SND_EMU10K1=''
> >  >>  CONFIG_SND_EMU10K1X=''
> >  >>  CONFIG_SND_ENS1370=''
> >  >>  CONFIG_SND_ENS1371=''
> >  >>  CONFIG_SND_ES1688=''
> >  >>  CONFIG_SND_ES18XX=''
> >  >>  CONFIG_SND_ES1938=''
> >  >>  CONFIG_SND_ES1968=''
> >  >>  CONFIG_SND_ES968=''
> >  >>  CONFIG_SND_FM801=''
> >  >>  CONFIG_SND_FM801_TEA575X=''
> >  >>  CONFIG_SND_FM801_TEA575X_BOOL=''
> >  >>  CONFIG_SND_GINA20=''
> >  >>  CONFIG_SND_GINA24=''
> >  >>  CONFIG_SND_GUSCLASSIC=''
> >  >>  CONFIG_SND_GUSEXTREME=''
> >  >>  CONFIG_SND_GUSMAX=''
> >  >>  CONFIG_SND_GUS_SYNTH=''
> >  >>  CONFIG_SND_HARMONY=''
> >  >>  CONFIG_SND_HDA_CODEC_ANALOG=''
> >  >>  CONFIG_SND_HDA_CODEC_ATIHDMI=''
> >  >>  CONFIG_SND_HDA_CODEC_CMEDIA=''
> >  >>  CONFIG_SND_HDA_CODEC_CONEXANT=''
> >  >>  CONFIG_SND_HDA_CODEC_REALTEK=''
> >  >>  CONFIG_SND_HDA_CODEC_SI3054=''
> >  >>  CONFIG_SND_HDA_CODEC_SIGMATEL=''
> >  >>  CONFIG_SND_HDA_CODEC_VIA=''
> >  >>  CONFIG_SND_HDA_GENERIC=''
> >  >>  CONFIG_SND_HDA_HWDEP=''
> >  >>  CONFIG_SND_HDA_INTEL=''
> >  >>  CONFIG_SND_HDA_POWER_SAVE=''
> >  >>  CONFIG_SND_HDA_POWER_SAVE_DEFAULT=''
> >  >>  CONFIG_SND_HDSP=''
> >  >>  CONFIG_SND_HDSPM=''
> >  >>  CONFIG_SND_HIFIER=''
> >  >>  CONFIG_SND_HPET=''
> >  >>  CONFIG_SND_HWDEP=''
> >  >>  CONFIG_SND_ICE1712=''
> >  >>  CONFIG_SND_ICE1724=''
> >  >>  CONFIG_SND_INDIGO=''
> >  >>  CONFIG_SND_INDIGODJ=''
> >  >>  CONFIG_SND_INDIGOIO=''
> >  >>  CONFIG_SND_INTEL8X0=''
> >  >>  CONFIG_SND_INTEL8X0M=''
> >  >>  CONFIG_SND_INTERWAVE=''
> >  >>  CONFIG_SND_INTERWAVE_STB=''
> >  >>  CONFIG_SND_KERNELDIR=''
> >  >>  CONFIG_SND_KORG1212=''
> >  >>  CONFIG_SND_KORG1212_FIRMWARE_IN_KERNEL=''
> >  >>  CONFIG_SND_LAYLA20=''
> >  >>  CONFIG_SND_LAYLA24=''
> >  >>  CONFIG_SND_LOOPBACK=''
> >  >>  CONFIG_SND_MAESTRO3=''
> >  >>  CONFIG_SND_MAESTRO3_FIRMWARE_IN_KERNEL=''
> >  >>  CONFIG_SND_MIA=''
> >  >>  CONFIG_SND_MIRO=''
> >  >>  CONFIG_SND_MIXART=''
> >  >>  CONFIG_SND_MIXER_OSS=''
> >  >>  CONFIG_SND_ML403_AC97CR=''
> >  >>  CONFIG_SND_MONA=''
> >  >>  CONFIG_SND_MPU401=''
> >  >>  CONFIG_SND_MPU401_UART=''
> >  >>  CONFIG_SND_MSND_PINNACLE=''
> >  >>  CONFIG_SND_MTPAV=''
> >  >>  CONFIG_SND_MTS64=''
> >  >>  CONFIG_SND_MVERSION=''
> >  >>  CONFIG_SND_NM256=''
> >  >>  CONFIG_SND_OPL3SA2=''
> >  >>  CONFIG_SND_OPL3_LIB=''
> >  >>  CONFIG_SND_OPL4_LIB=''
> >  >>  CONFIG_SND_OPTI92X_AD1848=''
> >  >>  CONFIG_SND_OPTI92X_CS4231=''
> >  >>  CONFIG_SND_OPTI93X=''
> >  >>  CONFIG_SND_OSSEMUL=''
> >  >>  CONFIG_SND_OXYGEN=''
> >  >>  CONFIG_SND_OXYGEN_LIB=''
> >  >>  CONFIG_SND_PC98_CS4232=''
> >  >>  CONFIG_SND_PCM=''
> >  >>  CONFIG_SND_PCM_OSS=''
> >  >>  CONFIG_SND_PCM_OSS_PLUGINS=''
> >  >>  CONFIG_SND_PCM_XRUN_DEBUG=''
> >  >>  CONFIG_SND_PCSP=''
> >  >>  CONFIG_SND_PCXHR=''
> >  >>  CONFIG_SND_PDAUDIOCF=''
> >  >>  CONFIG_SND_PDPLUS=''
> >  >>  CONFIG_SND_PORTMAN2X4=''
> >  >>  CONFIG_SND_POWERMAC=''
> >  >>  CONFIG_SND_POWERMAC_AUTO_DRC=''
> >  >>  CONFIG_SND_PS3=''
> >  >>  CONFIG_SND_PS3_DEFAULT_START_DELAY=''
> >  >>  CONFIG_SND_PXA2XX_AC97=''
> >  >>  CONFIG_SND_PXA2XX_I2SOUND=''
> >  >>  CONFIG_SND_PXA2XX_PCM=''
> >  >>  CONFIG_SND_PXA2XX_SOC=''
> >  >>  CONFIG_SND_PXA2XX_SOC_AC97=''
> >  >>  CONFIG_SND_PXA2XX_SOC_CORGI=''
> >  >>  CONFIG_SND_PXA2XX_SOC_E800=''
> >  >>  CONFIG_SND_PXA2XX_SOC_I2S=''
> >  >>  CONFIG_SND_PXA2XX_SOC_POODLE=''
> >  >>  CONFIG_SND_PXA2XX_SOC_SPITZ=''
> >  >>  CONFIG_SND_PXA2XX_SOC_TOSA=''
> >  >>  CONFIG_SND_RAWMIDI=''
> >  >>  CONFIG_SND_RIPTIDE=''
> >  >>  CONFIG_SND_RME32=''
> >  >>  CONFIG_SND_RME9652=''
> >  >>  CONFIG_SND_RME96=''
> >  >>  CONFIG_SND_RTCTIMER=''
> >  >>  CONFIG_SND_S3C2410=''
> >  >>  CONFIG_SND_S3C2412_SOC_I2S=''
> >  >>  CONFIG_SND_S3C2443_SOC_AC97=''
> >  >>  CONFIG_SND_S3C24XX_SOC=''
> >  >>  CONFIG_SND_S3C24XX_SOC_I2S=''
> >  >>  CONFIG_SND_S3C24XX_SOC_LN2440SBC_ALC650=''
> >  >>  CONFIG_SND_S3C24XX_SOC_NEO1973_WM8753=''
> >  >>  CONFIG_SND_S3C24XX_SOC_SMDK2443_WM9710=''
> >  >>  CONFIG_SND_SA11XX_UDA1341=''
> >  >>  CONFIG_SND_SB16=''
> >  >>  CONFIG_SND_SB16_CSP=''
> >  >>  CONFIG_SND_SB16_CSP_FIRMWARE_IN_KERNEL=''
> >  >>  CONFIG_SND_SB16_DSP=''
> >  >>  CONFIG_SND_SB8=''
> >  >>  CONFIG_SND_SB8_DSP=''
> >  >>  CONFIG_SND_SBAWE=''
> >  >>  CONFIG_SND_SB_COMMON=''
> >  >>  CONFIG_SND_SC6000=''
> >  >>  CONFIG_SND_SEQUENCER=''
> >  >>  CONFIG_SND_SEQUENCER_OSS=''
> >  >>  CONFIG_SND_SEQ_DUMMY=''
> >  >>  CONFIG_SND_SEQ_RTCTIMER_DEFAULT=''
> >  >>  CONFIG_SND_SERIALMIDI=''
> >  >>  CONFIG_SND_SERIAL_U16550=''
> >  >>  CONFIG_SND_SGALAXY=''
> >  >>  CONFIG_SND_SH7760_AC97=''
> >  >>  CONFIG_SND_SIS7019=''
> >  >>  CONFIG_SND_SOC=''
> >  >>  CONFIG_SND_SOC_AC97_BUS=''
> >  >>  CONFIG_SND_SOC_AC97_CODEC=''
> >  >>  CONFIG_SND_SOC_CS4270=''
> >  >>  CONFIG_SND_SOC_CS4270_HWMUTE=''
> >  >>  CONFIG_SND_SOC_CS4270_VD33_ERRATA=''
> >  >>  CONFIG_SND_SOC_MPC8610=''
> >  >>  CONFIG_SND_SOC_MPC8610_HPCD=''
> >  >>  CONFIG_SND_SOC_PCM_SH7760=''
> >  >>  CONFIG_SND_SOC_SH4_HAC=''
> >  >>  CONFIG_SND_SOC_SH4_SSI=''
> >  >>  CONFIG_SND_SOC_TLV320AIC3X=''
> >  >>  CONFIG_SND_SOC_WM8731=''
> >  >>  CONFIG_SND_SOC_WM8750=''
> >  >>  CONFIG_SND_SOC_WM8753=''
> >  >>  CONFIG_SND_SOC_WM9712=''
> >  >>  CONFIG_SND_SONICVIBES=''
> >  >>  CONFIG_SND_SSCAPE=''
> >  >>  CONFIG_SND_SUN_AMD7930=''
> >  >>  CONFIG_SND_SUN_CS4231=''
> >  >>  CONFIG_SND_SUN_DBRI=''
> >  >>  CONFIG_SND_SUPPORT_OLD_API=''
> >  >>  CONFIG_SND_TIMER=''
> >  >>  CONFIG_SND_TRIDENT=''
> >  >>  CONFIG_SND_USB_AUDIO=''
> >  >>  CONFIG_SND_USB_CAIAQ=''
> >  >>  CONFIG_SND_USB_CAIAQ_INPUT=''
> >  >>  CONFIG_SND_USB_USX2Y=''
> >  >>  CONFIG_SND_VERBOSE_PRINTK=''
> >  >>  CONFIG_SND_VERBOSE_PROCFS=''
> >  >>  CONFIG_SND_VERSION='1.0.16'
> >  >>  CONFIG_SND_VIA82XX=''
> >  >>  CONFIG_SND_VIA82XX_MODEM=''
> >  >>  CONFIG_SND_VIRMIDI=''
> >  >>  CONFIG_SND_VIRTUOSO=''
> >  >>  CONFIG_SND_VX222=''
> >  >>  CONFIG_SND_VXPOCKET=''
> >  >>  CONFIG_SND_VX_LIB=''
> >  >>  CONFIG_SND_WAVEFRONT=''
> >  >>  CONFIG_SND_WAVEFRONT_FIRMWARE_IN_KERNEL=''
> >  >>  CONFIG_SND_YMFPCI=''
> >  >>  CONFIG_SND_YMFPCI_FIRMWARE_IN_KERNEL=''
> >  >>  CONFIG_SOC_AU1000=''
> >  >>  CONFIG_SOC_AU1100=''
> >  >>  CONFIG_SOC_AU1500=''
> >  >>  CONFIG_SOUND=''
> >  >>  CONFIG_SOUND_PRIME=''
> >  >>  CONFIG_SPARC32=''
> >  >>  CONFIG_SPARC64=''
> >  >>  CONFIG_SPARC=''
> >  >>  CONFIG_SUPERH64=''
> >  >>  CONFIG_SUPERH=''
> >  >>  CONFIG_USB=''
> >  >>  CONFIG_VIDEO_DEV=''
> >  >>  CONFIG_VIDEO_V4L1=''
> >  >>  CONFIG_X86=''
> >  >>  CONFIG_X86_32=''
> >  >>  CONFIG_X86_64=''
> >  >>  CONFIG_X86_PC9800=''
> >  >>  CONFIG_X86_PC=''
> >  >>  CONFIG_XILINX_VIRTEX=''
> >  >>  CPP=''
> >  >>  CPPFLAGS=''
> >  >>  CROSS_COMPILE=''
> >  >>  DEFS=''
> >  >>  ECHO_C=''
> >  >>  ECHO_N='-n'
> >  >>  ECHO_T=''
> >  >>  EGREP=''
> >  >>  EXEEXT=''
> >  >>  EXTRA_INCLUDES=''
> >  >>  GENKSYMS=''
> >  >>  GREP=''
> >  >>  INSTALL_DATA=''
> >  >>  INSTALL_PROGRAM=''
> >  >>  INSTALL_SCRIPT=''
> >  >>  KERNEL_INC=''
> >  >>  KLD=''
> >  >>  LDFLAGS=''
> >  >>  LIBOBJS=''
> >  >>  LIBS=''
> >  >>  LTLIBOBJS=''
> >  >>  MAKE_ADDS=''
> >  >>  NEW_KBUILD=''
> >  >>  OBJEXT=''
> >  >>  PACKAGE_BUGREPORT=''
> >  >>  PACKAGE_NAME=''
> >  >>  PACKAGE_STRING=''
> >  >>  PACKAGE_TARNAME=''
> >  >>  PACKAGE_VERSION=''
> >  >>  PATH_SEPARATOR=':'
> >  >>  RANLIB=''
> >  >>  SHELL='/bin/bash'
> >  >>  SRCDIR=''
> >  >>  ac_ct_CC='gcc'
> >  >>  bindir='${exec_prefix}/bin'
> >  >>  build_alias=''
> >  >>  c_opts=''
> >  >>  datadir='${datarootdir}'
> >  >>  datarootdir='${prefix}/share'
> >  >>  docdir='${datarootdir}/doc/${PACKAGE}'
> >  >>  dvidir='${docdir}'
> >  >>  exec_prefix='NONE'
> >  >>  host_alias=''
> >  >>  htmldir='${docdir}'
> >  >>  includedir='${prefix}/include'
> >  >>  infodir='${datarootdir}/info'
> >  >>  kaversion=''
> >  >>  kextraversion=''
> >  >>  kpatchlevel=''
> >  >>  ksublevel=''
> >  >>  kversion=''
> >  >>  libdir='${exec_prefix}/lib'
> >  >>  libexecdir='${exec_prefix}/libexec'
> >  >>  localedir='${datarootdir}/locale'
> >  >>  localstatedir='${prefix}/var'
> >  >>  m_opts=''
> >  >>  mandir='${datarootdir}/man'
> >  >>  moddir=''
> >  >>  moddir_tree=''
> >  >>  modsubdir=''
> >  >>  msmp=''
> >  >>  oldincludedir='/usr/include'
> >  >>  pdfdir='${docdir}'
> >  >>  prefix='NONE'
> >  >>  processor=''
> >  >>  program_transform_name='s,x,x,'
> >  >>  psdir='${docdir}'
> >  >>  sbindir='${exec_prefix}/sbin'
> >  >>  sharedstatedir='${prefix}/com'
> >  >>  sysconfdir='${prefix}/etc'
> >  >>  target_alias=''
> >  >>
> >  >>  ## ----------- ##
> >  >>  ## confdefs.h. ##
> >  >>  ## ----------- ##
> >  >>
> >  >>  #define PACKAGE_NAME ""
> >  >>  #define PACKAGE_TARNAME ""
> >  >>  #define PACKAGE_VERSION ""
> >  >>  #define PACKAGE_STRING ""
> >  >>  #define PACKAGE_BUGREPORT ""
> >  >>
> >  >>  configure: exit 77
> >  >>
> >  >>
> >  >>
> >  >
> >  >
> >
> >
> > anita@anitas-computer:~$ which ld
> >  /usr/bin/ld
> >  anita@anitas-computer:~$ cd /usr/src/modules/alsa/alsa-driver-1.0.16
>
>
>
> >  anita@anitas-computer:/usr/src/modules/alsa/alsa-driver-1.0.16$ HEADERS=/lib/modules/2.6.20-15-generic/build
> >  anita@anitas-computer:/usr/src/modules/alsa/alsa-driver-1.0.16$ ls $HEADERS
> >  arch     fs       kernel    Module.symvers  sound
> >  block    include  lib       net             ubuntu
> >  crypto   init     Makefile  scripts         usr
> >  drivers  ipc      mm        security
> >  anita@anitas-computer:/usr/src/modules/alsa/alsa-driver-1.0.16$ ./configure --with-kernel=$HEADERS --with-build=$HEADERS --with-cards=hda-intel
> >  checking for gcc... gcc
> >  checking for C compiler default output file name... configure: error: C compiler cannot create executables
> >  See `config.log' for more details.
> >  anita@anitas-computer:/usr/src/modules/alsa/alsa-driver-1.0.16$ gedit config.log
> >  anita@anitas-computer:/usr/src/modules/alsa/alsa-driver-1.0.16$
> >
> >
> > This file contains any messages produced by compilers while
> >  running configure, to aid debugging if configure makes a mistake.
> >
> >  It was created by configure, which was
> >  generated by GNU Autoconf 2.60.  Invocation command line was
> >
> >   $ ./configure --with-kernel=/lib/modules/2.6.20-15-generic/build --with-build=/lib/modules/2.6.20-15-generic/build --with-cards=hda-intel
> >
> >  ## --------- ##
> >  ## Platform. ##
> >  ## --------- ##
> >
> >  hostname = anitas-computer
> >  uname -m = i686
> >  uname -r = 2.6.20-15-generic
> >  uname -s = Linux
> >  uname -v = #2 SMP Sun Apr 15 07:36:31 UTC 2007
> >
> >  /usr/bin/uname -p = unknown
> >  /bin/uname -X     = unknown
> >
> >  /bin/arch              = i686
> >  /usr/bin/arch -k       = unknown
> >  /usr/convex/getsysinfo = unknown
> >  /usr/bin/hostinfo      = unknown
> >  /bin/machine           = unknown
> >  /usr/bin/oslevel       = unknown
> >  /bin/universe          = unknown
> >
> >  PATH: /usr/local/sbin
> >  PATH: /usr/local/bin
> >  PATH: /usr/sbin
> >  PATH: /usr/bin
> >  PATH: /sbin
> >  PATH: /bin
> >  PATH: /usr/games
> >
> >
> >  ## ----------- ##
> >  ## Core tests. ##
> >  ## ----------- ##
> >
> >  configure:2101: checking for gcc
> >  configure:2117: found /usr/bin/gcc
> >  configure:2128: result: gcc
> >  configure:2366: checking for C compiler version
> >  configure:2373: gcc --version >&5
> >  gcc (GCC) 4.1.2 (Ubuntu 4.1.2-0ubuntu4)
> >  Copyright (C) 2006 Free Software Foundation, Inc.
> >  This is free software; see the source for copying conditions.  There is NO
> >  warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
> >
> >  configure:2376: $? = 0
> >  configure:2383: gcc -v >&5
> >  Using built-in specs.
> >  Target: i486-linux-gnu
> >  Configured with: ../src/configure -v --enable-languages=c,c++,fortran,objc,obj-c++,treelang --prefix=/usr --enable-shared --with-system-zlib --libexecdir=/usr/lib --without-included-gettext --enable-threads=posix --enable-nls --program-suffix=-4.1 --enable-__cxa_atexit --enable-clocale=gnu --enable-libstdcxx-debug --enable-mpfr --enable-checking=release i486-linux-gnu
> >  Thread model: posix
> >  gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)
> >  configure:2386: $? = 0
> >  configure:2393: gcc -V >&5
> >  gcc: '-V' option must have argument
> >  configure:2396: $? = 1
> >  configure:2419: checking for C compiler default output file name
> >  configure:2446: gcc    conftest.c  >&5
> >  /usr/bin/ld: crt1.o: No such file: No such file or directory
> >  collect2: ld returned 1 exit status
> >  configure:2449: $? = 1
> >  configure: failed program was:
> >  | /* confdefs.h.  */
> >  | #define PACKAGE_NAME ""
> >  | #define PACKAGE_TARNAME ""
> >  | #define PACKAGE_VERSION ""
> >  | #define PACKAGE_STRING ""
> >  | #define PACKAGE_BUGREPORT ""
> >  | /* end confdefs.h.  */
> >  |
> >  | int
> >  | main ()
> >  | {
> >  |
> >  |   ;
> >  |   return 0;
> >  | }
> >  configure:2488: error: C compiler cannot create executables
> >  See `config.log' for more details.
> >
> >  ## ---------------- ##
> >  ## Cache variables. ##
> >  ## ---------------- ##
> >
> >  ac_cv_env_CC_set=
> >  ac_cv_env_CC_value=
> >  ac_cv_env_CFLAGS_set=
> >  ac_cv_env_CFLAGS_value=
> >  ac_cv_env_CPPFLAGS_set=
> >  ac_cv_env_CPPFLAGS_value=
> >  ac_cv_env_CPP_set=
> >  ac_cv_env_CPP_value=
> >  ac_cv_env_LDFLAGS_set=
> >  ac_cv_env_LDFLAGS_value=
> >  ac_cv_env_build_alias_set=
> >  ac_cv_env_build_alias_value=
> >  ac_cv_env_host_alias_set=
> >  ac_cv_env_host_alias_value=
> >  ac_cv_env_target_alias_set=
> >  ac_cv_env_target_alias_value=
> >  ac_cv_prog_ac_ct_CC=gcc
> >
> >  ## ----------------- ##
> >  ## Output variables. ##
> >  ## ----------------- ##
> >
> >  AR=''
> >  ARCH=''
> >  AS=''
> >  CC='gcc'
> >  CFLAGS=''
> >  CONFIG_AC97_BUS=''
> >  CONFIG_ALPHA=''
> >  CONFIG_ARCH_AT91=''
> >  CONFIG_ARCH_PXA=''
> >  CONFIG_ARCH_S3C2410=''
> >  CONFIG_ARCH_SA1100=''
> >  CONFIG_ARM=''
> >  CONFIG_ARM_AMBA=''
> >  CONFIG_ATMEL_SSC=''
> >  CONFIG_BROKEN=''
> >  CONFIG_CPU_SUBTYPE_SH7760=''
> >  CONFIG_EXPERIMENTAL=''
> >  CONFIG_FW_LOADER=''
> >  CONFIG_GSC=''
> >  CONFIG_HAS_DMA=''
> >  CONFIG_HAS_IOMEM=''
> >  CONFIG_HAS_IOPORT=''
> >  CONFIG_HIGH_RES_TIMERS=''
> >  CONFIG_HPET=''
> >  CONFIG_I2C=''
> >  CONFIG_I2C_POWERMAC=''
> >  CONFIG_I2C_SENSOR=''
> >  CONFIG_INPUT=''
> >  CONFIG_ISA=''
> >  CONFIG_ISAPNP=''
> >  CONFIG_ISAPNP_KERNEL=''
> >  CONFIG_ISA_DMA_API=''
> >  CONFIG_L3=''
> >  CONFIG_MACH_E800=''
> >  CONFIG_MACH_ETI_B1=''
> >  CONFIG_MACH_ETI_C1=''
> >  CONFIG_MACH_NEO1973_GTA01=''
> >  CONFIG_MACH_POODLE=''
> >  CONFIG_MACH_SMDK2443=''
> >  CONFIG_MACH_TOSA=''
> >  CONFIG_MIPS=''
> >  CONFIG_MPC8610_HPCD=''
> >  CONFIG_PARISC=''
> >  CONFIG_PARPORT=''
> >  CONFIG_PCI=''
> >  CONFIG_PCMCIA=''
> >  CONFIG_PM=''
> >  CONFIG_PNP=''
> >  CONFIG_PNP_KERNEL=''
> >  CONFIG_PPC32=''
> >  CONFIG_PPC64=''
> >  CONFIG_PPC=''
> >  CONFIG_PPC_PMAC=''
> >  CONFIG_PROC_FS=''
> >  CONFIG_PS3_PS3AV=''
> >  CONFIG_PXA_SHARP_C7XX=''
> >  CONFIG_PXA_SHARP_CXX00=''
> >  CONFIG_RTC=''
> >  CONFIG_SBUS=''
> >  CONFIG_SGI=''
> >  CONFIG_SH_DMABRG=''
> >  CONFIG_SH_DREAMCAST=''
> >  CONFIG_SND=''
> >  CONFIG_SND_AC97_CODEC=''
> >  CONFIG_SND_AC97_POWER_SAVE=''
> >  CONFIG_SND_AC97_POWER_SAVE_DEFAULT=''
> >  CONFIG_SND_AD1816A=''
> >  CONFIG_SND_AD1848=''
> >  CONFIG_SND_AD1848_LIB=''
> >  CONFIG_SND_AD1889=''
> >  CONFIG_SND_ADLIB=''
> >  CONFIG_SND_AICA=''
> >  CONFIG_SND_ALI5451=''
> >  CONFIG_SND_ALS100=''
> >  CONFIG_SND_ALS300=''
> >  CONFIG_SND_ALS4000=''
> >  CONFIG_SND_AOA=''
> >  CONFIG_SND_AOA_FABRIC_LAYOUT=''
> >  CONFIG_SND_AOA_ONYX=''
> >  CONFIG_SND_AOA_SOUNDBUS=''
> >  CONFIG_SND_AOA_SOUNDBUS_I2S=''
> >  CONFIG_SND_AOA_TAS=''
> >  CONFIG_SND_AOA_TOONIE=''
> >  CONFIG_SND_ARMAACI=''
> >  CONFIG_SND_ASIHPI=''
> >  CONFIG_SND_AT73C213=''
> >  CONFIG_SND_AT73C213_TARGET_BITRATE=''
> >  CONFIG_SND_AT91_SOC=''
> >  CONFIG_SND_AT91_SOC_ETI_B1_WM8731=''
> >  CONFIG_SND_AT91_SOC_ETI_SLAVE=''
> >  CONFIG_SND_AT91_SOC_SSC=''
> >  CONFIG_SND_ATIIXP=''
> >  CONFIG_SND_ATIIXP_MODEM=''
> >  CONFIG_SND_AU1X00=''
> >  CONFIG_SND_AU8810=''
> >  CONFIG_SND_AU8820=''
> >  CONFIG_SND_AU8830=''
> >  CONFIG_SND_AZT2320=''
> >  CONFIG_SND_AZT3328=''
> >  CONFIG_SND_BIT32_EMUL=''
> >  CONFIG_SND_BT87X=''
> >  CONFIG_SND_BT87X_OVERCLOCK=''
> >  CONFIG_SND_CA0106=''
> >  CONFIG_SND_CMI8330=''
> >  CONFIG_SND_CMIPCI=''
> >  CONFIG_SND_CS4231=''
> >  CONFIG_SND_CS4231_LIB=''
> >  CONFIG_SND_CS4232=''
> >  CONFIG_SND_CS4236=''
> >  CONFIG_SND_CS4281=''
> >  CONFIG_SND_CS46XX=''
> >  CONFIG_SND_CS46XX_NEW_DSP=''
> >  CONFIG_SND_CS5530=''
> >  CONFIG_SND_CS5535AUDIO=''
> >  CONFIG_SND_DARLA20=''
> >  CONFIG_SND_DARLA24=''
> >  CONFIG_SND_DATE=''
> >  CONFIG_SND_DEBUG=''
> >  CONFIG_SND_DEBUG_DETECT=''
> >  CONFIG_SND_DEBUG_MEMORY=''
> >  CONFIG_SND_DT019X=''
> >  CONFIG_SND_DUMMY=''
> >  CONFIG_SND_DYNAMIC_MINORS=''
> >  CONFIG_SND_ECHO3G=''
> >  CONFIG_SND_EMU10K1=''
> >  CONFIG_SND_EMU10K1X=''
> >  CONFIG_SND_ENS1370=''
> >  CONFIG_SND_ENS1371=''
> >  CONFIG_SND_ES1688=''
> >  CONFIG_SND_ES18XX=''
> >  CONFIG_SND_ES1938=''
> >  CONFIG_SND_ES1968=''
> >  CONFIG_SND_ES968=''
> >  CONFIG_SND_FM801=''
> >  CONFIG_SND_FM801_TEA575X=''
> >  CONFIG_SND_FM801_TEA575X_BOOL=''
> >  CONFIG_SND_GINA20=''
> >  CONFIG_SND_GINA24=''
> >  CONFIG_SND_GUSCLASSIC=''
> >  CONFIG_SND_GUSEXTREME=''
> >  CONFIG_SND_GUSMAX=''
> >  CONFIG_SND_GUS_SYNTH=''
> >  CONFIG_SND_HARMONY=''
> >  CONFIG_SND_HDA_CODEC_ANALOG=''
> >  CONFIG_SND_HDA_CODEC_ATIHDMI=''
> >  CONFIG_SND_HDA_CODEC_CMEDIA=''
> >  CONFIG_SND_HDA_CODEC_CONEXANT=''
> >  CONFIG_SND_HDA_CODEC_REALTEK=''
> >  CONFIG_SND_HDA_CODEC_SI3054=''
> >  CONFIG_SND_HDA_CODEC_SIGMATEL=''
> >  CONFIG_SND_HDA_CODEC_VIA=''
> >  CONFIG_SND_HDA_GENERIC=''
> >  CONFIG_SND_HDA_HWDEP=''
> >  CONFIG_SND_HDA_INTEL=''
> >  CONFIG_SND_HDA_POWER_SAVE=''
> >  CONFIG_SND_HDA_POWER_SAVE_DEFAULT=''
> >  CONFIG_SND_HDSP=''
> >  CONFIG_SND_HDSPM=''
> >  CONFIG_SND_HIFIER=''
> >  CONFIG_SND_HPET=''
> >  CONFIG_SND_HWDEP=''
> >  CONFIG_SND_ICE1712=''
> >  CONFIG_SND_ICE1724=''
> >  CONFIG_SND_INDIGO=''
> >  CONFIG_SND_INDIGODJ=''
> >  CONFIG_SND_INDIGOIO=''
> >  CONFIG_SND_INTEL8X0=''
> >  CONFIG_SND_INTEL8X0M=''
> >  CONFIG_SND_INTERWAVE=''
> >  CONFIG_SND_INTERWAVE_STB=''
> >  CONFIG_SND_KERNELDIR=''
> >  CONFIG_SND_KORG1212=''
> >  CONFIG_SND_KORG1212_FIRMWARE_IN_KERNEL=''
> >  CONFIG_SND_LAYLA20=''
> >  CONFIG_SND_LAYLA24=''
> >  CONFIG_SND_LOOPBACK=''
> >  CONFIG_SND_MAESTRO3=''
> >  CONFIG_SND_MAESTRO3_FIRMWARE_IN_KERNEL=''
> >  CONFIG_SND_MIA=''
> >  CONFIG_SND_MIRO=''
> >  CONFIG_SND_MIXART=''
> >  CONFIG_SND_MIXER_OSS=''
> >  CONFIG_SND_ML403_AC97CR=''
> >  CONFIG_SND_MONA=''
> >  CONFIG_SND_MPU401=''
> >  CONFIG_SND_MPU401_UART=''
> >  CONFIG_SND_MSND_PINNACLE=''
> >  CONFIG_SND_MTPAV=''
> >  CONFIG_SND_MTS64=''
> >  CONFIG_SND_MVERSION=''
> >  CONFIG_SND_NM256=''
> >  CONFIG_SND_OPL3SA2=''
> >  CONFIG_SND_OPL3_LIB=''
> >  CONFIG_SND_OPL4_LIB=''
> >  CONFIG_SND_OPTI92X_AD1848=''
> >  CONFIG_SND_OPTI92X_CS4231=''
> >  CONFIG_SND_OPTI93X=''
> >  CONFIG_SND_OSSEMUL=''
> >  CONFIG_SND_OXYGEN=''
> >  CONFIG_SND_OXYGEN_LIB=''
> >  CONFIG_SND_PC98_CS4232=''
> >  CONFIG_SND_PCM=''
> >  CONFIG_SND_PCM_OSS=''
> >  CONFIG_SND_PCM_OSS_PLUGINS=''
> >  CONFIG_SND_PCM_XRUN_DEBUG=''
> >  CONFIG_SND_PCSP=''
> >  CONFIG_SND_PCXHR=''
> >  CONFIG_SND_PDAUDIOCF=''
> >  CONFIG_SND_PDPLUS=''
> >  CONFIG_SND_PORTMAN2X4=''
> >  CONFIG_SND_POWERMAC=''
> >  CONFIG_SND_POWERMAC_AUTO_DRC=''
> >  CONFIG_SND_PS3=''
> >  CONFIG_SND_PS3_DEFAULT_START_DELAY=''
> >  CONFIG_SND_PXA2XX_AC97=''
> >  CONFIG_SND_PXA2XX_I2SOUND=''
> >  CONFIG_SND_PXA2XX_PCM=''
> >  CONFIG_SND_PXA2XX_SOC=''
> >  CONFIG_SND_PXA2XX_SOC_AC97=''
> >  CONFIG_SND_PXA2XX_SOC_CORGI=''
> >  CONFIG_SND_PXA2XX_SOC_E800=''
> >  CONFIG_SND_PXA2XX_SOC_I2S=''
> >  CONFIG_SND_PXA2XX_SOC_POODLE=''
> >  CONFIG_SND_PXA2XX_SOC_SPITZ=''
> >  CONFIG_SND_PXA2XX_SOC_TOSA=''
> >  CONFIG_SND_RAWMIDI=''
> >  CONFIG_SND_RIPTIDE=''
> >  CONFIG_SND_RME32=''
> >  CONFIG_SND_RME9652=''
> >  CONFIG_SND_RME96=''
> >  CONFIG_SND_RTCTIMER=''
> >  CONFIG_SND_S3C2410=''
> >  CONFIG_SND_S3C2412_SOC_I2S=''
> >  CONFIG_SND_S3C2443_SOC_AC97=''
> >  CONFIG_SND_S3C24XX_SOC=''
> >  CONFIG_SND_S3C24XX_SOC_I2S=''
> >  CONFIG_SND_S3C24XX_SOC_LN2440SBC_ALC650=''
> >  CONFIG_SND_S3C24XX_SOC_NEO1973_WM8753=''
> >  CONFIG_SND_S3C24XX_SOC_SMDK2443_WM9710=''
> >  CONFIG_SND_SA11XX_UDA1341=''
> >  CONFIG_SND_SB16=''
> >  CONFIG_SND_SB16_CSP=''
> >  CONFIG_SND_SB16_CSP_FIRMWARE_IN_KERNEL=''
> >  CONFIG_SND_SB16_DSP=''
> >  CONFIG_SND_SB8=''
> >  CONFIG_SND_SB8_DSP=''
> >  CONFIG_SND_SBAWE=''
> >  CONFIG_SND_SB_COMMON=''
> >  CONFIG_SND_SC6000=''
> >  CONFIG_SND_SEQUENCER=''
> >  CONFIG_SND_SEQUENCER_OSS=''
> >  CONFIG_SND_SEQ_DUMMY=''
> >  CONFIG_SND_SEQ_RTCTIMER_DEFAULT=''
> >  CONFIG_SND_SERIALMIDI=''
> >  CONFIG_SND_SERIAL_U16550=''
> >  CONFIG_SND_SGALAXY=''
> >  CONFIG_SND_SH7760_AC97=''
> >  CONFIG_SND_SIS7019=''
> >  CONFIG_SND_SOC=''
> >  CONFIG_SND_SOC_AC97_BUS=''
> >  CONFIG_SND_SOC_AC97_CODEC=''
> >  CONFIG_SND_SOC_CS4270=''
> >  CONFIG_SND_SOC_CS4270_HWMUTE=''
> >  CONFIG_SND_SOC_CS4270_VD33_ERRATA=''
> >  CONFIG_SND_SOC_MPC8610=''
> >  CONFIG_SND_SOC_MPC8610_HPCD=''
> >  CONFIG_SND_SOC_PCM_SH7760=''
> >  CONFIG_SND_SOC_SH4_HAC=''
> >  CONFIG_SND_SOC_SH4_SSI=''
> >  CONFIG_SND_SOC_TLV320AIC3X=''
> >  CONFIG_SND_SOC_WM8731=''
> >  CONFIG_SND_SOC_WM8750=''
> >  CONFIG_SND_SOC_WM8753=''
> >  CONFIG_SND_SOC_WM9712=''
> >  CONFIG_SND_SONICVIBES=''
> >  CONFIG_SND_SSCAPE=''
> >  CONFIG_SND_SUN_AMD7930=''
> >  CONFIG_SND_SUN_CS4231=''
> >  CONFIG_SND_SUN_DBRI=''
> >  CONFIG_SND_SUPPORT_OLD_API=''
> >  CONFIG_SND_TIMER=''
> >  CONFIG_SND_TRIDENT=''
> >  CONFIG_SND_USB_AUDIO=''
> >  CONFIG_SND_USB_CAIAQ=''
> >  CONFIG_SND_USB_CAIAQ_INPUT=''
> >  CONFIG_SND_USB_USX2Y=''
> >  CONFIG_SND_VERBOSE_PRINTK=''
> >  CONFIG_SND_VERBOSE_PROCFS=''
> >  CONFIG_SND_VERSION='1.0.16'
> >  CONFIG_SND_VIA82XX=''
> >  CONFIG_SND_VIA82XX_MODEM=''
> >  CONFIG_SND_VIRMIDI=''
> >  CONFIG_SND_VIRTUOSO=''
> >  CONFIG_SND_VX222=''
> >  CONFIG_SND_VXPOCKET=''
> >  CONFIG_SND_VX_LIB=''
> >  CONFIG_SND_WAVEFRONT=''
> >  CONFIG_SND_WAVEFRONT_FIRMWARE_IN_KERNEL=''
> >  CONFIG_SND_YMFPCI=''
> >  CONFIG_SND_YMFPCI_FIRMWARE_IN_KERNEL=''
> >  CONFIG_SOC_AU1000=''
> >  CONFIG_SOC_AU1100=''
> >  CONFIG_SOC_AU1500=''
> >  CONFIG_SOUND=''
> >  CONFIG_SOUND_PRIME=''
> >  CONFIG_SPARC32=''
> >  CONFIG_SPARC64=''
> >  CONFIG_SPARC=''
> >  CONFIG_SUPERH64=''
> >  CONFIG_SUPERH=''
> >  CONFIG_USB=''
> >  CONFIG_VIDEO_DEV=''
> >  CONFIG_VIDEO_V4L1=''
> >  CONFIG_X86=''
> >  CONFIG_X86_32=''
> >  CONFIG_X86_64=''
> >  CONFIG_X86_PC9800=''
> >  CONFIG_X86_PC=''
> >  CONFIG_XILINX_VIRTEX=''
> >  CPP=''
> >  CPPFLAGS=''
> >  CROSS_COMPILE=''
> >  DEFS=''
> >  ECHO_C=''
> >  ECHO_N='-n'
> >  ECHO_T=''
> >  EGREP=''
> >  EXEEXT=''
> >  EXTRA_INCLUDES=''
> >  GENKSYMS=''
> >  GREP=''
> >  INSTALL_DATA=''
> >  INSTALL_PROGRAM=''
> >  INSTALL_SCRIPT=''
> >  KERNEL_INC=''
> >  KLD=''
> >  LDFLAGS=''
> >  LIBOBJS=''
> >  LIBS=''
> >  LTLIBOBJS=''
> >  MAKE_ADDS=''
> >  NEW_KBUILD=''
> >  OBJEXT=''
> >  PACKAGE_BUGREPORT=''
> >  PACKAGE_NAME=''
> >  PACKAGE_STRING=''
> >  PACKAGE_TARNAME=''
> >  PACKAGE_VERSION=''
> >  PATH_SEPARATOR=':'
> >  RANLIB=''
> >  SHELL='/bin/bash'
> >  SRCDIR=''
> >  ac_ct_CC='gcc'
> >  bindir='${exec_prefix}/bin'
> >  build_alias=''
> >  c_opts=''
> >  datadir='${datarootdir}'
> >  datarootdir='${prefix}/share'
> >  docdir='${datarootdir}/doc/${PACKAGE}'
> >  dvidir='${docdir}'
> >  exec_prefix='NONE'
> >  host_alias=''
> >  htmldir='${docdir}'
> >  includedir='${prefix}/include'
> >  infodir='${datarootdir}/info'
> >  kaversion=''
> >  kextraversion=''
> >  kpatchlevel=''
> >  ksublevel=''
> >  kversion=''
> >  libdir='${exec_prefix}/lib'
> >  libexecdir='${exec_prefix}/libexec'
> >  localedir='${datarootdir}/locale'
> >  localstatedir='${prefix}/var'
> >  m_opts=''
> >  mandir='${datarootdir}/man'
> >  moddir=''
> >  moddir_tree=''
> >  modsubdir=''
> >  msmp=''
> >  oldincludedir='/usr/include'
> >  pdfdir='${docdir}'
> >  prefix='NONE'
> >  processor=''
> >  program_transform_name='s,x,x,'
> >  psdir='${docdir}'
> >  sbindir='${exec_prefix}/sbin'
> >  sharedstatedir='${prefix}/com'
> >  sysconfdir='${prefix}/etc'
> >  target_alias=''
> >
> >  ## ----------- ##
> >  ## confdefs.h. ##
> >  ## ----------- ##
> >
> >  #define PACKAGE_NAME ""
> >  #define PACKAGE_TARNAME ""
> >  #define PACKAGE_VERSION ""
> >  #define PACKAGE_STRING ""
> >  #define PACKAGE_BUGREPORT ""
> >
> >  configure: exit 77
> >
> >
>

[Index of Archives]     [Linux Media Development]     [Asterisk]     [DCCP]     [Netdev]     [X.org]     [Xfree86]     [Fedora Women]     [Linux USB]

  Powered by Linux