I followed your suggestions, Marvin.
The results as shown by the terminal are attached.
Also I am not running slmodemd during this process.
Should I be?
Thanks,
Anita.
Marvin Stodolsky wrote:
> Anita
>
> RE: accepted location for compiling.
> You could also have worked in your personal /home/User/ folder.
> But the / folder on any folder with SYSTEm files should not be used.
>
> WHAT=something
> are created in memory space, and can be called/used from any folder.
> They can be displayed by:
> $ echo $WHAT
> WHAT=something
>
> Do a precautionary (assuming LoginName is anita)
> $ sudo chown -R anita:anita /usr/src/modules
> Then try the configure command again. Output on my SYstem is shown below
> If there is a failure, what is the output of
> $ ls -l /usr/bin/gcc*
>
> MarvS
> -------------------------------------------
>
> marv@marvdesk:/usr/src/modules/alsa-1.0.15/alsa-driver-1.0.15$
> ./configure --with-kernel=$HEADERS --with-build=$HEADERS
> --with-cards=hda-intel
> checking for gcc... gcc
> checking for C compiler default output file name... a.out
> checking whether the C compiler works... yes
> checking whether we are cross compiling... no
> checking for suffix of executables...
> checking for suffix of object files... o
> checking whether we are using the GNU C compiler... yes
> checking whether gcc accepts -g... yes
> checking for gcc option to accept ISO C89... none needed
> checking for ranlib... ranlib
> checking for a BSD-compatible install... /usr/bin/install -c
> checking how to run the C preprocessor... gcc -E
> checking for grep that handles long lines and -e... /bin/grep
> checking for egrep... /bin/grep -E
> checking for ANSI C header files... yes
> checking for an ANSI C-conforming const... yes
> checking for inline... inline
> checking whether time.h and sys/time.h may both be included... yes
> checking whether gcc needs -traditional... no
> checking for current directory...
> /usr/src/modules/alsa-1.0.15/alsa-driver-1.0.15
> checking cross compile...
> checking for directory with kernel source...
> /lib/modules/2.6.22-14-generic/build
> checking for directory with kernel build... /lib/modules/2.6.22-14-generic/build
> checking for kernel linux/version.h... yes
> checking for kernel linux/autoconf.h... yes
> checking for kernel version... 2.6.22-14-generic
> checking for GCC version... Kernel compiler: Used compiler: gcc (GCC)
> 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)
> checking for built-in ALSA... no
> checking for existing ALSA module... yes
> checking for Red Hat kernel... auto
> checking for Red Hat kernel... no
> checking for SUSE kernel... auto
> checking for SUSE kernel... no
> checking for CONFIG_EXPERIMENTAL... yes
> checking for kernel linux/config.h... no
> Creating <linux/config.h>...
> checking to modify of kernel linux/kmod.h... no
> checking for kernel linux/utsrelease.h... yes
> checking for kernel linux/compiler.h... yes
> checking for kernel linux/pm.h... yes
> checking for kernel linux/spinlock.h... yes
> checking for kernel linux/irq.h... yes
> checking for kernel linux/threads.h... yes
> checking for kernel linux/rwsem.h... yes
> checking for kernel linux/gameport.h... yes
> checking for kernel media/v4l2-dev.h... yes
> checking for kernel linux/devfs_fs_kernel.h... no
> Creating a dummy <linux/devfs_fs_kernel.h>...
> checking for kernel linux/highmem.h... yes
> checking for kernel linux/workqueue.h... yes
> checking for kernel linux/dma-mapping.h... yes
> checking for kernel asm/hw_irq.h... yes
> checking for kernel linux/device.h... yes
> checking for kernel linux/platform_device.h... yes
> checking for kernel linux/isa.h... yes
> checking for kernel linux/jiffies.h... yes
> checking for kernel linux/compat.h... yes
> checking for kernel linux/log2.h... yes
> checking for kernel linux/adb.h... yes
> checking for kernel linux/cuda.h... yes
> checking for kernel linux/pmu.h... yes
> checking for kernel linux/moduleparam.h... yes
> checking for kernel linux/syscalls.h... yes
> checking for kernel linux/firmware.h... yes
> checking for kernel linux/err.h... yes
> checking for kernel linux/bitmap.h... yes
> checking for kernel linux/mutex.h... yes
> checking for kernel linux/latency.h... yes
> checking for kernel linux/kthread.h... yes
> checking for kernel asm/irq_regs.h... yes
> checking for kernel module symbol versions... yes
> checking for has ioport support... yes
> checking for PCI support in kernel... yes
> checking for I2C driver in kernel... module
> checking for I2C_POWERMAC in kernel... unknown
> checking for firmware loader... yes
> checking for input subsystem in kernel... yes
> checking for directory to store kernel modules...
> /lib/modules/2.6.22-14-generic/kernel/sound
> checking for verbose procfs... on
> checking for verbose printk... on
> checking for debug level... none
> checking for ISA support in kernel... yes
> checking for processor type... i586
> checking for i386 machine type... default
> checking for ISA DMA API... yes
> checking for SMP... yes
> checking for Video device support in kernel... yes
> checking for ISA PnP driver in kernel... yes
> checking for PnP driver in kernel... yes
> checking for Kernel ISA-PnP support... yes
> checking for strlcpy... yes
> checking for snprintf... yes
> checking for vsnprintf... yes
> checking for scnprintf... yes
> checking for sscanf... yes
> checking for vmalloc_to_page... yes
> checking for old kmod... no
> checking for PDE... yes
> checking for pci_set_consistent_dma_mask... yes
> checking for pci_dev_present... yes
> checking for msleep... yes
> checking for msleep_interrupt... yes
> checking for msecs_to_jiffies... yes
> checking for tty->count is the atomic type... no
> checking for video_get_drvdata... yes
> checking for V4L1 layer... yes
> checking for io_remap_pfn_range... yes
> checking for kcalloc... yes
> checking for kstrdup... yes
> checking for kzalloc... yes
> checking for create_workqueue with flags... no
> checking for saved_config_space in pci_dev... yes
> checking for new pci_save_state... yes
> checking for register_sound_special_device... yes
> checking for driver version... 1.0.15
> checking for sequencer support... yes
> checking for OSS/Free emulation... yes
> checking for OSS PCM plugin system inclusion... yes
> checking for RTC callback support in kernel... yes
> checking for HPET support... yes
> checking for dynamic minor numbers... no
> checking for support of old API... yes
> checking for Procfs support... yes
> checking for USB support... yes
> checking for class_simple... no
> checking for old driver suspend/resume callbacks... no
> checking for removal of page-reservation for nopage/mmap... yes
> checking for nested class_device... yes
> checking for new IRQ handler... yes
> checking for gfp_t... yes
> checking for PnP suspend/resume... yes
> checking for new unlocked/compat_ioctl... yes
> checking for x86-compatible PC... yes
> checking for High-Res timers... yes
> checking for kernel PCMCIA
> checking for PCMCIA support... yes
> checking for PC9800 support in kernel... no
> checking for parallel port support... yes
> checking for power management... yes
> checking for which soundcards to compile driver for... hda-intel
> configure: creating ./config.status
> config.status: creating version
> config.status: creating Makefile.conf
> config.status: WARNING: Makefile.conf.in seems to ignore the
> --datarootdir setting
> config.status: creating snddevices
> config.status: creating utils/alsa-driver.spec
> config.status: creating utils/buildrpm
> config.status: creating toplevel.config
> config.status: creating utils/alsasound
> config.status: creating utils/alsasound.posix
> config.status: creating include/pci_ids_compat.h
> config.status: creating include/i2c-id_compat.h
> config.status: creating include/config.h
> config.status: creating include/config1.h
> config.status: creating include/version.h
> config.status: include/version.h is unchanged
> config.status: creating include/autoconf-extra.h
> config.status: include/autoconf-extra.h is unchanged
> Hacking autoconf.h...
> marv@marvdesk:/usr/src/modules/alsa-1.0.15/alsa-driver-1.0.15$
>
>
>
> On Sat, Mar 8, 2008 at 12:22 PM, Anita Kuno <ay.kuno@xxxxxxxxx> wrote:
>
>> Thank you, Marvin for providing me with the information about the
>> accepted location for compiling.
>> Your email was the first I had heard of it.
>>
>> I see that in this email the creation of HEADERS takes place within the
>> alsa-driver-1.0.16 directory,
>> whereas yesterday your email stated that I should create HEADERS whilst
>> in the alsa folder and then move into
>> the alsa-driver-1.0.16 directory. Since it is referencing an absolute
>> path, I am assuming that the location where
>> it is created is not of much importance, but I did notice a difference.
>>
>> You will find a terminal log from my latest attempt attached. I didn't
>> bother with the config.log
>> this time, but if that is of importance, I can include that as well next
>> time.
>>
>>
>>
>> Thanks,
>> Anita.
>>
>>
>>
>> Marvin Stodolsky wrote:
>> > Anita,
>> > Uninstall the sl-modem-daemon package. It only provides some automation.
>> > It is Not useful for your HDA modem at this stage and will only confuse issues.
>> >
>> > Your problem below is that you are trying to work in the root "/"
>> > partition and that is illegal under Unix/Linux
>> > The standard position for compiling stuff is in sub-folders of
>> > /usr/src/modules. So
>> > $ sudo mkdir -p /usr/src/modules
>> > $ sudo mv /alsa /usr/src/modules/
>> > $ chown -R anita:anita /usr/src/modules
>> > gives anita to work therein without "sudo"
>> > $ cd /usr/src/modules/alsa/ alsa-driver-1.0.16/
>> > $ HEADERS=/lib/modules/2.6.20-15-generic/build
>> > $ ./configure --with-kernel=$HEADERS --with-build=$HEADERS
>> > --with-cards=hda-intel
>> > will not have file creation problems now.
>> >
>> > Just beginners problems.
>> >
>> > MarvS
>> >
>> > On Fri, Mar 7, 2008 at 2:09 PM, Anita Kuno <ay.kuno@xxxxxxxxx> wrote:
>> >
>> >> So a number of people are asking me if I have sl-modem-daemon.
>> >>
>> >> And I didn't know. So it was suggested I run:
>> >> apt-cache policy sl-modem-daemon
>> >>
>> >> So I did:
>> >> /$ apt-cache policy sl-modem-daemon
>> >> W: Unable to locate package sl-modem-daemon
>> >>
>> >> So others seem to feel this is an important piece of information.
>> >>
>> >> How do people on this list feel?
>> >>
>> >>
>> >>
>> >> Thanks,
>> >> Anita.
>> >>
>> >>
>> >>
>> >>
>> >>
>> >> Marvin Stodolsky wrote:
>> >> > Anita,
>> >> >
>> >> > Looks like the long form of the configure command is necessary
>> >> > Make a useful definition:
>> >> > $ HEADERS=/lib/modules/2.6.20-15-generic/build
>> >> >
>> >> > Check for validity with:
>> >> > $ ls $HEADERS
>> >> > should show files like:
>> >> > arch include lib scripts
>> >> > block init Makefile security
>> >> > crypto ipc mm sound
>> >> > drivers fs kernel net usr
>> >> > ----------------
>> >> > This definition does not survive a shutdown and must be redone upon reboot,
>> >> > when a new driver compiling is necessary.
>> >> >
>> >> > To compile the driver set, move into the driver folder:
>> >> > $ cd alsa-driver-1.0.16
>> >> >
>> >> > Do the configuration with with the following command on ONE LINE:
>> >> > $ ./configure --with-kernel=$HEADERS --with-build=$HEADERS
>> >> > --with-cards=hda-intel
>> >> >
>> >> > On Fri, Mar 7, 2008 at 1:00 AM, Anita Kuno <ay.kuno@xxxxxxxxx> wrote:
>> >> >
>> >> >> $ mkdir alsa #worked
>> >> >> $ cd alsa #worked
>> >> >>
>> >> >> unpack with ( ../ means the next higher folder)
>> >> >> $ tar jxf ../alsa-*.tar.bz2 #had to sudo and unpack one at a time but done
>> >> >>
>> >> >> which will unpack both packages. Move into the driver folder
>> >> >> $ cd alsa-driver-1.0.16
>> >> >> Browsen a bit, then do
>> >> >> $ ./configure --with-cards=hda-intel
>> >> >>
>> >> >> Got this far. The config.log is attached. It is very big.
>> >> >>
>> >> >> Thanks for all the help.
>> >> >>
>> >> >>
>> >> >>
>> >> >> Anita.
>> >> >>
>> >> >>
>> >> >>
>> >> >>
>> >> >>
>> >> >>
>> >> >> Marvin Stodolsky wrote:
>> >> >> > Anita,
>> >> >> >
>> >> >> > RE: If I may be so bold as to collaborate on this effort, I noticed the
>> >> >> > following lines in the logfile:
>> >> >> > <102.812335> open file: /var/lib/slmodem/data.hw:0,6...
>> >> >> > <102.812400> cannot open '/var/lib/slmodem/data.hw:0,6': No such file or
>> >> >> > directory
>> >> >> > -------------
>> >> >> > This is seen also with functioning modems and is not important.
>> >> >> >
>> >> >> > The outstanding problem begins here:
>> >> >> > <124.211995> main: alsa_start...
>> >> >> > error: cannot setup hw params for playback: Invalid argument
>> >> >> > <124.212186> err: hw:0,6: modem start = -22: cannot start device.
>> >> >> > <124.212210> hw:0,6: modem_stop..
>> >> >> >
>> >> >> > All you have done is technically correct. The next thing to try is
>> >> >> > upgrading snd-hda-intel and its dependent driver set. Give a first
>> >> >> > read to the example
>> >> >> > http://linmodems.technion.ac.il/archive-seventh/msg00282.html
>> >> >> >
>> >> >> > You will need to download from
>> >> >> > http://www.alsa-project.org/main/index.php/Main_Page
>> >> >> > The packages alsa-driver-1.0.16 and alsa-lib-1.0.16
>> >> >> > $ mkdir alsa
>> >> >> > $ cd alsa
>> >> >> > unpack with ( ../ means the next higher folder)
>> >> >> > $ tar jxf ../alsa-*.tar.bz2
>> >> >> > which will unpack both packages. Move into the driver folder
>> >> >> > $ cd alsa-driver-1.0.16
>> >> >> > Browsen a bit, then do
>> >> >> > $ ./configure --with-cards=hda-intel
>> >> >> > If the configuration is successful, the driver set will be compiled with:
>> >> >> > $ make
>> >> >> > Get some coffee, this will take a while
>> >> >> > Do nothing in the alsa-lib-1.0.16/ folder. But it is used during the compile.
>> >> >> >
>> >> >> > The new driver set is displayed by:
>> >> >> > $ ls modules
>> >> >> > and installed by
>> >> >> > $ sudo make install
>> >> >> >
>> >> >> > THen reboot and retest the modem
>> >> >> >
>> >> >> > MarvS
>> >> >> >
>> >> >> >
>> >> >> >
>> >> >> >
>> >> >> > On Thu, Mar 6, 2008 at 10:10 PM, Anita Kuno <ay.kuno@xxxxxxxxx> wrote:
>> >> >> >
>> >> >> >> Some excellent diagnostic questions, thank you.
>> >> >> >>
>> >> >> >> I am dual booted. The modem/phone-line combination, that you are
>> >> >> >> helping to make work with feisty, is the same one that I am using to
>> >> >> >> communicate with you now.
>> >> >> >>
>> >> >> >> I am attaching the logfile. It is wordy.
>> >> >> >>
>> >> >> >> If I may be so bold as to collaborate on this effort, I noticed the
>> >> >> >> following lines in the logfile:
>> >> >> >> <102.812335> open file: /var/lib/slmodem/data.hw:0,6...
>> >> >> >> <102.812400> cannot open '/var/lib/slmodem/data.hw:0,6': No such file or
>> >> >> >> directory
>> >> >> >>
>> >> >> >> So I went looking for /var/lib/slmodem/data.hw:0,6 and I couldn't find it.
>> >> >> >> anita@anitas-computer:~$ cd /
>> >> >> >> anita@anitas-computer:/$ cd /var/lib
>> >> >> >> anita@anitas-computer:/var/lib$ ls
>> >> >> >> acpi-support dhcp3 logrotate synaptic
>> >> >> >> alsa dictionaries-common misc ucf
>> >> >> >> apt doc-base mozilla-firefox update-manager
>> >> >> >> aptitude dpkg mozilla-thunderbird update-notifier
>> >> >> >> aspell gcj-4.1 NetworkManager urandom
>> >> >> >> avahi-autoipd gconf python-support vim
>> >> >> >> belocs gdm scrollkeeper x11
>> >> >> >> binfmts gstreamer security xkb
>> >> >> >> bittorrent initramfs-tools sgml-base xml-core
>> >> >> >> dbus initscripts slocate
>> >> >> >> defoma locales snmp
>> >> >> >> anita@anitas-computer:/var/lib$
>> >> >> >>
>> >> >> >> So what step was supposed to create a directory and file in /var/lib ?
>> >> >> >> It seems that step did not have the expected result.
>> >> >> >> Or perhaps I am wrong?
>> >> >> >>
>> >> >> >> Thanks,
>> >> >> >>
>> >> >> >>
>> >> >> >> Anita.
>> >> >> >>
>> >> >> >> Marvin Stodolsky wrote:
>> >> >> >> > Anita,
>> >> >> >> > First, can you verify that your phone is Touch Tone dial rather than
>> >> >> >> > the older PULSE type?
>> >> >> >> > 2) Make sure an ordinary phone dials out on the line you are using, or
>> >> >> >> > that the modem works under Microsoft.
>> >> >> >> >
>> >> >> >> > 3) use the following setup
>> >> >> >> > $ sudo slmodemd -c CANADA -a --debug=2 --log hw:0,6
>> >> >> >> >
>> >> >> >> > Then in the 2nd console the usual
>> >> >> >> > $ sudo wvdial
>> >> >> >> >
>> >> >> >> > After the failure, send us the generated logfile
>> >> >> >> >
>> >> >> >> > MarvS
>> >> >> >> >
>> >> >> >> >
>> >> >> >> > On Thu, Mar 6, 2008 at 9:10 PM, Anita Kuno <ay.kuno@xxxxxxxxx> wrote:
>> >> >> >> >
>> >> >> >> >> Thank you for the suggestion, Marvin.
>> >> >> >> >>
>> >> >> >> >> I tried this:
>> >> >> >> >>
>> >> >> >> >> [Dialer Defaults]
>> >> >> >> >> Init1 = ATZ
>> >> >> >> >> Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
>> >> >> >> >> Modem Type = Analog Modem
>> >> >> >> >> Baud = 460800
>> >> >> >> >> Modem = /dev/ttySL0
>> >> >> >> >> ISDN = 0
>> >> >> >> >> Phone = 7054579564
>> >> >> >> >> Password = XXXXXXXX #protected for the purpose of the email
>> >> >> >> >> Username = XXXXXXXX #protected for the purpose of the email
>> >> >> >> >> Carrier Check = no
>> >> >> >> >>
>> >> >> >> >> And got this:
>> >> >> >> >>
>> >> >> >> >> anita@anitas-computer:~$ sudo wvdial
>> >> >> >> >>
>> >> >> >> >> --> WvDial: Internet dialer version 1.56
>> >> >> >> >> --> Cannot get information for serial port.
>> >> >> >> >> --> Initializing modem.
>> >> >> >> >> --> Sending: ATZ
>> >> >> >> >> ATZ
>> >> >> >> >> OK
>> >> >> >> >> --> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
>> >> >> >> >> ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
>> >> >> >> >> OK
>> >> >> >> >> --> Modem initialized.
>> >> >> >> >> --> Sending: ATDT7054579564
>> >> >> >> >> --> Waiting for carrier.
>> >> >> >> >> ATDT7054579564
>> >> >> >> >> NO CARRIER
>> >> >> >> >> ERROR
>> >> >> >> >>
>> >> >> >> >> So then I tried this:
>> >> >> >> >>
>> >> >> >> >> [Dialer Defaults]
>> >> >> >> >> Init1 = ATZ
>> >> >> >> >> Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
>> >> >> >> >> Modem Type = Analog Modem
>> >> >> >> >> Baud = 460800
>> >> >> >> >> Modem = /dev/ttySL0
>> >> >> >> >> ISDN = 0
>> >> >> >> >> Phone = 7054579564
>> >> >> >> >> Password = XXXXXXXX
>> >> >> >> >> Username = XXXXXXXX@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx #this
>> >> >> >> >> information I obtained by logging into irc and evaluating my personal
>> >> >> >> >> information. Thought I would give it a try.
>> >> >> >> >> Carrier Check = no
>> >> >> >> >>
>> >> >> >> >> And I got this:
>> >> >> >> >>
>> >> >> >> >> anita@anitas-computer:~$ sudo wvdial
>> >> >> >> >>
>> >> >> >> >> --> WvDial: Internet dialer version 1.56
>> >> >> >> >> --> Cannot get information for serial port.
>> >> >> >> >> --> Initializing modem.
>> >> >> >> >> --> Sending: ATZ
>> >> >> >> >> ATZ
>> >> >> >> >> OK
>> >> >> >> >> --> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
>> >> >> >> >> ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
>> >> >> >> >> OK
>> >> >> >> >> --> Modem initialized.
>> >> >> >> >> --> Sending: ATDT7054579564
>> >> >> >> >> --> Waiting for carrier.
>> >> >> >> >> ATDT7054579564
>> >> >> >> >> NO CARRIER
>> >> >> >> >> ERROR
>> >> >> >> >>
>> >> >> >> >> What should I try next?
>> >> >> >> >>
>> >> >> >> >> Thank you,
>> >> >> >> >> Anita.
>> >> >> >> >>
>> >> >> >> >>
>> >> >> >> >>
>> >> >> >> >>
>> >> >> >> >>
>> >> >> >> >> Marvin Stodolsky wrote:
>> >> >> >> >> > Anita,
>> >> >> >> >> > Add a line to /etc/wvdial.conf
>> >> >> >> >> > Carrier Check = no
>> >> >> >> >> > and then retest as before. This line is necessary, because /dev/pts/N
>> >> >> >> >> > ports do not yet have "sound hearing" capability and hence cannot hear
>> >> >> >> >> > the Carrier signal.
>> >> >> >> >> >
>> >> >> >> >> > MarvS
>> >> >> >> >> >
>> >> >> >> >> > On Thu, Mar 6, 2008 at 4:33 PM, Anita Kuno <ay.kuno@xxxxxxxxx> wrote:
>> >> >> >> >> >
>> >> >> >> >> >> Thank you, Jacques, I did figure out that my problem from my last post
>> >> >> >> >> >> was that I had not configured the file by calling wvdialconf. Thank you
>> >> >> >> >> >> for your clarity.
>> >> >> >> >> >>
>> >> >> >> >> >> So after running wvdialconf, I configured the file as follows:
>> >> >> >> >> >>
>> >> >> >> >> >> [Dialer Defaults]
>> >> >> >> >> >> Init1 = ATZ
>> >> >> >> >> >> Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
>> >> >> >> >> >> Modem Type = Analog Modem
>> >> >> >> >> >> Baud = 460800
>> >> >> >> >> >>
>> >> >> >> >> >> Modem = /dev/ttySL0
>> >> >> >> >> >> ISDN = 0
>> >> >> >> >> >> Phone = 7054579564
>> >> >> >> >> >> Password = XXXXXXXX #hidden for the purpose of this email
>> >> >> >> >> >> Username = XXXXXXXX #hidden for the purpose of this email
>> >> >> >> >> >>
>> >> >> >> >> >> And ran sudo wvdial:
>> >> >> >> >> >> $ sudo wvdial
>> >> >> >> >> >>
>> >> >> >> >> >> --> WvDial: Internet dialer version 1.56
>> >> >> >> >> >> --> Cannot get information for serial port.
>> >> >> >> >> >> --> Initializing modem.
>> >> >> >> >> >> --> Sending: ATZ
>> >> >> >> >> >> ATZ
>> >> >> >> >> >> OK
>> >> >> >> >> >> --> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
>> >> >> >> >> >>
>> >> >> >> >> >> ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
>> >> >> >> >> >> OK
>> >> >> >> >> >> --> Modem initialized.
>> >> >> >> >> >> --> Sending: ATDT7054579564
>> >> >> >> >> >> --> Waiting for carrier.
>> >> >> >> >> >> ATDT7054579564
>> >> >> >> >> >> NO CARRIER
>> >> >> >> >> >> ERROR
>> >> >> >> >> >> --> No Carrier! Trying again.
>> >> >> >> >> >> --> Sending: ATDT7054579564
>> >> >> >> >> >> --> Waiting for carrier.
>> >> >> >> >> >> ATDT7054579564
>> >> >> >> >> >> NO CARRIER
>> >> >> >> >> >>
>> >> >> >> >> >> So, NO CARRIER. What is it looking for and how do I give it what it wants?
>> >> >> >> >> >>
>> >> >> >> >> >>
>> >> >> >> >> >> Thanks,
>> >> >> >> >> >> Anita.
>> >> >> >> >> >>
>> >> >> >> >> >>
>> >> >> >> >> >> Jacques Goldberg wrote:
>> >> >> >> >> >> > Again
>> >> >> >> >> >> >
>> >> >> >> >> >> > 1-In one window, sudo slmodemd etc...
>> >> >> >> >> >> > 2-In an other window, sudo wvdialconf /etc/wvdial.conf
>> >> >> >> >> >> > Instead, you did sudo wvdial /etc/wvdial.conf
>> >> >> >> >> >> > but wvdialconf and wvdial are NOT the same thing. These are two
>> >> >> >> >> >> > DIFFERENT commands. One configures the modem once for all, the other,
>> >> >> >> >> >> > wvdial , makes the connection
>> >> >> >> >> >> >
>> >> >> >> >> >> > You must run wvdialconf as shown, at least ONCE, while slmodemd IS
>> >> >> >> >> >> > running
>> >> >> >> >> >> > wvdialconf will find your modem
>> >> >> >> >> >> > Edit the file /etc/wvdial.conf (username, password, phone . Remove
>> >> >> >> >> >> > leading ; and < > containers and replace parameter in container by
>> >> >> >> >> >> > value given to you by your ISP )
>> >> >> >> >> >> >
>> >> >> >> >> >> > Only NOW can you try, as many times as you like sudo wvdial
>> >> >> >> >> >> > and note, NOT sudo wvdial /etc/wvdial.conf , just sudo wvdial
>> >> >> >> >> >> > wvdial knows that it has to use /etc/wvdial.conf
>> >> >> >> >> >> >
>> >> >> >> >> >> > And just to make sure: slmodemd MUST also be running while you try
>> >> >> >> >> >> > wvdial
>> >> >> >> >> >>
>> >> >> >> >> >>
>> >> >> >> >> >>
>> >> >> >> >> >> > Jacques
>> >> >> >> >> >> >
>> >> >> >> >> >> > Anita Kuno wrote:
>> >> >> >> >> >> >> Thank you, Jacques, you are entirely correct. I do not understand
>> >> >> >> >> >> >> the procedure.
>> >> >> >> >> >> >>
>> >> >> >> >> >> >> However, when I sent
>> >> >> >> >> >> >> Results from second terminal with first terminal running slmodemd:
>> >> >> >> >> >> >> that was my way of saying that I had done the first step as you
>> >> >> >> >> >> >> outlined:
>> >> >> >> >> >> >> 1-In one window, you start slmodemd and DO NOT STOP IT
>> >> >> >> >> >> >>
>> >> >> >> >> >> >> And when I also submitted:
>> >> >> >> >> >> >> anita@anitas-computer:~$ sudo wvdial /etc/wvdial.conf
>> >> >> >> >> >> >> Password:
>> >> >> >> >> >> >> --> WvDial: Internet dialer version 1.56
>> >> >> >> >> >> >> --> Warning: section [Dialer /etc/wvdial.conf] does not exist in
>> >> >> >> >> >> >> wvdial.conf.
>> >> >> >> >> >> >> --> Cannot open /dev/modem: No such file or directory
>> >> >> >> >> >> >> --> Cannot open /dev/modem: No such file or directory
>> >> >> >> >> >> >> --> Cannot open /dev/modem: No such file or directory
>> >> >> >> >> >> >>
>> >> >> >> >> >> >> That was my way of demonstrating that I had:
>> >> >> >> >> >> >> 2-In an other window you start
>> >> >> >> >> >> >> sudo wvdialconf /etc/wvdial./.conf
>> >> >> >> >> >> >>
>> >> >> >> >> >> >> And I was hoping for:
>> >> >> >> >> >> >> which should find your modem
>> >> >> >> >> >> >>
>> >> >> >> >> >> >> And perhaps I mis-interpreted the result, but when I read:
>> >> >> >> >> >> >> --> Warning: section [Dialer /etc/wvdial.conf] does not exist in
>> >> >> >> >> >> >> wvdial.conf.
>> >> >> >> >> >> >> --> Cannot open /dev/modem: No such file or directory
>> >> >> >> >> >> >> --> Cannot open /dev/modem: No such file or directory
>> >> >> >> >> >> >> --> Cannot open /dev/modem: No such file or directory
>> >> >> >> >> >> >> I took that to mean that it couldn't find the modem.
>> >> >> >> >> >> >>
>> >> >> >> >> >> >> So I am wondering how to find the modem.
>> >> >> >> >> >> >>
>> >> >> >> >> >> >> Thanks,
>> >> >> >> >> >> >> Anita.
>> >> >> >> >> >> >>
>> >> >> >> >> >> >>
>> >> >> >> >> >> >>
>> >> >> >> >> >> >>
>> >> >> >> >> >> >> Jacques Goldberg wrote:
>> >> >> >> >> >> >>> I believe that you do not understand the procedure
>> >> >> >> >> >> >>>
>> >> >> >> >> >> >>> 1-In one window, you start slmodemd and DO NOT STOP IT
>> >> >> >> >> >> >>> 2-In an other window you start
>> >> >> >> >> >> >>> sudo wvdialconf /etc/wvdial./.conf
>> >> >> >> >> >> >>> which should find your modem
>> >> >> >> >> >> >>> When wvdialconf exits and has found a modem, you EDIT
>> >> >> >> >> >> >>> the file /etc/wvdial.conf to set username, password, phone
>> >> >> >> >> >> >>> as in
>> >> >> >> >> >> >>> username = tartempion
>> >> >> >> >> >> >>> phone = 0123456788
>> >> >> >> >> >> >>> password = sunday_times
>> >> >> >> >> >> >>> After editing, you start wvdial as
>> >> >> >> >> >> >>> sudo wvdial
>> >> >> >> >> >> >>> and you do NOT stop wvdial until you want to close the phone call.
>> >> >> >> >> >> >>> You cannot use these two windows for anything else until you have
>> >> >> >> >> >> >>> ended wvdial and slmodemd
>> >> >> >> >> >> >>>
>> >> >> >> >> >> >>> Jacques
>> >> >> >> >> >> >>>
>> >> >> >> >> >> >>> Anita Kuno wrote:
>> >> >> >> >> >> >>>> Thank you Marvin and Antonio,
>> >> >> >> >> >> >>>>
>> >> >> >> >> >> >>>> Results from second terminal with first terminal running slmodemd:
>> >> >> >> >> >> >>>>
>> >> >> >> >> >> >>>> anita@anitas-computer:~$ sudo wvdial /etc/wvdial.conf
>> >> >> >> >> >> >>>> Password:
>> >> >> >> >> >> >>>> --> WvDial: Internet dialer version 1.56
>> >> >> >> >> >> >>>> --> Warning: section [Dialer /etc/wvdial.conf] does not exist in
>> >> >> >> >> >> >>>> wvdial.conf.
>> >> >> >> >> >> >>>> --> Cannot open /dev/modem: No such file or directory
>> >> >> >> >> >> >>>> --> Cannot open /dev/modem: No such file or directory
>> >> >> >> >> >> >>>> --> Cannot open /dev/modem: No such file or directory
>> >> >> >> >> >> >>>> anita@anitas-computer:~$
>> >> >> >> >> >> >>>>
>> >> >> >> >> >> >>>>
>> >> >> >> >> >> >>>> Marvin Stodolsky wrote:
>> >> >> >> >> >> >>>>> Anita,
>> >> >> >> >> >> >>>>>
>> >> >> >> >> >> >>>>> Just to clarify on Antonio's terse comment.
>> >> >> >> >> >> >>>>> After the successful:
>> >> >> >> >> >> >>>>> $ sudo slmodemd -c CANADA --alsa hw:0,6
>> >> >> >> >> >> >>>>> leave slmodemd running.
>> >> >> >> >> >> >>>>> Open a 2nd console or new TAB on the same one and run the
>> >> >> >> >> >> >>>>> $ sudo wvdialconf /etc/wvdial.conf
>> >> >> >> >> >> >>>>> If this step succeeds:
>> >> >> >> >> >> >>>>> $ sudo gedit /etc/wvdial.conf
>> >> >> >> >> >> >>>>> and edit to a format like that below.
>> >> >> >> >> >> >>>>>
>> >> >> >> >> >> >>>>> Afterward with slmodemd still running, try a dialout with:
>> >> >> >> >> >> >>>>> $ sudo wvdial
>> >> >> >> >> >> >>>>>
>> >> >> >> >> >> >>>>> Please report back to the List, not to me directly:
>> >> >> >> >> >> >>>>>
>> >> >> >> >> >> >>>>> MarvS
>> >> >> >> >> >> >>>>> -----------------
>> >> >> >> >> >> >>>>> [Dialer Defaults]
>> >> >> >> >> >> >>>>> Init1 = ATZ
>> >> >> >> >> >> >>>>> Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
>> >> >> >> >> >> >>>>> Modem Type = Analog Modem
>> >> >> >> >> >> >>>>> Baud = 460800
>> >> >> >> >> >> >>>>> New PPPD = yes
>> >> >> >> >> >> >>>>> Modem = /dev/ttySL0
>> >> >> >> >> >> >>>>> ISDN = 0
>> >> >> >> >> >> >>>>> Password = YourPassword
>> >> >> >> >> >> >>>>> Username = LoginName@xxxxxxxxxxxxxxxx
>> >> >> >> >> >> >>>>> Phone = 3015560020
>> >> >> >> >> >> >>>>> # needed for usage with /dev/pts/N ports:
>> >> >> >> >> >> >>>>> Carrier Check = no
>> >> >> >> >> >> >>>>>
>> >> >> >> >> >> >>>>>
>> >> >> >> >> >> >>>>>
>> >> >> >> >> >> >>>>>
>> >> >> >> >> >> >>>>> On Wed, Mar 5, 2008 at 7:38 PM, Antonio Olivares
>> >> >> >> >> >> >>>>> <olivares14031@xxxxxxxxx> wrote:
>> >> >> >> >> >> >>>>>
>> >> >> >> >> >> >>>>>> When you did this
>> >> >> >> >> >> >>>>>>
>> >> >> >> >> >> >>>>>>
>> >> >> >> >> >> >>>>>> $ sudo slmodemd -c CANADA --alsa hw:0,6
>> >> >> >> >> >> >>>>>> => SmartLink Soft Modem: version 2.9.11 Feb 17 2008 09:31:10
>> >> >> >> >> >> >>>>>> => symbolic link `/dev/ttySL0' -> `/dev/pts/1' created.
>> >> >> >> >> >> >>>>>> => modem `hw:0,6' created. TTY is `/dev/pts/1'
>> >> >> >> >> >> >>>>>> =>Use `/dev/ttySL0' as modem device, Ctrl+C for termination.
>> >> >> >> >> >> >>>>>>
>> >> >> >> >> >> >>>>>> Did you CTRL+C to do sudo wvdialconf /etc/wvdial.conf ?
>> >> >> >> >> >> >>>>>>
>> >> >> >> >> >> >>>>>> open up another terminal or session and then type
>> >> >> >> >> >> >>>>>>
>> >> >> >> >> >> >>>>>>
>> >> >> >> >> >> >>>>>> $ sudo wvdialconf /etc/wvdial.conf
>> >> >> >> >> >> >>>>>>
>> >> >> >> >> >> >>>>>> That should find your modem, and get you setup. Please report
>> >> >> >> >> >> >>>>>> back if
>> >> >> >> >> >> >>>>>> you have trouble/questions.
>> >> >> >> >> >> >>>>>>
>> >> >> >> >> >> >>>>>> Regards,
>> >> >> >> >> >> >>>>>>
>> >> >> >> >> >> >>>>>> Antonio
>> >> >> >> >> >> >>>>>>
>> >> >> >> >> >> >>>>>>
>> >> >> >> >> >> >>>>>>
>> >> >> >> >> >> >>>>>> On 3/5/08, Anita Kuno <ay.kuno@xxxxxxxxx> wrote:
>> >> >> >> >> >> >>>>>> > I have unpacked SLMODEMD:
>> >> >> >> >> >> >>>>>> > $ tar -zxvf ./SLMODEMD.gcc4.1.tar.gz
>> >> >> >> >> >> >>>>>> >
>> >> >> >> >> >> >>>>>> > And I believe this makes SLMODEMD an executable file:
>> >> >> >> >> >> >>>>>> > $ chmod +x slmodemd
>> >> >> >> >> >> >>>>>> > $ sudo cp slmodemd /usr/sbin
>> >> >> >> >> >> >>>>>> >
>> >> >> >> >> >> >>>>>> > And I think this verifies the location:
>> >> >> >> >> >> >>>>>> > $ find /usr -name slmodemd
>> >> >> >> >> >> >>>>>> > => /usr/sbin/slmodemd
>> >> >> >> >> >> >>>>>> >
>> >> >> >> >> >> >>>>>> > So then I installed SLMODEMD:
>> >> >> >> >> >> >>>>>> > $ sudo slmodemd -c CANADA --alsa hw:0,6
>> >> >> >> >> >> >>>>>> > => SmartLink Soft Modem: version 2.9.11 Feb 17 2008 09:31:10
>> >> >> >> >> >> >>>>>> > => symbolic link `/dev/ttySL0' -> `/dev/pts/1' created.
>> >> >> >> >> >> >>>>>> > => modem `hw:0,6' created. TTY is `/dev/pts/1'
>> >> >> >> >> >> >>>>>> > =>Use `/dev/ttySL0' as modem device, Ctrl+C for termination.
>> >> >> >> >> >> >>>>>> >
>> >> >> >> >> >> >>>>>> > So then I worked on wvdial.
>> >> >> >> >> >> >>>>>> > $ which wvdial
>> >> >> >> >> >> >>>>>> > => /usr/bin/wvdial
>> >> >> >> >> >> >>>>>> > $ sudo wvdialconf /etc/wvdial.conf
>> >> >> >> >> >> >>>>>> > =>Editing `/etc/wvdial.conf'.
>> >> >> >> >> >> >>>>>> > => Scanning your serial ports for a modem.
>> >> >> >> >> >> >>>>>> > => Modem Port Scan<*1>: S0 S1 S2 S3
>> >> >> >> >> >> >>>>>> > => Sorry, no modem was detected! Is it in use by another
>> >> >> >> >> >> >>>>>> program?
>> >> >> >> >> >> >>>>>> > => Did you configure it properly with setserial?
>> >> >> >> >> >> >>>>>> > => Please read the FAQ at http://open.nit.ca/wiki/?WvDial
>> >> >> >> >> >> >>>>>> > => If you still have problems, send mail to
>> >> >> >> >> >> >>>>>> <wvdial-list@xxxxxxxxxxxx>.
>> >> >> >> >> >> >>>>>> >
>> >> >> >> >> >> >>>>>> > I have tried the url to find the FAQ, can't find it.
>> >> >> >> >> >> >>>>>> > And I have emailed them to ask for the FAQ url, no response.
>> >> >> >> >> >> >>>>>> >
>> >> >> >> >> >> >>>>>> > So I have evaluated the sound card:
>> >> >> >> >> >> >>>>>> > $ cat /proc/asound/cards
>> >> >> >> >> >> >>>>>> > => 0 [Intel ]: HDA-Intel - HDA Intel
>> >> >> >> >> >> >>>>>> > => HDA Intel at 0xd8240000 irq 21
>> >> >> >> >> >> >>>>>> >
>> >> >> >> >> >> >>>>>> > And run uname:
>> >> >> >> >> >> >>>>>> > $ uname -a
>> >> >> >> >> >> >>>>>> > Linux anitas-computer 2.6.20-15-generic #2 SMP Sun Apr 15
>> >> >> >> >> >> >>>>>> 07:36:31 UTC
>> >> >> >> >> >> >>>>>> > 2007 i686 GNU/Linux
>> >> >> >> >> >> >>>>>> >
>> >> >> >> >> >> >>>>>> > And confirmed module-init-tools:
>> >> >> >> >> >> >>>>>> > $ dpkg -s module-init-tools
>> >> >> >> >> >> >>>>>> > => Package: module-init-tools
>> >> >> >> >> >> >>>>>> > => Status: install ok installed
>> >> >> >> >> >> >>>>>> >
>> >> >> >> >> >> >>>>>> > What is my next step?
>> >> >> >> >> >> >>>>>> >
>> >> >> >> >> >> >>>>>> > Thank you,
>> >> >> >> >> >> >>>>>> > Anita.
>> >> >> >> >> >> >>>>>> >
>> >> >> >> >> >> >>>>>> >
>> >> >> >> >> >> >>>>>> >
>> >> >> >> >> >> >>>>>> >
>> >> >> >> >> >> >>>>>> >
>> >> >> >> >> >> >>>>>>
>> >> >> >> >> >> >>>>>>
>> >> >> >> >> >> >>>>>
>> >> >> >> >> >> >>>>>
>> >> >> >> >> >> >>>>
>> >> >> >> >> >> >>>
>> >> >> >> >> >> >>
>> >> >> >> >> >> >
>> >> >> >> >> >>
>> >> >> >> >> >>
>> >> >> >> >> >>
>> >> >> >> >> >
>> >> >> >> >> >
>> >> >> >> >>
>> >> >> >> >>
>> >> >> >> >>
>> >> >> >> >
>> >> >> >> >
>> >> >> >>
>> >> >> >>
>> >> >> >> anita@anitas-computer:~$ sudo slmodemd -c CANADA -a --debug=2 --log hw:0,6
>> >> >> >> Password:
>> >> >> >> SmartLink Soft Modem: version 2.9.11 Feb 17 2008 09:31:10
>> >> >> >> <102.811403> SmartLink Soft Modem: version 2.9.11 Feb 17 2008 09:31:10
>> >> >> >> <102.811493> hw:0,6: startup modem...
>> >> >> >> <102.811607> hw:0,6: update termios...
>> >> >> >> symbolic link `/dev/ttySL0' -> `/dev/pts/2' created.
>> >> >> >> modem `hw:0,6' created. TTY is `/dev/pts/2'
>> >> >> >> <102.812335> open file: /var/lib/slmodem/data.hw:0,6...
>> >> >> >> <102.812400> cannot open '/var/lib/slmodem/data.hw:0,6': No such file or directory
>> >> >> >> <102.821020> main: rt applyed: SCHED_FIFO, pri 99
>> >> >> >> Use `/dev/ttySL0' as modem device, Ctrl+C for termination.
>> >> >> >> <123.805297> main: termios changed.
>> >> >> >> <123.805359> hw:0,6: update termios...
>> >> >> >> <123.899945> main: termios changed.
>> >> >> >> <123.899990> hw:0,6: update termios...
>> >> >> >> <123.999911> hw:0,6: run cmd: ATZ
>> >> >> >> <123.999954> hw:0,6: modem reset...
>> >> >> >> <123.999974> hw:0,6: modem set state: 1 --> 1...
>> >> >> >> <123.999997> hw:0,6: modem set mode: -> 0...
>> >> >> >> <124.000017> hw:0,6: modem report result: 0 (OK)
>> >> >> >> <124.100007> hw:0,6: run cmd: ATQ0V1E1S0=0&C1&D2+FCLASS=0
>> >> >> >> <124.100058> hw:0,6: modem set mode: -> 0...
>> >> >> >> <124.100079> hw:0,6: modem report result: 0 (OK)
>> >> >> >> <124.200095> hw:0,6: run cmd: ATDT7054579564
>> >> >> >> <124.200156> hw:0,6: modem dial: T7054579564...
>> >> >> >> <124.200177> hw:0,6: modem_dial_start...
>> >> >> >> <124.200985> hw:0,6: modem_start..
>> >> >> >> <124.201010> hw:0,6: modem set state: 1 --> 2...
>> >> >> >> <124.201045> hw:0,6: new state: DP_ESTAB
>> >> >> >> <124.201069> main: alsa_ioctl: cmd 8, arg 3...
>> >> >> >> <124.201089> hw:0,6: modem set hook: 0 --> 1...
>> >> >> >> <124.201119> main: alsa_ioctl: cmd 2, arg 1...
>> >> >> >> <124.211866> main: alsa_ioctl: cmd 11, arg 0...
>> >> >> >> <124.211950> main: alsa_ioctl: cmd 4, arg 2580...
>> >> >> >> <124.211976> main: alsa_ioctl: cmd 7, arg 30...
>> >> >> >> <124.211995> main: alsa_start...
>> >> >> >> error: cannot setup hw params for playback: Invalid argument
>> >> >> >> <124.212186> err: hw:0,6: modem start = -22: cannot start device.
>> >> >> >> <124.212210> hw:0,6: modem_stop..
>> >> >> >> <124.212227> hw:0,6: modem set hook: 1 --> 0...
>> >> >> >> <124.212246> main: alsa_ioctl: cmd 2, arg 0...
>> >> >> >> <124.219868> main: alsa_ioctl: cmd 8, arg 0...
>> >> >> >> <124.220007> hw:0,6: modem set state: 2 --> 1...
>> >> >> >> <124.220030> hw:0,6: new state: MODEM_IDLE
>> >> >> >> <124.220053> hw:0,6: modem report result: 3 (NO CARRIER)
>> >> >> >> <124.220081> hw:0,6: modem report result: 4 (ERROR)
>> >> >> >> <124.520058> hw:0,6: run cmd: ATDT7054579564
>> >> >> >> <124.520122> hw:0,6: modem dial: T7054579564...
>> >> >> >> <124.520143> hw:0,6: modem_dial_start...
>> >> >> >> <124.520965> hw:0,6: modem_start..
>> >> >> >> <124.520988> hw:0,6: modem set state: 1 --> 2...
>> >> >> >> <124.521023> hw:0,6: new state: DP_ESTAB
>> >> >> >> <124.521056> main: alsa_ioctl: cmd 8, arg 3...
>> >> >> >> <124.521089> hw:0,6: modem set hook: 0 --> 1...
>> >> >> >> <124.521121> main: alsa_ioctl: cmd 2, arg 1...
>> >> >> >> <124.531858> main: alsa_ioctl: cmd 11, arg 0...
>> >> >> >> <124.531945> main: alsa_ioctl: cmd 4, arg 2580...
>> >> >> >> <124.531974> main: alsa_ioctl: cmd 7, arg 30...
>> >> >> >> <124.531993> main: alsa_start...
>> >> >> >> error: cannot setup hw params for playback: Invalid argument
>> >> >> >> <124.539942> err: hw:0,6: modem start = -22: cannot start device.
>> >> >> >> <124.539978> hw:0,6: modem_stop..
>> >> >> >> <124.539998> hw:0,6: modem set hook: 1 --> 0...
>> >> >> >> <124.540017> main: alsa_ioctl: cmd 2, arg 0...
>> >> >> >> <124.547855> main: alsa_ioctl: cmd 8, arg 0...
>> >> >> >> <124.547978> hw:0,6: modem set state: 2 --> 1...
>> >> >> >> <124.547997> hw:0,6: new state: MODEM_IDLE
>> >> >> >> <124.548019> hw:0,6: modem report result: 3 (NO CARRIER)
>> >> >> >> <124.548048> hw:0,6: modem report result: 4 (ERROR)
>> >> >> >> <124.848056> hw:0,6: run cmd: ATDT7054579564
>> >> >> >> <124.848117> hw:0,6: modem dial: T7054579564...
>> >> >> >> <124.848138> hw:0,6: modem_dial_start...
>> >> >> >> <124.848943> hw:0,6: modem_start..
>> >> >> >> <124.848967> hw:0,6: modem set state: 1 --> 2...
>> >> >> >> <124.849002> hw:0,6: new state: DP_ESTAB
>> >> >> >> <124.849035> main: alsa_ioctl: cmd 8, arg 3...
>> >> >> >> <124.849067> hw:0,6: modem set hook: 0 --> 1...
>> >> >> >> <124.849099> main: alsa_ioctl: cmd 2, arg 1...
>> >> >> >> <124.859854> main: alsa_ioctl: cmd 11, arg 0...
>> >> >> >> <124.859941> main: alsa_ioctl: cmd 4, arg 2580...
>> >> >> >> <124.859965> main: alsa_ioctl: cmd 7, arg 30...
>> >> >> >> <124.859984> main: alsa_start...
>> >> >> >> error: cannot setup hw params for playback: Invalid argument
>> >> >> >> <124.867934> err: hw:0,6: modem start = -22: cannot start device.
>> >> >> >> <124.867969> hw:0,6: modem_stop..
>> >> >> >> <124.867988> hw:0,6: modem set hook: 1 --> 0...
>> >> >> >> <124.868007> main: alsa_ioctl: cmd 2, arg 0...
>> >> >> >> <124.875855> main: alsa_ioctl: cmd 8, arg 0...
>> >> >> >> <124.875980> hw:0,6: modem set state: 2 --> 1...
>> >> >> >> <124.875999> hw:0,6: new state: MODEM_IDLE
>> >> >> >> <124.876017> hw:0,6: modem report result: 3 (NO CARRIER)
>> >> >> >> <124.876043> hw:0,6: modem report result: 4 (ERROR)
>> >> >> >> <125.176053> hw:0,6: run cmd: ATDT7054579564
>> >> >> >> <125.176123> hw:0,6: modem dial: T7054579564...
>> >> >> >> <125.176144> hw:0,6: modem_dial_start...
>> >> >> >> <125.176945> hw:0,6: modem_start..
>> >> >> >> <125.176969> hw:0,6: modem set state: 1 --> 2...
>> >> >> >> <125.177003> hw:0,6: new state: DP_ESTAB
>> >> >> >> <125.177037> main: alsa_ioctl: cmd 8, arg 3...
>> >> >> >> <125.177068> hw:0,6: modem set hook: 0 --> 1...
>> >> >> >> <125.177101> main: alsa_ioctl: cmd 2, arg 1...
>> >> >> >> <125.187850> main: alsa_ioctl: cmd 11, arg 0...
>> >> >> >> <125.187935> main: alsa_ioctl: cmd 4, arg 2580...
>> >> >> >> <125.187961> main: alsa_ioctl: cmd 7, arg 30...
>> >> >> >> <125.187980> main: alsa_start...
>> >> >> >> error: cannot setup hw params for playback: Invalid argument
>> >> >> >> <125.195938> err: hw:0,6: modem start = -22: cannot start device.
>> >> >> >> <125.195974> hw:0,6: modem_stop..
>> >> >> >> <125.195993> hw:0,6: modem set hook: 1 --> 0...
>> >> >> >> <125.196013> main: alsa_ioctl: cmd 2, arg 0...
>> >> >> >> <125.203844> main: alsa_ioctl: cmd 8, arg 0...
>> >> >> >> <125.203967> hw:0,6: modem set state: 2 --> 1...
>> >> >> >> <125.203986> hw:0,6: new state: MODEM_IDLE
>> >> >> >> <125.204005> hw:0,6: modem report result: 3 (NO CARRIER)
>> >> >> >> <125.204031> hw:0,6: modem report result: 4 (ERROR)
>> >> >> >> <125.504051> hw:0,6: run cmd: ATDT7054579564
>> >> >> >> <125.504122> hw:0,6: modem dial: T7054579564...
>> >> >> >> <125.504144> hw:0,6: modem_dial_start...
>> >> >> >> <125.504949> hw:0,6: modem_start..
>> >> >> >> <125.504973> hw:0,6: modem set state: 1 --> 2...
>> >> >> >> <125.505007> hw:0,6: new state: DP_ESTAB
>> >> >> >> <125.505041> main: alsa_ioctl: cmd 8, arg 3...
>> >> >> >> <125.505073> hw:0,6: modem set hook: 0 --> 1...
>> >> >> >> <125.505106> main: alsa_ioctl: cmd 2, arg 1...
>> >> >> >> <125.515841> main: alsa_ioctl: cmd 11, arg 0...
>> >> >> >> <125.515928> main: alsa_ioctl: cmd 4, arg 2580...
>> >> >> >> <125.515953> main: alsa_ioctl: cmd 7, arg 30...
>> >> >> >> <125.515972> main: alsa_start...
>> >> >> >> error: cannot setup hw params for playback: Invalid argument
>> >> >> >> <125.523920> err: hw:0,6: modem start = -22: cannot start device.
>> >> >> >> <125.523959> hw:0,6: modem_stop..
>> >> >> >> <125.523978> hw:0,6: modem set hook: 1 --> 0...
>> >> >> >> <125.523997> main: alsa_ioctl: cmd 2, arg 0...
>> >> >> >> <125.531846> main: alsa_ioctl: cmd 8, arg 0...
>> >> >> >> <125.531970> hw:0,6: modem set state: 2 --> 1...
>> >> >> >> <125.531990> hw:0,6: new state: MODEM_IDLE
>> >> >> >> <125.532008> hw:0,6: modem report result: 3 (NO CARRIER)
>> >> >> >> <125.532034> hw:0,6: modem report result: 4 (ERROR)
>> >> >> >> <125.832041> hw:0,6: run cmd: ATDT7054579564
>> >> >> >> <125.832109> hw:0,6: modem dial: T7054579564...
>> >> >> >> <125.832130> hw:0,6: modem_dial_start...
>> >> >> >> <125.832932> hw:0,6: modem_start..
>> >> >> >> <125.832963> hw:0,6: modem set state: 1 --> 2...
>> >> >> >> <125.832997> hw:0,6: new state: DP_ESTAB
>> >> >> >> <125.833021> main: alsa_ioctl: cmd 8, arg 3...
>> >> >> >> <125.833041> hw:0,6: modem set hook: 0 --> 1...
>> >> >> >> <125.833072> main: alsa_ioctl: cmd 2, arg 1...
>> >> >> >> <125.843834> main: alsa_ioctl: cmd 11, arg 0...
>> >> >> >> <125.843925> main: alsa_ioctl: cmd 4, arg 2580...
>> >> >> >> <125.843949> main: alsa_ioctl: cmd 7, arg 30...
>> >> >> >> <125.843968> main: alsa_start...
>> >> >> >> error: cannot setup hw params for playback: Invalid argument
>> >> >> >> <125.851921> err: hw:0,6: modem start = -22: cannot start device.
>> >> >> >> <125.851957> hw:0,6: modem_stop..
>> >> >> >> <125.851976> hw:0,6: modem set hook: 1 --> 0...
>> >> >> >> <125.851995> main: alsa_ioctl: cmd 2, arg 0...
>> >> >> >> <125.859832> main: alsa_ioctl: cmd 8, arg 0...
>> >> >> >> <125.859958> hw:0,6: modem set state: 2 --> 1...
>> >> >> >> <125.859978> hw:0,6: new state: MODEM_IDLE
>> >> >> >> <125.859996> hw:0,6: modem report result: 3 (NO CARRIER)
>> >> >> >> <125.860023> hw:0,6: modem report result: 4 (ERROR)
>> >> >> >> <126.160045> hw:0,6: run cmd: ATDT7054579564
>> >> >> >> <126.160121> hw:0,6: modem dial: T7054579564...
>> >> >> >> <126.160141> hw:0,6: modem_dial_start...
>> >> >> >> <126.160954> hw:0,6: modem_start..
>> >> >> >> <126.160978> hw:0,6: modem set state: 1 --> 2...
>> >> >> >> <126.161012> hw:0,6: new state: DP_ESTAB
>> >> >> >> <126.161036> main: alsa_ioctl: cmd 8, arg 3...
>> >> >> >> <126.161056> hw:0,6: modem set hook: 0 --> 1...
>> >> >> >> <126.161088> main: alsa_ioctl: cmd 2, arg 1...
>> >> >> >> <126.171827> main: alsa_ioctl: cmd 11, arg 0...
>> >> >> >> <126.171919> main: alsa_ioctl: cmd 4, arg 2580...
>> >> >> >> <126.171944> main: alsa_ioctl: cmd 7, arg 30...
>> >> >> >> <126.171964> main: alsa_start...
>> >> >> >> error: cannot setup hw params for playback: Invalid argument
>> >> >> >> <126.179911> err: hw:0,6: modem start = -22: cannot start device.
>> >> >> >> <126.179947> hw:0,6: modem_stop..
>> >> >> >> <126.179967> hw:0,6: modem set hook: 1 --> 0...
>> >> >> >> <126.179986> main: alsa_ioctl: cmd 2, arg 0...
>> >> >> >> <126.187831> main: alsa_ioctl: cmd 8, arg 0...
>> >> >> >> <126.187956> hw:0,6: modem set state: 2 --> 1...
>> >> >> >> <126.187975> hw:0,6: new state: MODEM_IDLE
>> >> >> >> <126.187993> hw:0,6: modem report result: 3 (NO CARRIER)
>> >> >> >> <126.188019> hw:0,6: modem report result: 4 (ERROR)
>> >> >> >> <126.488026> hw:0,6: run cmd: ATDT7054579564
>> >> >> >> <126.488096> hw:0,6: modem dial: T7054579564...
>> >> >> >> <126.488117> hw:0,6: modem_dial_start...
>> >> >> >> <126.488919> hw:0,6: modem_start..
>> >> >> >> <126.488949> hw:0,6: modem set state: 1 --> 2...
>> >> >> >> <126.488971> hw:0,6: new state: DP_ESTAB
>> >> >> >> <126.488992> main: alsa_ioctl: cmd 8, arg 3...
>> >> >> >> <126.489013> hw:0,6: modem set hook: 0 --> 1...
>> >> >> >> <126.489044> main: alsa_ioctl: cmd 2, arg 1...
>> >> >> >> <126.499829> main: alsa_ioctl: cmd 11, arg 0...
>> >> >> >> <126.499927> main: alsa_ioctl: cmd 4, arg 2580...
>> >> >> >> <126.499953> main: alsa_ioctl: cmd 7, arg 30...
>> >> >> >> <126.499972> main: alsa_start...
>> >> >> >> error: cannot setup hw params for playback: Invalid argument
>> >> >> >> <126.507907> err: hw:0,6: modem start = -22: cannot start device.
>> >> >> >> <126.507944> hw:0,6: modem_stop..
>> >> >> >> <126.507963> hw:0,6: modem set hook: 1 --> 0...
>> >> >> >> <126.507983> main: alsa_ioctl: cmd 2, arg 0...
>> >> >> >> <126.515817> main: alsa_ioctl: cmd 8, arg 0...
>> >> >> >> <126.515965> hw:0,6: modem set state: 2 --> 1...
>> >> >> >> <126.515986> hw:0,6: new state: MODEM_IDLE
>> >> >> >> <126.516004> hw:0,6: modem report result: 3 (NO CARRIER)
>> >> >> >> <126.516030> hw:0,6: modem report result: 4 (ERROR)
>> >> >> >> <126.728412> main: termios changed.
>> >> >> >> <126.728456> hw:0,6: update termios...
>> >> >> >> <126.728479> main: pty closed.
>> >> >> >>
>> >> >> >>
>> >> >> >>
>> >> >> >>
>> >> >> >>
>> >> >> >>
>> >> >> >
>> >> >> >
>> >> >>
>> >> >>
>> >> >
>> >> >
>> >>
>> >>
>> >>
>> >
>> >
>>
>>
>> anita@anitas-computer:~$ sudo updatedb
>> Password:
>> anita@anitas-computer:~$ locate sl-modem-daemon
>> anita@anitas-computer:~$ cd /usr/src/modules
>> anita@anitas-computer:/usr/src/modules$ ls
>> alsa
>> anita@anitas-computer:/usr/src/modules$ cd alsa
>> anita@anitas-computer:/usr/src/modules/alsa$ HEADERS=/lib/modules/2.6.20-15-generic/build
>> anita@anitas-computer:/usr/src/modules/alsa$ ls $HEADERS
>> arch fs kernel Module.symvers sound
>> block include lib net ubuntu
>> crypto init Makefile scripts usr
>> drivers ipc mm security
>> anita@anitas-computer:/usr/src/modules/alsa$ cd alsa-driver-1.0.16
>> anita@anitas-computer:/usr/src/modules/alsa/alsa-driver-1.0.16$ ./configure --with-kernel=$HEADERS --with-build=$HEADERS --with-cards=hda-intel
>> checking for gcc... gcc
>> checking for C compiler default output file name... configure: error: C compiler cannot create executables
>> See `config.log' for more details.
>> anita@anitas-computer:/usr/src/modules/alsa/alsa-driver-1.0.16$ gedit config.log
>> anita@anitas-computer:/usr/src/modules/alsa/alsa-driver-1.0.16$
>>
>>
>>
>>
>>
>
>
anita@anitas-computer:~$ sudo chown -R anita:anita /usr/src/modules
Password:
anita@anitas-computer:~$ cd /usr/src/modules/alsa
anita@anitas-computer:/usr/src/modules/alsa$ ls
alsa-driver-1.0.16 alsa-lib-1.0.16
anita@anitas-computer:/usr/src/modules/alsa$ cd alsa-driver-1.0.16
anita@anitas-computer:/usr/src/modules/alsa/alsa-driver-1.0.16$ HEADERS=/lib/modules/2.6.20-15-generic/build
anita@anitas-computer:/usr/src/modules/alsa/alsa-driver-1.0.16$ ls $HEADERS
arch fs kernel Module.symvers sound
block include lib net ubuntu
crypto init Makefile scripts usr
drivers ipc mm security
anita@anitas-computer:/usr/src/modules/alsa/alsa-driver-1.0.16$ echo $HEADERS
/lib/modules/2.6.20-15-generic/build
anita@anitas-computer:/usr/src/modules/alsa/alsa-driver-1.0.16$ ./configure --with-kernel=$HEADERS --with-build=$HEADERS --with-cards=hda-intel
checking for gcc... gcc
checking for C compiler default output file name... configure: error: C compiler cannot create executables
See `config.log' for more details.
anita@anitas-computer:/usr/src/modules/alsa/alsa-driver-1.0.16$ make clean
rm -f .depend *.o snd.map*
rm -f /*.ver
rm -f modules/*.o modules/*.ko
make[1]: Entering directory `/usr/src/modules/alsa/alsa-driver-1.0.16/acore'
Makefile:6: /usr/src/modules/alsa/alsa-driver-1.0.16/Makefile.conf: No such file or directory
/usr/src/modules/alsa/alsa-driver-1.0.16/Rules.make:75: /Rules.make1: No such file or directory
make[1]: *** No rule to make target `/Rules.make1'. Stop.
make[1]: Leaving directory `/usr/src/modules/alsa/alsa-driver-1.0.16/acore'
make: *** [clean] Error 1
anita@anitas-computer:/usr/src/modules/alsa/alsa-driver-1.0.16$ ./configure --with-kernel=$HEADERS --with-build=$HEADERS --with-cards=hda-intel
checking for gcc... gcc
checking for C compiler default output file name... configure: error: C compiler cannot create executables
See `config.log' for more details.
anita@anitas-computer:/usr/src/modules/alsa/alsa-driver-1.0.16$ ls -l /usr/bin/gcc*
lrwxrwxrwx 1 root root 7 2007-11-18 08:25 /usr/bin/gcc -> gcc-4.1
-rwxr-xr-x 1 root root 183904 2007-03-02 21:52 /usr/bin/gcc-4.1
lrwxrwxrwx 1 root root 10 2007-11-18 08:25 /usr/bin/gccbug -> gccbug-4.1
-rwxr-xr-x 1 root root 16266 2007-03-02 21:47 /usr/bin/gccbug-4.1
-rwxr-xr-x 1 root root 2018 2006-12-20 09:41 /usr/bin/gccmakedep
anita@anitas-computer:/usr/src/modules/alsa/alsa-driver-1.0.16$
