Kinuthia, Please run $ lsusb and send us the section describing your USB modem Browse http://linmodems.technion.ac.il and download scanModem.gz . Within a Linux partition gunzip scanModem.gz To make it executable: chmod +x scanModem Run diagnositics with: ./scanModem Only the ouput ModemData.txt should be sent to Discuss@xxxxxxxxxxxxx ---- We need to know more about your System in order to help. MarvS On Sun, Mar 9, 2008 at 7:19 AM, Kinuthia Muchane <muchanek@xxxxxxxxx> wrote: > I successfully managed to install the drivers for my internal modem.But > when I run wvdial I get the following; > > WvDial<*1>: WvDial: Internet dialer version 1.56 > WvDial<*1>: Initializing modem. > WvDial<*1>: Sending: ATZ > WvDial Modem<*1>: ATZ > WvDial Modem<*1>: OK > WvDial<*1>: Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 > WvDial Modem<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 > WvDial Modem<*1>: OK > WvDial<*1>: Modem initialized. > WvDial<*1>: Sending: ATDT*99***1# > WvDial<*1>: Waiting for carrier. > WvDial Modem<*1>: ATDT*99***1# > WvDial Modem<*1>: NO CARRIER > WvDial<Warn>: No Carrier! Trying again. > WvDial<*1>: Sending: ATDT*99***1# > WvDial<*1>: Waiting for carrier. > WvDial Modem<*1>: ATDT*99***1# > > When I modify that and add ATX0 to dial without waiting I get the following: > > > WvDial<*1>: WvDial: Internet dialer version 1.56 > WvDial<*1>: Initializing modem. > WvDial<*1>: Sending: ATZ > WvDial Modem<*1>: ATZ > WvDial Modem<*1>: OK > WvDial<*1>: Sending: ATQ0 V1 E1 S0=0 ATX0 &C1 &D2 +FCLASS=0 > WvDial Modem<*1>: ATQ0 V1 E1 S0=0 ATX0 &C1 &D2 +FCLASS=0 > WvDial<*1>: Sending: ATQ0 > WvDial Modem<*1>: NO CARRIER > WvDial Modem<*1>: TQ0 > WvDial<*1>: Re-Sending: ATQ0 V1 E1 S0=0 ATX0 &C1 &D2 +FCLASS=0 > WvDial Modem<*1>: ATQ0 V1 E1 S0=0 ATX0 &C1 &D2 +FCLASS=0 > WvDial<Err>: Modem not responding. > > I am using a USB connected Motorola L6i cell phone and a HP 510 laptop > to connect and by the way,this connection works fine with Xp. > > > What could be the missing link? > Thanks! > >