Rudi, Please send messages to discuss@xxxxxxxxxxxxx , and not direct to me. Please go through the suggestions of the Postinstall Howto at Jacques Linmodems site, http://linmodems.technion.ac.il MarvS On Sun, Feb 24, 2008 at 11:17 AM, <rudi@xxxxxxxxxxxx> wrote: > Thanks Mr Marvin, may step is same like your step but i still can't use > the modem > > (i saw the modem dial ISP number, but my telepon line is "clear" not in > use, i'm not hear handshake sound or something like that..) > > btw mandriva2008 not have libasound2-dev but they have libalsa2-devel so > im install it.... i can compile slmodemd with alsa support without problem > :D i can load slmodemd -c INDONESIA --alsa modem:1 > > the screen said: > > SmartLink Soft Modem: Version 2.9.11 Feb 24 2008 23:06:40 > Symbolic Link '/dev/ttySL0' -> 'dev/pts/1' created. > modem 'modem:1' created. TTY is '/dev/pts/1' > Use '/dev/ttySL0' as modem device, CTRL+C for termination > > I think there is no problem for compile slmodemd with alsa support...but > the modem can't open line to make a call just stuck after atd > > maybe you have any solution or maybe my modem is new winmodem series? > > thanks for your help Mr Marvin > > > > Best Regards > Thomas Rudy Haryanto > > Thomas, > > The slmodemd compile has special requirements. Read the README, > > toward the end. > > I'm not with my Linux sources now. But: > > First install the libasound2-dev package > > Then within the modem subfolder > > $ make clean > > $ make ALSA_SUPPORT=1 > > (something like this) > > Then manually copy: > > $ su - root > > # chown root:root slmodemd > > # chmod +x slmodemd > > # cp -a slmodemd /usr/sbin/slmodemd > > > > Then retest > > # slmodemd -c INDONESIA --alsa modem:1 > > Leave slmodemd running! > > > > Open a 2nd console for the > > $ su - root > > # wvdialconf /etc/wvdial.conf > > IF the modem is found > > # gedit /etc/wvdial.conf > > to enter your dialout info and delete the ; < > symbols > > add a line: > > Carrier Check = no > > > > Then > > # wvdial > > > > MarvS > > > > > > On Thu, Feb 21, 2008 at 11:32 PM, Thomas Rudy Haryanto > > <rudi@xxxxxxxxxxxx> wrote: > >> Mr Marvin, thanks for your feedback... > >> > >> i go to http://linmodems.technion.ac.il/packages/smartlink/ but i not > >> found SLMODEMD.gcc4.2.tar.gz so i'm download SLMODEMD.gcc4.1.tar.gz and > >> tray it...but it's not work... after that, i'm compile > >> slmodem-2.9.11-20080126.tar.gz, so i get slmodemd with alsa support and > >> then i try it...there is no good result, just > >> > >> ATZ > >> OK > >> ATM0L0 > >> OK > >> ATDT32484924 > >> > >> and then stuck, i try to hear telephone line, modem does't dial .... > >> maybe you have another solution? thanks for your help... > >> > >> Best Regards > >> > >> Thomas Rudy Haryanto > >> > >> > >> > >> Marvin Stodolsky wrote: > >> > Thoman > >> > > >> > Download from http://linmodems.technion.ac.il/packages/smartlink/ > >> > the package SLMODEMD.gcc4.2.tar.gz having a compiled slmodemd. Unpack > >> > under Linux with: > >> > $ tar zxf SLMODEMD.gcc4.2.tar.gz > >> > and read instructions therein. But briefly, the modem is setup with > >> > command:I > >> > slmodemd -c INDONESIA --alsa modem:1 > >> > reporting dynamic creation of ports: > >> > /dev/ttySL0 --> /dev/pts/N , with N some number > >> > Read Smartlink.txt and Modem/YourSystem.txt for follow through > >> guidance. > >> > > >> > The AGR02 is one of the rarer codecs. > >> > Write back if you have problems. > >> > > >> > MarvS > >> > > > > >
