Hi,
Problems with modem on Inspiron 1150 and Ubuntu 7.1
Hi,
I've been trying to get modem working on my Dell Inspiron 1150 under
Ubuntu 7.1 but to no avail.
1. During the original install of Ubuntu I was asked to install some
additional drivers "slmodem" or whatever to which I said Yes. But the
modem didn't go.
2. I then tried gnome-ppp, rather than the "Network tool", but this
didn't work either
3. I then downloaded scanModem and ran it. However because I'm at the
stage of wanting to go Linux way, these output files are too confusing
for me - hence asking for help.
PS. I have also tried running "unloading", but this didn't help either.
Ideally I would really appreciate a set of steps to get it working.
Many thanks
tomasz kotula.
ModemData.txt
-------------------------
Only plain text email is forwarded by the Discuss@xxxxxxxxxxxxx List
Server,
as HTML can contain viruses. Use as the email Subject Line:
YourName, YourCountry kernel 2.6.22-14-generic
With this Subject Line cogent experts will be alerted, and useful case
names left in the Archive.
YourCountry will enable Country specific guidance. Your contry's local
Linux experts
can be found through: http://www.linux.org/groups/index.html
Responses from Discuss@xxxxxxxxxxxxx are sometimes blocked by an
Internet Provider mail filters.
So in a day, also check the Archived responses at http://www.linmodems.org
-------------------------- System information ----------------------------
CPU=i686,
Linux version 2.6.22-14-generic (buildd@palmer) (gcc version 4.1.3
20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Sun Oct 14
23:05:12 GMT 2007
scanModem update of: 2007-12-07
The modem symbolic link is /dev/modem -> ttySL0
The slmodemd set symbolic link is /dev/ttySL0 -> /dev/pts/0
There are no blacklisted modem drivers in /etc/modprobe* files
Potentially useful modem drivers now loaded are:
snd_atiixp_modem
snd_via82xx_modem
snd_intel8x0m
The Advanced Linux Sound Architecture (ALSA) packages providing audio
support on your System,
also includes drivers for some modems. High Definition Audio (HDA) cards
can themselves host
a softmodem chipset, with both audio+modem supported by a snd-hda-intel
driver.
The ALSA diagnostics are written during bootup to /proc/asound/ folders.
Modem not detected though HDA card diagnostics, though not excluding
a possible Conexant modem chip impervious to ALSA diagnostics.
Proceeding through alternative possibilties.
Summary card and chipset information is in:
/proc/asound/cards:
0 [I82801DBICH4 ]: ICH4 - Intel 82801DB-ICH4
Intel 82801DB-ICH4 with STAC9750,51 at irq 7
1 [Modem ]: ICH-MODEM - Intel 82801DB-ICH4 Modem
Intel 82801DB-ICH4 Modem at irq 7
/proc/asound/pcm:
00-04: Intel ICH - IEC958 : Intel 82801DB-ICH4 - IEC958 : playback 1
00-03: Intel ICH - ADC2 : Intel 82801DB-ICH4 - ADC2 : capture 1
00-02: Intel ICH - MIC2 ADC : Intel 82801DB-ICH4 - MIC2 ADC : capture 1
00-01: Intel ICH - MIC ADC : Intel 82801DB-ICH4 - MIC ADC : capture 1
00-00: Intel ICH : Intel 82801DB-ICH4 : playback 1 : capture 1
01-00: Intel ICH - Modem : Intel 82801DB-ICH4 Modem - Modem : playback 1
: capture 1
A copy of /proc/asound had been copied to Modem/ALSAtomasz.tgz
USB modem not detected by lsusb
For candidate card, firmware information and bootup diagnostics are:
PCI slot PCI ID SubsystemID Name
---------- --------- --------- --------------
00:1f.6 8086:24c6 14e4:4d64 Modem: Intel Corporation
82801DB/DBL/DBM
Modem interrupt assignment and sharing:
7: 386 XT-PIC-XT Intel 82801DB-ICH4, Intel
82801DB-ICH4 Modem, eth0
--- Bootup diagnostics for card in PCI slot 00:1f.6 ----
[ 13.663364] ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI
7 (level, low) -> IRQ 7
[ 13.663377] ACPI: PCI interrupt for device 0000:00:1f.6 disabled
[ 34.848000] ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI
7 (level, low) -> IRQ 7
[ 34.848000] PCI: Setting latency timer of device 0000:00:1f.6 to 64
The PCI slot 00:1f.6 of the modem card may be disabled early in
a bootup process, but then enabled later. If modem drivers load
but the modem is not responsive, read Bootup.txt about possible fixes.
Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx
if help is needed.
=== Finished modem firmware and bootup diagnostics section. ===
=== Next deducing cogent software ===
There is candidate modem software.
For candidate modem in PCI bus: 00:1f.6
Class 0703: 8086:24c6 Modem: Intel Corporation 82801DB/DBL/DBM
Primary PCI_id 8086:24c6
Subsystem PCI_id 14e4:4d64 , 14e4 is an ALSA compatible identification
Softmodem codec or chipset from diagnostics: BCM64, a Broadcom type.
from Archives: BCM64, a Broadcom type.
Lacking a dsp (digital signal processing) chip, the modem is a software
intensive or "softmodem" type. Its primary controller manages the traffic
with the CPU. But the software needed is specified in the Subsystem.
-----------------------------------------
Support type needed or chipset: slmodemd
An ALSA (Advanced Linux Sound Architecture) modem driver: snd-intel8x0m
provides Low Level support enabling contact with the modem hardware.
For all BUT Conexant chip soft modems (using hsfmodem software)
complementary High Level support is through a Smartlink utility: slmodemd
Download from http://linmodems.technion.ac.il/packages/smartlink/
the package SLMODEMD.gcc4.1.tar.gz having a compiled slmodemd. Unpack
under Linux with:
$ tar zxf SLMODEMD.gcc4.1.tar.gz
and read instructions therein. But briefly, the modem is setup with
command:
sudo slmodemd -c YOUR_COUNTRY --alsa modem:1
reporting dynamic creation of ports:
/dev/ttySL0 --> /dev/pts/N , with N some number
Read Smartlink.txt and Modem/YourSystem.txt for follow through guidance.
Already loaded into the kernel is snd-intel8x0m and audio drivers it
depends on,
displayed by: lsmod | grep snd_intel8x0m
Module Size Used by
-------------------------------------
snd_intel8x0m 18572 5
snd_ac97_codec 100644 4
snd_atiixp_modem,snd_via82xx_modem,snd_intel8x0m,snd_intel8x0
snd_pcm 80388 8
snd_atiixp_modem,snd_via82xx_modem,snd_intel8x0m,snd_intel8x0,snd_ac97_codec,snd_pcm_oss
snd 54660 23
snd_atiixp_modem,snd_via82xx_modem,snd_intel8x0m,snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
snd_page_alloc 11400 5
snd_atiixp_modem,snd_via82xx_modem,snd_intel8x0m,snd_intel8x0,snd_pcm
The diagnostic outputs for this softmodem section have their raw
information in
folders and text files under /proc/asound/ which you can browse. The
information
is from files:
/proc/asound/pcm
-------------------------------
00-04: Intel ICH - IEC958 : Intel 82801DB-ICH4 - IEC958 : playback 1
00-03: Intel ICH - ADC2 : Intel 82801DB-ICH4 - ADC2 : capture 1
00-02: Intel ICH - MIC2 ADC : Intel 82801DB-ICH4 - MIC2 ADC : capture 1
00-01: Intel ICH - MIC ADC : Intel 82801DB-ICH4 - MIC ADC : capture 1
00-00: Intel ICH : Intel 82801DB-ICH4 : playback 1 : capture 1
01-00: Intel ICH - Modem : Intel 82801DB-ICH4 Modem - Modem : playback 1
: capture 1
/proc/asound/modules
-------------------------------
0 snd_intel8x0
1 snd_intel8x0m
/proc/asound/card1/codec97#0/mc97#1-1+regs
-------------------------------
0:7c = 4243 and 0:7e = 4d64
which were translated from hexadecimal code into: BCM64
/proc/asound/card1/codec97#0/mc97#1-1
-------------------------------
Extended modem ID: codec=1 LIN1
and from the command:
aplay -l | grep -i modem
card 1: Modem [Intel 82801DB-ICH4 Modem], device 0: Intel ICH - Modem
[Intel 82801DB-ICH4 Modem - Modem]
----------------end Softmodem section --------------
Writing Intel.txt
Writing Smartlink.txt
============ end Smartlink section =====================
Completed candidate modem analyses.
The base of the UDEV device file system is: /dev/.udev
Versions adequately match for the compiler installed: 4.1.3
and the compiler used in kernel assembly: 4.1.3
Minimal compiling resources appear complete:
make utility - /usr/bin/make
Compiler version 4.1
linuc_headers base folder /lib/modules/2.6.22-14-generic/build
However some compilations and executable functions may need additional
files,
in the FileNames.h (so called kernel "h"eaders) collection installed
in /usr/include/ .
For martian_modem, additional required packages are libc6-dev (and for
Debian/Ubuntu, linux-libc-dev). The also required headers of package
libc6 are commonly installed by default.
If a driver compilation fails, with message including some lack of some
FileName.h (stdio.h for example), then
Some additional kernel-header files need installation to /usr/include.
The minimal additional packages are libc6-dev
and any of its dependents, under Ubuntu linux-libc-dev
If an alternate ethernet connection is available,
$ apt-get update
$ apt-get -s install linux-kernel-devel
will install needed pacakage
For Debian/Ubuntu related distributions, run the following command to
display the needed package list:
Otherwise packages have to be found through http://packages.ubuntu.com
Once downloaded and transferred into a Linux partition,
they can be installed alltogether with:
$ sudo dpkg -i *.deb
Checking pppd properties:
-rwsr-xr-- 1 root dip 269256 2007-10-05 08:57 /usr/sbin/pppd
In case of an "error 17" "serial loopback" problem, see:
http://phep2.technion.ac.il/linmodems/archive-sixth/msg02637.html
To enable dialout without Root permission do:
$ su - root (not for Ubuntu)
sudo chmod a+x /usr/sbin/pppd
or under Ubuntu related Linuxes
sudo chmod a+x /usr/sbin/pppd
Checking settings of: /etc/ppp/options
asyncmap 0
noauth
crtscts
lock
hide-password
modem
proxyarp
lcp-echo-interval 30
lcp-echo-failure 4
noipx
In case of a message like:
Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html
Read Modem/YourSystem.txt concerning other COMM channels: eth0
Which can interfere with Browser naviagation.
Don't worry about the following, it is for the experts
should trouble shooting be necessary.
==========================================================
# start/stop the daemon when the USB modem is connected
KERNEL=="slusb[0-9]*", GROUP="dialout", RUN+="/etc/init.d/sl-modem-daemon"
Checking for modem support lines:
--------------------------------------
/device/modem symbolic link: lrwxrwxrwx 1 root root 6 2008-01-29
20:10 /dev/modem -> ttySL0
slmodemd created symbolic link /dev/ttySL0: lrwxrwxrwx 1 root root 10
2008-01-29 20:10 /dev/ttySL0 -> /dev/pts/0
Within /etc/udev/ files:
/etc/udev/rules.d/030_sl-modem-daemon.rules:# start/stop the daemon when
the USB modem is connected
/etc/udev/rules.d/030_sl-modem-daemon.rules:KERNEL=="slusb[0-9]*",
GROUP="dialout", RUN+="/etc/init.d/sl-modem-daemon"
/etc/udev/sl-modem-daemon.rules:# start/stop the daemon when the USB
modem is connected
/etc/udev/sl-modem-daemon.rules:KERNEL=="slusb[0-9]*", GROUP="dialout",
RUN+="/etc/init.d/sl-modem-daemon"
Within /etc/modprobe.conf files:
/etc/modprobe.d/blacklist-modem:# Uncomment these entries in order to
blacklist unwanted modem drivers
/etc/modprobe.d/blacklist-modem:# blacklist snd-atiixp-modem
/etc/modprobe.d/blacklist-modem:# blacklist snd-via82xx-modem
/etc/modprobe.d/alsa-base:options snd-atiixp-modem index=-2
/etc/modprobe.d/alsa-base:options snd-via82xx-modem index=-2
/etc/modprobe.d/sl-modem-daemon.modutils:install slamr modprobe
--ignore-install ungrab-winmodem ; modprobe --ignore-install slamr;
test -e /dev/slamr0 || (/bin/mknod -m 660 /dev/slamr0 c 242 0
2>/dev/null && chgrp dialout /dev/slamr0)
Within any ancient /etc/devfs files:
Within ancient kernel 2.4.n /etc/module.conf files:
--------- end modem support lines --------
