Well this is the output (ModemData.txt) generated with the new version
of scanmodem that you sent to me. Neverthless writing the command “sudo
modprobe snd-intel8x0m” nothing happens.
Please note that I've installed the “sm-modem-daemon package”, maybe
this could be a useful information for you. Please tell if I’ve got to
uninstall this package.
Finally I don't understand what exactly I have to do with this part of
the output:
Download from http://linmodems.technion.ac.il/packages/smartlink/
the package SLMODEMD.gcc4.1.tar.gz having a compiled slmodemd. Unpack
under Linux with:
$ tar zxf SLMODEMD.gcc4.1.tar.gz
and read instructions therein. But briefly, the modem is setup with
command:
sudo slmodemd -c YOUR_COUNTRY --alsa modem:1
reporting dynamic creation of ports:
/dev/ttySL0 --> /dev/pts/N , with N some number
Read Smartlink.txt and Modem/YourSystem.txt for follow through guidance
My questions are:
1) what does it mean “having a compiled slmodemd”?
2) instead from the word “but briefly, the modem......” to the end of
the text, I didn't understand anything
Thanks!!!
Only plain text email is forwarded by the Discuss@xxxxxxxxxxxxx List Server,
as HTML can contain viruses. Use as the email Subject Line:
YourName, YourCountry kernel 2.6.20-16-generic
With this Subject Line cogent experts will be alerted, and useful case names left in the Archive.
YourCountry will enable Country specific guidance. Your contry's local Linux experts
can be found through: http://www.linux.org/groups/index.html.
They will know your Country's modem code, which may be essential for dialup service.
Responses from Discuss@xxxxxxxxxxxxx are sometimes blocked by an Internet Provider mail filters.
So in a day, also check the Archived responses at http://www.linmodems.org
-------------------------- System information ----------------------------
CPU=i686,
Linux version 2.6.20-16-generic (root@terranova) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 SMP Fri Aug 31 00:55:27 UTC 2007
scanModem update of: 2008_01_22
The modem symbolic link is /dev/modem -> ttySL0
The slmodemd set symbolic link is /dev/ttySL0 -> /dev/pts/0
There are no blacklisted modem drivers in /etc/modprobe* files
The Advanced Linux Sound Architecture (ALSA) packages providing audio support,
also includes drivers for some modems. The ALSA diagnostics are written during
bootup to /proc/asound/ folders.
The /proc/asound/ audio+modem diagostics are being copied.
Finished copy to Modem/ALSAdanlinux.tgz
The ALSA verion is 1.0.13
The modem cards detected by "aplay -l" are:
scheda 1: Modem [Intel ICH6 Modem], dispositivo 0: Intel ICH - Modem [Intel ICH6 Modem - Modem]
The /proc/asound/pcm file reports:
-----------------------
00-04: Intel ICH - IEC958 : Intel ICH6 - IEC958 : playback 1
00-03: Intel ICH - ADC2 : Intel ICH6 - ADC2 : capture 1
00-02: Intel ICH - MIC2 ADC : Intel ICH6 - MIC2 ADC : capture 1
00-01: Intel ICH - MIC ADC : Intel ICH6 - MIC ADC : capture 1
00-00: Intel ICH : Intel ICH6 : playback 1 : capture 1
01-00: Intel ICH - Modem : Intel ICH6 Modem - Modem : playback 1 : capture 1
about /proc/asound/cards:
------------------------
0 [ICH6 ]: ICH4 - Intel ICH6
Intel ICH6 with AD1981B at 0xb0040800, irq 16
1 [Modem ]: ICH-MODEM - Intel ICH6 Modem
Intel ICH6 Modem at 0x2400, irq 18
Modem firmware information is in /proc/asound/card1/codec97#0/mc97#1-1
-----------------------------------------------
Extended modem ID: codec=1 LIN1
Lines in: /proc/asound/card1/codec97#0/mc97#1-1+regs
-------------------------------
0:7c = 5349 and 0:7e = 4c27
are translated from hexadecimal code into the modem chip identifier: SIL27
USB modem not detected by lsusb
For candidate card in slot 00:1e.3, firmware information and bootup diagnostics are:
PCI slot PCI ID SubsystemID Name
---------- --------- --------- --------------
00:1e.3 8086:266d 103c:309d Modem: Intel Corporation 82801FB/FBM/FR/FW/FRW
Modem interrupt assignment and sharing:
18: 1 IO-APIC-fasteoi eth0, ipw2200, Intel ICH6 Modem
--- Bootup diagnostics for card in PCI slot 00:1e.3 ----
[ 12.171631] ACPI: PCI Interrupt 0000:00:1e.3[B] -> GSI 20 (level, low) -> IRQ 18
[ 12.171674] ACPI: PCI interrupt for device 0000:00:1e.3 disabled
[ 31.264000] ACPI: PCI Interrupt 0000:00:1e.3[B] -> GSI 20 (level, low) -> IRQ 18
[ 31.264000] PCI: Setting latency timer of device 0000:00:1e.3 to 64
The PCI slot 00:1e.3 of the modem card may be disabled early in
a bootup process, but then enabled later. If modem drivers load
but the modem is not responsive, read Bootup.txt about possible fixes.
Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx
if help is needed.
=== Finished modem firmware and bootup diagnostics section. ===
=== Next deducing cogent software ===
For candidate modem in PCI bus: 00:1e.3
Class 0703: 8086:266d Modem: Intel Corporation 82801FB/FBM/FR/FW/FRW
Primary PCI_id 8086:266d
Subsystem PCI_id 103c:309d
Softmodem codec or chipset from diagnostics: SIL27, an LSI/AgereSystems type
from Archives: SIL27, an LSI/AgereSystems type
Lacking a dsp (digital signal processing) chip, the modem is a software
intensive or "softmodem" type. Its primary controller manages the traffic
with the CPU. But the software needed is specified in the Subsystem.
-----------------------------------------
Support type needed or chipset: slmodemd
An ALSA (Advanced Linux Sound Architecture) modem driver: snd-intel8x0m
provides Low Level support enabling contact with the modem hardware.
For all BUT Conexant chip soft modems (using hsfmodem software)
complementary High Level support is through a Smartlink utility: slmodemd
Download from http://linmodems.technion.ac.il/packages/smartlink/
the package SLMODEMD.gcc4.1.tar.gz having a compiled slmodemd. Unpack under Linux with:
$ tar zxf SLMODEMD.gcc4.1.tar.gz
and read instructions therein. But briefly, the modem is setup with command:
sudo slmodemd -c YOUR_COUNTRY --alsa modem:1
reporting dynamic creation of ports:
/dev/ttySL0 --> /dev/pts/N , with N some number
Read Smartlink.txt and Modem/YourSystem.txt for follow through guidance.
----------------end Softmodem section --------------
Writing Intel.txt
Writing Smartlink.txt
============ end Smartlink section =====================
Completed candidate modem analyses.
The base of the UDEV device file system is: /dev/.udev
Versions adequately match for the compiler installed: 4.1.2
and the compiler used in kernel assembly: 4.1.2
Minimal compiling resources appear complete:
make utility - /usr/bin/make
Compiler version 4.1
linuc_headers base folder /lib/modules/2.6.20-16-generic/build
However some compilations and executable functions may need additional files,
in the FileNames.h (so called kernel "h"eaders) collection installed in /usr/include/ .
For martian_modem, additional required packages are libc6-dev (and for Debian/Ubuntu, linux-libc-dev). The also required headers of package libc6 are commonly installed by default.
If a driver compilation fails, with message including some lack of some FileName.h (stdio.h for example), then
Some additional kernel-header files need installation to /usr/include. The minimal additional packages are libc6-dev
and any of its dependents, under Ubuntu linux-libc-dev
If an alternate ethernet connection is available,
$ apt-get update
$ apt-get -s install linux-kernel-devel
will install needed package
For Debian/Ubuntu related distributions, run the following command to display the needed package list:
Otherwise packages have to be found through http://packages.ubuntu.com
Once downloaded and transferred into a Linux partition,
they can be installed alltogether with:
$ sudo dpkg -i *.deb
Checking pppd properties:
-rwsr-xr-- 1 root dip 269224 2007-04-05 05:41 /usr/sbin/pppd
In case of an "error 17" "serial loopback" problem, see:
http://phep2.technion.ac.il/linmodems/archive-sixth/msg02637.html
To enable dialout without Root permission do:
$ su - root (not for Ubuntu)
sudo chmod a+x /usr/sbin/pppd
or under Ubuntu related Linuxes
sudo chmod a+x /usr/sbin/pppd
Checking settings of: /etc/ppp/options
asyncmap 0
noauth
crtscts
lock
hide-password
modem
proxyarp
lcp-echo-interval 30
lcp-echo-failure 4
noipx
In case of a message like:
Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html
Read Modem/YourSystem.txt concerning other COMM channels: eth0 eth1 eth0:avah eth1:avah
Which can interfere with Browser naviagation.
Don't worry about the following, it is for the experts
should trouble shooting be necessary.
==========================================================
# start/stop the daemon when the USB modem is connected
KERNEL=="slusb[0-9]*", GROUP="dialout", RUN+="/etc/init.d/sl-modem-daemon"
Checking for modem support lines:
--------------------------------------
/device/modem symbolic link: lrwxrwxrwx 1 root root 6 2008-01-25 19:11 /dev/modem -> ttySL0
slmodemd created symbolic link /dev/ttySL0: lrwxrwxrwx 1 root root 10 2008-01-25 19:11 /dev/ttySL0 -> /dev/pts/0
Within /etc/udev/ files:
/etc/udev/rules.d/030_sl-modem-daemon.rules:# start/stop the daemon when the USB modem is connected
/etc/udev/rules.d/030_sl-modem-daemon.rules:KERNEL=="slusb[0-9]*", GROUP="dialout", RUN+="/etc/init.d/sl-modem-daemon"
/etc/udev/sl-modem-daemon.rules:# start/stop the daemon when the USB modem is connected
/etc/udev/sl-modem-daemon.rules:KERNEL=="slusb[0-9]*", GROUP="dialout", RUN+="/etc/init.d/sl-modem-daemon"
Within /etc/modprobe.conf files:
/etc/modprobe.d/alsa-base:options snd-atiixp-modem index=-2
/etc/modprobe.d/alsa-base:options snd-via82xx-modem index=-2
/etc/modprobe.d/sl-modem-daemon.modutils:install slamr modprobe --ignore-install ungrab-winmodem ; modprobe --ignore-install slamr; test -e /dev/slamr0 || (/bin/mknod -m 660 /dev/slamr0 c 242 0 2>/dev/null && chgrp dialout /dev/slamr0)
/etc/modprobe.d/blacklist-modem:# Uncomment these entries in order to blacklist unwanted modem drivers
/etc/modprobe.d/blacklist-modem:# blacklist snd-atiixp-modem
/etc/modprobe.d/blacklist-modem:# blacklist snd-via82xx-modem
Within any ancient /etc/devfs files:
Within ancient kernel 2.4.n /etc/module.conf files:
--------- end modem support lines --------
