Mio,
Primary PCI_id 8086:266d
Subsystem PCI_id 103c:309d
Softmodem codec or chipset from diagnostics:
from Archives: SIL27, an LSI/AgereSystems type
However
[ 7.508625] ACPI: PCI interrupt for device 0000:00:1e.3 disabled
explains the failure
Softmodem codec or chipset from diagnostics: <<< Output should be here
additionally in:
/proc/asound/modules
-------------------------------
0 snd_intel8x0
there should have been the modem driver:
snd_intel8x0m
Go ahead with:
----------------------
Download from http://linmodems.technion.ac.il/packages/smartlink/
the package SLMODEMD.gcc4.1.tar.gz having a compiled slmodemd. Unpack
under Linux with:
$ tar zxf SLMODEMD.gcc4.1.tar.gz
and read instructions therein. But briefly, the modem is setup with command:
sudo slmodemd -c YOUR_COUNTRY --alsa modem:1
reporting dynamic creation of ports:
/dev/ttySL0 --> /dev/pts/N , with N some number
Read Smartlink.txt and Modem/YourSystem.txt for follow through guidance.
-----------------------
But I'll send you another scanModem update.
Before you use it, please do:
$ sudo modprobe snd-intel8x0m
Then run the new scanModem and send us the ModemData.txt
MarvS
scanModem maintainer
On Jan 24, 2008 9:00 AM, Mio Tiscali <likesuicide@xxxxxxxxxx> wrote:
>
> My dial-up connection doesn't work under linux: help!!!!
>
> Please note that I'm a beginner in using Linux, so explain what I've to
> do easier as possibile.
>
> So this is the modemData.txt file created with scanmodem.
>
>
>
>
>
> and from the command:
> aplay -l | grep -i modem
>
>
> ----------------end Softmodem section --------------
>
> Writing Intel.txt
> Writing Smartlink.txt
> ============ end Smartlink section =====================
>
> Completed candidate modem analyses.
>
> Only plain text email is forwarded by the Discuss@xxxxxxxxxxxxx List Server,
> as HTML can contain viruses. Use as the email Subject Line:
> YourName, YourCountry kernel 2.6.20-16-generic
> With this Subject Line cogent experts will be alerted, and useful case names left in the Archive.
> YourCountry will enable Country specific guidance. Your contry's local Linux experts
> can be found through: http://www.linux.org/groups/index.html
> Responses from Discuss@xxxxxxxxxxxxx are sometimes blocked by an Internet Provider mail filters.
> So in a day, also check the Archived responses at http://www.linmodems.org
> -------------------------- System information ----------------------------
> CPU=i686,
> Linux version 2.6.20-16-generic (root@terranova) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 SMP Fri Aug 31 00:55:27 UTC 2007
> scanModem update of: 20071109
>
>
> The base of the UDEV device file system is: /dev/.udev
>
> Versions adequately match for the compiler installed: 4.1.2
> and the compiler used in kernel assembly: 4.1.2
>
> Summary card and chipset information is in:
> /proc/asound/cards:
> 0 [ICH6 ]: ICH4 - Intel ICH6
> Intel ICH6 with AD1981B at 0xb0040800, irq 16
>
> /proc/asound/pcm:
> 00-04: Intel ICH - IEC958 : Intel ICH6 - IEC958 : playback 1
> 00-03: Intel ICH - ADC2 : Intel ICH6 - ADC2 : capture 1
> 00-02: Intel ICH - MIC2 ADC : Intel ICH6 - MIC2 ADC : capture 1
> 00-01: Intel ICH - MIC ADC : Intel ICH6 - MIC ADC : capture 1
> 00-00: Intel ICH : Intel ICH6 : playback 1 : capture 1
>
>
>
> Minimal compiling resources appear complete:
> make utility - /usr/bin/make
> Compiler version 4.1
> linuc_headers base folder /lib/modules/2.6.20-16-generic/build
>
> However some compilations and executable functions may need additional files,
> in the FileNames.h (so called kernel "h"eaders) collection installed in /usr/include/ .
> For martian_modem, additional required packages are libc6-dev (and for Debian/Ubuntu, linux-libc-dev). The also required headers of package libc6 are commonly installed by default.
>
>
>
> If a driver compilation fails, with message including some lack of some FileName.h (stdio.h for example), then
> Some additional kernel-header files need installation to /usr/include. The minimal additional packages are libc6-dev
> and any of its dependents, under Ubuntu linux-libc-dev
>
> If an alternate ethernet connection is available,
> $ apt-get update
> $ apt-get -s install linux-kernel-devel
> will install needed pacakage
> For Debian/Ubuntu related distributions, run the following command to display the needed package list:
>
> Otherwise packages have to be found through http://packages.ubuntu.com
> Once downloaded and transferred into a Linux partition,
> they can be installed alltogether with:
> $ sudo dpkg -i *.deb
>
>
> Checking pppd properties:
> -rwsr-xr-- 1 root dip 269224 2007-04-05 05:41 /usr/sbin/pppd
>
> In case of an "error 17" "serial loopback" problem, see:
> http://phep2.technion.ac.il/linmodems/archive-sixth/msg02637.html
>
> To enable dialout without Root permission do:
> $ su - root (not for Ubuntu)
> sudo chmod a+x /usr/sbin/pppd
> or under Ubuntu related Linuxes
> sudo chmod a+x /usr/sbin/pppd
>
> Checking settings of: /etc/ppp/options
> asyncmap 0
> noauth
> crtscts
> lock
> hide-password
> modem
> proxyarp
> lcp-echo-interval 30
> lcp-echo-failure 4
> noipx
>
> In case of a message like:
> Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
> see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html
>
> Read Modem/YourSystem.txt concerning other COMM channels: eth0 eth1 eth0:avah eth1:avah
> Which can interfere with Browser naviagation.
>
> Don't worry about the following, it is for the experts
> should trouble shooting be necessary.
> ==========================================================
>
> Checking for modem support lines:
> --------------------------------------
> /device/modem symbolic link:
> slmodemd created symbolic link /dev/ttySL0:
> Within /etc/udev/ files:
>
> Within /etc/modprobe.conf files:
> /etc/modprobe.d/alsa-base:options snd-atiixp-modem index=-2
> /etc/modprobe.d/alsa-base:options snd-via82xx-modem index=-2
> /etc/modprobe.d/blacklist-modem:# Uncomment these entries in order to blacklist unwanted modem drivers
> /etc/modprobe.d/blacklist-modem:# blacklist snd-atiixp-modem
> /etc/modprobe.d/blacklist-modem:# blacklist snd-via82xx-modem
> Within any ancient /etc/devfs files:
>
> Within ancient kernel 2.4.n /etc/module.conf files:
>
> --------- end modem support lines --------
>
> A copy of /proc/asound had been copied to Modem/ALSAdanlinux.tgz
> There are no blacklisted modem drivers in /etc/modprobe* files
> USB modem not detected by lsusb
>
>
> The Advanced Linux Sound Architecture (ALSA) packages providing audio support on your System,
> also includes drivers for some modems. High Definition Audio (HDA) cards can themselves host
> a softmodem chipset, with both audio+modem supported by a snd-hda-intel driver.
> The ALSA diagnostics are written during bootup to /proc/asound/ folders.
>
>
> Modem not detected though HDA card diagnostics, though not excluding
> a possible Conexant modem chip impervious to ALSA diagnostics.
> Proceeding through alternative possibilties.
>
> Summary card and chipset information is in:
> /proc/asound/cards:
> 0 [ICH6 ]: ICH4 - Intel ICH6
> Intel ICH6 with AD1981B at 0xb0040800, irq 16
>
> /proc/asound/pcm:
> 00-04: Intel ICH - IEC958 : Intel ICH6 - IEC958 : playback 1
> 00-03: Intel ICH - ADC2 : Intel ICH6 - ADC2 : capture 1
> 00-02: Intel ICH - MIC2 ADC : Intel ICH6 - MIC2 ADC : capture 1
> 00-01: Intel ICH - MIC ADC : Intel ICH6 - MIC ADC : capture 1
> 00-00: Intel ICH : Intel ICH6 : playback 1 : capture 1
>
> For candidate card, firmware information and bootup diagnostics are:
>
> PCI slot PCI ID SubsystemID Name
> ---------- --------- --------- --------------
> 00:1e.3 8086:266d 103c:309d Modem: Intel Corporation 82801FB/FBM/FR/FW/FRW
>
> Modem interrupt assignment and sharing:
> 18: 1 IO-APIC-fasteoi eth0, ipw2200
> --- Bootup diagnostics for card in PCI slot 00:1e.3 ----
> [ 7.508615] ACPI: PCI Interrupt 0000:00:1e.3[B] -> GSI 20 (level, low) -> IRQ 18
> [ 7.508625] ACPI: PCI interrupt for device 0000:00:1e.3 disabled
>
> The PCI slot 00:1e.3 of the modem card may be disabled early in
> a bootup process, but then enabled later. If modem drivers load
> but the modem is not responsive, read Bootup.txt about possible fixes.
> Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx
> if help is needed.
>
>
> === Finished modem firmware and bootup diagnostics section. ===
> === Next deducing cogent software ===
>
> A copy of /proc/asound had been copied to Modem/ALSAdanlinux.tgz
> USB modem not detected by lsusb
>
> For candidate card, firmware information and bootup diagnostics are:
>
> PCI slot PCI ID SubsystemID Name
> ---------- --------- --------- --------------
> 00:1e.3 8086:266d 103c:309d Modem: Intel Corporation 82801FB/FBM/FR/FW/FRW
>
> Modem interrupt assignment and sharing:
> 18: 1 IO-APIC-fasteoi eth0, ipw2200
>
> There is candidate modem software.
>
> --- Bootup diagnostics for card in PCI slot 00:1e.3 ----
> [ 7.508615] ACPI: PCI Interrupt 0000:00:1e.3[B] -> GSI 20 (level, low) -> IRQ 18
> [ 7.508625] ACPI: PCI interrupt for device 0000:00:1e.3 disabled
> For candidate modem in PCI bus: 00:1e.3
> Class 0703: 8086:266d Modem: Intel Corporation 82801FB/FBM/FR/FW/FRW
> Primary PCI_id 8086:266d
> Subsystem PCI_id 103c:309d
> Softmodem codec or chipset from diagnostics:
> from Archives: SIL27, an LSI/AgereSystems type.
>
>
> Lacking a dsp (digital signal processing) chip, the modem is a software
> intensive or "softmodem" type. Its primary controller manages the traffic
> with the CPU. But the software needed is specified in the Subsystem.
> -----------------------------------------
> Support type needed or chipset: slmodemd
>
> An ALSA (Advanced Linux Sound Architecture) modem driver: snd-intel8x0m
> provides Low Level support enabling contact with the modem hardware.
> For all BUT Conexant chip soft modems (using hsfmodem software)
> complementary High Level support is through a Smartlink utility: slmodemd
>
> Download from http://linmodems.technion.ac.il/packages/smartlink/
> the package SLMODEMD.gcc4.1.tar.gz having a compiled slmodemd. Unpack under Linux with:
> $ tar zxf SLMODEMD.gcc4.1.tar.gz
> and read instructions therein. But briefly, the modem is setup with command:
> sudo slmodemd -c YOUR_COUNTRY --alsa modem:1
> reporting dynamic creation of ports:
> /dev/ttySL0 --> /dev/pts/N , with N some number
> Read Smartlink.txt and Modem/YourSystem.txt for follow through guidance.
>
>
> The PCI slot 00:1e.3 of the modem card may be disabled early in
> a bootup process, but then enabled later. If modem drivers load
> but the modem is not responsive, read Bootup.txt about possible fixes.
> Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx
> if help is needed.
>
>
> The diagnostic outputs for this softmodem section have their raw information in
> folders and text files under /proc/asound/ which you can browse. The information
> is from files:
> /proc/asound/pcm
> -------------------------------
> 00-04: Intel ICH - IEC958 : Intel ICH6 - IEC958 : playback 1
> 00-03: Intel ICH - ADC2 : Intel ICH6 - ADC2 : capture 1
> 00-02: Intel ICH - MIC2 ADC : Intel ICH6 - MIC2 ADC : capture 1
> 00-01: Intel ICH - MIC ADC : Intel ICH6 - MIC ADC : capture 1
> 00-00: Intel ICH : Intel ICH6 : playback 1 : capture 1
>
> /proc/asound/modules
> -------------------------------
> 0 snd_intel8x0
>
> === Finished modem firmware and bootup diagnostics section. ===
> === Next deducing cogent software ===
>
> and from the command:
> aplay -l | grep -i modem
>
>
> ----------------end Softmodem section --------------
>
> Writing Intel.txt
> Writing Smartlink.txt
> ============ end Smartlink section =====================
>
> Completed candidate modem analyses.
>
> The base of the UDEV device file system is: /dev/.udev
>
> Versions adequately match for the compiler installed: 4.1.2
> and the compiler used in kernel assembly: 4.1.2
>
>
>
> Minimal compiling resources appear complete:
> make utility - /usr/bin/make
> Compiler version 4.1
> linuc_headers base folder /lib/modules/2.6.20-16-generic/build
>
> However some compilations and executable functions may need additional files,
> in the FileNames.h (so called kernel "h"eaders) collection installed in /usr/include/ .
> For martian_modem, additional required packages are libc6-dev (and for Debian/Ubuntu, linux-libc-dev). The also required headers of package libc6 are commonly installed by default.
>
>
>
> If a driver compilation fails, with message including some lack of some FileName.h (stdio.h for example), then
> Some additional kernel-header files need installation to /usr/include. The minimal additional packages are libc6-dev
> and any of its dependents, under Ubuntu linux-libc-dev
>
> If an alternate ethernet connection is available,
> $ apt-get update
> $ apt-get -s install linux-kernel-devel
> will install needed pacakage
> For Debian/Ubuntu related distributions, run the following command to display the needed package list:
>
> Otherwise packages have to be found through http://packages.ubuntu.com
> Once downloaded and transferred into a Linux partition,
> they can be installed alltogether with:
> $ sudo dpkg -i *.deb
>
>
> Checking pppd properties:
> -rwsr-xr-- 1 root dip 269224 2007-04-05 05:41 /usr/sbin/pppd
>
> In case of an "error 17" "serial loopback" problem, see:
> http://phep2.technion.ac.il/linmodems/archive-sixth/msg02637.html
>
> To enable dialout without Root permission do:
> $ su - root (not for Ubuntu)
> sudo chmod a+x /usr/sbin/pppd
> or under Ubuntu related Linuxes
> sudo chmod a+x /usr/sbin/pppd
>
> Checking settings of: /etc/ppp/options
> asyncmap 0
> noauth
> crtscts
> lock
> hide-password
> modem
> proxyarp
> lcp-echo-interval 30
> lcp-echo-failure 4
> noipx
>
> In case of a message like:
> Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
> see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html
>
> Read Modem/YourSystem.txt concerning other COMM channels: eth0 eth1 eth0:avah eth1:avah
> Which can interfere with Browser naviagation.
>
> Don't worry about the following, it is for the experts
> should trouble shooting be necessary.
> ==========================================================
>
> Checking for modem support lines:
> --------------------------------------
> /device/modem symbolic link:
> slmodemd created symbolic link /dev/ttySL0:
> Within /etc/udev/ files:
>
> Within /etc/modprobe.conf files:
> /etc/modprobe.d/alsa-base:options snd-atiixp-modem index=-2
> /etc/modprobe.d/alsa-base:options snd-via82xx-modem index=-2
> /etc/modprobe.d/blacklist-modem:# Uncomment these entries in order to blacklist unwanted modem drivers
> /etc/modprobe.d/blacklist-modem:# blacklist snd-atiixp-modem
> /etc/modprobe.d/blacklist-modem:# blacklist snd-via82xx-modem
> Within any ancient /etc/devfs files:
>
> Within ancient kernel 2.4.n /etc/module.conf files:
>
> --------- end modem support lines --------
>
>
> There is candidate modem software.
>
> For candidate modem in PCI bus: 00:1e.3
> Class 0703: 8086:266d Modem: Intel Corporation 82801FB/FBM/FR/FW/FRW
> Primary PCI_id 8086:266d
> Subsystem PCI_id 103c:309d
> Softmodem codec or chipset from diagnostics:
> from Archives: SIL27, an LSI/AgereSystems type.
>
>
> Lacking a dsp (digital signal processing) chip, the modem is a software
> intensive or "softmodem" type. Its primary controller manages the traffic
> with the CPU. But the software needed is specified in the Subsystem.
> -----------------------------------------
> Support type needed or chipset: slmodemd
>
> An ALSA (Advanced Linux Sound Architecture) modem driver: snd-intel8x0m
> provides Low Level support enabling contact with the modem hardware.
> For all BUT Conexant chip soft modems (using hsfmodem software)
> complementary High Level support is through a Smartlink utility: slmodemd
>
> Download from http://linmodems.technion.ac.il/packages/smartlink/
> the package SLMODEMD.gcc4.1.tar.gz having a compiled slmodemd. Unpack under Linux with:
> $ tar zxf SLMODEMD.gcc4.1.tar.gz
> and read instructions therein. But briefly, the modem is setup with command:
> sudo slmodemd -c YOUR_COUNTRY --alsa modem:1
> reporting dynamic creation of ports:
> /dev/ttySL0 --> /dev/pts/N , with N some number
> Read Smartlink.txt and Modem/YourSystem.txt for follow through guidance.
>
>
> The diagnostic outputs for this softmodem section have their raw information in
> folders and text files under /proc/asound/ which you can browse. The information
> is from files:
> /proc/asound/pcm
> -------------------------------
> 00-04: Intel ICH - IEC958 : Intel ICH6 - IEC958 : playback 1
> 00-03: Intel ICH - ADC2 : Intel ICH6 - ADC2 : capture 1
> 00-02: Intel ICH - MIC2 ADC : Intel ICH6 - MIC2 ADC : capture 1
> 00-01: Intel ICH - MIC ADC : Intel ICH6 - MIC ADC : capture 1
> 00-00: Intel ICH : Intel ICH6 : playback 1 : capture 1
>
> /proc/asound/modules
> -------------------------------
> 0 snd_intel8x0
> and from the command:
> aplay -l | grep -i modem
>
>
> ----------------end Softmodem section --------------
>
> Writing Intel.txt
> Writing Smartlink.txt
> ============ end Smartlink section =====================
>
> Completed candidate modem analyses.
>
> The base of the UDEV device file system is: /dev/.udev
>
> Versions adequately match for the compiler installed: 4.1.2
> and the compiler used in kernel assembly: 4.1.2
>
>
>
> Minimal compiling resources appear complete:
> make utility - /usr/bin/make
> Compiler version 4.1
> linuc_headers base folder /lib/modules/2.6.20-16-generic/build
>
> However some compilations and executable functions may need additional files,
> in the FileNames.h (so called kernel "h"eaders) collection installed in /usr/include/ .
> For martian_modem, additional required packages are libc6-dev (and for Debian/Ubuntu, linux-libc-dev). The also required headers of package libc6 are commonly installed by default.
>
>
>
> If a driver compilation fails, with message including some lack of some FileName.h (stdio.h for example), then
> Some additional kernel-header files need installation to /usr/include. The minimal additional packages are libc6-dev
> and any of its dependents, under Ubuntu linux-libc-dev
>
> If an alternate ethernet connection is available,
> $ apt-get update
> $ apt-get -s install linux-kernel-devel
> will install needed pacakage
> For Debian/Ubuntu related distributions, run the following command to display the needed package list:
>
> Otherwise packages have to be found through http://packages.ubuntu.com
> Once downloaded and transferred into a Linux partition,
> they can be installed alltogether with:
> $ sudo dpkg -i *.deb
>
>
> Checking pppd properties:
> -rwsr-xr-- 1 root dip 269224 2007-04-05 05:41 /usr/sbin/pppd
>
> In case of an "error 17" "serial loopback" problem, see:
> http://phep2.technion.ac.il/linmodems/archive-sixth/msg02637.html
>
> To enable dialout without Root permission do:
> $ su - root (not for Ubuntu)
> sudo chmod a+x /usr/sbin/pppd
> or under Ubuntu related Linuxes
> sudo chmod a+x /usr/sbin/pppd
>
> Checking settings of: /etc/ppp/options
> asyncmap 0
> noauth
> crtscts
> lock
> hide-password
> modem
> proxyarp
> lcp-echo-interval 30
> lcp-echo-failure 4
> noipx
>
> In case of a message like:
> Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
> see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html
>
> Read Modem/YourSystem.txt concerning other COMM channels: eth0 eth1 eth0:avah eth1:avah
> Which can interfere with Browser naviagation.
>
> Don't worry about the following, it is for the experts
> should trouble shooting be necessary.
> ==========================================================
>
> Checking for modem support lines:
> --------------------------------------
> /device/modem symbolic link:
> slmodemd created symbolic link /dev/ttySL0:
> Within /etc/udev/ files:
>
> Within /etc/modprobe.conf files:
> /etc/modprobe.d/alsa-base:options snd-atiixp-modem index=-2
> /etc/modprobe.d/alsa-base:options snd-via82xx-modem index=-2
> /etc/modprobe.d/blacklist-modem:# Uncomment these entries in order to blacklist unwanted modem drivers
> /etc/modprobe.d/blacklist-modem:# blacklist snd-atiixp-modem
> /etc/modprobe.d/blacklist-modem:# blacklist snd-via82xx-modem
> Within any ancient /etc/devfs files:
>
> Within ancient kernel 2.4.n /etc/module.conf files:
>
> --------- end modem support lines --------
>
>
>
>
