Sasha,
RE:
For this in amrmo_init.c line:
{ 0x1543, 3052, PCI_ANY_ID, PCI_ANY_ID, 0, 0, SL1900_CARD },
should be added somewhere in amrmo_pci_tbl structure.
Then build the driver, etc..
-------------
Thanks, understood.
Zoran,
I'll do the fix this evening and send it to you for testing
Read the SmartLink.txt you will using the
ungrab-winmodem + slamr driver combination
Download the slamr-2.6.20-15-generic.tar.gz from
http://phep2.technion.ac.il/linmodems/packages/smartlink/Ubuntu/
and start reading. Only the slamr.ko will have to be replaced.
MarvS
On Jan 23, 2008 2:48 AM, Sasha Khapyorsky <sashakh@xxxxxxxxx> wrote:
> Hi,
>
> On Dec 29, 2007 5:08 AM, Marvin Stodolsky <marvin.stodolsky@xxxxxxxxx> wrote:
> >
> > This is definitely a Motorola chipset modem of some type. From Microsoft:
> > 12-29-2007 02:09:55.953 - Modem type: Motorola SM56 Speakerphone Modem
> > 12-29-2007 02:09:55.953 - Modem inf path: oem6.inf
> > 12-29-2007 02:09:55.953 - Modem inf section: SM56_MODEM_INSTALL
> > 12-29-2007 02:09:55.953 - Matching hardware ID:
> > pci\ven_1543&dev_3052&subsys_30001543&rev_04
>
> According to PCI IDs it is Silicon Lab and not Motorola (but it is
> likely that Motorola provides software only in this case). IOW -
> unknown PCI device :(.
>
> > But
> > 1543:3052 1543:3000 Modem: SILICON Laboratories
> > is of a class we haven't seen before.
> >
> > The 3052 primary component is described here:
> > http://www.silabs.com/tgwWebApp/public/web_content/products/Wireline/Silicon_DAA/en/Si3052.htm
> >
> > and the Subsystem Si3000 which is presumable customizable for
> > Motorola, Intel, etc is described here:
> > http://www.silabs.com/tgwWebApp/public/web_content/products/Wireline/Voice_Codec/en/Si3000.htm
> >
> > Is there any possibility that this can be brought under slmodemd service??
>
> The only thing I could think about is to simulate SL1900 (which has
> the same device ID and AFAIK this device is originally developed by
> SL, but was distributes to various vendors with same device ID),
> probably it is the same device.
>
> For this in amrmo_init.c line:
>
> { 0x1543, 3052, PCI_ANY_ID, PCI_ANY_ID, 0, 0, SL1900_CARD },
>
> should be added somewhere in amrmo_pci_tbl structure.
> Then build the driver, etc..
>
> Sasha
>
