modemness

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hey,

Here is the modem data, I would really appreciate it if you could let me know what to do next. I attempted to follow the instructions and downloaded the slmodemd thing but when I typed in "slmodemd --alsa -c UK modem:1" like it said I should do, I ended up getting the following error message: 
 error: alsa setup: cannot open playback device 'modem:1' : Device or resource busy.
 error: cannot setup device 'modem:1'

I'm fairly new to all this so if you could help that would be great ^_^

Charlotte
_________________________________________________________________
Telly addicts unite!
http://www.searchgamesbox.com/tvtown.shtml
 Only plain text email is forwarded by the  Discuss@xxxxxxxxxxxxx List Server,
 as HTML can contain viruses. Use as the email Subject Line:
           YourName, YourCountry  kernel 2.6.22-14-generic 
 With this Subject Line cogent experts will be alerted, and useful case names left in the Archive.
 YourCountry will enable Country specific guidance. Your contry's local Linux experts
 can be found through: http://www.linux.org/groups/index.html
 Responses from Discuss@xxxxxxxxxxxxx are sometimes blocked by an Internet Provider mail filters.
 So in a day, also check the Archived responses at http://www.linmodems.org 
--------------------------  System information ----------------------------
CPU=i686,  
Linux version 2.6.22-14-generic (buildd@terranova) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Tue Dec 18 08:02:57 UTC 2007
 scanModem update of:  2007-12-07
The modem symbolic link is /dev/modem -> ttySL0
The slmodemd set symbolic link is /dev/ttySL0 -> /dev/pts/0

 There are no blacklisted modem drivers in /etc/modprobe*  files 

 Potentially useful modem drivers now loaded are:
 snd_atiixp_modem
snd_via82xx_modem
snd_intel8x0m


The Advanced Linux Sound Architecture (ALSA) packages providing audio support on your System, 
also includes drivers for some modems. High Definition Audio (HDA) cards can themselves host
a softmodem chipset, with both audio+modem supported by a snd-hda-intel driver.
The ALSA diagnostics are written during bootup to /proc/asound/ folders.


 Modem not detected though HDA card diagnostics, though not excluding
 a possible Conexant modem chip impervious to ALSA diagnostics. 
 Proceeding through alternative possibilties.

Summary card and chipset information is in: 
/proc/asound/cards:
 0 [SI7012         ]: ICH - SiS SI7012
                      SiS SI7012 with AD1981B at irq 5
 1 [Modem          ]: ICH-MODEM - SiS SI7013 Modem
                      SiS SI7013 Modem at irq 5

/proc/asound/pcm:
00-01: Intel ICH - MIC ADC : SiS SI7012 - MIC ADC : capture 1
00-00: Intel ICH : SiS SI7012 : playback 1 : capture 1
01-00: Intel ICH - Modem : SiS SI7013 Modem - Modem : playback 1 : capture 1

 A copy of /proc/asound had been copied to Modem/ALSArosina.tgz
USB modem not detected by lsusb

For candidate card, firmware information and bootup diagnostics are:

 PCI slot	PCI ID		SubsystemID	Name
 ----------	---------	---------	--------------
 00:02.6	1039:7013	1033:8216	Modem: Silicon Integrated Systems [SiS] AC'97 Modem Controller 

 Modem interrupt assignment and sharing: 
  5:         32    XT-PIC-XT        ohci1394, SiS SI7013 Modem, SiS SI7012
 --- Bootup diagnostics for card in PCI slot 00:02.6 ----
[   16.339593] ACPI: PCI Interrupt 0000:00:02.6[C] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5
[   16.339604] ACPI: PCI interrupt for device 0000:00:02.6 disabled
[   25.260000] ACPI: PCI Interrupt 0000:00:02.6[C] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5
[ 1251.888000] ACPI: PCI interrupt for device 0000:00:02.6 disabled
[ 1251.924000] ACPI: PCI Interrupt 0000:00:02.6[C] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5
[ 5261.176000] ACPI: PCI interrupt for device 0000:00:02.6 disabled
[ 5261.208000] ACPI: PCI Interrupt 0000:00:02.6[C] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5
[ 8589.092000] ACPI: PCI interrupt for device 0000:00:02.6 disabled
[ 8589.124000] ACPI: PCI Interrupt 0000:00:02.6[C] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5

 The PCI slot 00:02.6 of the modem card may be disabled early in 
 a bootup process,  but then enabled later. If modem drivers load 
 but the  modem is not responsive, read Bootup.txt about possible fixes.
 Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx
 if help is needed.
 

 === Finished modem firmware and bootup diagnostics section. ===
 === Next deducing cogent software ===


There is candidate modem software.

 For candidate modem in PCI bus:  00:02.6
   Class 0703: 1039:7013 Modem: Silicon Integrated Systems [SiS] AC'97 Modem Controller
      Primary PCI_id  1039:7013
    Subsystem PCI_id  1033:8216 
    Softmodem codec or chipset from diagnostics: SIL27, an LSI/AgereSystems type.
                               from    Archives: SIL27, an LSI/AgereSystems type.
                        

 Lacking a dsp (digital signal processing) chip, the modem is a software 
 intensive or "softmodem" type. Its primary controller manages the traffic 
 with the CPU. But the software needed is specified in the Subsystem.
 -----------------------------------------
Support type needed or chipset:	slmodemd

 An ALSA (Advanced Linux Sound Architecture) modem driver:  snd-intel8x0m
 provides Low Level support enabling contact with the modem hardware.
 For all BUT Conexant chip soft modems (using hsfmodem software)
 complementary High Level support is through a Smartlink utility:  slmodemd

 Download from http://linmodems.technion.ac.il/packages/smartlink/ 
 the package SLMODEMD.gcc4.1.tar.gz having a compiled slmodemd. Unpack under Linux with:
 	$ tar zxf SLMODEMD.gcc4.1.tar.gz
 and read instructions therein. But briefly, the modem is setup with command:
 	sudo slmodemd -c YOUR_COUNTRY --alsa modem:1
 reporting dynamic creation of ports:
	/dev/ttySL0 --> /dev/pts/N   , with N some number
 Read Smartlink.txt and Modem/YourSystem.txt for follow through guidance.

 Already loaded into the kernel is snd-intel8x0m and audio drivers it depends on,
 displayed by:	lsmod | grep snd_intel8x0m
Module                  Size  Used by
-------------------------------------
snd_intel8x0m          18572  5 
snd_ac97_codec        100644  4 snd_atiixp_modem,snd_via82xx_modem,snd_intel8x0m,snd_intel8x0
snd_pcm                80388  8 snd_atiixp_modem,snd_via82xx_modem,snd_intel8x0m,snd_intel8x0,snd_ac97_codec,snd_pcm_oss
snd                    54660  23 snd_atiixp_modem,snd_via82xx_modem,snd_intel8x0m,snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
snd_page_alloc         11400  5 snd_atiixp_modem,snd_via82xx_modem,snd_intel8x0m,snd_intel8x0,snd_pcm


The diagnostic outputs for this softmodem section have their raw information in
folders and text files under /proc/asound/ which you can browse. The information
is from files:
	/proc/asound/pcm
-------------------------------
00-01: Intel ICH - MIC ADC : SiS SI7012 - MIC ADC : capture 1
00-00: Intel ICH : SiS SI7012 : playback 1 : capture 1
01-00: Intel ICH - Modem : SiS SI7013 Modem - Modem : playback 1 : capture 1

	/proc/asound/modules
-------------------------------
 0 snd_intel8x0
 1 snd_intel8x0m
	/proc/asound/card1/codec97#0/mc97#1-1+regs
-------------------------------
0:7c = 5349  and  0:7e = 4c27
which were translated from hexadecimal code into:  SIL27

	/proc/asound/card1/codec97#0/mc97#1-1
-------------------------------
Extended modem ID: codec=1 LIN1

and from the command:
	aplay -l | grep -i modem
card 1: Modem [SiS SI7013 Modem], device 0: Intel ICH - Modem [SiS SI7013 Modem - Modem]

----------------end Softmodem section --------------

 Completed candidate modem analyses.

 The base of the UDEV device file system is: /dev/.udev

 Versions adequately match for the compiler installed: 4.1.3
             and the compiler used in kernel assembly: 4.1.3


 
 Minimal compiling resources appear complete:
   make utility - /usr/bin/make
   Compiler version 4.1
   linuc_headers base folder /lib/modules/2.6.22-14-generic/build

 However some compilations and executable functions may need additional files,
 in the FileNames.h (so called kernel "h"eaders) collection installed in  /usr/include/ .
 For martian_modem, additional required packages are libc6-dev (and for Debian/Ubuntu,  linux-libc-dev). The also required headers of package libc6 are commonly installed by default. 



If a driver compilation fails, with message including some lack of some FileName.h (stdio.h for example), then
Some additional kernel-header files need installation to /usr/include. The minimal additional packages are libc6-dev
and any of its dependents, under Ubuntu linux-libc-dev

If an alternate ethernet connection is available,
$  apt-get update
$  apt-get -s install linux-kernel-devel
will install needed pacakage
For Debian/Ubuntu related distributions, run the following command to display the needed package list:

Otherwise packages have to be found through http://packages.ubuntu.com
Once downloaded and transferred into a Linux partition,
they can be installed alltogether with:
$ sudo dpkg -i *.deb


Checking pppd properties:
	-rwsr-xr-- 1 root dip 269256 2007-10-04 20:57 /usr/sbin/pppd

In case of an "error 17" "serial loopback" problem, see:
    http://phep2.technion.ac.il/linmodems/archive-sixth/msg02637.html

To enable dialout without Root permission do:
	$ su - root  (not for Ubuntu)
        sudo chmod a+x /usr/sbin/pppd
or under Ubuntu related Linuxes
	sudo chmod a+x /usr/sbin/pppd

Checking settings of:	/etc/ppp/options
asyncmap 0
noauth
crtscts
lock
hide-password
modem
proxyarp
lcp-echo-interval 30
lcp-echo-failure 4
noipx

In case of a message like:
   Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html

Read Modem/YourSystem.txt concerning other COMM channels: eth0 eth1
Which can interfere with Browser naviagation.

 Don't worry about the following, it is for the experts
 should trouble shooting be necessary.
==========================================================

# start/stop the daemon when the USB modem is connected
KERNEL=="slusb[0-9]*", GROUP="dialout", RUN+="/etc/init.d/sl-modem-daemon"
 Checking for modem support lines:
 --------------------------------------
     /device/modem symbolic link:   lrwxrwxrwx 1 root root 6 2007-12-28 13:26 /dev/modem -> ttySL0
slmodemd created symbolic link /dev/ttySL0:  lrwxrwxrwx 1 root root 10 2007-12-28 13:26 /dev/ttySL0 -> /dev/pts/0
     Within /etc/udev/ files:
/etc/udev/rules.d/030_sl-modem-daemon.rules:# start/stop the daemon when the USB modem is connected
/etc/udev/rules.d/030_sl-modem-daemon.rules:KERNEL=="slusb[0-9]*", GROUP="dialout", RUN+="/etc/init.d/sl-modem-daemon"
/etc/udev/sl-modem-daemon.rules:# start/stop the daemon when the USB modem is connected
/etc/udev/sl-modem-daemon.rules:KERNEL=="slusb[0-9]*", GROUP="dialout", RUN+="/etc/init.d/sl-modem-daemon"
     Within /etc/modprobe.conf files:
/etc/modprobe.d/blacklist-modem:# Uncomment these entries in order to blacklist unwanted modem drivers
/etc/modprobe.d/blacklist-modem:# blacklist snd-atiixp-modem
/etc/modprobe.d/blacklist-modem:# blacklist snd-via82xx-modem
/etc/modprobe.d/sl-modem-daemon.modutils:install slamr modprobe --ignore-install ungrab-winmodem ;  modprobe --ignore-install slamr; test -e /dev/slamr0 || (/bin/mknod -m 660 /dev/slamr0 c 242 0 2>/dev/null && chgrp dialout /dev/slamr0) 
/etc/modprobe.d/alsa-base:options snd-atiixp-modem index=-2
/etc/modprobe.d/alsa-base:options snd-via82xx-modem index=-2
     Within any ancient /etc/devfs files:

     Within ancient kernel 2.4.n /etc/module.conf files:

--------- end modem support lines --------


[Index of Archives]     [Linux Media Development]     [Asterisk]     [DCCP]     [Netdev]     [X.org]     [Xfree86]     [Fedora Women]     [Linux USB]

  Powered by Linux