Pramuditha,
scanModem reports that you need
\begin{QUOTE}
For candidate modem in PCI bus: 0000:03:0b.0
Class 0780: 14f1:2045 Communication controller: Conexant HSF 56k
Data/Fax/Voice/Spkp
Primary PCI_id 14f1:2045
Support type needed or chipset: hsfmodem
For owners of a Dell PCs with Conexant HSF modems, a driver source
package with full speed enabled is available, but requires driver
compiling. Read Conexant.txt
The hsfmodem package serves a great variety of Conexant chipset modems.
From http://www.linuxant.com/drivers/hsf/full/downloads-ubuntu-x86.php
download hsfmodem_VersionSpec_k2.6.15_26_386_ubuntu_i386.deb.zip
with 2.6.15_26_386 equivalent to
2.6.15-26-386, your kernel version.
Under Linux unpack with:
$ unzip hsfmodem*.zip
Then install with:
$ sudo dpkg -i hsfmodem*.deb
Subsequently, the modem should be found with
$ sudo wvdialconf /etc/wvdial.conf
Edit in your personal information with:
$ sudo gedit /etc/wvdial.conf
and try dialing out with:
$ sudo wvdial.
See Testing.txt for details.
Read Conexant.txt
\end{QUOTE}
However you also have some "Modem interrupt assignment and sharing" problem
\begin{"}
Modem interrupt assignment and sharing:
15: 38367 IO-APIC-edge ide1
--- Bootup diagnostics for card in PCI slot 0000:03:0b.0 ----
\end{"}
Read Bootup.txt for a fix.
Regards,
Antonio
On 1/22/08, Pramuditha Perera <pramuperera@xxxxxxxxx> wrote:
> Hello,
> I'm a new linux user. I replaced my windows o/s with linux recently
> and the linux system doesn't recognize my modem. The reports I'm
> sending were generated when I was using "kubuntu". "modemdata.txt" is
> attached. At the moment I'm having "Mandrake Linux 9.14" installed.
> Please give me a solution. I'm from Sri Lanka.Thanx
>
> my email-
> pramuperera@xxxxxxxxx
>
>
