Davide,
You might be on the right track with using
SLMODEMD.4.1.tar.gz
I have checked on Linuxant page and it gives the
following:
INTEL AC-Link Controller (ICH)
# PCI ID 8086:7186
# PCI ID 8086:7196
# PCI ID 8086:2416
# PCI ID 8086:2446
# PCI ID 8086:2486
# PCI ID 8086:24C6
# PCI ID 8086:24D6
# PCI ID 8086:266D
# PCI ID 8086:2426
# PCI ID 10DE:00D9 (NVIDIA nForce3)
# PCI ID 10DE:01C1 (NVIDIA)
VIA AC-Link Controller
# PCI ID 1106:3068
ALI AC-Link Controller
# PCI ID {1025,10B9}:5453
# PCI ID {1025,10B9}:5457
The internal modem of HP omnibook xe4500 series
machines should work with this driver.
ATI AC-Link Controller
# PCI ID 1002:434D
# PCI ID 1002:4378
SIS AC-Link Controller
# PCI ID 1039:7013
As far as wvdial try changing wvdial.conf from what
you have in the init strings to what is specified in
wvdial.txt like
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
# Lack of dialtone acquisition can be due to low line
voltage,
# a common problem in Italy.
# Try inserting a "dial without waiting": X3
# Init2 = ATQ0 V1 E1 S0=0 X3 &C1 &D2 +FCLASS=0
# In case of connection instabilities, specify a
lower frequency:
# Init2 = ATQ0 V1 E1 S0=0 X3 &C1 &D2 +MS=34
# a MS=90 option is sometimes necessary for Internet
Providers with buggy V92 protocols:
# Init2 = ATQ0 V1 E1 S0=0 X3 &C1 &D2 +MS=90
Meaning instead of having the top line try the
following:
# Init2 = ATQ0 V1 E1 S0=0 X3 &C1 &D2 +MS=34
Report back if you are successful/unsuccesful.
Regards,
Antonio
On Jan 18, 2008 4:24 PM, Davide Rognoni
<davide.rognoni@xxxxxxxxx> wrote:
OK, I have a NO CARRIER error (X3 is the solution on
windows):
root@davide-laptop:/home/davide/Desktop/scanModem/SLMODEMD.gcc4.1#
./slmodemd --debug --alsa -c ITALY modem:0
SmartLink Soft Modem: version 2.9.11 Aug 6 2007
22:02:27
<680.660468> SmartLink Soft Modem: version 2.9.11
Aug 6 2007 22:02:27
<680.660518> modem:0: startup modem...
<680.660604> modem:0: update termios...
symbolic link `/dev/ttySL0' -> `/dev/pts/1' created.
modem `modem:0' created. TTY is `/dev/pts/1'
<680.661147> open file:
/var/lib/slmodem/data.modem:0...
<680.661541> main: rt applyed: SCHED_FIFO, pri 99
Use `/dev/ttySL0' as modem device, Ctrl+C for
termination.
<684.523022> main: termios changed.
<684.523039> modem:0: update termios...
<684.603114> main: termios changed.
<684.603128> modem:0: update termios...
<684.702980> modem:0: run cmd: ATZ
<684.702996> modem:0: modem reset...
<684.703001> modem:0: modem set state: 1 --> 1...
<684.703008> modem:0: modem set mode: -> 0...
<684.703013> modem:0: modem report result: 0 (OK)
<684.803022> modem:0: run cmd:
ATQ0V1E1S0=0&C1&D2+FCLASS=0
<684.803047> modem:0: modem set mode: -> 0...
<684.803052> modem:0: modem report result: 0 (OK)
<684.902980> modem:0: run cmd: ATX3
<684.902994> modem:0: modem report result: 0 (OK)
<685.002978> modem:0: run cmd: ATL2
<685.002996> main: alsa_ioctl: cmd 8, arg 0...
<685.003002> modem:0: modem report result: 0 (OK)
<685.103436> modem:0: run cmd: ATX3DT7020187187
<685.103458> modem:0: modem dial: T7020187187...
<685.103463> modem:0: modem_dial_start...
<685.103486> modem:0: modem_start..
<685.103491> modem:0: modem set state: 1 --> 2...
<685.103497> modem:0: new state: DP_ESTAB
<685.103501> main: alsa_ioctl: cmd 8, arg 2...
<685.103506> modem:0: modem set hook: 0 --> 1...
<685.103511> main: alsa_ioctl: cmd 2, arg 1...
<685.110905> main: alsa_ioctl: cmd 11, arg 0...
<685.111025> main: alsa_ioctl: cmd 4, arg 2580...
<685.111031> main: alsa_ioctl: cmd 7, arg 30...
<685.111036> main: alsa_start...
Hooks PCM
Its setup is:
stream : PLAYBACK
access : RW_INTERLEAVED
format : S16_LE
subformat : STD
channels : 1
rate : 9600
exact rate : 9600 (9600/1)
msbits : 16
buffer_size : 2048
period_size : 64
period_time : 6666
tick_time : 4000
tstamp_mode : NONE
period_step : 1
sleep_min : 0
avail_min : 4
xfer_align : 4
start_threshold : 2147483647
stop_threshold : 2048
silence_threshold: 0
silence_size : 0
boundary : 1073741824
Slave: Hardware PCM card 0 'HDA Intel' device 6
subdevice 0
Its setup is:
stream : PLAYBACK
access : RW_INTERLEAVED
format : S16_LE
subformat : STD
channels : 1
rate : 9600
exact rate : 9600 (9600/1)
msbits : 16
buffer_size : 2048
period_size : 64
period_time : 6666
tick_time : 4000
tstamp_mode : NONE
period_step : 1
sleep_min : 0
avail_min : 4
xfer_align : 4
start_threshold : 2147483647
stop_threshold : 2048
silence_threshold: 0
silence_size : 0
boundary : 1073741824
Hooks PCM
Its setup is:
stream : CAPTURE
access : RW_INTERLEAVED
format : S16_LE
subformat : STD
channels : 1
rate : 9600
exact rate : 9600 (9600/1)
msbits : 16
buffer_size : 2048
period_size : 64
period_time : 6666
tick_time : 4000
tstamp_mode : NONE
period_step : 1
sleep_min : 0
avail_min : 4
xfer_align : 4
start_threshold : 2147483647
stop_threshold : 2048
silence_threshold: 0
silence_size : 0
boundary : 1073741824
Slave: Hardware PCM card 0 'HDA Intel' device 6
subdevice 0
Its setup is:
stream : CAPTURE
access : RW_INTERLEAVED
format : S16_LE
subformat : STD
channels : 1
rate : 9600
exact rate : 9600 (9600/1)
msbits : 16
buffer_size : 2048
period_size : 64
period_time : 6666
tick_time : 4000
tstamp_mode : NONE
period_step : 1
sleep_min : 0
avail_min : 4
xfer_align : 4
start_threshold : 2147483647
stop_threshold : 2048
silence_threshold: 0
silence_size : 0
boundary : 1073741824
<685.175108> main: startup write: 384...
<685.205145> main: alsa xrun: try to recover...
<685.226934> main: alsa xrun: recovered.
<685.226943> main: dev read = 0
<685.226951> main: alsa xrun: try to recover...
<685.250945> main: alsa xrun: recovered.
<685.250964> main: dev read = 0
<685.280918> main: alsa xrun: try to recover...
<685.302943> main: alsa xrun: recovered.
<685.302962> main: dev read = 0
...
[LOOP FOREVER]
...
<686.376013> main: signal 2: mark termination.
<686.376078> modem:0: modem_delete...
<686.376085> modem:0: shutdown modem...
<686.376089> modem:0: modem_stop..
<686.376093> main: alsa_stop...
<686.398870> modem:0: modem set hook: 1 --> 0...
<686.398889> main: alsa_ioctl: cmd 2, arg 0...
<686.406905> main: alsa_ioctl: cmd 8, arg 0...
<686.406928> modem:0: modem set state: 2 --> 1...
<686.406934> modem:0: new state: MODEM_IDLE
<686.406947> modem:0: modem report result: 3 (NO
CARRIER)
root@davide-laptop:/home/davide/Desktop/scanModem/SLMODEMD.gcc4.1#
root@davide-laptop:/home/davide# cat
/etc/wvdial.conf
[Dialer Defaults]
Modem = /dev/ttySL0
Baud = 56000
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
Init3 = ATX3
Init4 = ATL2
SetVolume = 1
Dial Command = ATX3DT
Carrier Check = no
;Stupid Mode = yes
ISDN = 0
Modem Type = Analog Modem
Phone = 7020187187
Username = telecom
Password = telecom
root@davide-laptop:/home/davide# wvdial
WvDial<*1>: WvDial: Internet dialer version 1.56
WvModem<*1>: Cannot get information for serial port.
WvDial<*1>: Initializing modem.
WvDial<*1>: Sending: ATZ
WvDial Modem<*1>: ATZ
WvDial Modem<*1>: OK
WvDial<*1>: Sending: ATQ0 V1 E1 S0=0 &C1 &D2
+FCLASS=0
WvDial Modem<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
WvDial Modem<*1>: OK
WvDial<*1>: Sending: ATX3
WvDial Modem<*1>: ATX3
WvDial Modem<*1>: OK
WvDial<*1>: Sending: ATL2
WvDial Modem<*1>: ATL2
WvDial Modem<*1>: OK
WvDial<*1>: Modem initialized.
WvDial<*1>: Sending: ATX3DT7020187187
WvDial<*1>: Waiting for carrier.
WvDial Modem<*1>: ATX3DT7020187187
WvDial Modem<*1>: NO CARRIER
WvDial<Warn>: No Carrier! Trying again.
On 1/13/08, Antonio Olivares
<olivares14031@xxxxxxxxx> wrote:
Marv,
testing with ./scanModem reports
Primary PCI_id 8086:284b
Subsystem PCI_id 103c:30d8
Softmodem codec or chipset from diagnostics:
from Archives:
Lacking a dsp (digital signal processing) chip,
the modem is a software
intensive or "softmodem" type. Its primary
controller manages the traffic
with the CPU. But the software needed is
specified in the Subsystem.
-----------------------------------------
Support type needed or chipset:
Support can likely be achieved through two
mutually exclusive alternatives:
1) The hsfmodem software for Conexant chipset
modems: Read Conexant.txt
The following ALSA alternative CANNOT work with
Conexant modems.
2) An ALSA modem driver plus slmodemd. Read
Smartlink.txt for details, and
to test get the package SLMODEMD.gcc4.1.tar.gz
from:
http://linmodems.technion.ac.il/packages/smartlink/
Writing Intel.txt
For owners of a Dell PCs with Conexant HSF modems,
a driver source
package with full speed enabled is available, but
requires driver
compiling. Read Conexant.txt
Read Conexant.txt
Writing Conexant.txt
Writing Smartlink.txt
============ end Smartlink section
=====================
Should Davide get SLMODEMD.gcc4.1.tar.gz?
then also take care of his bootup/irq troubles
Modem interrupt assignment and sharing:
16: 656 IO-APIC-fasteoi
uhci_hcd:usb3, HDA Intel,
i915@pci:0000:00:02.0
--- Bootup diagnostics for card in PCI slot
00:1b.0 ----
[ 14.972000] ACPI: PCI Interrupt
0000:00:1b.0[A] -> GSI 16 (level,
low) -> IRQ 16
[ 14.972000] PCI: Setting latency timer of
device 0000:00:1b.0 to 64
Thanks,
Antonio
On Jan 12, 2008 11:49 AM, Davide Rognoni
<davide.rognoni@xxxxxxxxx> wrote:
Hello,
what's the procedure, please?
[ModemData.txt]
Only plain text email is forwarded by the
Discuss@xxxxxxxxxxxxx List
Server,
as HTML can contain viruses. Use as the email
Subject Line:
YourName, YourCountry kernel
2.6.22-14-generic
With this Subject Line cogent experts will be
alerted, and useful
case names left in the Archive.
YourCountry will enable Country specific
guidance. Your contry's
local Linux experts
can be found through:
http://www.linux.org/groups/index.html
Responses from Discuss@xxxxxxxxxxxxx are
sometimes blocked by an
Internet Provider mail filters.
So in a day, also check the Archived responses
at
http://www.linmodems.org
-------------------------- System information
----------------------------
CPU=i686,
Linux version 2.6.22-14-generic (buildd@palmer)
(gcc version 4.1.3
20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2))
#1 SMP Sun Oct 14
23:05:12 GMT 2007
scanModem update of: 2008_03_01
There are no blacklisted modem drivers in
/etc/modprobe* files
The Advanced Linux Sound Architecture (ALSA)
packages providing audio
support,
also includes drivers for some modems. The ALSA
diagnostics are written
during
bootup to /proc/asound/ folders.
The ALSA verion is 1.0.14
The modem cards detected by "aplay -l" are:
card 0: Intel [HDA Intel], device 6: Si3054
Modem [Si3054 Modem]
The /proc/asound/pcm file reports:
-----------------------
00-06: Si3054 Modem : Si3054 Modem : playback 1
: capture 1
00-00: AD198x Analog : AD198x Analog : playback
1 : capture 1
about /proc/asound/cards:
------------------------
0 [Intel ]: HDA-Intel - HDA Intel
HDA Intel at 0xe4624000
irq 16
USB modem not detected by lsusb
For candidate card in slot 00:1b.0, firmware
information and bootup
diagnostics are:
PCI slot PCI ID SubsystemID
Name
---------- --------- ---------
--------------
00:1b.0 8086:284b 103c:30d8
Audio device: Intel
Corporation 82801H
Modem interrupt assignment and sharing:
16: 656 IO-APIC-fasteoi
uhci_hcd:usb3, HDA Intel,
i915@pci:0000:00:02.0
--- Bootup diagnostics for card in PCI slot
00:1b.0 ----
[ 14.972000] ACPI: PCI Interrupt
0000:00:1b.0[A] -> GSI 16 (level,
low) -> IRQ 16
[ 14.972000] PCI: Setting latency timer of
device 0000:00:1b.0 to 64
=== Finished modem firmware and bootup
diagnostics section. ===
=== Next deducing cogent software ===
The base of the UDEV device file system is:
/dev/.udev
Versions adequately match for the compiler
installed: 4.1.3
and the compiler used in kernel
assembly: 4.1.3
Minimal compiling resources appear complete:
make utility - /usr/bin/make
Compiler version 4.1
linuc_headers base folder
/lib/modules/2.6.22-14-generic/build
However some compilations and executable
functions may need additional
files,
in the FileNames.h (so called kernel "h"eaders)
collection installed
in /usr/include/ .
For martian_modem, additional required packages
are libc6-dev (and
for Debian/Ubuntu, linux-libc-dev). The also
required headers of
package libc6 are commonly installed by default.
If a driver compilation fails, with message
including some lack of
some FileName.h (stdio.h for example), then
Some additional kernel-header files need
installation to /usr/include.
The minimal additional packages are libc6-dev
and any of its dependents, under Ubuntu
linux-libc-dev
If an alternate ethernet connection is
available,
$ apt-get update
$ apt-get -s install linux-kernel-devel
will install needed package
For Debian/Ubuntu related distributions, run the
following command to
display the needed package list:
Otherwise packages have to be found through
http://packages.ubuntu.com
Once downloaded and transferred into a Linux
partition,
they can be installed alltogether with:
$ sudo dpkg -i *.deb
Checking pppd properties:
-rwsr-xr-- 1 root dip 269256 2007-10-04
21:57 /usr/sbin/pppd
In case of an "error 17" "serial loopback"
problem, see:
http://phep2.technion.ac.il/linmodems/archive-sixth/msg02637.html
To enable dialout without Root permission do:
$ su - root (not for Ubuntu)
sudo chmod a+x /usr/sbin/pppd
or under Ubuntu related Linuxes
sudo chmod a+x /usr/sbin/pppd
Checking settings of: /etc/ppp/options
asyncmap 0
noauth
crtscts
lock
hide-password
modem
proxyarp
lcp-echo-interval 30
lcp-echo-failure 4
noipx
In case of a message like:
Warning: Could not modify
/etc/ppp/pap-secrets: Permission denied
see
http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html
Read Modem/YourSystem.txt concerning other COMM
channels: eth0
Which can interfere with Browser naviagation.
Don't worry about the following, it is for the
experts
should trouble shooting be necessary.
==========================================================
Checking for modem support lines:
--------------------------------------
/device/modem symbolic link:
slmodemd created symbolic link /dev/ttySL0:
Within /etc/udev/ files:
Within /etc/modprobe.conf files:
/etc/modprobe.d/alsa-base:options
snd-atiixp-modem index=-2
/etc/modprobe.d/alsa-base:options
snd-via82xx-modem index=-2
/etc/modprobe.d/blacklist-modem:# Uncomment
these entries in order to
blacklist unwanted modem drivers
/etc/modprobe.d/blacklist-modem:# blacklist
snd-atiixp-modem
/etc/modprobe.d/blacklist-modem:# blacklist
snd-via82xx-modem
Within any ancient /etc/devfs files:
Within ancient kernel 2.4.n
/etc/module.conf files:
--------- end modem support lines --------
____________________________________________________________________________________
Never miss a thing. Make Yahoo your home page.
http://www.yahoo.com/r/hs
