Davide,
You might be on the right track with using
SLMODEMD.4.1.tar.gz
I have checked on Linuxant page and it gives the
following:
INTEL AC-Link Controller (ICH)
# PCI ID 8086:7186
# PCI ID 8086:7196
# PCI ID 8086:2416
# PCI ID 8086:2446
# PCI ID 8086:2486
# PCI ID 8086:24C6
# PCI ID 8086:24D6
# PCI ID 8086:266D
# PCI ID 8086:2426
# PCI ID 10DE:00D9 (NVIDIA nForce3)
# PCI ID 10DE:01C1 (NVIDIA)
VIA AC-Link Controller
# PCI ID 1106:3068
ALI AC-Link Controller
# PCI ID {1025,10B9}:5453
# PCI ID {1025,10B9}:5457
The internal modem of HP omnibook xe4500 series
machines should work with this driver.
ATI AC-Link Controller
# PCI ID 1002:434D
# PCI ID 1002:4378
SIS AC-Link Controller
# PCI ID 1039:7013
As far as wvdial try changing wvdial.conf from what
you have in the init strings to what is specified in
wvdial.txt like
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
# Lack of dialtone acquisition can be due to low line
voltage,
# a common problem in Italy.
# Try inserting a "dial without waiting": X3
# Init2 = ATQ0 V1 E1 S0=0 X3 &C1 &D2 +FCLASS=0
# In case of connection instabilities, specify a
lower frequency:
# Init2 = ATQ0 V1 E1 S0=0 X3 &C1 &D2 +MS=34
# a MS=90 option is sometimes necessary for Internet
Providers with buggy V92 protocols:
# Init2 = ATQ0 V1 E1 S0=0 X3 &C1 &D2 +MS=90
Meaning instead of having the top line try the
following:
# Init2 = ATQ0 V1 E1 S0=0 X3 &C1 &D2 +MS=34
Report back if you are successful/unsuccesful.
Regards,
Antonio
On Jan 18, 2008 4:24 PM, Davide Rognoni
<davide.rognoni@xxxxxxxxx> wrote:
> OK, I have a NO CARRIER error (X3 is the solution on
windows):
>
>
root@davide-laptop:/home/davide/Desktop/scanModem/SLMODEMD.gcc4.1#
> ./slmodemd --debug --alsa -c ITALY modem:0
> SmartLink Soft Modem: version 2.9.11 Aug 6 2007
22:02:27
> <680.660468> SmartLink Soft Modem: version 2.9.11
Aug 6 2007 22:02:27
> <680.660518> modem:0: startup modem...
> <680.660604> modem:0: update termios...
> symbolic link `/dev/ttySL0' -> `/dev/pts/1' created.
> modem `modem:0' created. TTY is `/dev/pts/1'
> <680.661147> open file:
/var/lib/slmodem/data.modem:0...
> <680.661541> main: rt applyed: SCHED_FIFO, pri 99
> Use `/dev/ttySL0' as modem device, Ctrl+C for
termination.
> <684.523022> main: termios changed.
> <684.523039> modem:0: update termios...
> <684.603114> main: termios changed.
> <684.603128> modem:0: update termios...
> <684.702980> modem:0: run cmd: ATZ
> <684.702996> modem:0: modem reset...
> <684.703001> modem:0: modem set state: 1 --> 1...
> <684.703008> modem:0: modem set mode: -> 0...
> <684.703013> modem:0: modem report result: 0 (OK)
> <684.803022> modem:0: run cmd:
ATQ0V1E1S0=0&C1&D2+FCLASS=0
> <684.803047> modem:0: modem set mode: -> 0...
> <684.803052> modem:0: modem report result: 0 (OK)
> <684.902980> modem:0: run cmd: ATX3
> <684.902994> modem:0: modem report result: 0 (OK)
> <685.002978> modem:0: run cmd: ATL2
> <685.002996> main: alsa_ioctl: cmd 8, arg 0...
> <685.003002> modem:0: modem report result: 0 (OK)
> <685.103436> modem:0: run cmd: ATX3DT7020187187
> <685.103458> modem:0: modem dial: T7020187187...
> <685.103463> modem:0: modem_dial_start...
> <685.103486> modem:0: modem_start..
> <685.103491> modem:0: modem set state: 1 --> 2...
> <685.103497> modem:0: new state: DP_ESTAB
> <685.103501> main: alsa_ioctl: cmd 8, arg 2...
> <685.103506> modem:0: modem set hook: 0 --> 1...
> <685.103511> main: alsa_ioctl: cmd 2, arg 1...
> <685.110905> main: alsa_ioctl: cmd 11, arg 0...
> <685.111025> main: alsa_ioctl: cmd 4, arg 2580...
> <685.111031> main: alsa_ioctl: cmd 7, arg 30...
> <685.111036> main: alsa_start...
> Hooks PCM
> Its setup is:
> stream : PLAYBACK
> access : RW_INTERLEAVED
> format : S16_LE
> subformat : STD
> channels : 1
> rate : 9600
> exact rate : 9600 (9600/1)
> msbits : 16
> buffer_size : 2048
> period_size : 64
> period_time : 6666
> tick_time : 4000
> tstamp_mode : NONE
> period_step : 1
> sleep_min : 0
> avail_min : 4
> xfer_align : 4
> start_threshold : 2147483647
> stop_threshold : 2048
> silence_threshold: 0
> silence_size : 0
> boundary : 1073741824
> Slave: Hardware PCM card 0 'HDA Intel' device 6
subdevice 0
> Its setup is:
> stream : PLAYBACK
> access : RW_INTERLEAVED
> format : S16_LE
> subformat : STD
> channels : 1
> rate : 9600
> exact rate : 9600 (9600/1)
> msbits : 16
> buffer_size : 2048
> period_size : 64
> period_time : 6666
> tick_time : 4000
> tstamp_mode : NONE
> period_step : 1
> sleep_min : 0
> avail_min : 4
> xfer_align : 4
> start_threshold : 2147483647
> stop_threshold : 2048
> silence_threshold: 0
> silence_size : 0
> boundary : 1073741824
> Hooks PCM
> Its setup is:
> stream : CAPTURE
> access : RW_INTERLEAVED
> format : S16_LE
> subformat : STD
> channels : 1
> rate : 9600
> exact rate : 9600 (9600/1)
> msbits : 16
> buffer_size : 2048
> period_size : 64
> period_time : 6666
> tick_time : 4000
> tstamp_mode : NONE
> period_step : 1
> sleep_min : 0
> avail_min : 4
> xfer_align : 4
> start_threshold : 2147483647
> stop_threshold : 2048
> silence_threshold: 0
> silence_size : 0
> boundary : 1073741824
> Slave: Hardware PCM card 0 'HDA Intel' device 6
subdevice 0
> Its setup is:
> stream : CAPTURE
> access : RW_INTERLEAVED
> format : S16_LE
> subformat : STD
> channels : 1
> rate : 9600
> exact rate : 9600 (9600/1)
> msbits : 16
> buffer_size : 2048
> period_size : 64
> period_time : 6666
> tick_time : 4000
> tstamp_mode : NONE
> period_step : 1
> sleep_min : 0
> avail_min : 4
> xfer_align : 4
> start_threshold : 2147483647
> stop_threshold : 2048
> silence_threshold: 0
> silence_size : 0
> boundary : 1073741824
> <685.175108> main: startup write: 384...
> <685.205145> main: alsa xrun: try to recover...
> <685.226934> main: alsa xrun: recovered.
> <685.226943> main: dev read = 0
> <685.226951> main: alsa xrun: try to recover...
> <685.250945> main: alsa xrun: recovered.
> <685.250964> main: dev read = 0
> <685.280918> main: alsa xrun: try to recover...
> <685.302943> main: alsa xrun: recovered.
> <685.302962> main: dev read = 0
> ...
> [LOOP FOREVER]
> ...
> <686.376013> main: signal 2: mark termination.
> <686.376078> modem:0: modem_delete...
> <686.376085> modem:0: shutdown modem...
> <686.376089> modem:0: modem_stop..
> <686.376093> main: alsa_stop...
> <686.398870> modem:0: modem set hook: 1 --> 0...
> <686.398889> main: alsa_ioctl: cmd 2, arg 0...
> <686.406905> main: alsa_ioctl: cmd 8, arg 0...
> <686.406928> modem:0: modem set state: 2 --> 1...
> <686.406934> modem:0: new state: MODEM_IDLE
> <686.406947> modem:0: modem report result: 3 (NO
CARRIER)
>
root@davide-laptop:/home/davide/Desktop/scanModem/SLMODEMD.gcc4.1#
>
>
> root@davide-laptop:/home/davide# cat
/etc/wvdial.conf
> [Dialer Defaults]
> Modem = /dev/ttySL0
> Baud = 56000
> Init1 = ATZ
> Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
> Init3 = ATX3
> Init4 = ATL2
> SetVolume = 1
> Dial Command = ATX3DT
> Carrier Check = no
> ;Stupid Mode = yes
> ISDN = 0
> Modem Type = Analog Modem
> Phone = 7020187187
> Username = telecom
> Password = telecom
>
>
> root@davide-laptop:/home/davide# wvdial
> WvDial<*1>: WvDial: Internet dialer version 1.56
> WvModem<*1>: Cannot get information for serial port.
> WvDial<*1>: Initializing modem.
> WvDial<*1>: Sending: ATZ
> WvDial Modem<*1>: ATZ
> WvDial Modem<*1>: OK
> WvDial<*1>: Sending: ATQ0 V1 E1 S0=0 &C1 &D2
+FCLASS=0
> WvDial Modem<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
> WvDial Modem<*1>: OK
> WvDial<*1>: Sending: ATX3
> WvDial Modem<*1>: ATX3
> WvDial Modem<*1>: OK
> WvDial<*1>: Sending: ATL2
> WvDial Modem<*1>: ATL2
> WvDial Modem<*1>: OK
> WvDial<*1>: Modem initialized.
> WvDial<*1>: Sending: ATX3DT7020187187
> WvDial<*1>: Waiting for carrier.
> WvDial Modem<*1>: ATX3DT7020187187
> WvDial Modem<*1>: NO CARRIER
> WvDial<Warn>: No Carrier! Trying again.
>
>
>
> On 1/13/08, Antonio Olivares
<olivares14031@xxxxxxxxx> wrote:
> > Marv,
> >
> > testing with ./scanModem reports
> >
> > Primary PCI_id 8086:284b
> > Subsystem PCI_id 103c:30d8
> > Softmodem codec or chipset from diagnostics:
> > from Archives:
> >
> >
> > Lacking a dsp (digital signal processing) chip,
the modem is a software
> > intensive or "softmodem" type. Its primary
controller manages the traffic
> > with the CPU. But the software needed is
specified in the Subsystem.
> > -----------------------------------------
> > Support type needed or chipset:
> >
> > Support can likely be achieved through two
mutually exclusive alternatives:
> > 1) The hsfmodem software for Conexant chipset
modems: Read Conexant.txt
> > The following ALSA alternative CANNOT work with
Conexant modems.
> >
> > 2) An ALSA modem driver plus slmodemd. Read
Smartlink.txt for details, and
> > to test get the package SLMODEMD.gcc4.1.tar.gz
from:
> >
http://linmodems.technion.ac.il/packages/smartlink/
> >
> >
> > Writing Intel.txt
> >
> > For owners of a Dell PCs with Conexant HSF modems,
a driver source
> > package with full speed enabled is available, but
requires driver
> > compiling. Read Conexant.txt
> >
> > Read Conexant.txt
> >
> > Writing Conexant.txt
> >
> > Writing Smartlink.txt
> > ============ end Smartlink section
=====================
> >
> > Should Davide get SLMODEMD.gcc4.1.tar.gz?
> >
> > then also take care of his bootup/irq troubles
> > > Modem interrupt assignment and sharing:
> > > 16: 656 IO-APIC-fasteoi
uhci_hcd:usb3, HDA Intel,
> > > i915@pci:0000:00:02.0
> > > --- Bootup diagnostics for card in PCI slot
00:1b.0 ----
> > > [ 14.972000] ACPI: PCI Interrupt
0000:00:1b.0[A] -> GSI 16 (level,
> > > low) -> IRQ 16
> > > [ 14.972000] PCI: Setting latency timer of
device 0000:00:1b.0 to 64
> >
> >
> > Thanks,
> >
> > Antonio
> >
> > On Jan 12, 2008 11:49 AM, Davide Rognoni
<davide.rognoni@xxxxxxxxx> wrote:
> > > Hello,
> > > what's the procedure, please?
> > >
> > > [ModemData.txt]
> > > Only plain text email is forwarded by the
Discuss@xxxxxxxxxxxxx List
> > Server,
> > > as HTML can contain viruses. Use as the email
Subject Line:
> > > YourName, YourCountry kernel
2.6.22-14-generic
> > > With this Subject Line cogent experts will be
alerted, and useful
> > > case names left in the Archive.
> > > YourCountry will enable Country specific
guidance. Your contry's
> > > local Linux experts
> > > can be found through:
http://www.linux.org/groups/index.html
> > > Responses from Discuss@xxxxxxxxxxxxx are
sometimes blocked by an
> > > Internet Provider mail filters.
> > > So in a day, also check the Archived responses
at
> > http://www.linmodems.org
> > > -------------------------- System information
> > ----------------------------
> > > CPU=i686,
> > > Linux version 2.6.22-14-generic (buildd@palmer)
(gcc version 4.1.3
> > > 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2))
#1 SMP Sun Oct 14
> > > 23:05:12 GMT 2007
> > > scanModem update of: 2008_03_01
> > >
> > >
> > > There are no blacklisted modem drivers in
/etc/modprobe* files
> > >
> > > The Advanced Linux Sound Architecture (ALSA)
packages providing audio
> > support,
> > > also includes drivers for some modems. The ALSA
diagnostics are written
> > during
> > > bootup to /proc/asound/ folders.
> > >
> > >
> > > The ALSA verion is 1.0.14
> > > The modem cards detected by "aplay -l" are:
> > > card 0: Intel [HDA Intel], device 6: Si3054
Modem [Si3054 Modem]
> > >
> > >
> > > The /proc/asound/pcm file reports:
> > > -----------------------
> > > 00-06: Si3054 Modem : Si3054 Modem : playback 1
: capture 1
> > > 00-00: AD198x Analog : AD198x Analog : playback
1 : capture 1
> > >
> > > about /proc/asound/cards:
> > > ------------------------
> > > 0 [Intel ]: HDA-Intel - HDA Intel
> > > HDA Intel at 0xe4624000
irq 16
> > >
> > > USB modem not detected by lsusb
> > >
> > > For candidate card in slot 00:1b.0, firmware
information and bootup
> > > diagnostics are:
> > > PCI slot PCI ID SubsystemID
Name
> > > ---------- --------- ---------
--------------
> > > 00:1b.0 8086:284b 103c:30d8
Audio device: Intel
> > Corporation 82801H
> > >
> > > Modem interrupt assignment and sharing:
> > > 16: 656 IO-APIC-fasteoi
uhci_hcd:usb3, HDA Intel,
> > > i915@pci:0000:00:02.0
> > > --- Bootup diagnostics for card in PCI slot
00:1b.0 ----
> > > [ 14.972000] ACPI: PCI Interrupt
0000:00:1b.0[A] -> GSI 16 (level,
> > > low) -> IRQ 16
> > > [ 14.972000] PCI: Setting latency timer of
device 0000:00:1b.0 to 64
> > >
> > >
> > > === Finished modem firmware and bootup
diagnostics section. ===
> > > === Next deducing cogent software ===
> > >
> > >
> > >
> > >
> > > The base of the UDEV device file system is:
/dev/.udev
> > >
> > > Versions adequately match for the compiler
installed: 4.1.3
> > > and the compiler used in kernel
assembly: 4.1.3
> > >
> > >
> > >
> > > Minimal compiling resources appear complete:
> > > make utility - /usr/bin/make
> > > Compiler version 4.1
> > > linuc_headers base folder
/lib/modules/2.6.22-14-generic/build
> > >
> > > However some compilations and executable
functions may need additional
> > files,
> > > in the FileNames.h (so called kernel "h"eaders)
collection installed
> > > in /usr/include/ .
> > > For martian_modem, additional required packages
are libc6-dev (and
> > > for Debian/Ubuntu, linux-libc-dev). The also
required headers of
> > > package libc6 are commonly installed by default.
> > >
> > >
> > >
> > > If a driver compilation fails, with message
including some lack of
> > > some FileName.h (stdio.h for example), then
> > > Some additional kernel-header files need
installation to /usr/include.
> > > The minimal additional packages are libc6-dev
> > > and any of its dependents, under Ubuntu
linux-libc-dev
> > >
> > > If an alternate ethernet connection is
available,
> > > $ apt-get update
> > > $ apt-get -s install linux-kernel-devel
> > > will install needed package
> > > For Debian/Ubuntu related distributions, run the
following command to
> > > display the needed package list:
> > >
> > > Otherwise packages have to be found through
http://packages.ubuntu.com
> > > Once downloaded and transferred into a Linux
partition,
> > > they can be installed alltogether with:
> > > $ sudo dpkg -i *.deb
> > >
> > >
> > > Checking pppd properties:
> > > -rwsr-xr-- 1 root dip 269256 2007-10-04
21:57 /usr/sbin/pppd
> > >
> > > In case of an "error 17" "serial loopback"
problem, see:
> > >
http://phep2.technion.ac.il/linmodems/archive-sixth/msg02637.html
> > >
> > > To enable dialout without Root permission do:
> > > $ su - root (not for Ubuntu)
> > > sudo chmod a+x /usr/sbin/pppd
> > > or under Ubuntu related Linuxes
> > > sudo chmod a+x /usr/sbin/pppd
> > >
> > > Checking settings of: /etc/ppp/options
> > > asyncmap 0
> > > noauth
> > > crtscts
> > > lock
> > > hide-password
> > > modem
> > > proxyarp
> > > lcp-echo-interval 30
> > > lcp-echo-failure 4
> > > noipx
> > >
> > > In case of a message like:
> > > Warning: Could not modify
/etc/ppp/pap-secrets: Permission denied
> > > see
http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html
> > >
> > > Read Modem/YourSystem.txt concerning other COMM
channels: eth0
> > > Which can interfere with Browser naviagation.
> > >
> > > Don't worry about the following, it is for the
experts
> > > should trouble shooting be necessary.
> > >
==========================================================
> > >
> > > Checking for modem support lines:
> > > --------------------------------------
> > > /device/modem symbolic link:
> > > slmodemd created symbolic link /dev/ttySL0:
> > > Within /etc/udev/ files:
> > >
> > > Within /etc/modprobe.conf files:
> > > /etc/modprobe.d/alsa-base:options
snd-atiixp-modem index=-2
> > > /etc/modprobe.d/alsa-base:options
snd-via82xx-modem index=-2
> > > /etc/modprobe.d/blacklist-modem:# Uncomment
these entries in order to
> > > blacklist unwanted modem drivers
> > > /etc/modprobe.d/blacklist-modem:# blacklist
snd-atiixp-modem
> > > /etc/modprobe.d/blacklist-modem:# blacklist
snd-via82xx-modem
> > > Within any ancient /etc/devfs files:
> > >
> > > Within ancient kernel 2.4.n
/etc/module.conf files:
> > >
> > > --------- end modem support lines --------
> > >
> >
>
____________________________________________________________________________________
Never miss a thing. Make Yahoo your home page.
http://www.yahoo.com/r/hs
