Dan Any entries in the wvdial.conf [Dialer Default] section, such as Username daniel@xxxxxxx Password blah blah will be replaced by corresponding lines in alternate [Dialer next] sections when you $ sudo wvdial next But do include Carrier Check = no in the [Dialer Default] section, to support the ALI5451 modem or any modem using /dev/pts/N ports MarvS On Jan 9, 2008 5:57 PM, funlinux <hotnsizzle1@xxxxxxxxx> wrote: > > Since your modem is recognized and connecting to your linux system, the only > thing that is missing is: > > Username: daniel@xxxxxxx > password: blah blah > > If your isp is peoplepc then: > > Username: daniel@xxxxxxxxxxxx > > If this doesn't work , try the steps written out in this link: > > http://ubuntuforums.org/showthread.php?t=530176 > > > > > > Daniel Victoria wrote: > > > > Hi, > > > > I got my ALI 5451 model working using the slmodemd command and I know > > it works because I can call my own cell phone but, for some reason, > > when trying to connect to my ISP a "timeout while dialing" error > > appears and the wvdial goes into a loop. > > > > I'm attaching my wvdial.conf and the screen dump of the wvdial run. > > I'm calling the Itel_pira profile and I tryed to have my modem produce > > sounds by also using the shh profile but I hear nothing. > > > > Thanks > > > > Daniel > > > > [Dialer Defaults] > > Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 > > Modem Type = Analog Modem > > ; Phone = <Target Phone Number> > > ISDN = 0 > > ; Username = <Your Login Name> > > Init1 = ATZ > > ; Password = <Your Password> > > Modem = /dev/ttySL0 > > Baud = 460800 > > > > [Dialer Itel_pira] > > Carrier check = no > > Phone = blablabla > > Username = blablabla > > Password = blablabla > > ;Stupid mode = yes > > > > [Dialer shh] > > SetVolume = 4 > > Init3 = ATM1L3 > > Dial Prefix=0 > > > > [Dialer teste] > > Phone = <my cell phone - it works> > > Username = daniel > > password = oioi > > > > Script started on Wed Jan 9 18:28:51 2008 > > ]0;daniel@xadrez: ~/p2120 daniel@xadrez:~/p2120$ wvdias > > sudo wvdi al shh Itel_pira > > [sudo] password for daniel: > > WvDial<*1>: WvDial: Internet dialer version 1.56 > > WvModem<*1>: Cannot get information for serial port. > > WvDial<*1>: Initializing modem. > > WvDial<*1>: Sending: ATZ > > WvDial Modem<*1>: ATZ > > WvDial Modem<*1>: OK > > WvDial<*1>: Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 > > WvDial Modem<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 > > WvDial Modem<*1>: OK > > WvDial<*1>: Sending: ATM1L3 > > WvDial Modem<*1>: ATM1L3 > > WvDial Modem<*1>: OK > > WvDial<*1>: Modem initialized. > > WvDial<*1>: Sending: ATDT0,34479515 > > WvDial<*1>: Waiting for carrier. > > WvDial Modem<*1>: ATDT0,34479515 > > WvDial<Warn>: Timed out while dialing. Trying again. > > WvDial<*1>: Sending: ATDT0,34479515 > > WvDial<*1>: Waiting for carrier. > > WvDial Modem<*1>: NO CARRIER > > WvDial Modem<*1>: ATDT0,34479515 > > WvDial<Warn>: No Carrier! Trying again. > > WvDial<*1>: Sending: ATDT0,34479515 > > WvDial<*1>: Waiting for carrier. > > WvDial Modem<*1>: NO CARRIER > > WvDial Modem<*1>: ATDT0,34479515 > > WvDial<Warn>: No Carrier! Trying again. > > WvDial<*1>: Sending: ATDT0,34479515 > > WvDial<*1>: Waiting for carrier. > > WvDial Modem<*1>: NO CARRIER > > WvDial Modem<*1>: ATDT0,34479515 > > WvDial<Warn>: No Carrier! Trying again. > > WvDial<*1>: Sending: ATDT0,34479515 > > WvDial<*1>: Waiting for carrier. > > WvDial Modem<*1>: NO CARRIER > > WvDial Modem<*1>: ATDT0,34479515 > > WvDial<Warn>: No Carrier! Trying again. > > WvDial<*1>: Sending: ATDT0,34479515 > > WvDial<*1>: Waiting for carrier. > > WvDial Modem<*1>: NO CARRIER > > WvDial Modem<*1>: ATDT0,34479515 > > WvDial<Warn>: No Carrier! Trying again. > > WvDial<*1>: Sending: ATDT0,34479515 > > WvDial<*1>: Waiting for carrier. > > WvDial Modem<*1>: NO CARRIER > > WvDial Modem<*1>: ATDT0,34479515 > > WvDial<Warn>: No Carrier! Trying again. > > WvDial<*1>: Sending: ATDT0,34479515 > > WvDial<*1>: Waiting for carrier. > > WvDial Modem<*1>: NO CARRIER > > WvDial Modem<*1>: ATDT0,34479515 > > WvDial<Warn>: No Carrier! Trying again. > > WvDial<*1>: Sending: ATDT0,34479515 > > WvDial<*1>: Waiting for carrier. > > WvDial Modem<*1>: NO CARRIER > > WvDial Modem<*1>: ATDT0,34479515 > > WvDial<Warn>: No Carrier! Trying again. > > WvDial<*1>: Sending: ATDT0,34479515 > > WvDial<*1>: Waiting for carrier. > > WvDial Modem<*1>: NO CARRIER > > WvDial Modem<*1>: ATDT0,34479515 > > WvDial<Warn>: No Carrier! Trying again. > > WvDial<*1>: Sending: ATDT0,34479515 > > WvDial<*1>: Waiting for carrier. > > WvDial Modem<*1>: NO CARRIER > > WvDial Modem<*1>: ATDT0,34479515 > > WvDial<Warn>: No Carrier! Trying again. > > WvDial<*1>: Sending: ATDT0,34479515 > > WvDial<*1>: Waiting for carrier. > > WvDial Modem<*1>: NO CARRIER > > WvDial Modem<*1>: ATDT0,34479515 > > WvDial<Warn>: No Carrier! Trying again. > > WvDial<*1>: Sending: ATDT0,34479515 > > WvDial<*1>: Waiting for carrier. > > WvDial Modem<*1>: NO CARRIER > > WvDial Modem<*1>: ATDT0,34479515 > > WvDial<Warn>: No Carrier! Trying again. > > WvDial<*1>: Sending: ATDT0,34479515 > > WvDial<*1>: Waiting for carrier. > > WvDial Modem<*1>: NO CARRIER > > WvDial Modem<*1>: ATDT0,34479515 > > WvDial<Warn>: No Carrier! Trying again. > > WvDial<*1>: Sending: ATDT0,34479515 > > WvDial<*1>: Waiting for carrier. > > WvDial Modem<*1>: NO CARRIER > > WvDial Modem<*1>: ATDT0,34479515 > > WvDial<Warn>: No Carrier! Trying again. > > WvDial<*1>: Sending: ATDT0,34479515 > > WvDial<*1>: Waiting for carrier. > > Caught signal 2: Attempting to exit gracefully... > > WvDial Modem<*1>: NO CARRIER > > WvDial Modem<*1>: ATDT0,34479515 > > WvDial<Warn>: No Carrier! Trying again. > > WvDial<*1>: Disconnecting at Wed Jan 9 18:30:15 2008 > > ]0;daniel@xadrez: ~/p2120 daniel@xadrez:~/p2120$ exit > > exit > > > > Script done on Wed Jan 9 18:30:18 2008 > > > > > > -- > View this message in context: http://www.nabble.com/ALI-5451-Model-works-but-can%27t-connect-tp14722267p14723651.html > Sent from the Linux Winmodem Support - Discussion mailing list archive at Nabble.com. > >
