Have you executed wvdialconf again or are you using the old file made
under 2.6.16?
Pablo Huerta Jr wrote:
Hello,
I need some help getting my modem working again. I had it previously
working on Linux From Scratch with a 2.6.16 kernel about a year and a
half ago. Now I am using Gentoo with a 2.6.22-suspend2 kernel and am
getting a NO CARRIER error when trying to dial out with wvdial or
kppp. I am using the precompiled SLMODEMD.gcc4.1. I run slmodemd
--alsa hw:0,6 and get:
SmartLink Soft Modem: version 2.9.11 Aug 6 2007 22:02:27
symbolic link `/dev/ttySL0' -> `/dev/pts/1' created.
modem `hw:0,6' created. TTY is `/dev/pts/1'
Use `/dev/ttySL0' as modem device, Ctrl+C for termination.
I start wvdial and get:
--> WvDial: Internet dialer version 1.60
--> Initializing modem.
--> Sending: ATZ
ATZ
OK
--> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
OK
--> Modem initialized.
--> Sending: ATDT2260082
--> Waiting for carrier.
ATDT2260082
NO CARRIER
...(more info comes out but I'm not at home to actually copy and paste
the rest of it)
No errors come out on the terminal where I run slmodemd. Any idea
whats going on? Here's my wvdial.conf:
[Dialer Defaults]
Carrier Check = no
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
Modem Type = Analog Modem
Phone = XXX
ISDN = 0
Password = XXX
Username = XXX
Modem = /dev/ttySL0
Baud = 460800
Of course for phone #, username and password I am using real info. I
also tried with Stupid Mode = on but still get NO CARRIER. Here's my
ModemData.txt:
Only plain text email is forwarded by the Discuss@xxxxxxxxxxxxx List Server,
as HTML can contain viruses. Use as the email Subject Line:
YourName, YourCountry [1;37m kernel 2.6.22-suspend2-r2
With this Subject Line cogent experts will be alerted, and useful
case names left in the Archive.
YourCountry will enable Country specific guidance. Your contry's
local Linux experts
can be found through: http://www.linux.org/groups/index.html
Responses from Discuss@xxxxxxxxxxxxx are sometimes blocked by an
Internet Provider mail filters.
So in a day, also check the Archived responses at http://www.linmodems.org
-------------------------- System information ----------------------------
CPU=i686, [1;37m
Linux version 2.6.22-suspend2-r2 (root@blackboxCPP) (gcc version 4.1.2
(Gentoo 4.1.2 p1.0.2)) #11 SMP Sat Dec 15 19:16:39 CST 2007
scanModem update of: 2008_07_01
There are no blacklisted modem drivers in /etc/modprobe* files
PCI slot 00:1b.0 has a High Definition Audio Card
The Advanced Linux Sound Architecture (ALSA) packages providing audio support,
also includes drivers for some modems. The ALSA diagnostics are written during
bootup to /proc/asound/ folders.
The ALSA verion is 1.0.14
The modem cards detected by "aplay -l" are:
card 0: Intel [HDA Intel], device 6: Si3054 Modem [Si3054 Modem]
The /proc/asound/pcm file reports:
-----------------------
00-06: Si3054 Modem : Si3054 Modem : playback 1 : capture 1
00-02: ALC882 Analog : ALC882 Analog : capture 2
00-01: ALC882 Digital : ALC882 Digital : playback 1
00-00: ALC882 Analog : ALC882 Analog : playback 1 : capture 2
about /proc/asound/cards:
------------------------
0 [Intel ]: HDA-Intel - HDA Intel
HDA Intel at 0xffe38000 irq 17
The driver snd-hda-intel with its dependent drivers:
snd_hda_intel 245208 0
snd_pcm 62468 2 snd_pcm_oss,snd_hda_intel
snd 43172 8
snd_pcm_oss,snd_mixer_oss,snd_seq_oss,snd_seq,snd_seq_device,snd_hda_intel,snd_pcm,snd_timer
snd_page_alloc 7368 2 snd_hda_intel,snd_pcm
----------
provide audio + modem support for many soft modem chips
residing on the HDA card subsystem
However all such cards are not yet supported.
The modem codec file for the the HDA card is: /proc/asound/card0/codec#1
--------------------------------------------------------
Codec: Generic 11c1 Si3054
Address: 1
Vendor Id: 0x11c13055
Subsystem Id: 0x11c11601
Revision Id: 0x100700
USB modem not detected by lsusb
For candidate card in slot 00:1b.0, firmware information and bootup
diagnostics are:
PCI slot PCI ID SubsystemID Name
---------- --------- --------- --------------
00:1b.0 8086:27d8 1462:0571 Audio device: Intel Corporation 82801G
Modem interrupt assignment and sharing:
17: 1462 0 IO-APIC-fasteoi HDA Intel, realtek
--- Bootup diagnostics for card in PCI slot 00:1b.0 ----
ACPI: PCI Interrupt 0000:00:1b.0[B] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1b.0 to 64
=== Finished modem firmware and bootup diagnostics section. ===
=== Next deducing cogent software ===
The base of the UDEV device file system is: /dev/.udev
Versions adequately match for the compiler installed: 4.1.2
and the compiler used in kernel assembly: 4.1.2
Minimal compiling resources appear complete:
make utility - /usr/bin/make
Compiler version 4.1
linuc_headers base folder /lib/modules/2.6.22-suspend2-r2/build
However some compilations and executable functions may need additional files,
in the FileNames.h (so called kernel "h"eaders) collection installed
in /usr/include/ .
For martian_modem, additional required packages are libc6-dev (and
for Debian/Ubuntu, linux-libc-dev). The also required headers of
package libc6 are commonly installed by default.
If a driver compilation fails, with message including some lack of
some FileName.h (stdio.h for example), then
Some additional kernel-header files need installation to /usr/include.
The minimal additional packages are libc6-dev
and any of its dependents, under Ubuntu linux-libc-dev
If an alternate ethernet connection is available,
$ apt-get update
$ apt-get -s install linux-kernel-devel
will install needed package
For Debian/Ubuntu related distributions, run the following command to
display the needed package list:
Otherwise packages have to be found through http://packages.ubuntu.com
Once downloaded and transferred into a Linux partition,
they can be installed alltogether with:
$ sudo dpkg -i *.deb
Checking pppd properties:
-r-s--x--x 1 root root 264212 2007-11-13 21:54 /usr/sbin/pppd
In case of an "error 17" "serial loopback" problem, see:
http://phep2.technion.ac.il/linmodems/archive-sixth/msg02637.html
To enable dialout without Root permission do:
$ su - root (not for Ubuntu)
chmod a+x /usr/sbin/pppd
or under Ubuntu related Linuxes
chmod a+x /usr/sbin/pppd
Checking settings of: /etc/ppp/options
lock
In case of a message like:
Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html
Read Modem/YourSystem.txt concerning other COMM channels: bnep0 realtek tap0
Which can interfere with Browser naviagation.
Don't worry about the following, it is for the experts
should trouble shooting be necessary.
==========================================================
Checking for modem support lines:
--------------------------------------
/device/modem symbolic link:
slmodemd created symbolic link /dev/ttySL0:
Within /etc/udev/ files:
Within /etc/modprobe.conf files:
Within any ancient /etc/devfs files:
Within ancient kernel 2.4.n /etc/module.conf files:
--------- end modem support lines --------
Thanks,
Pablo
