Marvin Stodolsky ha scritto:
Pixall,
we really have little idea how scanModem behaves on MAC
architecture. My filters and parsing may not be appropriate.
scanModem is mostly useful for the PCI slot hardware of PCs
But send us the output of
$ lspci
0000:00:0b.0 Host bridge: Apple Computer Inc. UniNorth AGP
0000:00:10.0 VGA compatible controller: ATI Technologies Inc Rage 128
PF/PRO AGP 4x TMDS
0001:10:0b.0 Host bridge: Apple Computer Inc. UniNorth PCI
0001:10:17.0 Class ff00: Apple Computer Inc. KeyLargo Mac I/O (rev 03)
0001:10:18.0 USB Controller: Apple Computer Inc. KeyLargo USB
0001:10:19.0 USB Controller: Apple Computer Inc. KeyLargo USB
0001:10:1a.0 FireWire (IEEE 1394): Texas Instruments TSB12LV26 IEEE-1394
Controller (Link)
0002:20:0b.0 Host bridge: Apple Computer Inc. UniNorth Internal PCI
0002:20:0f.0 Ethernet controller: Apple Computer Inc. UniNorth GMAC (Sun
GEM) (rev 01)
$ lspci -nv
Flags: bus master, 66MHz, medium devsel, latency 16
Capabilities: [80] AGP version 1.0
0000:00:10.0 0300: 1002:5046 (prog-if 00 [VGA])
Flags: bus master, stepping, 66MHz, medium devsel, latency 255,
IRQ 48
Memory at 94000000 (32-bit, prefetchable) [size=64M]
I/O ports at 0400 [size=256]
Memory at 90000000 (32-bit, non-prefetchable) [size=16K]
Expansion ROM at f1000000 [disabled] [size=128K]
Capabilities: [50] AGP version 2.0
Capabilities: [5c] Power Management version 2
0001:10:0b.0 0600: 106b:001f
Flags: bus master, 66MHz, medium devsel, latency 16
0001:10:17.0 ff00: 106b:0022 (rev 03)
Flags: bus master, medium devsel, latency 16
Memory at 80000000 (32-bit, non-prefetchable) [size=512K]
0001:10:18.0 0c03: 106b:0019 (prog-if 10 [OHCI])
Flags: bus master, medium devsel, latency 16, IRQ 27
Memory at 80082000 (32-bit, non-prefetchable) [size=4K]
0001:10:19.0 0c03: 106b:0019 (prog-if 10 [OHCI])
Flags: bus master, medium devsel, latency 16, IRQ 28
Memory at 80081000 (32-bit, non-prefetchable) [size=4K]
0001:10:1a.0 0c00: 104c:8020 (prog-if 10 [OHCI])
Flags: bus master, medium devsel, latency 16, IRQ 63
Memory at 80080000 (32-bit, non-prefetchable) [size=2K]
Memory at 80084000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [44] Power Management version 1
0002:20:0b.0 0600: 106b:001e
Flags: bus master, 66MHz, medium devsel, latency 16
0002:20:0f.0 0200: 106b:0021 (rev 01)
Flags: bus master, 66MHz, slow devsel, latency 16, IRQ 41
Memory at f5200000 (32-bit, non-prefetchable) [size=2M]
Expansion ROM at f5000000 [disabled] [size=1M]
which is mostly what scanModem parses.
Also try:
$ sudo wvdialconf /etc/wvdial.conf
which would detect Controller Chipset modems on a PC
Editing `/etc/wvdial.conf'.
Scanning your serial ports for a modem.
WvModem<*1>: Cannot set information for serial port.
ttyS0<*1>: ATQ0 V1 E1 -- OK
ttyS0<*1>: ATQ0 V1 E1 Z -- OK
ttyS0<*1>: ATQ0 V1 E1 S0=0 -- OK
ttyS0<*1>: ATQ0 V1 E1 S0=0 &C1 -- OK
ttyS0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK
ttyS0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
ttyS0<*1>: Modem Identifier: ATI -- 56000
ttyS0<*1>: Speed 4800: AT -- OK
ttyS0<*1>: Speed 9600: AT -- OK
ttyS0<*1>: Speed 19200: AT -- OK
ttyS0<*1>: Speed 38400: AT -- OK
ttyS0<*1>: Speed 57600: AT -- OK
ttyS0<*1>: Speed 115200: AT -- OK
ttyS0<*1>: Speed 230400: AT -- OK
ttyS0<*1>: Max speed is 230400; that should be safe.
ttyS0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
WvModem<*1>: Cannot set information for serial port.
ttyS1<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttyS1<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud
ttyS1<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.
Found a modem on /dev/ttyS0.
Modem configuration written to /etc/wvdial.conf.
ttyS0<Info>: Speed 230400; init "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0"
What does the MAC info/diagnostic relate about the modem type?
In the past some Mac/apples used Conexant modems,
whose Linux software is at www.linuxant.com
MarvS
scanModem maintainer
On Dec 26, 2007 10:25 AM, pixall.myftp.biz <info@xxxxxxxxx> wrote:
Only plain text email is forwarded by the Discuss@xxxxxxxxxxxxx List Server,
as HTML can contain viruses. Use as the email Subject Line:
YourName, YourCountry Debian GNU/Linux lenny/sid kernel 2.6.23.9-personalizzato
With this Subject Line cogent experts will be alerted, and useful case names left in the Archive.
YourCountry will enable Country specific guidance. Your contry's local Linux experts
can be found through: http://www.linux.org/groups/index.html
Responses from Discuss@xxxxxxxxxxxxx are sometimes blocked by an Internet Provider mail filters.
So in a day, also check the Archived responses at http://www.linmodems.org
-------------------------- System information ----------------------------
CPU=ppc, Debian GNU/Linux lenny/sid
Linux version 2.6.23.9-personalizzato (root@xxxxxxxxxxxxxxxx) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 Thu Dec 13 02:45:02 CET 2007
scanModem update of: 2007-12-07
There are no blacklisted modem drivers in /etc/modprobe* files
The Advanced Linux Sound Architecture (ALSA) packages providing audio support on your System,
also includes drivers for some modems. High Definition Audio (HDA) cards can themselves host
a softmodem chipset, with both audio+modem supported by a snd-hda-intel driver.
The ALSA diagnostics are written during bootup to /proc/asound/ folders.
Modem not detected though HDA card diagnostics, though not excluding
a possible Conexant modem chip impervious to ALSA diagnostics.
Proceeding through alternative possibilties.
Summary card and chipset information is in:
/proc/asound/cards:
0 [Speakers ]: USB-Audio - Speakers
Apple Computer, Inc. Speakers at usb-0001:10:19.0-1, full speed
/proc/asound/pcm:
00-00: USB Audio : USB Audio : playback 1
A copy of /proc/asound had been copied to Modem/ALSAroot.tgz
USB modem not detected by lsusb
There is candidate modem software.
The base of the UDEV device file system is: /dev/.udev
Versions adequately match for the compiler installed: 4.1.3
and the compiler used in kernel assembly: 4.1.3
Minimal compiling resources appear complete:
make utility - /usr/bin/make
Compiler version 4.1
linuc_headers base folder /lib/modules/2.6.23.9-personalizzato/build
However some compilations and executable functions may need additional files,
in the FileNames.h (so called kernel "h"eaders) collection installed in /usr/include/ .
For martian_modem, additional required packages are libc6-dev (and for Debian/Ubuntu, linux-libc-dev). The also required headers of package libc6 are commonly installed by default.
Compressed files at: /usr/src/linux-2.6.23.12.tar.bz2 /usr/src/linux-2.6.23.9.tar.bz2 /usr/src/linux-source-2.6.22.tar.bz2 /usr/src/patch-2.6.22-cks1.bz2 /usr/src/patch-2.6.23.12.bz2
For Debian and some related distributions, a package kernel-kbuild-2.6-23 may be needed to support driver compiling
If a driver compilation fails, with message including some lack of some FileName.h (stdio.h for example), then
Some additional kernel-header files need installation to /usr/include. The minimal additional packages are libc6-dev
and any of its dependents, under Ubuntu linux-libc-dev
If an alternate ethernet connection is available,
$ apt-get update
$ apt-get -s install linux-kernel-devel
will install needed pacakage
For Debian/Ubuntu related distributions, run the following command to display the needed package list:
Otherwise packages have to be found through http://packages.ubuntu.com
Once downloaded and transferred into a Linux partition,
they can be installed alltogether with:
$ sudo dpkg -i *.deb
Checking pppd properties:
-rwsr-xr-- 1 root dip 318884 2007-10-04 23:25 /usr/sbin/pppd
In case of an "error 17" "serial loopback" problem, see:
http://phep2.technion.ac.il/linmodems/archive-sixth/msg02637.html
To enable dialout without Root permission do:
$ su - root (not for Ubuntu)
chmod a+x /usr/sbin/pppd
or under Ubuntu related Linuxes
chmod a+x /usr/sbin/pppd
Checking settings of: /etc/ppp/options
asyncmap 0
noauth
crtscts
lock
hide-password
modem
proxyarp
lcp-echo-interval 30
lcp-echo-failure 4
noipx
In case of a message like:
Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html
Read Modem/YourSystem.txt concerning other COMM channels: eth0
Which can interfere with Browser naviagation.
Don't worry about the following, it is for the experts
should trouble shooting be necessary.
==========================================================
Checking for modem support lines:
--------------------------------------
/device/modem symbolic link:
slmodemd created symbolic link /dev/ttySL0:
Within /etc/udev/ files:
Within /etc/modprobe.conf files:
/etc/modprobe.d/alsa-base:options snd-atiixp-modem index=-2
/etc/modprobe.d/alsa-base:options snd-via82xx-modem index=-2
/etc/modprobe.d/blacklist-modem:# Uncomment these entries in order to blacklist unwanted modem drivers
/etc/modprobe.d/blacklist-modem:# blacklist snd-atiixp-modem
/etc/modprobe.d/blacklist-modem:# blacklist snd-via82xx-modem
Within any ancient /etc/devfs files:
Within ancient kernel 2.4.n /etc/module.conf files:
--------- end modem support lines --------
