Alessandro WvDial<*1>: Carrier detected. Waiting for prompt.WvDial Modem<*1>: ** Ascend TNT Terminal Server **WvDial Modem<*1>: System Password:WvDial<*1>: Looks like a password prompt. This looks as if your LoginName was not sent, so the followingpassword would not be adequate. Make sure your LoginName is in thesetup scriptwe recommend working directly with wvdial, rather than front ends to wvdial.Below is a typical /etc/wvdial.conf MarvS [Dialer Defaults]Init1 = ATZInit2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0Modem Type = Analog ModemBaud = 460800New PPPD = yesModem = /dev/modemISDN = 0Phone = 8283180110Password = LoginPassWordUsername = LoginName@xxxxxxxxxxxxxxxx On Jan 1, 2008 4:44 PM, Alessandro <aricci@xxxxxxx> wrote:> Hello everybody and thank you for your help.>> I followed the given instruction. Now the modem is recognized for sure.> When I try dialling out everything is working, the number is dialled and> the carrier is there. Anyway looks like I can't complete the procedure> and in the end I can't get the connection. Here below the output of> WvDial from terminal and the log of GnomePPP, maybe you can help me and> suggest what to check.>> Thanks again for your help and happy new year.>> Alessandro>> (WVDIAL OUTPUT)> WvDial<*1>: WvDial: Internet dialer version 1.56> WvDial<*1>: Initializing modem.> WvDial<*1>: Sending: ATZ> WvDial Modem<*1>: ATZ> WvDial Modem<*1>: OK> WvDial<*1>: Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0> WvDial Modem<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0> WvDial Modem<*1>: OK> WvDial<*1>: Modem initialized.> WvDial<*1>: Sending: ATDT<7020001033>> WvDial<*1>: Waiting for carrier.> WvDial Modem<*1>: ATDT<7020001033>> WvDial Modem<*1>: CONNECT 460800> WvDial<*1>: Carrier detected. Waiting for prompt.> WvDial Modem<*1>: ** Ascend TNT Terminal Server **> WvDial Modem<*1>: System Password:> WvDial<*1>: Looks like a password prompt.> WvDial<*1>: Sending: (password)> WvDial Modem<*1>: System Password:> WvDial<*1>: Looks like a password prompt.> WvDial<*1>: Sending: (password)> WvDial Modem<*1>: System Password:> WvDial<*1>: Looks like a password prompt.> WvDial<*1>: Sending: (password)> WvDial<Err>: Connected, but carrier signal lost! Retrying...> WvDial<*1>: Sending: ATDT<7020001033>> WvDial<*1>: Waiting for carrier.> WvDial Modem<*1>: ATDT<7020001033>> WvDial Modem<*1>: CONNECT 460800> WvDial<*1>: Carrier detected. Waiting for prompt.> WvDial Modem<*1>: ** Ascend TNT Terminal Server **> WvDial Modem<*1>: System Password:> WvDial<*1>: Looks like a password prompt.> WvDial<*1>: Sending: (password)> WvDial Modem<*1>: System Password:> WvDial<*1>: Looks like a password prompt.> WvDial<*1>: Sending: (password)> WvDial<Notice>: Don't know what to do! Starting pppd and hoping for the> best.> WvDial<Notice>: Starting pppd at Sun Dec 30 13:04:14 2007> WvDial<Notice>: Pid of pppd: 6427> WvDial<*1>: Using interface ppp0> WvDial<*1>: pppd: �[06][08]ț[06][08]> WvDial<*1>: pppd: �[06][08]ț[06][08]> WvDial<*1>: pppd: �[06][08]ț[06][08]> WvDial<*1>: pppd: �[06][08]ț[06][08]> WvDial<*1>: pppd: �[06][08]ț[06][08]> WvDial<*1>: Disconnecting at Sun Dec 30 13:04:19 2007> WvDial<*1>: The PPP daemon has died: Authentication error.> WvDial<*1>: We failed to authenticate ourselves to the peer.> WvDial<*1>: Maybe bad account or password? (exit code = 19)> WvDial<*1>: man pppd explains pppd error codes in more detail.> WvDial<Notice>: I guess that's it for now, exiting> WvDial<Notice>: The PPP daemon has died. (exit code = 19)>>> (GNOMEPPP LOG)> /home/alessandro/.wvdial.conf<Warn>: Ignoring malformed input line: ";Do> NOT edit this file by hand!"> WvDial<*1>: WvDial: Internet dialer version 1.56> WvDial<*1>: Initializing modem.> WvDial<*1>: Sending: ATX3> WvDial Modem<*1>: ATX3> WvDial Modem<*1>: OK> WvDial<*1>: Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0> WvDial Modem<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0> WvDial Modem<*1>: OK> WvDial<*1>: Modem initialized.> WvDial<*1>: Sending: ATM1L1DT7020001033> WvDial<*1>: Waiting for carrier.> WvDial Modem<*1>: ATM1L1DT7020001033> WvDial Modem<*1>: CONNECT 460800> WvDial<*1>: Carrier detected. Waiting for prompt.> WvDial Modem<*1>: ** Ascend TNT Terminal Server **> WvDial Modem<*1>: System Password:> WvDial<*1>: Looks like a password prompt.> WvDial<*1>: Sending: (password)> WvDial Modem<*1>: System Password:> WvDial<*1>: Looks like a password prompt.> WvDial<*1>: Sending: (password)> WvDial Modem<*1>: System Password:> WvDial<*1>: Looks like a password prompt.> WvDial<*1>: Sending: (password)> WvDial<Err>: Connected, but carrier signal lost!> WvDial<*1>: Disconnecting at Sun Dec 30 13:23:02 2007>>>>> On Fri, 2007-12-28 at 19:28 -0500, Marvin Stodolsky wrote:> > Alessandro,> >> > For candidate modem in PCI bus: 00:1b.0> > Class 0403: 8086:284b Audio device: Intel Corporation 82801H> > Primary PCI_id 8086:284b> > Subsystem PCI_id 104d:9005> > has from /proc/asound/card0/codec#1> > --------------------------------------------------------> > Codec: Conexant ID 2c06> > Address: 1> > Vendor Id: 0x14f12c06> > -----------> > in the 104d:9005 Susbsystem.> >> > So> > For owners of a Dell PCs with Conexant HSF modems, a driver source> > package with full speed enabled is available, but requires driver> > compiling. But the Dell package may not yet be competent beyond 2.6.1> > kernels> >> > ALternatively> > From> http://www.linuxant.com/drivers/hsf/full/downloads-ubuntu-x86.php> > download hsfmodem_VersionSpec_k2.6.22_14_generic_ubuntu_i386.deb.zip> > with 2.6.22_14_generic equivalent to> > 2.6.22-14-generic, your kernel version.> > Under Linux unpack with:> > $ unzip hsfmodem*.zip> > Then install with:> > $ sudo dpkg -i hsfmodem*.deb> > Subsequently, the modem should be found with> > $ sudo wvdialconf /etc/wvdial.conf> > Edit in your personal information with:> > $ sudo gedit /etc/wvdial.conf> > and try dialing out with:> > $ sudo wvdial.> > See Testing.txt for details.> >> > MarvS> >> > On Dec 28, 2007 3:57 PM, Alessandro <aricci@xxxxxxx> wrote:> > > Hello everybody,> > >> > > Any chance to use this modem with Ubuntu? Right now I connect to the> > > internet through a home LAN router. That's OK for the DSL but> doesn't> > > apply when I need an analogic line (travelling, fax sending...).> > >> > > Thanks for your help,> > >> > > Alessandro> > >>>
